Solvation of perfluorooctane and octane in water, methanol, acetonitrile, and aqueous mixtures of methanol and acetonitrile

Molecular dynamics simulations are used to examine the local solvation structure of single octane and perfluorooctane molecules in liquid water, methanol, acetonitrile, and aqueous mixtures of methanol and acetonitrile. The motivation is to obtain baseline information about the solvation of perfluorooctane by liquids used as the mobile phase in liquid chromatography and how it differs from the solvation of octane. While octane is uniformly solvated by both water and the second component, perfluorooctane is solvated by methanol and acetonitrile with the exclusion of water from the first solvation layer when the solvent is a mixture.     

The solubilities of nitrous oxide,carbon dioxide,Aliphatic ethers and alcohols,and water in cryogenic liquids

Experimental investigations using IR spectroscopy and a variable pressure cell (up to 30 bar) have shown that nitrous oxide, carbon dioxide and some aliphatic ethers are considerably soluble in liquid nitrogen, liquid oxygen and liquid argon between 77 K and 135 K, with solubilities ranging from 10⁻⁴ mole fraction for nitrous oxide to 10⁻⁸ mole fraction for di-isopropyl ether. The solubility data have been found to be dependent on the temperature of the cryogenic liquid and the molecular structures and properties of the solute and solvent molecules. The solubilities of water, hydrogen sulphide, methanol and ethanol have been found experimentally to be very low, i.e. less than 10⁻⁸ mole fraction in liquid nitrogen, liquid oxygen and liquid argon. These values are considerably lower than those measured previously using gravimetric methods (10⁻⁷ - 10⁻⁵). The experimental solubilities are compared with the predicted values based on the “ideal” and “regular solution” theories. Both theories failed to predict solubilities comparable with the experimental values.     

Vibrational overtone spectroscopy of saturated hydrocarbons dissolved in liquefied Ar, Kr, Xe, and N2

This article presents a collection of vibrational overtone spectra of hydrocarbons in cryogenic solutions. Vibrational overtone spectra of ethane and propane dissolved in liquid argon and n-butane and isobutane dissolved in liquid krypton were recorded between 5000 and 14,000 cm(-1). Spectral regions for the first four overtones were measured using a Fourier transform spectrophotometer. The fifth overtone (Deltaupsilon = 6) spectra were recorded with a double beam (pump-probe) thermal lens technique using concentrations as low as 10-3 mole fraction. We obtained the C-H (Deltaupsilon = 6) spectra of (a) liquid ethane at 100 K and ethane in solutions in liquid Ar at 92 K and liquid N2 at 85 K, (b) liquid propane at 148 K and propane in liquid Ar at 93 K, (c) n-butane in liquid Kr at 129 K, (d) n-pentane in liquid Xe at 160 K, and (e) isobutane liquid at 135 K and isobutane in liquid Kr at 130 K. Local-mode parameters were calculated for primary, secondary, and tertiary C-H oscillators in solution and compared with gas-phase local-mode parameters. The peak frequency shift (Deltaomega) from gas phase to solution is explained by the change in harmonic frequency and anharmonicity in solution with respect to the gas-phase values. The bandwidth (Deltaomega1/2) of the (Deltaupsilon = 6) C-H absorption bands of ethane in solution can be explained in terms of collisions with the solvent molecules.     

Recent analytical methodologies on equilibrium, kinetics, and dynamics at liquid/liquid interface

The form of liquid/liquid interface is flexible and it cannot be fixed at a spatial position. Also the interface is prevented from any physical contact by the organic phase and aqueous phase. In addition, analytical methods operated in vacuo cannot be applied. These restrictions depressed the development of liquid/liquid interfacial chemistry. However, the modification of liquid/liquid interfacial form and original analytical methods have been invented interdependently. The present review classifies the forms of liquid/liquid interface first, and it arrays the related analytical methods with brief explanations. It dominantly deals with recent reports of analytical methodologies, which were published in 2001-2004, on equilibrium, kinetics, and dynamics of substances at liquid/liquid interface, but it also includes historically important studies.     

Development and comparison of liquid–liquid extraction and accelerated solvent extraction methods for quantitative analysis of chloramphenicol,thiamphenicol, florfenicol,and florfenicol amine in poultry eggs

Accelerated solvent extraction was investigated as a novel alternative technology for the separation and quantitative analysis of chloramphenicol, thiamphenicol, florfenicol, and florfenicol amine from poultry eggs, and the results were compared with the results of liquid–liquid extraction. Rapid quantification of the target compounds was carried out by ultra‐performance liquid chromatography‐electrospray ionization tandem triple quadrupole mass spectrometry. This optimized method was validated according to the requirements defined by the European Union and the United States Food and Drug Administration. Finally, the new approach was successfully applied to the quantitative determination of these analytes in 90 commercial poultry eggs from local supermarkets.     

Thickness, stability and contact angle of liquid films on and inside nanofibres, nanotubes and nanochannels

While the stability of liquid films on substrates is a classical topic of colloidal science, the availability of nanostructured materials, such as nanotubes, nanofibres and nanochannels, has raised the question of how the stability of liquid films and their wetting behaviour is affected by nanoscale confinement. This paper will present the conditions for the stability of liquid films on and inside cylindrical solid substrates with nanometre scale characteristic dimensions. It is shown that the stability is determined by an effective disjoining/conjoining pressure isotherm which differs from the corresponding disjoining/conjoining pressure isotherm of flat liquid films on flat solid substrates. From the former, the equilibrium contact angles of drops on an outer or inner surface of a cylindrical capillary have been calculated as a function of surface curvature, showing that the expressions for equilibrium contact angles vary for different geometries, in view of the difference in thickness of the film of uniform thickness with which the bulk liquid (drops or menisci) is at equilibrium. These calculations have been extended to the case of glass nanocapillaries and carbon nanotubes, finding good agreement with experimental results in the literature.     

Infrared multiphoton induced isomerization and dissociation of FCN, ClCN, and BrCN in liquid Ar: a classical simulation study

We report the results of classical mechanics simulations of infrared multiphoton induced control of isomerization of FCN, ClCN, and BrCN in liquid Ar, using ab initio potential energy and dipole moment surfaces for the XCN molecules. The field induced isomerization and fragmentation dynamics of these molecules are found to be different from that of HCN in liquid Ar. In particular, the scheme that provides complete controlled conversion of HCN to CNH in liquid Ar fails to generate complete conversion of XCN to CNX in liquid Ar for X=F,Cl,Br. It is suggested that the sources of the differences in behavior arise from differences in the spectra of vibrational nonlinear resonances in HCN and XCN and to the occurrence of monodromy in the dynamics of the XCN molecules.     

Simulations of the solid, liquid, and melting of 1-n-butyl-4-amino-1,2,4-triazolium bromide

Molecular dynamics simulations are used to study the solid and liquid properties and to predict the melting point of 1-n-propyl-4-amino-1,2,4-triazolium bromide ([patr][Br]) using a force field based on the one developed by Canongia Lopes et al. (J. Phys. Chem. B 2004, 108, 2038) for dialkyl substituted imidazolium salts, which was modified by including terms from the general AMBER force field. Electrostatic charges for the intermolecular interactions were determined from gas-phase ab initio electron structure calculations of the triazolium cation. Simulations of the solid state at 100 K reproduced the experimental density to within 4%. Simulations from 100 K to the melting point and the liquid from 333 to 500 K were performed to determine the temperature dependence of the densities of the two phases. The structures of the solid and liquid phases are characterized with radial distribution functions, which show that there are strong spatial correlations among neighboring ion pairs in liquid [patr][Br]. The dynamic behavior of the ions in the liquid state is also studied by computing velocity autocorrelation functions and the mean-square displacements between the ions. The melting point is determined by simulating void-induced melting. Changes in the density, intermolecular energy, and Lindemann index are used as indicators of the melting transition. The computed melting point is 360 +/- 10 K, which is within 10% of the experimental value 333 K.     

A morphological study of membranes obtained from the systems polylactide-dioxane-methanol,polylactide-dioxane-water and polylactide-N-methyl pyrrolidone-water

The influence of liquid–liquid demixing, solid–liquid demixing, and vitrification on the membrane morphologies obtained from several polylactide-solvent-nonsolvent systems has been investigated. The polymers investigated were the semicrystalline poly-L-lactide (PLLA) and the amorphous poly-DL-lactide (PDLLA). The solvent-nonsolvent systems used were dioxane-water, N-methyl pyrrolidone-water and dioxane-methanol. For each of these systems it was attempted to relate the membrane morphology to the ternary phase diagram at 25°C. It was demonstrated that for the amorphous poly-DL-lactide the intersection of a glass transition and a liquid–liquid miscibility gap in the phase diagram was a prerequisite for the formation of stable membrane structures. For the semicrystalline PLLA a wide variety of morphologies could be obtained ranging from cellular to spherulitical structures. For membrane-forming combinations that show delayed demixing, trends expected on the basis of phase diagrams were in reasonable agreement with the observed membrane morphologies. Only for the rapidly precipitating system PLLA-N-methyl pyrrolidone-water were structures due to liquid–liquid demixing obtained when structures due to solid–liquid demixing were expected. Probably, rapid precipitation conditions promote solid–liquid demixing over liquid–liquid demixing, because the activation energy necessary for liquid–liquid demixing is lower than that for crystallization. © 1996 John Wiley & Sons, Inc.     

Characterization, purification, and analysis of solvent yellow 33 and solvent green 3 dyes

Thin-layer chromatography and high-performance liquid chromatography (HPLC) with linear photodiode array detection (LPDA) were used to separate impurities from two commercial dyes. Gravity flow liquid chromatography was used to purify reference standards of the dyes. Normal phase HPLC with LPDA detection was used to determine purities of submitted samples by comparing responses to those of the reference standards. Electron impact mass spectrometry and nuclear magnetic resonance were utilized to confirm structures of the dyes and their impurities.     

液体弹珠：制备策略、物理性质及应用探索

Liquid marbles (LMs) are liquid droplets coated with a layer of lyophobic particles at the air-liquid interface. Since the pioneering work by Aussillous et al. in 2001, LMs have attracted significant attention owing to their facile fabrication, flexibility in the choice of the constituent particles and liquids, intriguing properties such as non-wetting and non-adhesive nature, satisfactory elasticity and stability, as well as promising applications in microfluidics, sensors, controlled release, and microreactors. The classical strategy for the preparation of LMs involves rolling a small volume of a droplet on a lyophobic powder bed for complete encapsulation of the liquid by the particles. In addition, various innovative methods, including electrostatic and coalescent approaches, have been developed for preparing special LMs with a complicated structure or morphology. Diverse materials such as water, surfactant solutions, liquid metals, reagents, blood, and even viscous adhesives have been employed as the internal liquid for the fabrication of LMs. Theoretically, any particulates such as lycopodium, polytetrafluoroethylene, Fe₃O₄, SiO₂, and graphite grains can be employed as the outer coating, but they are usually required to be lyophobic with sizes of less than hundreds of microns. The unique structure of the particle-covered droplet and the dual solid-liquid characteristics endow LMs with some unique and interesting properties, especially the non-wetting and non-adhesive nature. As the lyophobic coating particles restrain the internal liquid from contacting the substrate, LMs can move easily across either solid or liquid surfaces, neither wetting the substrate nor contaminating the internal liquid. An equally fascinating property of LMs is their satisfactory stability, which is necessary for most of their applications. The high stability of LMs stems from the protection of the coating powders and is embodied in both good mechanical stability (remaining intact after being released from a certain height or under a certain compression) and long lifetime (greatly suppressing the evaporation of the internal liquid). These extraordinary properties make LMs promising candidates for use in multitudinous fields, especially droplet microfluidics and microreactors. The potential application of LMs in microfluidics is ascribed to their non-wetting, non-adhesive nature and other features such as an ability to float on a liquid surface, coalescence, split, a small force of rolling friction, and response to external forces. Notably, LMs hold great promise for applications in microreactions, because they can create a confined reaction microenvironment, minimize reagent usage, facilitate unhindered gas exchange between the internal liquid medium and the surrounding environment, and allow the entry/exit of the reactants/products. We herein review the recent advances in LMs, such as manufacturing techniques, formation mechanisms, physical properties, and emerging applications. In particular, much attention is paid to the factors affecting the stability of LMs and the potential strategies to increase their stability. Moreover, this review discusses the challenges in the future development of LMs, suggests several possible ways of addressing these challenges, and forecasts the future development directions. We believe that this review can help researchers gain a better understanding of LMs and promote their further advances.     

Liquid interfacial nanoarchitectonics: Molecular machines,organic semiconductors,nanocarbons, stem cells,and others

The concept of nanoarchitectonics has been proposed as an extensional development of nanotechnology through fusions with material science and the other fields. In nanoarchitectonics, nano-units of atoms, molecules, and nanomaterials are architected into construction of functional material systems. In order to assemble intended structures or hierarchical structures from nano-units, it is more useful to confine nano-units at the interface. In addition, nanoarchitectonics is expected to output functions by harmonizing many units in dynamic environments. However, the liquid interfaces still have lots of unexplored matters in nanoscale because supports by advanced apparatus and techniques in nanotechnology are not always available. Specifically, this review paper summarizes examples of research on molecular manipulation, molecular arrangement and assembly, materials synthesis, and life manipulation at the liquid interface. These examples demonstrate that the liquid interface enables the control of dynamic functions of various size regions, from molecular-level phenomena such as the control of molecular machines to techniques of living creature size such as the control of stem cell differentiation. Liquid interfaces are very useful environments for controlling dynamic functions for a wide range of targets and would have tremendous potential in terms of functional exploration. The great potential of nanoarchitectonics at the liquid interface and the challenges to be solved in the future are also discussed.     

Anisotropic networks, elastomers and gels

Anisotropic networks, elastomers and gels exhibit piezoelectric, pyroelectric, ferroelectric and NLO properties of potential interest for use communication and processing technologies. The formation, properties and applications of such anisotropic, mainly liquid crystalline, networks are described. If some of the molecules in a liquid mixture contain at least two reactive groups which can be either photochemically or thermally polymerized, then crosslinked, anisotropic networks, elastomers and gels can be produced. Solid macroscopically aligned elastomers or networks can be formed as required beforehand or simultaneously by orientation of the sample. Anisotropic gels consist of a solid anisotropic network and non-covalently bonded, but strongly oriented domains of low molar mass liquid crystals. Anisotropic networks, elastomers preformed amorphous or liquid crystalline polymers incorporating additional reactive groups, which can be macroscopically oriented in the additional crosslinking reactions. Reversible networks, elastomers and gels can be prepared either non-covalently or covalently by thermally side group polymers and low molar mass molecules, liquid crystalline properties in the pure state. in many electro-optic devices for optical and gels can be prepared from liquid crystalline state and then fixed by reversible linkages between, for example, neither of which necessarily exhibit     

Solubility of phosphonium ionic liquid in alcohols, benzene, and alkylbenzenes

The (solid + liquid) phase equilibria and (liquid + liquid) phase equilibria of binary mixtures containing quaternary phosphonium salt-tetrabutylphosphonium methanesulfonate and alcohols or alkylbenzenes were investigated. The systems {[(CH(3)CH(2)CH(2)CH(2))4P][CH(3)SO(3)] + 1-butanol, or 1-hexanol, 1-octanol, 1-decanol, or 1-dodecanol} and {[(CH(3)CH(2)CH(2)CH(2))4P][CH(3)SO(3)] + benzene, or toluene, ethylbenzene, or propylbenzene} have been measured by a dynamic method at a wide range of temperatures from 220 to 386 K. Solid-liquid equilibria with immiscibility in the liquid phase were detected with the aromatic hydrocarbons ethylbenzene and propylbenzene. The basic thermodynamic properties of pure ionic liquid--the melting point, enthalpy of fusion, enthalpy of solid-solid-phase transition, and glass transition--have been determined by differential scanning calorimetry. The experimental data of systems with alcohols were correlated by means of the UNIQUAC ASM and NRTL1 equations and of systems with alkylbenzenes with Wilson and NRTL equations utilizing parameters derived from the (solid + liquid) equilibrium. The root-mean-square deviations of the solubility temperatures for all calculated data are dependent upon the particular system and the particular equation used.     

Application of an efficient strategy based on liquid–liquid extraction,high‐speed counter‐current chromatography,and preparative HPLC for the rapid enrichment,separation, and purification of four anthraquinones from Rheum tanguticum

This study presents an efficient strategy based on liquid–liquid extraction, high‐speed counter‐current chromatography, and preparative HPLC for the rapid enrichment, separation, and purification of four anthraquinones from Rheum tanguticum. A new solvent system composed of petroleum ether/ethyl acetate/water (4:2:1, v/v/v) was developed for the liquid–liquid extraction of the crude extract from R. tanguticum. As a result, emodin, aloe‐emodin, physcion, and chrysophanol were greatly enriched in the organic layer. In addition, an efficient method was successfully established to separate and purify the above anthraquinones by high‐speed counter‐current chromatography and preparative HPLC. This study supplies a new alternative method for the rapid enrichment, separation, and purification of emodin, aloe‐emodin, physcione, and chrysophanol.     

Electrocatalytic reactions mediated by N,N,N',N'-Tetraalkyl-1,4-phenylenediamine redox liquid microdroplet-modified electrodes: chemical and photochemical reactions In, and At the surface of, femtoliter droplets

The electro-oxidation of electrolytically unsupported ensembles of N,N-diethyl-N',N'-dialkyl-para-phenylenediamine (DEDRPD, R = n-butyl, n-hexyl, and n-heptyl) redox liquid femtoliter volume droplets immobilized on a basal plane pyrolytic graphite electrode is reported in the presence of aqueous electrolytes. Electron transfer at these redox liquid modified electrodes is initiated at the microdroplet-electrode-electrolyte three-phase boundary. Dependent on both the lipophilicity of the redox oil and that of the aqueous electrolyte, ion uptake into or expulsion from the organic deposits is induced electrolytically. In the case of hydrophobic electrolytes, redox-active ionic liquids are synthesized, which are shown to catalyze the oxidation of l-ascorbic acid over the surface of the droplets. In contrast, the photoelectrochemical reduction of the anaesthetic reagent halothane proceeds within the droplet deposits and is mediated by the ionic liquid precursor (the DEDRPD oil).     

Ethanol, acetic acid, and water adsorption from binary and ternary liquid mixtures on high-silica zeolites

Adsorption isotherms were measured for ethanol, acetic acid, and water adsorbed on high-silica ZSM-5 zeolite powder from binary and ternary liquid mixtures at room temperature. Ethanol and water adsorption on two high-silica ZSM-5 zeolites with different aluminum contents and a high-silica beta zeolite were also compared. The amounts adsorbed were measured using a recently developed technique that accurately measures the changes in adsorbent/liquid mixture density and liquid concentration. This technique allows the adsorption of each compound in a liquid mixture to be measured. Adsorption data for binary mixtures were fit with the dual-site extended Langmuir model, and the parameters were used to predict ternary adsorption isotherms for each compound with reasonable accuracy. In ternary mixtures, acetic acid competed with ethanol and water for adsorption sites and reduced ethanol adsorption more than it reduced water adsorption.     

Determination of Diketopiperazine Alkaloids of the Roquefortine Group by UV Spectroscopy, Thin-Layer Chromatography, and High-Performance Liquid Chromatography

Electronic absorption spectra and the chromatographic retention of six alkaloids from the roquefortine group under conditions of thin-layer chromatography and high-performance liquid chromatography were examined. The applicability of these techniques to the identification of diketopiperazine alkaloids in culture liquid extracts was demonstrated using the fungusPenicillium chrysogenumVKM F-1987 as an example.     

Study of the Production of Hydrogen and Light Hydrocarbons by Spark Discharges in Diesel, Kerosene, Gasoline, and Methane

Reforming liquid fuels into hydrogen and light hydrocarbons is desirable for improving the combustion characteristics of the fuels and the production of reducing agents for applications such as the removal of nitrogen oxides. In this study, diesel, kerosene, gasoline and methane were reformed by spark discharges between needle and plate electrodes at room temperature and atmospheric pressure. The gaseous products from liquid fuels comprised 65–70 % hydrogen and 30–35 % light hydrocarbons having two carbon atoms per molecule (i.e., C2s), or three carbon atoms per molecule (i.e., C3s). The product gases were 90 % hydrogen and 10 % C2s in the case of methane reforming. The energy efficiency for the production of gaseous products was highest in the case of gasoline at 3.8 mol/kWh, followed by kerosene, diesel and methane at 3.2, 3.0, and 2.4 mol/kWh, respectively. These results were found to be comparable to those reported by others for the reforming of pure hydrocarbons by plasmas in liquids. The liquid fuels turned black due to the formation of carbonaceous products, some of which could be filtered out as solid carbon particles, but others remained dissolved and imparted color to the treated liquid.     

Aggregation Mode,Host-Guest Chemistry in Water,and Extraction Capability of an Uncharged,Water-Soluble,Liquid Pillar[5]arene Derivative

An uncharged, water-soluble per-ethylene-glycol pillar[5]arene derivative ( 1 ) was synthesized and its aggregation mode, host-guest chemistry in water and extraction ability was explored. Compound 1 is a liquid at room temperature; in water, limited self-aggregation occurred at high concentrations as deduced from diffusion NMR and dynamic light scattering. Compound 1 forms pseudo-rotaxane-like 1 : 1 host-guest complexes with 1,ω-di-substituted alkanes with association constants on the order of 10³–10⁴ m ⁻¹. Interestingly, NMR experiments showed that the guest location relative to the host ring system differs among the different complexes. In proof-of-concept experiments, compound 1 was shown to extract structurally related organic compounds from benzene into water with significant selectivity. Compound 1 , which is a liquid at room temperature and has only limited interactions with its side arms, can, in principle, be regarded as a complement to or as a kind of type I porous liquid.