In-Situ-Formed Potassium-Modified Nickel-Zinc Carbide Boosts Production of Higher Alcohols beyond CH4 in CO2 Hydrogenation

Ni-based catalysts have been widely studied in the hydrogenation of CO₂ to CH₄, but selective and efficient synthesis of higher alcohols (C₂₊OH) from CO₂ hydrogenation over Ni-based catalyst is still challenging due to successive hydrogenation of C1 intermediates leading to methanation. Herein, we report an unprecedented synthesis of C₂₊OH from CO₂ hydrogenation over K-modified Ni−Zn bimetal catalyst with promising activity and selectivity. Systematic experiments (including XRD, in situ spectroscopic characterization) and computational studies reveal the in situ generation of an active K-modified Ni−Zn carbide (K-Ni₃Zn₁C_0.7) by carburization of Zn-incorporated Ni⁰, which can significantly enhance CO₂ adsorption and the surface coverage of alkyl intermediates, and boost the C−C coupling to C₂₊OH rather than conventional CH₄. This work opens a new catalytic avenue toward CO₂ hydrogenation to C₂₊OH, and also provides an insightful example for the rational design of selective and efficient Ni-based catalysts for CO₂ hydrogenation to multiple carbon products.     

Generation and Stabilization of a Dinickel Catalyst in a Metal-Organic Framework for Selective Hydrogenation Reactions

Although many monometallic active sites have been installed in metal–organic frameworks (MOFs) for catalytic reactions, there are no effective strategies to generate bimetallic catalysts in MOFs. Here we report the synthesis of a robust, efficient, and reusable MOF catalyst, MOF-NiH, by adaptively generating and stabilizing dinickel active sites using the bipyridine groups in MOF-253 with the formula of Al(OH)(2,2′-bipyridine-5,5′-dicarboxylate) for Z-selective semihydrogenation of alkynes and selective hydrogenation of C=C bonds in α,β-unsaturated aldehydes and ketones. Spectroscopic studies established the dinickel complex (bpy⋅⁻)Ni^II(μ₂-H)₂Ni^II(bpy⋅⁻) as the active catalyst. MOF-NiH efficiently catalyzed selective hydrogenation reactions with turnover numbers of up to 192 and could be used in five cycles of hydrogenation reactions without catalyst leaching or significant decrease of catalytic activities. The present work uncovers a synthetic strategy toward solution-inaccessible Earth-abundant bimetallic MOF catalysts for sustainable catalysis.     

Non-Interacting Ni and Fe Dual-Atom Pair Sites in N-Doped Carbon Catalysts for Efficient Concentrating Solar-Driven Photothermal CO2 Reduction

Solar-to-chemical energy conversion under weak solar irradiation is generally difficult to meet the heat demand of CO₂ reduction. Herein, a new concentrated solar-driven photothermal system coupling a dual-metal single-atom catalyst (DSAC) with adjacent Ni−N₄ and Fe−N₄ pair sites is designed for boosting gas-solid CO₂ reduction with H₂O under simulated solar irradiation, even under ambient sunlight. As expected, the (Ni, Fe)−N−C DSAC exhibits a superior photothermal catalytic performance for CO₂ reduction to CO (86.16 μmol g⁻¹ h⁻¹), CH₄ (135.35 μmol g⁻¹ h⁻¹) and CH₃OH (59.81 μmol g⁻¹ h⁻¹), which are equivalent to 1.70-fold, 1.27-fold and 1.23-fold higher than those of the Fe−N−C catalyst, respectively. Based on theoretical simulations, the Fermi level and d-band center of Fe atom is efficiently regulated in non-interacting Ni and Fe dual-atom pair sites with electronic interaction through electron orbital hybridization on (Ni, Fe)−N−C DSAC. Crucially, the distance between adjacent Ni and Fe atoms of the Ni−N−N−Fe configuration means that the additional Ni atom as a new active site contributes to the main *COOH and *HCO₃ dissociation to optimize the corresponding energy barriers in the reaction process, leading to specific dual reaction pathways (COOH and HCO₃ pathways) for solar-driven photothermal CO₂ reduction to initial CO production.     

The Parent Cyclopentadienyltin Cation,Its Toluene Adduct,and the Quadruple‐Decker [Sn3Cp4]2+

Truly cationic metallocenes with the parent cyclopentadienyl ligand are so far unknown for the Group 14 elements. Herein we report on an almost “naked” [SnCp]⁺ cation with the weakly coordinating [Al{OC(CF₃)₃}₄]⁻ and [{(F₃C)₃CO}₃Al−F−Al{OC(CF₃)₃}₃]⁻ anions. [SnCp][Al{OC(CF₃)₃}₄] was used to prepare the first main‐group quadruple‐decker cation [Sn₃Cp₄]²⁺ again as the [Al{OC(CF₃)₃}₄]⁻ salt. Additionally, the toluene adduct [CpSn(C₇H₈)][Al{OC(CF₃)₃}₄] was obtained.     

The Parent Cyclopentadienyltin Cation,Its Toluene Adduct,and the Quadruple‐Decker [Sn3Cp4]2+

Truly cationic metallocenes with the parent cyclopentadienyl ligand are so far unknown for the Group 14 elements. Herein we report on an almost “naked” [SnCp]⁺ cation with the weakly coordinating [Al{OC(CF₃)₃}₄]⁻ and [{(F₃C)₃CO}₃Al−F−Al{OC(CF₃)₃}₃]⁻ anions. [SnCp][Al{OC(CF₃)₃}₄] was used to prepare the first main‐group quadruple‐decker cation [Sn₃Cp₄]²⁺ again as the [Al{OC(CF₃)₃}₄]⁻ salt. Additionally, the toluene adduct [CpSn(C₇H₈)][Al{OC(CF₃)₃}₄] was obtained.     

Stabilizing Sulfur Sites in Tetraoxygen Tetrahedral Coordination Structure for Efficient Electrochemical Water Oxidation

Ion regulation strategy is regarded as a promising pathway for designing transition metal oxide-based electrocatalysts for oxygen evolution reaction (OER) with improved activity and stability. Precise anion conditioning can accurately change the anionic environment so that the acid radical ions (SO₄²⁻, PO₃²⁻, SeO₄²⁻, etc.), regardless of their state (inside the catalyst, on the catalyst surface, or in the electrolyte), can optimize the electronic structure of the cationic active site and further increase the catalytic activity. Herein, we report a new approach to encapsulate S atoms at the tetrahedral sites of the NaCl-type oxide NiO to form a tetraoxo-tetrahedral coordination structure (S-O₄) inside the NiO (S-NiO -I). Density functional theory (DFT) calculations and operando vibrational spectroscopy proves that this kind of unique structure could achieve the S-O₄ and Ni-S stable structure in S-NiO-I. Combining mass spectroscopy characterization, it could be confirmed that the S-O₄ structure is the key factor for triggering the lattice oxygen exchange to participate in the OER process. This work demonstrates that the formation of tetraoxygen tetrahedral structure is a generalized key for boosting the OER performances of transition metal oxides.     

Ligand Modulation of Active Sites to Promote Cobalt-Doped 1T-MoS2 Electrocatalytic Hydrogen Evolution in Alkaline Media

Highly efficient hydrogen evolution reaction (HER) electrocatalyst will determine the mass distributions of hydrogen-powered clean technologies, while still faces grand challenges. In this work, a synergistic ligand modulation plus Co doping strategy is applied to 1T−MoS₂ catalyst via CoMo-metal-organic frameworks precursors, boosting the HER catalytic activity and durability of 1T−MoS₂. Confirmed by Cs corrected transmission electron microscope and X-ray absorption spectroscopy, the polydentate 1,2-bis(4-pyridyl)ethane ligand can stably link with two-dimensional 1T−MoS₂ layers through cobalt sites to expand interlayer spacing of MoS₂ (Co−1T−MoS₂-bpe), which promotes active site exposure, accelerates water dissociation, and optimizes the adsorption and desorption of H in alkaline HER processes. Theoretical calculations indicate the promotions in the electronic structure of 1T−MoS₂ originate in the formation of three-dimensional metal-organic constructs by linking π-conjugated ligand, which weakens the hybridization between Mo-3d and S-2p orbitals, and in turn makes S-2p orbital more suitable for hybridization with H-1s orbital. Therefore, Co−1T−MoS₂-bpe exhibits excellent stability and exceedingly low overpotential for alkaline HER (118 mV at 10 mA cm⁻²). In addition, integrated into an anion-exchange membrane water electrolyzer, Co−1T−MoS₂-bpe is much superior to the Pt/C catalyst at the large current densities. This study provides a feasible ligand modulation strategy for designs of two-dimensional catalysts.     

Catalytic Active Site for NO Decomposition Elucidated by Surface Science and Real Catalyst

Comprehensive studies combining surface science and real catalyst were performed to get further insight into catalytic active site and reaction mechanism for NO decomposition over supported palladium and cobalt oxide-based catalysts. On palladium single-crystal model catalysts, adsorption, dissociation and desorption behavior of NO was found to be closely related to the surface structures, the stepped surface palladium being active for dissociation of NO. In accordance with this result, the activity of powder Pd/Al₂O₃ catalysts for NO decomposition was directly related to the number of step sites exposed on the surface, suggesting that the step sites act as the catalytic active site for NO decomposition on Pd/Al₂O₃. NO decomposition over cobalt oxide was found to be significantly promoted by addition of alkali metals. Surface science study and catalyst characterization led to the same conclusion that the interface between the alkali metal and Co₃O₄ serves as the catalytic active site. From the results of in situ Fourier transform infrared (FT-IR) spectroscopy and isotopic transient kinetic analysis, a reaction mechanism was proposed in which the reaction is initiated by NO adsorption onto alkali metals to form NO₂⁻ species and then NO₂⁻ species react with the adsorbed NO species to form N₂ over the interface between the alkali metal and Co₃O₄.     

磁性纳米粒子Fe3O4@PEI@Ru(OH)x催化的分子氧氧化醇-克脑文格尔串联反应

以聚乙烯亚胺改性的四氧化三铁纳米粒子为载体负载Ru(OH)_x得到负载钌催化剂Fe_3O_4@PEI@Ru(OH)_x.该催化剂在分子氧氧化醇-克脑文格尔缩合"一锅"串联反应中显示优良的催化性能,多种结构的醇被选择性地氧化为相应的醛进而与活性亚甲基化合物缩合生成相应的缩合产物.采用外磁铁可以很容易地将催化剂与反应混合物分离,实现催化剂的回收.然而,该催化剂的循环使用性能较差.电感耦合等离子体原子发射光谱(ICP-OES)分析证明催化剂在反应过程中没有发生钌的流失.X射线光电子能谱(XPS)分析发现催化剂失活是由于反应过程中活性的Ru~(3+)被部分地氧化为非活性的Ru~(4+)所致.     

Uncovering selective and active Ga surface sites in gallia–alumina mixed-oxide propane dehydrogenation catalysts by dynamic nuclear polarization surface enhanced NMR spectroscopy

Gallia–alumina (Ga,Al)₂O_3(x : y) spinel-type solid solution nanoparticle catalysts for propane dehydrogenation (PDH) were prepared with four nominal Ga : Al atomic ratios (1 : 6, 1 : 3, 3 : 1, 1 : 0) using a colloidal synthesis approach. The structure, coordination environment and distribution of Ga and Al sites in these materials were investigated by X-ray diffraction, X-ray absorption spectroscopy (Ga K-edge) as well as ²⁷Al and ⁷¹Ga solid state nuclear magnetic resonance. The surface acidity (Lewis or Brønsted) was probed using infrared spectroscopy with pyridine and 2,6-dimethylpyridine probe molecules, complemented by element-specific insights (Ga or Al) from dynamic nuclear polarization surface enhanced cross-polarization magic angle spinning ¹⁵N{²⁷Al} and ¹⁵N{⁷¹Ga} J coupling mediated heteronuclear multiple quantum correlation NMR experiments using ¹⁵N-labelled pyridine as a probe molecule. The latter approach provides unique insights into the nature and relative strength of the surface acid sites as it allows to distinguish contributions from Al and Ga sites to the overall surface acidity of mixed (Ga,Al)₂O₃ oxides. Notably, we demonstrate that (Ga,Al)₂O₃ catalysts with a high Al content show a greater relative abundance of four-coordinated Ga sites and a greater relative fraction of weak/medium Ga-based surface Lewis acid sites, which correlates with superior propene selectivity, Ga-based activity, and stability in PDH (due to lower coking). In contrast, (Ga,Al)₂O₃ catalysts with a lower Al content feature a higher fraction of six-coordinated Ga sites, as well as more abundant Ga-based strong surface Lewis acid sites, which deactivate through coking. Overall, the results show that the relative abundance and strength of Ga-based surface Lewis acid sites can be tuned by optimizing the bulk Ga : Al atomic ratio, thus providing an effective measure for a rational control of the catalyst performance.

Coordination geometry and Lewis acidity of Ga and Al (bulk and surface) sites in mixed oxide gallia–alumina nanoparticles is correlated with the performance in propane dehydrogenation.     

Solar-Driven CO2 Conversion via Optimized Photothermal Catalysis in a Lotus Pod Structure

Photothermal CO₂ reduction is one of the most promising routes to efficiently utilize solar energy for fuel production at high rates. However, this reaction is currently limited by underdeveloped catalysts with low photothermal conversion efficiency, insufficient exposure of active sites, low active material loading, and high material cost. Herein, we report a potassium-modified carbon-supported cobalt (K⁺−Co−C) catalyst mimicking the structure of a lotus pod that addresses these challenges. As a result of the designed lotus-pod structure which features an efficient photothermal C substrate with hierarchical pores, an intimate Co/C interface with covalent bonding, and exposed Co catalytic sites with optimized CO binding strength, the K⁺−Co−C catalyst shows a record-high photothermal CO₂ hydrogenation rate of 758 mmol g_cat⁻¹ h⁻¹ (2871 mmol g_Co⁻¹ h⁻¹) with a 99.8 % selectivity for CO, three orders of magnitude higher than typical photochemical CO₂ reduction reactions. We further demonstrate with this catalyst effective CO₂ conversion under natural sunlight one hour before sunset during the winter season, putting forward an important step towards practical solar fuel production.     

Synergistic Metal-Nonmetal Active Sites in a Metal-Organic Cage for Efficient Photocatalytic Synthesis of Hydrogen Peroxide in Pure Water

Photocatalytic synthesis of hydrogen peroxide (H₂O₂) is a potential clean method, but the long distance between the oxidation and reduction sites in photocatalysts hinders the rapid transfer of photogenerated charges, limiting the improvement of its performance. Here, a metal-organic cage photocatalyst, Co₁₄(L−CH₃)₂₄ , is constructed by directly coordinating metal sites (Co sites) used for the O₂ reduction reaction (ORR) with non-metallic sites (imidazole sites of ligands) used for the H₂O oxidation reaction (WOR), which shortens the transport path of photogenerated electrons and holes, and improves the transport efficiency of charges and activity of the photocatalyst. Therefore, it can be used as an efficient photocatalyst with a rate of as high as 146.6 μmol g⁻¹ h⁻¹ for H₂O₂ production under O₂-saturated pure water without sacrificial agents. Significantly, the combination of photocatalytic experiments and theoretical calculations proves that the functionalized modification of ligands is more conducive to adsorbing key intermediates (*OH for WOR and *HOOH for ORR), resulting in better performance. This work proposed a new catalytic strategy for the first time; i.e., to build a synergistic metal-nonmetal active site in the crystalline catalyst and use the host–guest chemistry inherent in the metal-organic cage (MOC)to increase the contact between the substrate and the catalytically active site, and finally achieve efficient photocatalytic H₂O₂ synthesis.     

Highly Efficient Transfer Hydrogenation Catalysis with Tailored Pyridylidene Amide Pincer Ruthenium Complexes

The rational optimization of homogeneous catalysts requires ligand platforms that are easily tailored to improve catalytic performance. Here, it is demonstrated that pyridylidene amides (PYAs) provide such a platform to custom-shape transfer hydrogenation catalysts with exceptional activity. Specifically, a series of meta-PYA pincer ligands with differently substituted PYA units has been synthezised and coordinated to ruthenium(II) centres to form bench-stable tris-acetonitrile complexes [Ru(R-PYA-pincer)(MeCN)₃](PF₆)₂ (R=OMe, Me, H, Cl, CF₃). Analytic studies including ¹H NMR spectroscopy, cyclic voltammetry, and X-ray crystallography reveal a direct influence of the substituents on the electronic properties of the ruthenium center. The complexes are active in the catalytic transfer hydrogenation of ketones, with activities directly encoded by the PYA substitution pattern. Their perfomance improves further upon exchange of an ancillary MeCN ligand with PPh₃. While complexes [Ru(R-PYA-pincer)(PPh₃)(MeCN)₂](PF₆)₂ were only isolated for R=H, Me, an in situ protocol was developed to generate these complexes in situ for R=OMe, Cl, CF₃ by using a 1:2 ratio of the complexes and PPh₃. This in situ protocol together with a short catalyst pre-activation provided highly active catalytic systems. The most active pre-catalyst featured the methoxy-substituted PYA ligand and reached turnover frenquencies of 210 000 h⁻¹ under an exceptionally low catalyst loading of 25 ppm for the benchmark substrate benzophenone, representing one of the most active transfer hydrogenation systems known to date.     

Synthesis and Structural Characterization of Gallium(I) and Indium(I) Cations Coordinated by Pentamethylethylenediamine

Herein we report on the facile access to a Ga^I and In^I complex salt of pentamethyldiethylenetriamine (PMDTA) with the weakly coordinating counterion [Al(OR^F)₄]^– [R^F = C(CF₃)₃]. Thus, the low temperature reaction of [M(PhF)₂]⁺ (M = Ga, In) solutions in 1,2-F₂C₆H₄ (oDFB) with PMDTA yielded the title compounds M(PMDTA)⁺[Al(OR^F)₄]^– (M = Ga 1 , in 2 ) in non-optimized yields. Both compounds are highly sensitive towards air and moisture, have a rather limited lifetime at room temperature, but were structurally characterized.     

双分子水和氨气催化CF3OH分子裂解的理论研究

The G3 and CBS-QB3 theoretical methods are employed to study the decomposition of CF₃OH into FCFO and HF by water, water dimmer, and ammonia. The decomposition of CF₃OH into FCFO and HF is unlikely to occur in the atmosphere due to the high activated energy of 88.7 kJ/mol at the G3 level of theory. However, the computed results predict that the barrier for unimolecular decomposition of CF₃OH is decreased to 25.1 kJ/mol from 188.7 kJ/mol with the aid of NH₃ at the G3 level of theory, which shows that the ammonia play a strong catalytic effect on the split of CF₃OH. In addition, the calculated rate constants show that the decomposition of CF₃OH by NH₃ is faster than those of H₂O and the water dimmer by 109 and 105 times respectively. The rate constants combined with the corresponding concentrations of these species demonstrate that the reaction CF₃OH with NH₃ via TS4 is of great importance for the decomposition of CF₃OH in the atmosphere.     

Al含量对Pt-SO2-4 /ZrO2-Al2O3固体超强酸催化

通过向SO^2-₄ /ZrO₂催化剂中同时引入适量的Pt和Al₂O₃, 制备出了具有较高催化性能和稳定性的Pt-SO^2-₄ /ZrO₂-Al₂O₃型固体超强酸催化剂. 以正戊烷异构化反应为探针, 考察了Al含量对催化剂性能的影响; 并采用X射线衍射(XRD)、比表面积测定(BET)、红外(IR)光谱、程序升温还原(TPR)、热重-差热分析(TG-DTA)和氨-程序升温脱附(NH₃-TPD)手段对催化剂进行了表征. 结果表明, Al能够提高ZrO₂的晶化温度, 抑制硫的分解, 增加催化剂的比表面积, 增强硫氧键的结合, 提高催化剂的还原性能, 增加催化剂的酸强度和酸总量. 当Al₂O₃含量(质量分数, w)为5.0%时, Pt-SO^2-₄ /ZrO₂-Al₂O₃固体超强酸催化剂的催化活性最好, 在100 h内异戊烷收率可稳定在52.0%以上, 选择性在98.2%以上.     

四丙基氢氧化铵改性纳米HZSM-5分子筛及其在甲醇制汽油中的催化性能

采用四丙基氢氧化铵(TPAOH)溶液对纳米ZSM-5分子筛进行改性, 运用X射线衍射、扫描电镜、²⁷Al和²⁹Si固体核磁、X射线光电子能谱、N₂物理吸附脱附法和NH₃程序升温脱附等手段对所制样品进行了表征, 并评价了其催化甲醇制汽油反应性能. 结果表明, 改性后的HZSM-5相对结晶度增加, 晶体形貌更加规整, 表面硅铝比增加, 比表面积和微孔表面积增大, 强酸位酸量增多. 同时, TPAOH改性不仅可以使分子筛脱硅脱铝, 而且伴有二次晶化补硅补铝, 改变了分子筛的硅铝分布. 改性的HZSM-5在甲醇制汽油反应中的稳定性大幅度提高, 其寿命由70h增至170h以上, 随着TPAOH处理时间的增加, 催化剂寿命增加, 氢转移反应加快, 导致油相产品中异构烷烃增多, 烯烃减少.     

On the synergistic catalytic properties of bimetallic mesoporous materials containing aluminum and zirconium: the Prins cyclisation of citronellal

Bimetallic three‐dimensional amorphous mesoporous materials, Al‐Zr‐TUD‐1 materials, were synthesised by using a surfactant‐free, one‐pot procedure employing triethanolamine (TEA) as a complexing reagent. The amount of aluminium and zirconium was varied in order to study the effect of these metals on the Brønsted and Lewis acidity, as well as on the resulting catalytic activity of the material. The materials were characterised by various techniques, including elemental analysis, X‐ray diffraction, high‐resolution TEM, N₂ physisorption, temperature‐programmed desorption (TPD) of NH₃, and ²⁷Al MAS NMR, XPS and FT‐IR spectroscopy using pyridine and CO as probe molecules. Al‐Zr‐TUD‐1 materials are mesoporous with surface areas ranging from 700–900 m² g^?1, an average pore size of around 4 nm and a pore volume of around 0.70 cm³ g^?1. The synthesised Al‐Zr‐TUD‐1 materials were tested as catalyst materials in the Lewis acid catalysed Meerwein–Ponndorf–Verley reduction of 4‐tert‐butylcyclohexanone, the intermolecular Prins synthesis of nopol and in the intramolecular Prins cyclisation of citronellal. Although Al‐Zr‐TUD‐1 catalysts possess a lower amount of acid sites than their monometallic counterparts, according to TPD of NH₃, these materials outperformed those of the monometallic Al‐TUD‐1 as well as Zr‐TUD‐1 in the Prins cyclisation of citronellal. This proves the existence of synergistic properties of Al‐Zr‐TUD‐1. Due to the intramolecular nature of the Prins cyclisation of citronellal, the hydrophilic surface of the catalyst as well as the presence of both Brønsted and Lewis acid sites synergy could be obtained with bimetallic Al‐Zr‐TUD‐1. Besides spectroscopic investigation of the active sites of the catalyst material a thorough testing of the catalyst in different types of reactions is crucial in identifying its specific active sites.     

ZnSO4和La2O3作共修饰剂单金属Ru催化剂上苯选择加氢制环己烯

用沉淀法制备了单金属纳米Ru（0）催化剂,考察了ZnSO₄和La₂O₃作共修饰剂对该催化剂催化苯选择加氢制环己烯性能的影响,并用X射线衍射（XRD）、X射线荧光（XRF）光谱、X射线光电子能谱（XPS）、俄歇电子能谱（AES）、透射电镜（TEM）和N₂物理吸附等手段对加氢前后催化剂进行了表征. 结果表明,在ZnSO₄存在下,随着添加碱性La₂O₃量的增加,ZnSO₄水解生成的（Zn（OH）₂）₃（ZnSO₄）（H₂O）_x（x=1,3）盐量增加,催化剂活性单调降低,环己烯选择性单调升高. 当La₂O₃/Ru 物质的量比为0.075 时,Ru催化剂上苯转化率为77.6%,环己烯选择性和收率分别为75.2%和58.4%. 且该催化体系具有良好的重复使用性能. 传质计算结果表明,苯、环己烯和氢气的液-固扩散限制和孔内扩散限制都可忽略. 因此,高环己烯选择性和收率的获得不能简单归结为物理效应,而与催化剂的结构和催化体系密切相关. 根据实验结果,我们推测在化学吸附有（Zn（OH）₂）₃（ZnSO₄）（H₂O）_x（x=1,3）盐的Ru（0）催化剂有两种活化苯的活性位：Ru⁰和Zn²⁺. 因为Zn²⁺将部分电子转移给了Ru,Zn²⁺活化苯的能力比Ru⁰弱. 同时由于Ru和Zn²⁺的原子半径接近,Zn²⁺可以覆盖一部分Ru⁰活性位,导致解离H₂的Ru⁰活性位减少. 这导致了Zn²⁺上活化的苯只能加氢生成环己烯和Ru（0）催化剂活性的降低. 本文利用双活性位模型来解释Ru基催化剂上的苯加氢反应,并用Hückel分子轨道理论说明了该模型的合理性.     

Understanding Synergistic Catalysis on Cu-Se Dual Atom Sites via Operando X-ray Absorption Spectroscopy in Oxygen Reduction Reaction

The construction and understanding of synergy in well-defined dual-atom active sites is an available avenue to promote multistep tandem catalytic reactions. Herein, we construct a dual-hetero-atom catalyst that comprises adjacent Cu-N₄ and Se-C₃ active sites for efficient oxygen reduction reaction (ORR) activity. Operando X-ray absorption spectroscopy coupled with theoretical calculations provide in-depth insights into this dual-atom synergy mechanism for ORR under realistic device operation conditions. The heteroatom Se modulator can efficiently polarize the charge distribution around symmetrical Cu-N₄ moieties, and serve as synergistic site to facilitate the second oxygen reduction step simultaneously, in which the key OOH*-(Cu₁-N₄) transforms to O*-(Se₁-C₂) intermediate on the dual-atom sites. Therefore, this designed catalyst achieves satisfied alkaline ORR activity with a half-wave potential of 0.905 V vs. RHE and a maximum power density of 206.5 mW cm⁻² in Zn-air battery.