Immobilization of multifunctional silsesquioxane cage on precipitated silica supports

Synthesis of octakis({3-glycidoxypropyl}dimethylsiloxy) octasilsesquioxane (G-POSS) was carried out based on a reaction involving the hydrosilylation of allyl glycidyl ether with octakis(dimethylsiloxy) octasilsesquioxane, using Karstedt’s catalyst and toluene. SiO₂/POSS hybrid systems were obtained via a method of immobilization by evaporation of the solvent, using hydrated or spherical silica obtained by precipitation in an aqueous or emulsion environment. The surface of the SiO₂ was modified using octakis({3-glycidoxypropyl}dimethylsiloxy) octasilsesquioxane (G-POSS). The effectiveness of the modification of the obtained hybrid materials was verified using Fourier transform infrared spectroscopy and nuclear magnetic resonance (²⁹Si and ¹³C CP MAS NMR). The tests showed that the interactions between the silica support and the modifier are of the nature of chemical adsorption. In addition a mechanism was proposed for the interactions between silica and oligosilsesquioxane. To test the final effect, the hybrid systems were subjected to morphological evaluation (transmission electron microscopy). Parameters of porous structure of the products were also determined: the specific surface area, pore diameter and pore volume. Thermal stability was tested for the pure silsesquioxane cage, the initial silica supports and the resulting systems. Elemental analysis was also carried out to determine the effect of surface modification on the degree of coverage with a particular POSS compound.     

Direct and alternating current voltammetry at an HMDE in solutions containing activated charcoal suspension

Advantage is taken of the property that activated charcoal particles dispersed in a solution accumulate on the HMDE. Alternating current voltammetry is used to determine the surface area of carbon sticking to the electrode on which redox processes may proceed. The surface area of charcoal determined in this way allowed us to estimate the contents of electroactive oxygen in three types of carbon samples. It has been found that the capability of carbon particles to stick to the mercury surface increases with growing oxygen content.The electroactive forms of oxygen bonded to the carbon surface undergo reduction in a peak at about −0.5 V. The second reduction peak, at about −1.6 V, is connected with hydrogen evolution on the charcoal-covered part of the electrode. Detachment of the charcoal particles from the mercury surface results in decay of the H₃O⁺ reduction current. Photographs provide evidence of the efficiency of accumulation of the carbon particles in dependence on the type of sample tested and the HMDE potential as well as phenomena accompanying “desorption”.     

Aminated metal-organic framework (NH2-MIL-101(Cr)) incorporated polyvinylidene (PVDF) hybrid membranes: Synthesis and application in efficient removal of Congo red from aqueous solution

The efficient treatment of wastewater containing organic dyes generated in diverse industrial processes has become more crucial owing to increasing environmental concerns. In this paper, we incorporated the aminated functional NH₂-MIL-101(Cr) into the porous polyvinylidene fluoride (PVDF) to fabricate the MOFs/polymer hybrid membranes, which combined the surface activity of MOFs and the membrane's filtration plus the adsorption process, and can be used in the high-efficient removal of congo red (CR) from aqueous solution. Two synthesis strategies were employed, and both of which are useful in fabricating the NH₂-MIL-101(Cr)@PVDF hybrid membranes. The NH₂-MIL-101(Cr) particles are mainly incorporated into the pores of PVDF, and thus enhance the hydrophilicity, water flux as well as porosity of the hybrid membranes. In the adsorption experiments, the influences of various conditions including the solution pH, adsorption time, adsorption isotherms, reusability, and the filtration performances were investigated systematically, and all the hybrid membranes show evidently improved adsorption performances compared to original PVDF films. The adsorption thermal and dynamics analyses indicate that the adsorption process is mainly featured in Langmuir monolayer adsorption and chemical adsorption. The hydrogen bonding at the interface of CR/NH₂-MIL-101(Cr) is responsible for the selective adsorption of CR. The excellent reusability and the dynamic adsorption performances determine the potential applications of MOF-based hybrid membranes in the membrane separation of CR from practical waste water.     

Facile synthesis of magnetic hybrid metal–organic frameworks with high adsorption capacity for methylene blue

A magnetic hybrid material (Fe₃O₄‐COOH/HKUST‐1) was easily synthesized via a two‐step simple solvothermal method. Through adding sodium acrylate directly into the synthesis of Fe₃O₄ spheres, the surface has more carboxyl groups. It is notable that the reactions proceed without use of organic surfactants. The magnetic hybrid material was characterized using various techniques. The magnetic hybrid material has a high specific surface area (430.15 m² g⁻¹) and excellent magnetism (23.65 emu g⁻¹). It is an efficient adsorbent for removing organic dyes like methylene blue (MB) from aqueous solution. It also can be easily recovered from liquid media using an external magnetic field. Adsorption experiment shows the magnetic hybrid material possesses a high adsorption capacity (118.6 mg g⁻¹), and has high adsorption efficiency (94.3%) after five adsorption cycles with ethanol (0.2% HCl) as eluent. The sorption kinetics and isotherm analysis indicate these sorption processes are better fitted to the pseudo‐second‐order and Langmuir equations. Thermodynamic study shows the sorption processes are spontaneous and endothermic.     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维(CNFs)作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼(MoS_2)纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS_2纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS_2/CNFs杂化材料的电催化析氢性能(HER)进行研究,研究表明近似皮芯结构的MoS_2/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110m V·dec~(-1)。     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维（CNFs）作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼（MoS₂）纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS₂纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS₂/CNFs杂化材料的电催化析氢性能（HER）进行研究,研究表明近似皮芯结构的MoS₂/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110 mV·dec^-1。     

Estimation of the intrinsic stresses in α-alumina in relation with its elaboration mode

The specific signatures of α-Al₂O₃ by Fourier transform infrared (FTIR) spectroscopy were investigated to estimate the intrinsic stress in this compound according to its elaboration mode. Thus, α-alumina was prepared either by calcination of boehmite or gibbsite and also generated by oxidation of a metallic FeCrAl alloy. FTIR results were mainly supported by X-ray diffraction (XRD) patterns that allowed to determine the crystallite size and the strain in the various alpha aluminas. Moreover, the infrared peak at 378.7 cm⁻¹ was used as a reference for stress free α-alumina and the shift of this peak allowed to estimate intrinsic stresses, which were related to the morphology and to the specific surface area of aluminas according to their elaboration mode. These interpretations were confirmed by results obtained by cathodoluminescence experiments.     

Electrochemical chlorine sensor with multi-walled carbon nanotubes as electrocatalysts

It has been reported for the first time that an electrochemical gas sensor modified with multi-walled carbon nanotubes (MWNTs) film as electrocatalyst was fabricated for the determination of chlorine (Cl₂).Here, MWNTs and graphite were compared with each other in terms of their electrochemical properties using cyclic voltammetry. Cl₂ gas was allowed through the cathode surface of the sensor and the resulting galvanic effects were monitored. Results indicated that both of the MWNTs and graphite have the electrocatalytic activity for the reduction of Cl₂ while the MWNTs-modified electrode exhibited a higher accessible surface area in electrochemical reactions, excellent sensitivity, stable response, reproducibility and recovery for the determination of Cl₂.     

Evaluation of physicochemical properties of a new group of SiO2/silane/POSS hybrid materials

Preparation of a new group of hybrid fillers, of SiO₂/silane/oligomeric silsesquioxane type, characterised by specific desirable physicochemical properties, was studied. Synthetic SiO₂ was precipitated by the emulsion method. At first, as a result of improved adhesion between SiO₂ and selected POSS compound, SiO₂ surface was functionalised with alkoxysilanes containing characteristics functional groups. Functionalised SiO₂ was used in the process of hybrid filler preparation according to hydrolytic condensation using methacryl POSS® mixture. To evaluate potential application of such fillers, SiO₂ systems, bifunctionalised using innovative method, were thoroughly characterised to determine their physicochemical properties as well as the effectiveness of functionalisation with silanes and POSS compound. Proposed method of SiO₂ surface modification using selected alkoxysilanes and oligosilsesquioxanes is innovative and gives very promising results. Bifunctionalisation of inorganic fillers with those compounds will substantially extended the range of their applications and probably will lead to improvement of mechanical properties of final polymer composites and reduction in the cost of their production which is the main feature of this research. Copyright © 2013 John Wiley & Sons, Ltd.     

Hybrid sol–gel thin films doped with a pH indicator: effect of organic modification on optical pH response and film surface hydrophilicity

Optical sensors for application in innovative wearable sensing systems such as textile-integrated systems and wireless sensor platforms rely on the development of low-cost multifunctional materials compatible with standard fabrication technologies. We are developing optically responsive pH sensitive sol–gel coatings for integration with a mobile wireless smart tag sensing system. For this application, we have fabricated a range of thin pH sensitive films using bromocresol green (BCG) indicator immobilised in inorganic–organic silica hybrid matrices prepared by a sol–gel method and deposited by spin-coating onto glass substrates. The surface hydrophilicity of the films were varied by using the inorganic sol–gel precursor tetraethoxysilane together with either methyltriethoxysilane, ethyltriethoxysilane, phenyltrimethoxysilane or glycidoxypropyltrimethoxysilane as organically modified sol–gel precursors, co-polymerised in different ratios. Spectral characterisation of the films was performed using visible absorption spectroscopy. The shift in absorption maxima and other spectral changes of the different matrices have been identified, and the apparent pK _app values of the immobilised BCG pH indicator determined. The surface wettability properties of the films have been studied by measuring the contact angle of water, formamide and diiodomethane which has allowed the estimation of the surface free energy (SFE) using three different models: Owens–Wendt, Wu and van Oss-Chaudhury-Good. It is shown that the SFE of the hybrid films is directly related to the type and the degree of organic modification, which in turn has a significant effect on the pH response-time of these sensing films.     

Langmuir monolayer properties of the fluorinated-hydrogenated hybrid amphiphiles with dipalmitoylphosphatidylcholine (DPPC)

Surface pressure–area (π–A), surface potential–area (ΔV–A), and dipole moment–area (μ–A) isotherms were obtained for the Langmuir monolayer of two fluorinated-hydrogenated hybrid amphiphiles (sodium phenyl 1-[(4-perfluorohexyl)-phenyl]-1-hexylphosphate (F6PH5PPhNa) and (sodium phenyl 1-[(4-perfluorooctyl)-phenyl]-1-hexylphosphate (F8PH5PPhNa)), DPPC and their two-component systems at the air/water interface. Monolayers spread on 0.02 M Tris buffer solution (pH 7.4) with 0.13 M NaCl at 298.2 K were investigated by the Wilhelmy method, ionizing electrode method and fluorescence microscopy. Moreover, the miscibility of two components was examined by plotting the variation of the molecular area and the surface potential as a function of the molar fraction for the fluorinated-hydrogenated hybrid amphiphiles on the basis of the additivity rule. The miscibility of the monlayers was also examined by construction of two-dimensional phase diagrams. Furthermore, assuming the regular surface mixture, the Joos equation for analysis of the collapse pressure of two-component monolayers allowed calculation of the interaction parameter (ξ) and the interaction energy (−Δ) between the fluorinated-hydrogenated hybrid amphiphiles and DPPC. The observations by a fluorescence microscopy also supported our interpretation as for the miscibility in the monolayer state. Comparing the monolayer behavior between the two binary systems, no remarkable difference was found among various aspects. Among the two combinations, the mole fraction dependence in monlayer properties was commonly classified into two ranges: 0 ≤ X ≤ 0.3 and 0.3 < X ≤ 1. Dependence of the chain length of fluorinated part was reflected for the molecular packing and surface potential.     

Incorporation of Pure Fullerene into Organoclays: Towards C60‐Pillared Clay Structures

In this work, we demonstrate the successful incorporation of pure fullerene from solution into two‐dimensional layered aluminosilicate minerals. Pure fullerenes are insoluble in water and neutral in terms of charge, hence they cannot be introduced into the clay galleries by ion exchange or intercalation from water solution. To overcome this bottleneck, we organically modified the clay with quaternary amines by using well‐established reactions in clay science in order to expand the interlayer space and render the galleries organophilic. During the reaction with the fullerene solution, the organic solvent could enter into the clay galleries, thus transferring along the fullerene molecules. Furthermore, we demonstrate that the surfactant molecules, can be selectively removed by either simple ion‐exchange reaction (e.g., interaction with Al(NO₃)₃ solution to replace the surfactant molecules with Al³⁺ ions) or thermal treatment (heating at 350 °C) to obtain novel fullerene‐pillared clay structures exhibiting enhanced surface area. The synthesized hybrid materials were characterized in detail by a combination of experimental techniques including powder X‐ray diffraction, transmission electron microscopy, X‐ray photoemission, and UV/Vis spectroscopy as well as thermal analysis and nitrogen adsorption–desorption measurements. The reported fullerene‐pillared clay structures constitute a new hybrid system with very promising potential for the use in areas such as gas storage and/or gas separation due to their high surface area.     

Oxidative bromination reaction using Cu-perfluorophthalocyanine-immobilized silica gel catalyst under mild reaction conditions

A simplified, facile route has been applied for the grafting of copper(II) perfluorophthalocyanine complex onto functionalized silica gel. The resulting organic-inorganic hybrid material is used as an efficient and recyclable catalyst for the regioselective oxidative bromination of various aromatic substrates using KBr/H₂O₂ as the reagents, affording high yields under mild conditions. High catalytic activity efficiency could be attributed to the heterogenization of soluble metal complexes on the high surface area host.     

The Role of Multiwall Carbon Nanotubes in Cu‐BTC Metal‐Organic Frameworks for CO2 Adsorption

The discovery of natural gas fields with a high content of CO₂ in world gas reservoirs poses new challenges for CO₂ capture. This work investigates the use of the metal‐organic framework (MOF) Cu‐BTC and hybrid MWCNTs@Cu‐BTC for CO₂ adsorption. Cu‐BTC and hybrid MWCNTs@Cu‐BTC were synthesized by the solvothermal method. The results of imaging of intact MOF pores in Cu‐BTC and hybrid MWCNTs@Cu‐BTC nanocrystals by high‐resolution transmission electron microscopy (HRTEM) under liquid nitrogen conditions are presented. Physical characterizations of the solid adsorbents were made by using a selection of different techniques, including field‐emission scanning electron microscopy (FESEM), X‐ray powder diffraction (XRD), Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), Brunauer–Emmet–Teller (BET) surface area, and CO₂ adsorption and physisorption measurements. HRTEM and FESEM confirmed that Cu‐BTC has an octahedral shape and that the surface morphology of Cu‐BTC changes by the intercalation of MWCTNs. The results show that the modified Cu‐BTC improved the CO₂ adsorption compared to pure Cu‐BTC. The increase in the CO₂ uptake capabilities of hybrid MWCNTs@Cu‐BTC was ascribed to the intercalation of MWCNTs with Cu‐BTC crystals. The CO₂ sorption capacities of Cu‐BTC and hybrid MWCNTs@Cu‐BTC were found to increase from 1.91701 to 3.25642 mmol/g at ambient conditions.     

Studies of electrochemical behaviour of RuO2-PVC film electrodes: dependence on oxide preparation temperature

Ruthenium dioxide electrodes, prepared on a Pt substrate using coatings of PVC-RuO₂ mixed in THF (designated as RuO₂-PVC film electrode) have been studied for their redox behaviour in 1 M NaOH using variable scan cyclic voltammetry. The various redox transitions in the oxidation state of the central metal ion are characterized using electrochemical parameters such as peak potential, peak current, and surface charge. The effect of oxide preparation temperature, in the range 300–700 °C, on the redox characteristics has also been studied and correlated with the electrochemically active surface area (as measured using small amplitude cyclic voltammetry) and the true surface area (by the BET method). Received: 12 August 1997 / Accepted: 18 October 1999     

Complementary use of Fourier transform laser microprobe mass spectrometry and time-of-flight static secondary ion mass spectrometry for the study of the surface adsorption of organic dyes on silicate materials

The adsorption of organic ionic dyes on different pore size engineered silica materials with potential application for industrial wastewater treatment has been investigated using Fourier transform laser microprobe mass spectrometry (FT-LMMS) and time-of-flight secondary ion mass spectrometry (TOF-S-SIMS). The complementary use of the two methods with different information depth allowed data on the subsurface distribution and pore penetration of the adsorbed organic compounds. Macroscopic methods were employed to determine the amount adsorbed on the particles and the specific external surface area. Local MS analysis allows identification of the organic dyes exclusively at the outer particle surface when the pore size is inferior to the size of the adsorbing molecule, or at the surface of the channels inside the material. Specifically, the monolayer information depth of TOF-S-SIMS causes a signal to refer essentially to the adsorbate at the outer particle surface, which is only a fraction of the total adsorption in mesoporous materials, while FT-LMMS allowed detection of the presence of adsorbates at the outer surface as well as inside the subsurface of 10 to 50 nm depending on the material under study. The observed data open perspectives for the molecular monitoring of the adsorption behaviour of different materials at the (sub) microm scale.     

MoS2/Ag nanohybrid: A novel matrix with synergistic effect for small molecule drugs analysis by negative-ion matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

This paper reports a facile synthesis of molybdenum disulfide nanosheets/silver nanoparticles (MoS₂/Ag) hybrid and its use as an effective matrix in negative ion matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The nanohybrid exerts a strong synergistic effect, leading to high performance detection of small molecule analytes including amino acids, peptides, fatty acids and drugs. The enhancement of laser desorption/ionization (LDI) efficiency is largely attributed to the high surface roughness and large surface area for analyte adsorption, better dispersibility, increased thermal conductivity and enhanced UV energy absorption as compared to pure MoS₂. Moreover, both Ag nanoparticles and the edge of the MoS₂ layers function as deprotonation sites for proton capture, facilitating the charging process in negative ion mode and promoting formation of negative ions. As a result, the MoS₂/Ag nanohybrid proves to be a highly attractive matrix in MALDI-TOF MS, with desired features such as high desorption/ionization efficiency, low fragmentation interference, high salt tolerance, and no sweet-spots for mass signal. These characteristic properties allowed for simultaneous analysis of eight different drugs and quantification of acetylsalicylic acid in the spiked human serum. This work demonstrates for the first time the fabrication and application of a novel MoS₂/Ag hybrid, and provides a new platform for use in the rapid and high throughput analysis of small molecules by mass spectrometry.     

CuII@PAA/PVC mesoporous fibers: A hybrid wedding as a high-performance versatile heterogeneous catalyst for A3, KA2, and decarboxylative A3 reactions

Efforts made on the development of a novel, simple, cost-effective, and efficient approach to fabricate a copper catalyst immobilized on mesoporous poly (acrylic acid)/poly (vinyl chloride) hybrid fibers (Cu^II@PAA/PVC) for versatile catalytic applications in A₃, KA₂, and decarboxylative A₃ couplings has been described in this present work. The characterization of the mesoporous hybrid fibers was well performed by BET, FTIR, SEM, EDX, XPS, and TGA techniques. The pore structure and surface area were calculated by using BET measurement analysis. The obtained mesoporous Cu^II@PAA/PVC fibers exert high catalytic performance in the synthesis of propargylamines via one-pot A₃, KA₂, and decarboxylative A₃ reactions over a series of substrates without employing expensive ligands or inert atmosphere. The active Cu²⁺ species chelating with carboxylate groups in PAA/PVC hybrid fibers plays a key role in the catalysis. Meanwhile, the unique mesoporous structure and fiber morphology facilitate a better mass transfer and enlarge its contact area with substrates in the course of a reaction. Moreover, the Cu²⁺–carboxylate chelation could suppress the leaching of active Cu²⁺ species from the catalyst and thus lead to the catalyst has excellent performance and good durability as well as reusability.     

Model-free kinetics applied for the removal of CTMA<Superscript>+</Superscript> and TPA<Superscript>+</Superscript> of the nanostructured hybrid AlMCM-41/ZSM-5 material

The nanostructured hybrid AlMCM-41/ZSM-5 composite was synthesized starting from a hydrogel with molar composition SiO₂:0.32Na₂O:0.03Al₂O₃:0.20TPABr:0.16CTMABr:55H₂O. The cetyltrimethylammonium bromide (CTMABr) and tetrapropylammonium bromide (TPABr) were used as templates. The above mentioned material presents morphological properties with specific characteristics, such as the surface area of the composite which is approximately half of the surface area of the conventional MCM-41. Another interesting feature is the formation of walls with the double of the density of the MCM-41 structure, which characterizes the hybrid material, resulting in a high stability material for catalytic application. The aim of this study is obtain optimized structures of the hybrid material and for this purpose variations in the synthesis time were carried out. A comparative analysis was performed including X-ray diffraction, Fourier transform infrared spectroscopy, and Thermogravimetry measurements. The model-free kinetic algorithms were applied in order to determinate conversion and apparent activation energy of the decomposition of the CTMA⁺ and TPA⁺ species from the hybrid AlMCM-41/ZSM-5.     

Thermal and morphological investigation of the effect of POSS-(PEG2000)8 addition to UV curable PEGMEA/PEGDA formulation and simultaneously in situ formed silver nanoparticles

In this study, hybrid nanocomposites were synthesized by photo-crosslinking of poly (ethylene glycol) methyl ether acrylate/poly (ethylene glycol) diacrylate monomer system using 2- (carboxymethoxy) thioxanthone and POSS-(PEG₂₀₀₀)₈. Additionally, AgNO₃ was added to this formulation and in situ formation of silver nanoparticles onto hybrid nanocomposites were achieved in one-step. UV–Vis spectroscopy technique was used as a very useful tool for surface plasmon resonance band detection of silver nanoparticles. In addition to thermogravimetric analyses which were performed in nitrogen atmosphere to determine the thermal stability of the nanocomposites, dynamic light scattering, and scanning electron microscopy techniques were also used for size and morphology of silver nanoparticles in a hybrid network. TGA analyses proved that even the addition of a very low amount of POSS-(PEG₂₀₀₀)₈ made noteworthy contribution to thermal stability especially in the presence of silver nanoparticles in the hybrid network. The swelling capacities of the prepared films were examined at 1, 3 and 24 h in phosphate buffer solution (pH = 7.4). It was found that film containing only POSS-(PEG₂₀₀₀)₈ had the highest swelling ratio in the shortest time.