Topotactic Synthesis of Phosphabenzene‐Functionalized Porous Organic Polymers: Efficient Ligands in CO2 Conversion

Progress toward the preparation of porous organic polymers (POPs) with task‐specific functionalities has been exceedingly slow—especially where polymers containing low‐oxidation phosphorus in the structure are concerned. A two‐step topotactic pathway for the preparation of phosphabenzene‐based POPs (Phos‐POPs) under metal‐free conditions is reported, without the use of unstable phosphorus‐based monomers. The synthetic route allows additional functionalities to be introduced into the porous polymer framework with ease. As an example, partially fluorinated Phos‐POPs (F‐Phos‐POPs) were obtained with a surface area of up to 591 m² g^?1. After coordination with Ru species, a Ru/F‐Phos‐POPs catalyst exhibited high catalytic efficiency in the formylation of amines (turnover frequency up to 204 h^?1) using a CO₂/H₂ mixture, in comparison with the non‐fluorinated analogue (43 h^?1) and a Au/TiO₂ heterogeneous catalysts reported previously (<44 h^?1). This work describes a practical method for synthesis of porous organic phosphorus‐based polymers with applications in transition‐metal‐based heterogeneous catalysis.     

共价有机骨架材料设计及其在分离领域的应用

共价有机骨架(COFs)材料是由有机小分子单体通过共价键连接形成的结晶多孔聚合物。与传统的线性聚合物不同的是,COFs可以在二维和三维空间上对其骨架结构进行控制,从而合成具有高度有序的刚性多孔结构,并且能够调节骨架的化学和物理性质。这种由COF形成的纳米级孔道和空间为分子存储、释放和分离提供了理想的环境。因此它在能量储存、分离、催化等领域有着广泛的应用前景。本文综述了近年来COFs材料的研究进展,主要包括材料的合成策略及其在分离领域的应用,并对COFs材料未来的发展方向进行了展望。     

Diaryl Dihydrophenazine-Based Porous Organic Polymers Enhance Synergistic Catalysis in Visible-Light-Driven Organic Transformations

Porous organic polymers (POPs) have emerged as a novel class of porous materials that are synthesized by the polymerization of various organic monomers with different geometries and topologies. The molecular tunability of organic building blocks allows the incorporation of functional units for photocatalytic organic transformations. Here, we report the synthesis of two POP-based photocatalysts via homopolymerization of vinyl-functionalized diaryl dihydrophenazine (DADHP) monomer ( POP1 ) and copolymerization of vinyl-functionalized DADHP and 2,2′-bipyridine monomers ( POP2 ). The fluorescence lifetimes of DADHP units in the POPs significantly increased, resulting in enhanced photocatalytic performances over homogeneous controls. POP1 is highly effective in catalysing visible-light-driven C−N bond forming cross-coupling reactions. Upon coordination with Ni²⁺ ions, POP2-Ni shows strong synergy between photocatalytic and Ni catalytic cycles due to the confinement effect within the POP framework, leading to high efficiency in energy, electron, and organic radical transfer. POP2-Ni displays excellent activity in catalysing C−P bond forming reactions between diarylphosphine oxides and aryl iodides. They increased the photocatalytic activities by more than 30-fold in C−N and C−P cross-coupling reactions. These POP catalysts were readily recovered via centrifugal separation and reused in six catalytic cycles without loss of activities. Thus, photosensitizer-based POPs provide a promising platform for heterogeneous photocatalytic organic transformations.     

石墨炔孔结构:设计、合成和应用

石墨炔作为一种新兴碳材料, 由于具有特殊的电子特性、 丰富的纳米级孔隙以及能在相对低温下合成的特点, 在催化、 能源及生物等领域受到广泛关注. 石墨炔自下而上的合成特点使其在结构上具有可设计性, 而其显著特征在于具有拓扑有序的规则孔道结构. 在过去的10年间, 研究人员在石墨炔孔结构设计方面进行了大量的实验和理论研究. 孔结构设计所带来的独特性能为其提供了良好的应用前景. 本文从石墨炔的合成特点出发, 总结了单体、 催化剂、 模板及溶液4个因素对石墨炔结构的影响, 并从孔结构出发讨论了其应用. 为研究者以应用为导向, 设计合成具有特殊孔结构的石墨炔提供了思路. 最后还探讨了孔结构设计给石墨炔带来的机遇与挑战, 并对三维多孔结构石墨炔的设计进行了展望.     

基于间苯三酚及其衍生物构筑新型有机多孔材料

有机多孔材料凭借其高比表面积、孔道可调性、易功能化修饰和结构多样性等特征,在催化、能源、吸附与分离等多个领域中展现了巨大应用潜力.对多官能度有机化合物单体以及高效聚合反应的巧妙应用,为新型有机多孔材料的创制提供了强有力的工具,成为该领域的研究热点.以C₃对称型的间苯三酚及其衍生物为例,综述了其在一系列新型有机多孔材料高效构筑中的最新研究进展.     

Design and Catalytic Application of Functional Porous Organic Polymers: Opportunities and Challenges

This review article encompasses the progress and conventional overview of current research activities of porous organic polymers (POPs), especially in catalysis, as they have garnered colossal interest in the scientific fraternity due to their intriguing characteristic features. Various synthetic strategies with possible modification of functionality of POPs have been used to improve the catalytic efficiency towards value‐added chemicals production. Accordingly, this review article is mainly focused on the design, development of various functionalized POPs by employing Friedel‐Crafts alkylation, FeCl₃ assisted oxidative polymerisation and polymerisation in nonaqueous medium, and a comprehensive understanding in potential catalytic applications namely, acetalization, hydrodeoxygenation (HDO), hydrogenation, coupling, photocatalytic hydrogen evolution and biomass conversion towards the production of value‐added chemicals in biodiesel and chemical industries.     

机械化学法制备金属-有机骨架及其复合物研究进展

金属-有机骨架(MOFs)是由金属离子/簇和多齿状有机配体通过配位键桥联而形成的多孔晶态材料。MOFs材料具有孔隙率高、比表面积大、尺寸可调、结构易修饰、功能多样化等特点,使其在气体吸附、分离和催化等方面都具有潜在应用价值。到目前为止,在MOFs合成的几种常见方法中,机械化学法(即在无溶剂或极少量溶剂的情况下研磨固体反应物进行的反应)作为一种清洁、绿色、高效的合成手段逐渐引起人们的关注。本综述总结了近年来机械化学合成MOFs及其复合物的典型进展,目的是为机械化学法合成MOFs及其复合材料提供一个通用而易于理解的概述。目前的研究进展表明,机械化学法是一种实用且环境友好的合成方法,为低成本、宏量生产MOFs及其复合物提供了可能。     

Novel porous anatase TiO2 nanorods and their high lithium electroactivity

We demonstrated a simple approach for the synthesis of a kind of novel porous anatase TiO₂ nanorods. The method is based on a reaction in composite-hydroxide eutectic system and normal atmosphere without using an organic dispersant or capping agent. The synthesis technique is cost effective, easy to control and is adaptable to mass production. This is the first time TiO₂ nanorods with a porous structure are fabricated by using this method. The as-prepared material was characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), nitrogen adsorption and desorption experiments and electrochemical measurements. The results showed that the anatase TiO₂ nanorods obtained in our experiment have a large specific surface area with a porous structure which makes it have a potential application in catalysts and battery materials, especially in lithium ion batteries. In this study, we mainly tested their electrochemical performance as negative materials for lithium ion batteries. Further research to optimize synthesis conditions, particularly to develop their application in the field of catalysis is currently in progress.     

Azo-bridged hydroxyl-rich porous pillar[5]arene polymers for efficient carbon dioxide conversion

Two new azo-bridged hydroxyl-rich porous organic polymers (POPs), named PPDA-P5 and TB-P5, were designed and successfully fabricated via azo-coupling reaction with per-hydroxylated pillar[5]arene macrocycle as the core and p-phenylenediamine and Troger's base (TB) diamine as the linker, respectively. Owing to the abundant nitrogen and hydroxyl groups, both polymers exhibited excellent interaction affinity toward carbon dioxide (CO₂) and then were applied as efficient heterogeneous catalysts for the transformation of CO₂ to cyclic carbonates with high yield, even under mild conditions. Interestingly, TB-P5 exhibited superior catalytic performance toward PPDA-P5, indicating TB's positive role as an organic base. This design strategy and results provided new insight into the development of macrocycle-based POPs in the field of heterogeneous catalysis.     

亚胺类共价有机骨架材料在样品前处理中的应用

亚胺类共价有机骨架(I-COFs)是有机单体根据席夫碱(Schiff-base)反应原理缩合形成的一类新型多孔晶体有机材料.I-COFs具有骨架密度低、比表面积大、孔隙率高、单体种类丰富、孔径尺寸可控、结构可功能化、合成方法多样和物化稳定性好等优点.近年来,I-COFs已成为材料科学领域的研究前沿,并广泛用于气体吸附、...     

共价有机框架材料研究进展

共价有机框架材料是一类具有周期性和结晶性的有机多孔聚合物。共价有机框架材料由轻质元素通过共价键连接,拥有较低的密度、高的热稳定性以及固有的多孔性,在气体吸附、非均相催化、能量存储等研究领域有着广泛的应用潜力,引起了科学界强烈的研究兴趣。本文主要综述了近年来共价有机框架材料的最新研究进展,包括其结构设计、合成、纯化、表征以及在气体吸附,催化及光电等方面的应用,并对共价有机框架材料未来的发展趋势进行了展望。     

Light Hydrocarbon Separations Using Porous Organic Framework Materials

Light hydrocarbons (C₁–C₃) are used as basic energy feedstocks and as commodity organic compounds for the production of many industrially necessary chemicals. Due to the nature of the raw materials and production processes, light hydrocarbons are generated as mixtures, but the high-purity single-component products are of vital importance to the petrochemical industry. Consequently, the separation of these C₁–C₃ products is a crucial industrial procedure that comprises a significant share of the total global energy consumption per year. As a complement to traditional separation methods (distillation, partial hydrogenation, etc.), adsorptive separations using porous solids have received widespread attention due to their lower energy costs and higher efficiency. Extensive research has been devoted to the use of porous materials such as zeolites and metal-organic frameworks (MOFs) as solid adsorbents for these key separations, owing to the high porosity, tunable pore structures, and unsaturated metal sites present in these materials. Recently, porous organic framework (POF) materials composed of organic building blocks linked by covalent bonds have also shown excellent properties in light hydrocarbon adsorption and separation, sparking interest in the use of these materials as adsorbents in separation processes. This Minireview summarizes the recent advances in the use of POFs for light hydrocarbon separations, including the separation of mixtures of methane/ethane, methane/propane, ethylene/ethane, acetylene/ethylene, and propylene/propane, while highlighting the relationships between the structural features of these materials and their separation performances. Finally, the difficulties, challenges, and opportunities associated with leveraging POFs for light hydrocarbon separations are discussed to conclude the review.     

ZIF-derived mesoporous carbon materials prepared by activation via Na2SiO3 for supercapacitor

Metal organic frameworks (MOFs) derived carbonaceous materials have a wide range of applications in the fields of energy storage, catalysis, adsorption and separation, etc. Especially, zeolitic imidazolate framework-8 (ZIF-8) is an excellent candidate to synthesize porous carbon due to the large surface area and high nitrogen content. However, the dominated microporous structure of ZIF-8-derived carbon significantly hinders ionic mass transfer, limiting the improvement of performance. Herein, MOF-derived mesoporous carbon was prepared using ZIF-8 as carbon precursor and cheap sodium silicate (Na₂SiO₃) as activator. The introduction of Na₂SiO₃ created rich mesoporous structure and increased specific surface area, as well as the effects of pyrolysis temperature and Na₂SiO₃ dosage on performance was also investigated. The obtained ZIF-derived porous carbon exhibits good electrochemical performance with specific capacitance of 263 F/g at 1 A/g and excellent cycle life (96.07% after 10,000 GCD cycles) in supercapacitor. The use of cheap Na₂SiO₃ activator provides a new orientation for the preparation of MOF-derived carbons with rich pores, high surface area, and facilitates the large-scale application of MOF-derived carbons.     

Confinement synthesis in porous molecule-based materials: a new opportunity for ultrafine nanostructures

A balance between activity and stability is greatly challenging in designing efficient metal nanoparticles (MNPs) for heterogeneous catalysis. Generally, reducing the size of MNPs to the atomic scale can provide high atom utilization, abundant active sites, and special electronic/band structures, for vastly enhancing their catalytic activity. Nevertheless, due to the dramatically increased surface free energy, such ultrafine nanostructures often suffer from severe aggregation and/or structural degradation during synthesis and catalysis, greatly weakening their reactivities, selectivities and stabilities. Porous molecule-based materials (PMMs), mainly including metal–organic frameworks (MOFs), covalent organic frameworks (COFs) and porous organic polymers (POPs) or cages (POCs), exhibit high specific surface areas, high porosity, and tunable molecular confined space, being promising carriers or precursors to construct ultrafine nanostructures. The confinement effects of their nano/sub-nanopores or specific binding sites can not only effectively limit the agglomeration and growth of MNPs during reduction or pyrolysis processes, but also stabilize the resultant ultrafine nanostructures and modulate their electronic structures and stereochemistry in catalysis. In this review, we highlight the latest advancements in the confinement synthesis in PMMs for constructing atomic-scale nanostructures, such as ultrafine MNPs, nanoclusters, and single atoms. Firstly, we illustrated the typical confinement methods for synthesis. Secondly, we discussed different confinement strategies, including PMM-confinement strategy and PMM-confinement pyrolysis strategy, for synthesizing ultrafine nanostructures. Finally, we put forward the challenges and new opportunities for further applications of confinement synthesis in PMMs.

The space-, coordination-, and/or ion-confinement in porous molecule-based materials (PMMs) endow the PMM-confinement (pyrolysis) synthesis to construct a variety of ultrafine nanostructures.     

Postsynthetic amine modification of porous organic polymers for CO2 capture and separation

Porous organic polymers (POPs) constitute an important class of sorbents studied in various adsorption and separation processes. Their unique properties, including high surface areas, adjustable pore sizes, and surface chemistries make them ideal candidates for CO₂ capture. To achieve a high CO₂ adsorption capacity and selectivity, particularly at the low partition pressures required for post-combustion CO₂ capture or direct capture of CO₂ from the atmosphere, incorporating amines onto the polymer frameworks or within the pores has shown much promise. This review provides a comprehensive summary of recent studies on the synthesis and CO₂ capture performance of amine-functionalized POPs. The review also provides a detailed discussion of structure-performance relationships, focusing on how the loading amount and amine type influence CO₂ capture capacity, CO₂/N₂ selectivity, heat of adsorption, sorption kinetics, and recyclability of POPs. Additionally, the authors offer their perspective on the challenges associated with the practical implementation of amine-modified POPs for CO₂ capture.     

Applications of covalent organic frameworks (COFs):From gas storage and separation to drug delivery

Covalent organic frameworks (COFs) are an emerging class of porous covalent organic structures whose backbones were composed of light elements (B, C, N, O, Si) and linked by robust covalent bonds to endow such material with desirable properties, i.e., inherent porosity, well-defined pore aperture, ordered channel structure, large surface area, high stability, and multi-dimension. As expected, the above-mentioned properties of COFs broaden the applications of this class of materials in various fields such as gas storage and separation, catalysis, optoelectronics, sensing, small molecules adsorption, and drug delivery. In this review, we outlined the synthesis of COFs and highlighted their applications ranging from the initial gas storage and separation to drug delivery.     

Influence of the seed polymer on the chromatographic properties of size monodisperse polymeric separation media prepared by a multi-step swelling and polymerization method

Monodisperse polymer particle-based separation media were prepared by a multi-step swelling and polymerization method with two pairs of monomers and two porogenic solvents. Their chromatographic properties were compared to those of beads prepared by a corresponding suspension polymerization method without the use of seed polymer to ascertain the influence of the seed polymer on their porous structures. A large change in porous structure was observed when the swollen particle consisting of monomers and porogenic solvents contained at least one good solvent for the polystyrene seed polymer, allowing it to remain in the polymerizing medium. In contrast, when the polystyrene seed particle was excluded from the swollen oil droplets, due to its poor solubility in the monomers and the porogenic solvents, there was no difference in the chromatographic properties such as pore volume, pore size, pore size distribution, or retention selectivity between the multi-step swelling and polymerization method and the suspension polymerization method. Since the only difference between the multi-step swelling and polymerization method and the suspension method is the use of the seed polymer, it appears that a very small amount (< 1% v/v) of seed polymers in the enlarged swollen droplets plays an important role as a porogen and affects the porous structure as well as the chromatographic properties of the monodisperse polymer particle-based separation media. © 1993 John Wiley & Sons, Inc.     

Metal-organic framework membranes: From synthesis to electrocatalytic applications

Metal-organic frameworks (MOFs), as an emerging family of porous inorganic-organic crystal materials, exhibit widely applications in gas storage and separation, drug release, sensing, and catalysis, owing to easily adjustable pore sizes, uniformly distributed metal centers, high surface areas, and tunable functionalities. However, MOF crystal powders are usually difficult to be directly applied into specific devices because of their brittleness, insolubility and low compatibility. Therefore, to expand versatile MOF membranes with robustness and operational flexibility is urgent to satisfy practical applications. Although numerous reports have reviewed the synthesis and applications of MOF membranes, relatively few reports the electrocatalytic properties based on MOF membranes. Herein, this mini-review provides an overview of preparation of MOF membranes, including directed synthesis, secondary growth and electrochemical deposition method. Meanwhile, fabrication of ultrathin 2D MOF nanosheets those can be also defined as a kind of nanoscale MOF membranes is also mentioned. Electrocatalytic performance of oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER) and CO₂ reduction reaction (CO₂RR) for diverse MOF membranes/nanosheets and their derivatives are introduced.     

Porous Polyelectrolytes: The Interplay of Charge and Pores for New Functionalities

The past decade has witnessed rapid advances in porous polyelectrolytes and there is tremendous interest in their synthesis as well as their applications in environmental, energy, biomedicine, and catalysis technologies. Research on porous polyelectrolytes is motivated by the flexible choice of functional organic groups and processing technologies as well as the synergy of the charge and pores spanning length scales from individual polyelectrolyte backbones to their nano‐/micro‐superstructures. This Review surveys recent progress in porous polyelectrolytes including membranes, particles, scaffolds, and high surface area powders/resins as well as their derivatives. The focus is the interplay between surface chemistry, Columbic interaction, and pore confinement that defines new chemistry and physics in such materials for applications in energy conversion, molecular separation, water purification, sensing/actuation, catalysis, tissue engineering, and nanomedicine.     

手性多孔材料在色谱分离分析中的应用

手性多孔有机骨架材料(Chiral porous organic frameworks,CPOFs)具有孔性质优异、比表面积高、稳定性好以及易功能化等诸多优点,已经在手性催化、识别和分离等领域中得到应用。手性多孔有机骨架材料主要有手性金属-有机骨架材料(Chiral metal-organic frameworks,CMOFs)和手性共价有机骨架材料(Chiral covalent organic frameworks,CCOFs)及其他材料,这类材料具有特殊的手性识别、吸附作用,在色谱分离分析领域中已成为研究热点之一。该文综述了手性多孔材料的合成及其在色谱分离和选择性吸附中的应用,展望了未来CPOFs材料可能的应用与发展方向。