A Novel Derivatization Method Coupled with GC–MS for the Simultaneous Determination of Chloropropanols

A sensitive and rapid derivatization method for the simultaneous determination of chloropropanols [1,3-dichloropropan-2-ol (1,3-DCP), 2,3-dichloropropan-1-ol (2,3-DCP) and 3-chloropropane-1,2-diol (3-MCPD)] has been developed. The three chloropropanols were silylated with 1-trimethylsilylimidazole and then determined by GC–MS. n-Undecane was used as the internal standard. The limits of detection (LOD) were 0.20, 0.10, 0.14 μg kg^?1 for 1,3-DCP, 2,3-DCP and 3-MCPD, respectively. The three compounds behaved >0.999 of linearity and satisfactory precision with the relative standard deviation (RSD) <10%. The excellent validation data suggested that this method was more effective than heptafluorobutyrylimidazole derivatization, and 1-trimethylsilylimidazole was considered as a promising silylating reagent to be widely applied to measurements of chloropropanols in real samples.     

Development and Validation of a Liquid Chromatographic Method Useful for the Determination of Amino Acids in New and Commercial Alimentary Supplements

In this study, a new liquid chromatographic method with pre-column derivatization was developed and validated for the simultaneous quantification of acetylcarnitine taurinate, asparagine, potassium aspartate, asparagine and carnosine in new and commercial alimentary supplements. The effect of complex matrices was evaluated by the study of the amino acid derivatization reaction with 2,5-dimethyl-1H-pyrrole-3,4-dicarbaldehyde in placebo solutions (DPD). Experimental parameters affecting the derivatization and chromatographic separation were investigated. The reaction was carried out at room temperature for 10 min. The adducts were separated on a Synergi Hydro-RP 80 Å column using a mobile phase consisting of 11 mM aqueous tetrapropylammonium bromide (pH 3.5)/methanol by gradient elution conditions at a flow rate of 0.8 mL/min. UV absorbance detection was set at λ = 320 nm. The validation parameters such as linearity, sensitivity, accuracy, precision, specificity and ruggedness were highly satisfactory. Linear responses were obtained by placebo solutions (determination coefficient ≤ 0.9994). Intra-day precision (RSD) was ≤1.06 % for corrected peak area and ≤1.14 % for retention times (t _R) without significant differences between intra- and inter-day data. Recovery studies showed good results for all the examined compounds (from 97.72 to 101.5 %) with RSD ≤1.30 %.

     

Development and Validation of a Liquid Chromatographic Method Useful for the Determination of Amino Acids in New and Commercial Alimentary Supplements

In this study, a new liquid chromatographic method with pre-column derivatization was developed and validated for the simultaneous quantification of acetylcarnitine taurinate, asparagine, potassium aspartate, asparagine and carnosine in new and commercial alimentary supplements. The effect of complex matrices was evaluated by the study of the amino acid derivatization reaction with 2,5-dimethyl-1H-pyrrole-3,4-dicarbaldehyde in placebo solutions (DPD). Experimental parameters affecting the derivatization and chromatographic separation were investigated. The reaction was carried out at room temperature for 10 min. The adducts were separated on a Synergi Hydro-RP 80 Å column using a mobile phase consisting of 11 mM aqueous tetrapropylammonium bromide (pH 3.5)/methanol by gradient elution conditions at a flow rate of 0.8 mL/min. UV absorbance detection was set at λ = 320 nm. The validation parameters such as linearity, sensitivity, accuracy, precision, specificity and ruggedness were highly satisfactory. Linear responses were obtained by placebo solutions (determination coefficient ≤ 0.9994). Intra-day precision (RSD) was ≤1.06 % for corrected peak area and ≤1.14 % for retention times (t _R) without significant differences between intra- and inter-day data. Recovery studies showed good results for all the examined compounds (from 97.72 to 101.5 %) with RSD ≤1.30 %.     

Simultaneous quantification of fatty acids in serum with dual derivatization by liquid chromatography-tandem mass spectrometry

Fatty acids have multitudinous biological functions and play a crucial role in many biological processes, but due to poor ionization efficiency and lack of appropriate internal standards, the comprehensive quantification of fatty acids by liquid chromatography-tandem mass spectrometry is still challenging. In this study, a new, accurate, and reliable method for quantifying 30 fatty acids in serum using dual derivatization was proposed. Indole-3-acetic acid hydrazide derivants of fatty acids were used as the internal standard and indole-3-carboxylic acid hydrazide derivants of them were used to quantify. The derivatization conditions were systematically optimized and the method validation results showed good linearity with R² > 0.9942, low detection limit (0.03–0.6 nM), precision (1.6%–9.8% for intra-day and 4.6%–14.1% for inter-day), recovery (88.2%–107.2% with relative standard deviation < 10.5%), matrix effect (88.3%–105.2% with the relative standard deviation < 9.9%) and stability (3.4%–13.8% for fatty acids derivants in 24 h at 4°C and 4.2%–13.8% for three freeze-thaw cycles). Finally, this method was successfully applied to quantify fatty acids in serum samples of Alzheimer's patients. In contrast to the healthy control group, nine fatty acids showed a significant increase in the Alzheimer's disease group.     

Simultaneous determination of five triterpenic acids in four Corydalis herb medicines by reversed-phase high performance liquid chromatography–fluorescence-mass spectrometer (RP-HPLC–FLD-MS) based on pre-column derivatization

A rapid and sensitive reversed-phase high performance liquid chromatography– fluorescence-mass spectrometer (RP-HPLC–FLD-MS) method based on pre-column derivatization using 2-(5-benzoacridine)ethyl-p-toluenesulfonate (BAETS) as labelling reagent has been developed for simultaneous determination of five triterpenic acids (asiatic acid (AA), maslinic acid (MA), corosolic acid (CA), oleanolic acid (OA), and betulinic acid (BA). The presented method was validated for linearity (correlation coefficient R² > 0.9994), precision (RSD 2.1%–3.9%) and reproducibility (RSD 0.01%–2.1%). The limits of detection (LODs) and the limits of quantitation LOQs were within the range of 0.71–1.02 ng mL^?1 and 2.28–3.24 ng mL^?1, respectively. The proposed method was successfully applied to simultaneously determine five triterpenic acids of four Corydalis plants and showed satisfactory reproducibility and credibility. Moreover, several main parameters affecting extraction procedure and derivatization efficiency were investigated by response surface methodology (RSM), respectively. Triterpenic acid content in four Corydalis plants was measured according to the established method and the results indicated that triterpenic acid contents were various in different organs and herbs.     

Systematic development and validation of RP-HPLC method for simultaneous estimation of tamoxifen and sulphoraphane with specific application for nanolipidic formulations

Tamoxifen (TAM) and Sulphoraphane (SFN) are well-known anti-estrogen drugs used for the treatment of breast cancer. Due to their synergistic therapeutic potential, their combination is preferred as it helps to minimize the drug-related toxicities and enhances therapeutic efficacy. A simple, robust and fast simultaneous reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed as well validated for the analysis of both the drugs based on their particular wavelength. The separation was performed on C₁₈ analytical column with dimensions of 4.6 × 250 mm, 5 μm using mobile phase methanol: water (pH 3.5) in the ratio 70:30 and flow rate of 0.8 min/mL. Box-Behnken experimental design was used to optimized these independent variables and analyze their effect on the response variables like retention time (RT), no. of theoretical plates and tailing factor of both analytes. Method validation was carried out for establishing the specificity, linearity range, accuracy, sensitivity, robustness, precision and ruggedness. The method applicability was evaluated on different nanoformulations, i.e., solid lipid nanoparticles (SLNs), liposomes (LIPO), nanostructured lipid carriers (NLCs). The peaks of the analyte were found to be well resolved and two distinct RT were recorded for TAM and SFN. Calibration curves were found to be linear for TAM and SFN over concentration range of 6–24 μg/mL. All method validation criteria were within the range of acceptance. Relative standard deviation (%RSD) was observed to be <2% for inter- and intra-day precision. The application of developed method for estimation of drugs from the nanoformulations was suitabile for in vitro as well as in vivo studies.     

Simultaneous determination of terpenes and cannabidiol in hemp (Cannabis sativa L.) by fast gas chromatography with flame ionization detection

Hemp (Cannabis sativa L.) has become widely used in several sectors due to the presence of various bioactive compounds such as terpenes and cannabidiol. In general, terpenes and cannabidiol content is determined separately, which is time consuming. Thus, a fast gas chromatography with flame ionization detection method was validated for simultaneous determination of both terpenes and cannabidiol in hemp. The method enabled a rapid detection of 29 different terpenes and cannabidiol within a total analysis time of 16 min, with satisfactory sensitivity (limit of detection = 0.03–0.27 µg/mL, limit of quantitation = 0.10–0.89 µg/mL). The inter‐ and intraday precision (RSD) was <7.82 and <3.59%, respectively. Recoveries at two spiked concentration levels (low, 3.15 µg/mL; high, 20.0 µg/mL) were determined on both apical leaves (78.55–101.52%) and inflorescences (77.52–107.10%). The reproducibility (RSD) was <5.94 and <5.51% in apical leaves and inflorescences, respectively. The proposed and validated method is highly sensitive, robust, fast, and accurate for determination of the main terpenes and cannabidiol in hemp and could be routinely used for quality control.     

Simultaneous identification and quantification of bisphenol A and 12 bisphenol analogues in environmental samples using precolumn derivatization and ultra high performance liquid chromatography with tandem mass spectrometry

A method for the identification and quantification of bisphenol A and 12 bisphenol analogues in river water and sediment samples combining liquid–liquid extraction, precolumn derivatization, and ultra high‐performance liquid chromatography coupled with tandem mass spectrometry was developed and validated. Analytes were extracted from the river water sample using a liquid–liquid extraction method. Dansyl chloride was selected as a derivatization reagent. Derivatization reaction conditions affecting production of the dansyl derivatives were tested and optimized. All the derivatized target compounds were well separated and eluted in 10 min. Dansyl chloride labeled compounds were analyzed using a high‐resolution mass spectrometer with electrospray ionization in the positive mode, and the results were confirmed and quantified in the parallel reaction monitoring mode. The method validation results showed a satisfactory level of sensitivity. Linearity was assessed using matrix‐matched standard calibration, and good correlation coefficients were obtained. The limits of quantification for the analytes ranged from 0.005 to 0.02 ng/mL in river water and from 0.15 to 0.80 ng/g in sediment. Good reproducibility of the method in terms of intra‐ and interday precision was achieved, yielding relative standard deviations of less than 10.1 and 11.6%, respectively. Finally, this method was successfully applied to the analysis of real samples.     

Establishing a sensitive capillary electrophoresis‐UV method for direct determination of amino acids to evaluate vinegar quality

In this study, the capillary electrophoresis method with ultraviolet detection was established to directly determine amino acids in vinegar, according to the coordination interaction between amino acids (AAs) and copper ions. The online sweeping technique was combined to improve the detection sensitivity. The quality of vinegar was evaluated with AAs as parameters by United Nations Food Agriculture Organization/Word Health Organization AAs model and principal component analysis. Optimum conditions were obtained under 50 mM CuSO₄ and adjusted pH 4.40 with 8 mM acetate, 70 s injection time, 22.5 kV separation voltage, and 254 nm detected wavelength. Method validation, indicating good linearity (R² > 0.9989), precision with an RSD less than 8.0% (n = 5), LOD (0.13–0.25 μg/mL), LOQ (0.43–0.83 μg/mL) and recovery (80.5–112.6%). Under the optimal conditions, AAs in vinegar can be directly separated which is propitious for the quality evaluation of vinegar.     

A novel protocol for molecularly imprinted polymer filaments online coupled to GC–MS for the determination of androgenic steroids in urine

An online system that can perform dynamic microextraction, on‐coating derivatization and desorption, and subsequent GC–MS analysis with a large‐volume injection was developed. A derivatization cell as the conjunction of the online system was developed for the online extraction and derivatization. To evaluate the feasibility of the online system, methyltestosterone molecularly imprinted polymer filaments (MIPFs) were prepared for the selective online extraction of five androgenic steroids, namely, methyltestosterone, testosterone, epitestosterone, nandrolone, and metandienone. Under the optimized conditions, the detection limits of testosterone and epitestosterone were 0.09 and 0.12 μg/L, respectively, which were under the minimum required performance limits between 2 and 10 μg/L from the World Anti‐Doping Agency. The detection limits of the other three androgenic steroids were varied from 0.04 to 0.18 μg/L. Finally, the MIPFs–GC–MS method was applied for the determination of androgenic steroids in urine, and satisfactory recovery (78.0–96.9%) and reproducibility (3.2–8.9%) were obtained. The proposed online coupling system offers an attractive alternative for hyphenation to GC instruments and could also be extended to other adsorptive materials.     

GC–MS Measurement of 13C-Enrichment of Lactic Acid in Sepsis Plasma

Sepsis is a systemic inflammatory response syndrome arising from infection. The plasma lactic acid level is a reliable marker of sepsis. A novel procedure based on microwave-assisted derivatization followed by gas chromatography–mass spectrometry (GC–MS) has been developed for the rapid measurement of ¹³C-isotope enrichment of lactic acid in plasma. The derivatization conditions and method validation were studied. The method was applied to the measurements of isotopic enrichment of lactic acid in the plasma of a rabbits which had received the tracer ([1,2,3-¹³C₃] lactic acid) by carotid infusion 2.5 h before blood sampling from the portal vein. These results show that the proposed method has excellent precision (RSD less than 4.57%), linearity (slope = 0.9936; r ² = 0.9998), accuracy and selectivity. The analytical results show that microwave-assisted derivatization coupled to GC–MS is a rapid method for the direct isotopic measurement of deproteinised plasma. The method could be of great interest for metabolic studies in animal models and human patients.     

Ultrasonic‐assisted derivatization of estrogenic compounds in a cup horn booster and determination by GC‐MS

Cup horn boosters are miniaturized ultrasound baths that maximize efficiency and precision. The optimization of an ultrasonic‐assisted derivatization step by means of a cup horn booster and the determination of estrone, 17β‐estradiol, estriol, 17α‐ethynyl estradiol and mestranol was developed by GC‐MS. Different derivatization reagents and solvents were studied for maximizing the di‐derivatization of 17α‐ethynyl estradiol under ultrasound energy. Only N,O‐bis(trimethylsilyl)trifluoroacetamide with 1% of trimethylchlorosilane in pyridine gave satisfactory results and this mixture was further used in the optimization of the ultrasound assisted derivatization. The experiment designs included sonication time (1–10 min), sonication power (20–80%), sonication cycles (1–9), derivatization reagent volume (25–125 μL) and solvent volume (25–125 μL). Once the optimum conditions were fixed, the effect of organic matter and the frequency of the water bath change were studied. Finally, the validation of the analytical method was carried out using spiked natural and synthetic waters. Recoveries (natural (138–70%) and synthetic (112–89%)), the LODs (0.35–1.66 ng/L), and LOQs (1.16–5.52 ng/L) and the precision (0.2–5.3%) of the method were studied. This is the first work in the literature where a cup horn booster is used with the aim of minimizing derivatization time during the determination of estrogenic compounds.     

Stability indicating RP-HPLC method development and validation for oseltamivir API

The present study describes the development and subsequent validation of a stability indicating reverse-phase HPLC (RP-HPLC) method for the analysis of oseltamivir active pharmaceutical ingredient (API). The proposed RP-HPLC method utilizes Kromasil C(18), 5 microm, 250 mm x 4.6 mm i.d. column (at ambient temperature), gradient run (using acetonitrile and triethylamine as mobile phase), effluent flow rate (1.0 ml/min), and UV detection at 215 nm for analysis of oseltamivir. The described method was linear over the range of 70-130 microg/ml (r(2)=0.999). The precision, ruggedness and robustness values were also within the prescribed limits (<1% for system precision and <2% for other parameters). Oseltamivir was exposed to acidic, basic, oxidative and thermal stress conditions, and the stressed samples were analyzed by the proposed method. Chromatographic peak purity results indicated the absence of co-eluting peaks with the main peak of oseltamivir, which demonstrated the specificity of assay method for estimation of oseltamivir in presence of degradation products. The proposed method can be used for routine analysis of oseltamivir in quality control laboratories.     

Determination of Milnacipran in Human Plasma Using GC–MS

A new, simple, and fully validated gas chromatography–mass spectrometry (GC–MS) method was presented for quantitative analysis of milnacipran (MNP) in human plasma. MNP was efficiently derivatized with N-methyl-N-trimethylsilyltrifluoroacetamide (MSTFA) before analysis. The role of catalyst, temperature, time, solvent on the trimethylsilylation reaction were evaluated. The proposed method was fully validated by assessment of the following parameters: limits of detection and quantitation, precision, accuracy, linearity, specificity, stability, extraction recovery and robustness/ruggedness. The limit of quantitation (LOQ) was 30 ng mL^?1. The calibration curve was linear (r ² > 0.9988) in the range 30–500 ng mL^?1. The method was found specific, precise, accurate, selective and reliable according to validation data. This developed method was successfully applied to determine the steady state concentration of MNP in patients.     

Trimethylsilyldiazomethane derivatization coupled with solid-phase extraction for the determination of alendronate in human plasma by LC-MS/MS

Alendronate is an important representative of bisphosphonates, strongly polar compounds that lack chromophores. With rare exceptions, derivatization of the analytes is necessary for bioanalysis. In this study, a rapid liquid chromatography–tandem mass spectrometry method employing pre-column derivatization was developed and validated for the determination of alendronate concentrations in human plasma. The procedure was based on derivatization with trimethylsilyldiazomethane during solid-phase extraction on a weak anion-exchange solid-phase cartridge, which integrated sample purification and derivatization into one step. The alendronate derivative was eluted with methanol. Chromatographic separation was performed on a Capcell PAK-C18 column. The total run time was 6.5 min. The calibration curve was linear in the range 1.00–1,000 ng/mL using d6-alendronate as the internal standard. The lower limit of quantification was 1.00 ng/mL. The intra- and inter-assay precision (in RSD) calculated from quality control samples was less than 15%, and the accuracy was between 98.1% and 100.2%. The validated method was successfully applied to characterize the pharmacokinetic profiles of alendronate following the intravenous infusion of 5 or 10 mg alendronate sodium to healthy volunteers.     

Determination of sulfamethazine in swine and cattle feed by reversed-phase liquid chromatography with post-column derivatization: pre-collaborative study

In-house validation of a liquid chromatographic method for determination of sulfamethazine in swine and cattle feed was performed to verify that the method was ready for collaborative study under AOAC INTERNATIONAL guidelines. In this method, sulfamerazine is added during the extraction procedure and is used as an internal standard to correct for variable recovery of sulfamethazine from a variety of swine and cattle feed matrixes. The determinative step involves the use of post-column derivatization with dimethylaminobenzaldehyde which reacts with the primary amine group on the sulfonamides. Detection is at 450 nm, a wavelength at which most co-extracted matrix materials and other feed additives do not absorb light. The results indicate that the method recovery, precision, and ruggedness meet normal criteria to be ready for a collaborative study. Fortification experiments over a range of sulfamethazine concentrations from 0.006 to 0.26% showed an overall recovery relative to the internal standard of 100 +/- 2%. These studies include both swine and cattle feed matrixes. The mean recovery in the analysis of 3 beef cattle experimental feeds was 98.9%. The method results agreed with the AOAC INTERNATIONAL Official Method for colorimetric analysis of swine feed. Method precision was excellent during in-house validation studies, with coefficients of variation (CVs) ranging from about 0.5 to 3%. The method ruggedness was verified with an overall CV of 3.5%.     

LC Method with Precolumn Derivatization for Analysis of Mexiletine in Pharmaceutical Preparations

A isocratic, selective and accurate LC method of analysis of mexiletine in pharmaceutical preparations has been developed and validated. The method is based on derivatization of mexiletine with 4-chloro-7-nitrobenzofurazan in pH 9.0 borate buffer to yield a yellow product. Chromatography was performed on a C₁₈ column (150 × 4.6 mm i.d.) with acetonitrile–water 80:20 (v/v) as mobile phase at a flow rate of 1.0 mL min^?1. UV–visible absorbance detection was performed at 458 nm. The retention time of the mexiletine derivative was 4.10 min, and response was a linear function of concentration in the range 0.5–4.0 μg mL^?1 (r = 0.9998). The limits of detection and quantification were 0.05 and 0.15 μg mL^?1, respectively. Method validation revealed precision, sensitivity, and robustness were acceptable. Low RSD values are indicative of high precision, and high recovery values are indicative of the accuracy of the method. Results obtained by use of the proposed method for analysis of the mexiletine content of pharmaceutical a preparation were compared with those obtained by use of the official method. The method has been used for analysis of pharmaceutical preparations.     

Micellar electrokinetic capillary chromatography for the determination of Viagra and its metabolite (UK-103,320) in human serum

Micellar electrokinetic capillary chromatography (MEKC) was investigated for the determination of Viagra (sildenafil citrate, SC) and its metabolite (UK-103,320) in human serum in a concentration range of clinical interest. For MEKC, human serum samples spiked with SC and UK were obtained directly after elution with methanol from a tC18 cartridge. The extract was evaporated and regenerated in a solution 1 mM of phosphate buffer (pH 12.3) which contained a methanol percentage of 20% that was analyzed using phosphate buffer (pH 12.3, 10 mM) containing 30 mM sodium dodecyl sulfate (SDS) as separation electrolyte and a fused-silica capillary. This method gave satisfactory interday precision with respect to migration times relative standard deviation (RSD < 1%) and linear responses for the concentration ranges investigated (0.50-3.50 mg L(-1) for the compound SC and 0.90-4.60 mg L(-1) for UK). An intraday RSD (n = 5 graphs) between the slopes of the calibration graphs was acceptable (6.40%) for SC and (3.37%) for UK. A satisfactory interday precision between slopes was also obtained (RSD 4.10% for SC and a RSD 2.72% for UK) which demonstrated the ruggedness of this method. Detection limits (S/N = 3) were about 200 ng/mL for both compounds in human serum. MEKC was shown as a good method with regards to simplicity, precision and sensitivity.     

A validated HPLC‐fluorescence method with a semi‐micro column for routine determination of homocysteine,cysteine and cysteamine,and the relation between the thiol derivatives in normal human plasma

A semi‐micro column HPLC‐fluorescence method for routine determination of thiol derivatives such as homocysteine (Hcy), cysteine (Cys) and cysteamine (CA) is described. The thiol derivatives labeled with ammonium‐7‐fluorobenzo‐2‐oxa‐1,3‐diazole‐4‐sulfonate (SBD‐F) were isocratically separated within 12 min on a semi‐micro ODS column (Daisopak‐SP‐120‐5‐ODS‐BP) with a mixture of 25 mm acetate buffer (pH 2.00) and CH₃CN as a mobile phase. The purity and similarity of SBD‐thiols by a multi‐wavelength fluorescence detector were more than 92.3 and 96.7%. The detection limits of Hcy, Cys and CA at a signal‐to‐noise ratio of 3 were 0.16, 0.47 and 0.03 µm , respectively. Furthermore validation parameters such as accuracy, precision and robustness of the proposed method showed satisfactory results. Almost 850 plasma sample injections (range 572–1076, n = 3) for a column could be performed without differences in retention time and peak heights of labels. As an application of the proposed method, the determination of thiol derivatives in normal human plasma (n = 103) was demonstrated. The correlation coefficients between Hcy vs Cys and Hcy vs CA were 0.38 and −0.35, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Development and in-house validation of a microbiological assay for determination of cefepime in injectable preparations

Cefepime is a new parenteral cephalosporin that has been described as a fourth-generation, broad-spectrum antibiotic. This paper reports the development and in-house validation of an agar diffusion bioassay using a cylinder-plate method for the determination of cefepime in powder for injection. The validation performed yielded good results in terms of linearity, precision, accuracy, and robustness. The assay is based on the inhibitory effect of cefepime upon the strain of Micrococcus luteus ATCC 10240 used as the test microorganism. The results of assays were treated statistically by analysis of variance (ANOVA) and were found to be linear (r = 0.99993) in the selected range of 8.0-32.0 microg/mL; precise [repeatability: relative standard deviation (RSD) = 1.39%, intermediate precision: between-day RSD = 1.77%, and between-analyst RSD = 1.97%] and accurate. Comparison of bioassay and liquid chromatography by ANOVA showed no significant difference between methodologies. The results demonstrated the validity of the proposed bioassay, which is a simple and useful alternative methodology for cefepime determination in routine quality control.