The hydroxyl radical reaction rate constant and atmospheric transformation products of 2-butanol and 2-pentanol

The relative rate technique has been used to measure the hydroxyl radical (OH) reaction rate constant of +2-butanol (2BU, CH₃CH₂CH(OH)CH₃) and 2-pentanol (2PE, CH₃CH₂CH₂CH(OH)CH₃). 2BU and 2PE react with OH yielding bimolecular rate constants of (8.1±2.0)×10⁻¹² cm³molecule⁻¹s⁻¹ and (11.9±3.0)×10⁻¹² cm³molecule⁻¹s⁻¹, respectively, at 297±3 K and 1 atmosphere total pressure. Both 2BU and 2PE OH rate constants reported here are in agreement with previously reported values [1–4]. In order to more clearly define these alcohols' atmospheric reaction mechanisms, an investigation into the OH+alcohol reaction products was also conducted. The OH+2BU reaction products and yields observed were: methyl ethyl ketone (MEK, (60±2)%, CH₃CH₂C((DOUBLEBOND)O)CH₃) and acetaldehyde ((29±4)% HC((DOUBLEBOND)O)CH₃). The OH+2PE reaction products and yields observed were: 2-pentanone (2PO, (41±4)%, CH₃C((DOUBLEBOND)O)CH₂CH₂CH₃), propionaldehyde ((14±2)% HC((DOUBLEBOND)O)CH₂CH₃), and acetaldehyde ((40±4)%, HC((DOUBLEBOND)O)CH₃). The alcohols' reaction mechanisms are discussed in light of current understanding of oxygenated hydrocarbon atmospheric chemistry. Labeled (¹⁸O) 2BU/OH reactions were conducted to investigate 2BU's atmospheric transformation mechanism details. The findings reported here can be related to other structurally similar alcohols and may impact regulatory tools such as ground level ozone-forming potential calculations (incremental reactivity) [5]. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 745–752, 1998     

C−H Activation by Iron-Vanadium Bimetallic Oxide Cluster Anions FeV3O10− and FeV5O15−: A Comparison with Scandium-Vanadium Oxide Clusters

Late transition metal-bonded atomic oxygen radicals (LTM−O⋅⁻) have been frequently proposed as important active sites to selectively activate and transform inert alkane molecules. However, it is extremely challenging to characterize the LTM−O⋅⁻-mediated elementary reactions for clarifying the underlying mechanisms limited by the low activity of LTM−O⋅⁻ radicals that is inaccessible by the traditional experimental methods. Herein, benefiting from our newly-designed ship-lock type reactor, the reactivity of iron-vanadium bimetallic oxide cluster anions FeV₃O₁₀⁻ and FeV₅O₁₅⁻ featuring with Fe−O⋅⁻ radicals to abstract a hydrogen atom from C₂−C₄ alkanes has been experimentally characterized at 298 K, and the rate constants are determined in the orders of magnitude of 10⁻¹⁴ to 10⁻¹⁶ cm³ molecule⁻¹ s⁻¹, which are four orders of magnitude slower than the values of counterpart ScV₃O₁₀⁻ and ScV₅O₁₅⁻ clusters bearing Sc−O⋅⁻ radicals. Theoretical results reveal that the rearrangements of the electronic and geometric structures during the reaction process function to modulate the activity of Fe−O⋅⁻. This study not only quantitatively characterizes the elementary reactions of LTM−O⋅⁻ radicals with alkanes, but also provides new insights into structure-activity relationship of M−O⋅⁻ radicals.     

1,1,1,3,3,-pentafluorobutane (HFC-365mfc): atmospheric degradation and contribution to radiative forcing

The rate constant for the reaction of the hydroxyl radical with 1,1,1,3,3-pentafluorobutane (HFC-365mfc) has been determined over the temperature range 278–323K using a relative rate technique. The results provide a value of k(OH+CF₃CH₂CF₂CH₃)=2.0×10⁻¹²exp(−1750±400/T) cm³ molecule⁻¹ s⁻¹ based on k(OH+CH₃CCl₃)=1.8×10⁻¹² exp (−1550±150/T) cm³ molecule⁻¹ s⁻¹ for the rate constant of the reference reaction. Assuming the major atmospheric removal process is via reaction with OH in the troposphere, the rate constant data from this work gives an estimate of 10.8 years for the tropospheric lifetime of HFC-365mfc. The overall atmospheric lifetime obtained by taking into account a minor contribution from degradation in the stratosphere, is estimated to be 10.2 years. The rate constant for the reaction of Cl atoms with 1,1,1,3,3-pentafluorobutane was also determined at 298±2 K using the relative rate method, k(Cl+CF₃CH₂CF₂CH₃)=(1.1±0.3)×10⁻¹⁵ cm³ molecule⁻¹ s⁻¹. The chlorine initiated photooxidation of CF₃CH₂CF₂CH₃ was investigated from 273–330 K and as a function of O₂ pressure at 1 atmosphere total pressure using Fourier transform infrared spectroscopy. Under all conditions the major carbon-containing products were CF₂O and CO₂, with smaller amounts of CF₃O₃CF₃. In order to ascertain the relative importance of hydrogen abstraction from the (SINGLE BOND)CH₂(SINGLE BOND) and (SINGLE BOND)CH₃ groups in CF₃CH₂CF₂CH₃, rate constants for the reaction of OH radicals and Cl atoms with the structurally similar compounds CF₃CH₂CCl₂F and CF₃CH₂CF₃ were also determined at 298 K k(OH+CF₃CH₂CCl₂F)=(8±3)×10⁻¹⁶ cm³ molecule⁻¹ s⁻¹; k(OH+CF₃CH₂CF₃)=(3.5±1.5)×10⁻¹⁶ cm³ molecule⁻¹ s⁻¹; k(Cl+CF₃CH₂CCl₂F)=(3.5±1.5)×10⁻¹⁷ cm³ molecule⁻¹ s⁻¹]; k(Cl+CF₃CH₂CF₃)<1×10⁻¹⁷ cm³ molecule⁻¹ s⁻¹. The results indicate that the most probable site for H-atom abstraction from CF₃CH₂CF₂CH₃ is the methyl group and that the formation of carbonyl compounds containing more than a single carbon atom will be negligible under atmospheric conditions, carbonyl difluoride and carbon dioxide being the main degradation products. Finally, accurate infrared absorption cross-sections have been measured for CF₃CH₂CF₂CH₃, and jointly used with the calculated overall atmospheric lifetime of 10.2 years, in the NCAR chemical-radiative model, to determine the radiative forcing of climate by this CFC alternative. The steady-state Halocarbon Global Warming Potential, relative to CFC-11, is 0.17. The Global Warming Potentials relative to CO₂ are found to be 2210, 790, and 250, for integration time-horizons of 20, 100, and 500 years, respectively. © 1997 John Wiley & Sons, Inc.     

PHOTOFRAGMENTATION OF HYDROXYACETONE, 1.3-DIHYDROXYACETONE, AND 1.3-DICARBOXYACETONE IN AQUEOUS SOLUTION. AN EPR STUDY

Abstract —On photoexcitation, hydroxyacetone undergoes a Norrish-type-1 fragmentation to yield CH₃CO and CH₂OH. CH₂OH is identified by its EPR spectrum. The existence of CH₃CO is inferred from the presence of diacetyl and acetaldehyde in irradiated solutions. Above pH 5, in addition to CH₂OH, the cis and trans forms of the hydroxyacetone enediol radical anion, CH₃C(O^-)=C(O***)H, are detected. 1.3-Dihydroxyacetone is photodecomposed to HOCH₂C?O and C?H₂OH. The former radical decarbonylates to yield CH₂OH and CO. At 254 nm the overall quantum yield of CO production is 0.75. Above pH 5, in addition to CH₂OH, the cis and trans forms of the 1.3-dihydroxyacetone enediol radical anion, HOCH₂C(O^-)C(O***)H, are observed. Electronically excited hydroxyacetone and 1.3-dihydroxyacetone react exclusively by C-C fragmentation, and no H-abstraction from H-donors is observed. In contrast, electronically excited 1.3-dicarboxyacetone shows H-abstraction from H-donors in competition with C-C fragmentation. In the absence of H-donors, fragmentation resulting in CH₂CO₂^- and ^-O₂CCH₂C?O occurs followed by decarbonylation of ^-O₂H₂C?O. At 254 nm the quantum yield of CO production is 0.02. In the presence of H-donors, H-abstraction, yielding HO₂CCH₂C(OH)CH₂CO₂, predominates.     

Rate constants and vibrational distributions for water-forming reactions of OH and OD radicals with thioacetic acid, 1,2-ethanedithiol and tert-butanethiol

Reactions of OH and OD radicals with CH₃C(O)SH, HSCH₂CH₂SH, and (CH₃)₃CSH were studied at 298 K in a fast-flow reactor by infrared emission spectroscopy of the water product molecules. The rate constants (1.3 ± 0.2) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ for the OD + CH₃C(O)SH reaction and (3.8 ± 0.7) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ for the OD + HSCH₂CH₂SH reaction were determined by comparing the HOD emission intensity to that from the OD reaction with H₂S, and this is the first measurement of these rate constants. In the same manner, using the OD + (C₂H₅)₂S reference reaction, the rate constant for the OD + (CH₃)₃CSH reaction was estimated to be (3.6 ± 0.7) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. Vibrational distributions of the H₂O and HOD molecules from the title reactions are typical for H-atom abstraction reactions by OH radicals with release of about 50% of the available energy as vibrational energy to the water molecule in a 2:1 ratio of stretch and bend modes.     

The hydroxyl radical reaction rate constant and products of methyl isobutyrate

The relative rate technique has been used to measure the rate coefficient for the reaction of the hydroxyl radical (OH) with methyl isobutyrate (MIB, (CH₃)₂ CHC(O) O CH₃) to be (1.7 ± 0.4) × 10⁻¹²cm³molecule⁻¹s⁻¹ at 297 ± 3 K and 1 atmosphere total pressure. To more clearly define MIB's atmospheric degradation mechanism, the products of the OH + MIB reaction were also determined. The observed products and their yields were: acetone (97 ± 1%, (CH₃)₂C(O)) and methyl pyruvate (MP, 3.3 ± 0.3%, CH₃C(O)C(O) O CH₃). The products' formation pathways are discussed in light of current understanding of the atmospheric chemistry of oxygenated organic compounds. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 551–557, 1999     

In Situ Metal-Assisted Ligand Modification Induces Mn4 Cluster-to-Cluster Transformation: A Crystallography,Mass Spectrometry,and DFT Study

Dehydration of (S,S)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethane-1,2-diol (H₄L) to (Z)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethenol) (H₃L′) was found to be metal-assisted, occurs under solvothermal conditions (H₂O/CH₃OH), and leads to [Mn^II₄(H₃L)₄Cl₂]Cl₂ ⋅ 5 H₂O ⋅ 5 CH₃OH ( Mn₄L₄ ) and [Mn^II₄(H₂L′)₆(μ₃-OH)]Cl ⋅ 4 CH₃OH ⋅ H₂O ( Mn₄L′₆ ), respectively. Their structures were determined by single-crystal XRD. Extensive ESI-MS studies on solutions and solids of the reaction led to the proposal consisting of an initial stepwise assembly of Mn₄L₄ from the reactants via [MnL] and [Mn₂L₂] below 80 °C, and then disassembly to [MnL] and [MnL₂] followed by ligand modification before reassembly to Mn₄L′₆ via [MnL′], [MnL′₂], and [Mn₂L′₃] with increasing solvothermal temperature up to 140 °C. Identification of intermediates [Mn₄L_xL′_6−x] (x=5, 4, 3, 2, 1) in the process further suggested an assembly/disassembly/in situ reaction/reassembly transformation mechanism. These results not only reveal that multiple phase transformations are possible even though they were not realized in the crystalline state, but also help to better understand the complex transformation process between coordination clusters during “black-box” reactions.     

ZnO and TiO2 clusters as catalyst in the addition and abstraction reaction of acrylic acid with the OH radical

The present work displays the theoretical analysis on the role of metal oxide clusters as an effective catalyst in the reaction between acrylic acid and OH radical, which has an energy barrier of 12.4 kcal/mol. The formation of metal oxide cluster such as ZnO and TiO₂ with varying size from monomer to hexamer is analyzed using cohesive energy, which increases with cluster size. Adsorption of acrylic acid on clusters reveals that dimer ZnO and tetramer TiO₂ are good adsorbed entities. The dimer ZnO and tetramer TiO₂ clusters have reduced the barrier height. However, from the thermodynamical analysis of H-abstraction and OH addition reaction, the dimer ZnO cluster is found to be a good catalyst than a tetramer TiO₂ cluster. The favorable H abstraction and OH addition reactions are feasible at the active methylene group (–CH). OH addition reactions dominate over the H abstraction reaction. Further, the presence of metal oxide clusters enhances the rate of the reaction between acrylic acid and OH radical. The kinetics of the favorable reaction with a dimer ZnO cluster has a rate constant of 7.80 × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹, which is higher than the literature report (1.75 × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹). Overall, ZnO and TiO₂ metal oxide clusters can be effectively utilized as catalyst.     

Computational study on the mechanisms and kinetics of the CH<Subscript>2</Subscript>=CHCH<Subscript>2</Subscript>I with OH reaction

The potential energy surface for the reaction of OH with CH₂═CHCH₂I has been studied at the CCSD(T)//M06-2X/6-311++G(d,p) level of theory. Three different reaction entrances were revealed, namely, terminal-C addition, central-C addition, and H-abstraction, leading to CH₂OHCHCH₂I (IM1), CH₂CHOHCH₂I (IM2), and H₂O?+?C₃H₄I, respectively. Several conceivable decomposition and isomerization channels were also examined for IM1 and IM2. The total and individual rate constants were calculated by using multichannel RRKM and TST theories over a wide range of temperatures (200–3000 K) and pressures(10^?14–10¹⁴ Torr).     

The hydroxyl radical reaction rate constants and atmospheric reaction products of three siloxanes

The relative rate technique has been used to measure the hydroxyl radical (OH) reaction rate constant of hexamethyldisiloxane (MM, (CH₃)₃Si-O-Si(CH₃)₃), octamethyltrisiloxane (MDM, (CH₃)₃Si-O-Si(CH₃)₂-O-Si(CH₃)₃), and decamethyltetrasiloxane (MD₂M, (CH₃)₃Si-O-Si(CH₃)₂-O-Si(CH₃)₂-O-Si(Ch₃)₃). Hexamethyldisiloxane, octamethyltrisiloxane, and decamethyltetrasiloxane react with OH with bimolecular rate constants of 1.32 ± 0.05 × 10⁻¹² cm³molecule⁻¹s⁻¹, 1.83 ± 0.09 × 10⁻¹² cm³ molecule⁻¹s⁻¹, and 2.66 ± 0.13 × 10⁻¹² cm³molecule⁻¹s⁻¹, respectively. Investigation of the OH + siloxane reaction products yielded trimethylsilanol, pentamethyldisiloxanol, heptamethyltetrasiloxanol, hexamethylcyclotrisiloxane, octamethylcyclotetrasiloxane, and other compounds. Several of these products have not been reported before because these siloxanes and the proposed reaction mechanisms yielding these products are complicated. Some unusual cyclic siloxane products were observed and their formation pathways are discussed in light of current understanding of siloxane atmospheric chemistry. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 445–451, 1997.     

Solvent-Vapor-Induced Reversible Single-Crystal-to-Single-Crystal Transformation of a Triphosphaazatriangulene-Based Metal–Organic Framework

A triphosphaazatriangulene (H₃L) was synthesized through an intramolecular triple phospha-Friedel–Crafts reaction. The H₃L triangulene contains three phosphinate groups and an extended π-conjugated framework, which enables the stimuli-responsive reversible transformation of [Cu(HL)(DMSO)⋅(MeOH)]_n, a 3D-MOF that exhibits reversible sorption characteristics, into (H₃L⋅0.5 [Cu₂(OH)₄⋅6 H₂O] ⋅4 H₂O), a 1D-columnar assembled proton-conducting material. The hydrophilic nature of the latter resulted in a proton conductivity of 5.5×10⁻³ S cm⁻¹ at 95 % relative humidity and 60 °C.     

The hydroxyl radical reaction rate constant and atmospheric transformation products of 2‐propoxyethanol

The relative rate technique has been used to measure the hydroxyl radical (OH) reaction rate constant of 2‐propoxyethanol (2PEOH, CH₃CH₂CH₂OCH₂CH₂(OH)). 2PEOH reacts with OH with a bimolecular rate constant of (21.4 ± 6.0) × 10⁻¹² cm³molecule⁻¹s⁻¹ at 297 ± 3 K and 1 atm total pressure, which is a little larger than previously reported [1]. Assuming an average OH concentration of 1 × 10⁶ molecules cm⁻³, an atmospheric lifetime of 13 h is calculated for 2PEOH. In order to more clearly define this hydroxy ether's atmospheric reaction mechanism, an investigation into the OH + 2PEOH reaction products was also conducted. The OH + 2PEOH reaction products and yields observed were: propyl formate (PF, 47 ± 2%, CH₃CH₂CH₂OC(O)H), 2 propoxyethanal (CH₃CH₂CH₂OCH₂C(O)H 15 ± 1%), and 2‐ethyl‐1,3‐dioxolane (5.4 ± 0.4%). The 2PEOH reaction mechanism is discussed in light of current understanding of oxygenated hydrocarbon atmospheric chemistry. The findings reported here can be related to other structurally similar alcohols and may impact regulatory tools such as ground‐level ozone‐forming potential calculations (incremental reactivity) [2]. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 315–322, 1999     

Kinetics of the Temperature-Dependent eaq− and ⋅OH Radical Reactions with Cr(III) Ions in Aqueous Solutions

The reactivity of chromium(III) species with the major oxidizing and reducing radiolysis products of water was investigated in aqueous solutions at temperatures up to 150 °C. The reaction between the hydrated electron (e_aq⁻) and Cr(III) species showed a positive temperature dependence over this temperature range. The reaction was also studied in pH 2.5 and 3.5 solutions for the first time. This work also studied the reaction between acidic Cr(III) species and the hydroxyl radical (⋅OH). It was found that Cr³⁺ did not react significantly with the ⋅OH radical, but the first hydrolysis species, Cr(OH)²⁺, did with a rate coefficient of k= (7.2±0.3)×10⁸ M⁻¹ s⁻¹ at 25 °C. The oxidation of Cr(OH)²⁺ by the ⋅OH radical formed an absorbing product species that ultimately oxidized to give Cr(VI). These newly measured reaction rates allow for the development of improved models of aqueous chromium speciation for the effective remediation of liquid high-level nuclear waste via vitrification processes.     

Back Cover: Illustrating the Fate of Methyl Radical in Photocatalytic Methane Oxidation over Ag−ZnO by in situ Synchrotron Radiation Photoionization Mass Spectrometry (Angew. Chem. Int. Ed. 32/2023)

Photocatalysis has emerged as an ideal method for the direct activation and conversion of methane under mild conditions. In this reaction, methyl radical (⋅CH₃) was deemed a key intermediate that affected the yields and selectivity of the products. However, direct observation of ⋅CH₃ and other intermediates is still challenging. Here, a rectangular photocatalytic reactor coupled with in situ synchrotron radiation photoionization mass spectrometry (SR-PIMS) was developed to detect reactive intermediates within several hundred microseconds during photocatalytic methane oxidation over Ag−ZnO. Gas phase ⋅CH₃ generated by photogenerated holes (O⁻) was directly observed, and its formation was demonstrated to be significantly enhanced by coadsorbed oxygen molecules. Methoxy radical (CH₃O⋅) and formaldehyde (HCHO) were confirmed to be key C1 intermediates in photocatalytic methane overoxidation to CO₂. The gas-phase self-coupling reaction of ⋅CH₃ contributes to the formation of ethane, which indicates the key role of ⋅CH₃ desorption in the highly selective synthesis of ethane. Based on the observed intermediates, the reaction network initiated from ⋅CH₃ of photocatalytic methane oxidation could be clearly illustrated, which is helpful for studying the photocatalytic methane conversion processes.     

Kinetic study of the reaction OH + HI by laser photolysis-resonance fluorescence

The gas phase reaction of OH radicals with hydrogen iodide (HI) has been studied using a Laser Photolysis-Resonance Fluorescence (LP-RF) apparatus, recently developed in our group. The measured rate constant at 298 K was (2.7 ± 0.2) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. This rate constant is compared with the ones of the reactions OH + HCl and OH + HBr. The role of the reaction OH + HI in marine tropospheric chemistry is discussed. In addition, the LP-RF apparatus was tested and validated by measuring the following rate constants (in cm³ molecule⁻¹ s⁻¹ units): 𝓀(OH + HNO₃) = (1.31 ± 0.06) × 10⁻¹³ at p = 27 and 50 Torr of argon and 𝓀(OH + C₃H₈) = (1.22 ± 0.08) × 10⁻¹². These rate constants are in very good agreement with the literature data.     

The hydroxyl radical reaction rate constant and products of ethyl 3-ethoxypropionate

The relative rate technique has been used to measure the hydroxyl radical (OH) reaction rate constant of ethyl 3-ethoxypropionate (EEP, CH₃CH₂(SINGLE BOND)O(SINGLE BOND)CH₂CH₂C(O)O(SINGLE BOND)CH₂CH₃). EEP reacts with OH with a bimolecular rate constant of (22.9±7.4)×10⁻¹² cm³ molecule⁻¹s⁻¹ at 297±3 K and 1 atmosphere total pressure. In order to more clearly define EEP's atmospheric reaction mechanism, an investigation into the OH+EEP reaction products was also conducted. The OH+EEP reaction products and yields observed were: ethyl glyoxate (EG, 25±1% HC((DOUBLE BOND)O)C((DOUBLE BOND)O)(SINGLE BOND)O(SINGLE BOND)CH₂CH₃), ethyl (2-formyl) acetate (EFA, 4.86±0.2%, HC((DOUBLE BOND)O)(SINGLE BOND)CH₂(SINGLE BOND)C((DOUBLE BOND)O)(SINGLE BOND)O(SINGLE BOND)CH₂CH₃), ethyl (3-formyloxy) propionate (EFP, 30±1%, HC((DOUBLE BOND)O)(SINGLE BOND)O(SINGLE BOND)CH₂CH₂(SINGLE BOND)C((DOUBLE BOND)O)(SINGLE BOND)O(SINGLE BOND)CH₂CH₃), ethyl formate (EF, 37±1%, HC((DOUBLE BOND)O)O(SINGLE BOND)CH₂CH₃), and acetaldehyde (4.9±0.2%, HC((DOUBLE BOND)O)CH₃). Neither the EEP's OH rate constant nor the OH/EEP reaction products have been previously reported. The products' formation pathways are discussed in light of current understanding of oxygenated hydrocarbon atmospheric chemistry. © 1997 John Wiley & Sons, Inc.     

Rate coefficients for reactions of OH radicals with CH3D,CH2D2, CHD3, and CD4

Fourier transform infrared (FTIR) smog chamber techniques were used to investigate the atmospheric chemistry of the isotopologues of methane. Relative rate measurements were performed to determine the kinetics of the reaction of the isotopologues of methane with OH radicals in cm³ molecule⁻¹ s⁻¹ units: k(CH₃D + OH) = (5.19 ± 0.90) × 10⁻¹⁵, k(CH₂D₂ + OH) = (4.11 ± 0.74) × 10⁻¹⁵, k(CHD₃ + OH) = (2.14 ± 0.43) × 10⁻¹⁵, and k(CD₄ + OH) = (1.17 ± 0.19) × 10⁻¹⁵ in 700 Torr of air diluent at 296 ± 2 K. Using the determined OH rate coefficients, the atmospheric lifetimes for CH_4–xD_x (x = 1–4) were estimated to be 6.1, 7.7, 14.8, and 27.0 years, respectively. The results are discussed in relation to previous measurements of these rate coefficients.     

Synthesis of Ti(OH)OF ⋅ 0.66 H2O in Imidazolium-based Ionic Liquids

The influence of the cation of imidazolium-derived ionic liquids (ILs) on a low-temperature solution-based synthesis of hexagonal tungsten bronze (HTB) type Ti(OH)OF ⋅ 0.66 H₂O and bronze-type TiO₂(B) is investigated. The IL (C_xmim BF₄) acts as solvent and also as reaction partner with respect to the decomposition of [BF₄]⁻, releasing F⁻. In the present study, the chain length of the alkyl chain side groups attached to the imidazolium ring was varied (C₂mim BF₄ to C₁₀mim BF₄), and the obtained solids were analyzed by Powder X-Ray diffraction (PXRD) followed by Rietveld refinement. As a main finding these analyses indicate a transformation of Ti(OH)OF ⋅ 0.66 H₂O into TiO₂(B), and upon prolonged reaction time finally also into anatase TiO₂. Rietveld analysis suggests that when using ILs with longer alkyl chains, the conversion of Ti(OH)OF ⋅ 0.66 H₂O is slower compared to syntheses performed with smaller alkyl chains. Hence, Ti(OH)OF ⋅ 0.66 H₂O appears to be metastable and is stabilized by long-chain ILs serving as surfactant attached to the crystallites’ surface. In this view, the ILs shield the nanoparticles and thus slow down the conversion into the more stable compounds. This confirms previous findings that ILs act as both, solvent and reaction medium in this reaction, thus enabling the synthesis of peculiar Ti-oxides.     

Comparative Study of the Supercapacitive Performance of Three Ferrocene-Based Structures: Targeted Design of a Conductive Ferrocene-Functionalized Coordination Polymer as a Supercapacitor Electrode

As redox-active based supercapacitors are known as highly desirable next-generation supercapacitor electrodes, the targeted design of two ferrocene-functionalized (Fc(COOH)₂) clusters based on coinage metals, [(PPh₃)₂AgO₂CFcCO₂Ag(PPh₃)₂]₂ ⋅ 7 CH₃OH (SC₁: super capacitor) and [(PPh₃)₃CuO₂CFcCO₂Cu(PPh₃)₃] ⋅ 3 CH₃OH (SC₂), is reported. Both structures are fully characterized by various techniques. The structures are utilized as energy storage electrode materials, giving 130 F g⁻¹ and 210 F g⁻¹ specific capacitance at 1.5 A g⁻¹ in Na₂SO₄ electrolyte, respectively. The obtained results show that the presence of Cu^I instead of Ag^I improves the supercapacitive performance of the cluster. Further, to improve the conductivity, the PSC₂ ([(PPh₃)₂CuO₂CFcCO₂]_∞), a polymeric structure of SC₂, was synthesized and used as an energy storage electrode. PSC₂ displays high conductivity and gives 455 F g⁻¹ capacitance at 3 A g⁻¹. The PSC₂ as a supercapacitor electrode presents a high power density (2416 W kg⁻¹), high energy density (161 Wh kg⁻¹), and long cycle life over 4000 cycles (93 %). These results could lead to the amplification of high-performance supercapacitors in new areas to develop real applications and stimulate the use of the targeted design of coordination polymers without hybridization or compositions with additive materials.     

Rate constants for the reactions of methylvinyl ketone,methacrolein, methacrylic acid,and acrylic acid with ozone

Rate constants for the reaction of ozone with methylvinyl ketone (H₂C(DOUBLEBOND)CHC(O)CH₃), methacrolein (H₂C(DOUBLEBOND)C(CH₃)CHO), methacrylic acid (H₂C(DOUBLEBOND)C(CH₃)C(O)OH), and acrylic acid (H₂C(DOUBLEBOND)CHC(O)OH) were measured at room temperature (296±2 K) in the presence of a sufficient amount of cyclohexane to scavenge OH-radicals. Results from pseudo-first-order experiments in the presence of excess ozone were found not to be consistent with relative rate measurements. It appeared that the formation of the so-called Criegee-intermediates leads to an enhanced decrease in the concentration of the two organic acids investigated. It is shown that the presence of formic acid, which is known to react efficiently with Criegee-intermediates, diminishes the observed removal rate of the organic acids. The rate constant for the reaction of ozone with the unsaturated carbonyl compounds methylvinyl ketone and methacrolein was found not to be influenced by the addition of formic acid. Rate constants for the reaction of ozone determined in the presence of excess formic acid are (in cm³ molecule⁻¹ s⁻¹): methylvinyl ketone (5.4±0.6)×10⁻¹⁸; methacrolein (1.3±0.14)×10⁻¹⁸; methacrylic acid (4.1±0.4)×10⁻¹⁸; and acrylic acid (0.65±0.13)×10⁻¹⁸. Results are found to be consistent with the Criegee mechanism of the gas-phase ozonolysis. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 769–776, 1998