Versatile Neuromorphic Modulation and Biosensing based on N-type Small-molecule Organic Mixed Ionic-Electronic Conductors

The ion/chemical-based modulation feature of organic mixed ionic-electronic conductors (OMIECs) are critical to advancing next generation bio-integrated neuromorphic hardware. Despite achievements with polymeric OMIECs in organic electrochemical neuronal synapse (OENS). However, small molecule OMIECs based OENS has not yet been realized. Here, for the first time, we demonstrate an effective materials design concept of combining n-type fused all-acceptor small molecule OMIECs with subtle side chain optimization that enables robustly and flexibly modulating versatile synaptic behavior and sensing neurotransmitter in solid or aqueous electrolyte, operating in accumulation modes. By judicious tuning the ending side chains, the linear oligoether and butyl chain derivative gNR-Bu exhibits higher recognition accuracy for a model artificial neural network (ANN) simulation, higher steady conductance states and more outstanding ambient stability, which is superior to the state-of-art n-type OMIECs based OENS. These superior artificial synapse characteristics of gNR-Bu can be attributed to its higher crystallinity with stronger ion bonding capacities. More impressively, we unprecedentedly realized n-type small-molecule OMIECs based OENS as a neuromorphic biosensor enabling to respond synaptic communication signals of dopamine even at sub-μM level in aqueous electrolyte. This work may open a new path of small-molecule ion-electron conductors for next-generation ANN and bioelectronics.     

Electron-Deficient Polycyclic Molecules via Ring Fusion for n-Type Organic Electrochemical Transistors

The primary challenge for n-type small-molecule organic electrochemical transistors (OECTs) is to improve their electron mobilities and thus the key figure of merit μC*. Nevertheless, few reports in OECTs have specially proposed to address this issue. Herein, we report a 10-ring-fused polycyclic π-system consisting of the core of naphthalene bis-isatin dimer and the terminal moieties of rhodanine, which features intramolecular noncovalent interactions, high π-delocalization and strong electron-deficient characteristics. We find that this extended π-conjugated system using the ring fusion strategy displays improved electron mobilities up to 0.043 cm² V⁻¹ s⁻¹ compared to our previously reported small molecule gNR, and thereby leads to a remarkable μC* of 10.3 F cm⁻¹ V⁻¹ s⁻¹ in n-type OECTs, which is the highest value reported to date for small-molecule OECTs. This work highlights the importance of π-conjugation extension in polycyclic-fused molecules for enhancing the performance of n-type small-molecule OECTs.     

Semiconducting Polymers Based on Simple Electron-Deficient Cyanated trans-1,3-Butadienes for Organic Field-Effect Transistors

Developing high-performance but low-cost n-type polymers remains a significant challenge in the commercialization of organic field-effect transistors (OFETs). To achieve this objective, it is essential to design the key electron-deficient units with simple structures and facile preparation processes, which can facilitate the production of low-cost n-type polymers. Herein, by sequentially introducing fluorine and cyano functionalities onto trans-1,3-butadiene, we developed a series of structurally simple but highly electron-deficient building blocks, namely 1,4-dicyano-butadiene ( CNDE ), 3-fluoro-1,4-dicyano-butadiene ( CNFDE ), and 2,3-difluoro-1,4-dicyano-butadiene ( CNDFDE ), featuring a highly coplanar backbone and deep-positioned lowest unoccupied molecular orbital (LUMO) energy levels (−3.03–4.33 eV), which render them highly attractive for developing n-type semiconducting polymers. Notably, all these electron-deficient units can be easily accessed by a two-step high-yield synthetic procedure from low-cost raw materials, thus rendering them highly promising candidates for commercial applications. Upon polymerization with diketopyrrolopyrrole ( DPP ), three copolymers were developed that demonstrated unipolar n-type transport characteristics in OFETs with the highest electron mobility of >1 cm² V⁻¹ s⁻¹. Hence, CNDE , CNFDE , and CNDFDE represent a class of novel, simple, and efficient electron-deficient units for constructing low-cost n-type polymers, thereby providing valuable insight for OFET applications.     

Organic Electrochemical Transistor Based on Hydrophobic Polymer Tuned by Ionic Gels

Hydrophobic conjugated polymers have poor ionic transport property, so hydrophilic side chains are often grafted for their application as organic electrochemical transistors (OECTs). However, this modification lowers their charge transport ability. Here, an ionic gel interfacial layer is applied to improve the ionic transport while retaining the charge transport ability of the polymers. By using the ionic gels comprising gel matrix and ionic liquids as the interfacial layers, the hydrophobic polymer achieves the OECT feature with high transconductance, low threshold voltage, high current on/off ratio, short switching time, and high operational stability. The working mechanism is also revealed. Moreover, the OECT performance can be tuned by varying the types and ratios of ionic gels. With the proposed ionic gel strategy, OECTs can be effectively realized with hydrophobic conjugated polymers.     

Unique Octupolar 2D-Polymer Frameworks as Mixed Conductors and Metal-Free Catalysts for Dual-Promoted Li and S Electrochemistry: Multi-regulation Role of Ethoxylation Chemistry

Here, we for the first time introduce ethoxylation chemistry to develop a new octupolar cyano-vinylene-linked 2D polymer framework (Cyano-OCF-EO) capable of acting as efficient mixed electron/ion conductors and metal-free sulfur evolution catalysts for dual-promoted Li and S electrochemistry. Our strategy creates a unique interconnected network of strongly-coupled donor 3-(acceptor-core) octupoles in Cyano-OCF-EO, affording enhanced intramolecular charge transfer, substantial active sites and crowded open channels. This enables Cyano-OCF-EO as a new versatile separator modifier, which endows the modified separator with superior catalytic activity for sulfur conversion and rapid Li ion conduction with the high Li⁺ transference number up to 0.94. Thus, the incorporation of Cyano-OCF-EO can concurrently regulate sulfur redox reactions and Li-ion flux in Li−S cells, attaining boosted bidirectional redox kinetics, inhibited polysulfide shuttle and dendrite-free Li anodes. The Cyano-OCF-EO-involved Li−S cell is endowed with excellent overall electrochemical performance especially large areal capacity of 7.5 mAh cm⁻² at high sulfur loading of 8.7 mg cm⁻². Mechanistic studies unveil the dominant multi-promoting effect of the triethoxylation on electron and ion conduction, polysulfide adsorption and catalytic conversion as well as previously-unexplored −CN/C−O dual-site synergistic effect for enhanced polysulfide adsorption and reduced energy barrier toward Li₂S conversion.     

Recent Progresses on the High Performance Organic Electrochemical Transistors

Organic electrochemical transistor(OECT) with bulk current modulation capability based on the ion penetration into the organic semiconducting channel exhibits unique features, including high transconductance, low voltage and large capacitance. The high current at a low voltage, together with the compatibility with aqueous environment, makes OECT particularly suitable for bioelectronic applications, such as biological interfacing, printed logic circuitry and neuromorphic devices. However, the operation mechanism and structure-performance relationship of OECT are rather complicated and remain unclear to date. One of the critical issues is the ion penetration and transportation process. This review focuses on the research progresses of how to improve the OECT performance specifically through materials design, interfacing and morphology modulation. Different strategies of promoting the ion doping process are compared and discussed in order to optimize the device performance so that a deep understanding of the OECT operation principle could be gained.     

Electronic Effect-Modulated Enhancements of Proton Conductivity in Porous Organic Polymers

We proposed a new strategy to maximize the density of acidic groups by modulating the electronic effects of the substituents for high-performance proton conductors. The conductivity of the sulfonated 1-MeL40-S with methyl group corresponds to 2.29×10⁻¹ S cm⁻¹ at 80 °C and 90 % relative humidity, remarkably an 22100-fold enhancement over the nonsulfonated 1-MeL40 . 1-MeL40-S maintains long-term conductivity for one month. We confirm that this synthetic method is generalized to the extended version POPs, 2-MeL40-S and 3-MeL40-S . In particular, the conductivities of the POPs compete with those of top-level porous organic conductors. Moreover, the activation energy of the POPs is lower than that of the top-performing materials. This study demonstrates that systematic alteration of the electronic effects of substituents is a useful route to improve the conductivity and long-term durability of proton-conducting materials.     

有机合成化学"三位一体"混合教学模式探索与实践

In order to improve the quality of teaching and cultivate chemical innovation talents in university for nationalities, in the course of organic synthetic chemistry curriculum construction, efforts were made to overcome problems such as the single teaching objective, abstract and boring teaching content, tedious and relatively dull teaching methods and low enthusiasm for students' learning, etc. According to the study rule of "before class-on class-after class", the trinity mixed teaching mode of "teaching goal-teaching means-practice examination" was constructed. Through the construction of the "teaching goal-teaching means-innovative practice" trinity mixed teaching mode, we refined teaching objectives, optimized teaching methods, implemented small classes, improved assessment methods, designed comprehensive laboratory programs, reinforced practices, and reformed the assessment measures. Discussion on teaching reform and practice of organic synthetic chemistry was carried out from multiple perspectives. Through the practice of teaching reform, the teaching effect has been improved, the enthusiasm of students to learn organic synthetic chemistry has been improved, and the expected effect of cultivating students' innovative ability has been achieved.     

The impact of regiochemistry of conjugated molecules on the performance of organic electronic devices

Organic photovoltaics and field-effect transistors have attracted considerable attention due to the easy fabrication,low cost,light weight,and flexibility.Unsymmetrical conjugated building blocks are widely utilized for the design of new organic π-functional materials in order to achieve high-performance electronic devices,which has become a hot research topic in recent years.In this review,we summarized some typical organic π-functional materials with regioregular conjugated backbones with unsymmetrical electron-deficiency moieties and focused on the influence of regiochemistry on the final device performance.     

侧链含自由基单元的1,4-吡咯并吡咯二酮共轭聚合物的合成和半导体性质研究

合成了两个侧链含有2,2,6,6-四甲基哌啶-1-氧自由基单元(TEMPO)的1,4-吡咯并吡咯二酮(DPP)共轭聚合物PDPP4T-1和PDPP4T-2,并开展了其半导体性质研究。薄膜场效应晶体管器件测试结果显示,相对于不含TEMPO的聚合物PDPP4T,PDPP4T-1和PDPP4T-2的场效应器件性能有所降低,不过,含TEMPO的聚合物器件性能最高仍达到了2.12cm²·V^-1·s^-1。进一步通过原子力显微镜和X射线衍射对TEMPO引入后导致性能降低的可能原因进行了研究。     

电极材料对NPB/Alq3有机电致发光器件性能的影响

采用不同材料作为有机电致发光器件(OELDs)的电极, 制备了基本结构为[阳极/NPB(40 nm)]/Alq3(50 nm)/阴极]的异质结双层器件, 并通过改变OELDs器件的阴极或阳极来研究电极材料对器件光电性能的影响. 研究结果表明, 各器件电流-电压(I-V)关系的基本特征与陷阱电荷限制电流(TCLC)机制的拟合情况相符. 由于有机材料本身能级的无序性以及载流子迁移率对温度和电场的依赖性, 不同电极的载流子注入能力与其功函数并无直接关系. 双层器件中由于空穴传输层的引入, 使得载流子复合区域位于有机层异质结界面处, 降低了金属阴极对激子的猝灭作用, 从而大大提高了器件性能. 此外, 金属电极OLEDs器件结构具有的微腔效应会导致发射光谱的位移和谱峰宽度变窄, 这表明通过对金属电极的表面改性和优化可使器件性能超过常规结构的器件.     

C_(60)与MoO_3混合材料做空穴注入层的单层有机电致发光器件

我们制备研究了基于结构为氧化铟锡(ITO)/C_(60)(1.2nm):MoO_3(0.4nm)/1,3,5-三(1-苯基-1H-苯并咪唑-2-基)苯(TPBi):三(2-苯基吡啶)铱[Ir(ppy)_3](33%,90 nm)/LiF (0.7 nm)/Al (120 nm)的高效绿色磷光单层有机发光二极管(OLED)。分别将C_(60),MoO_3与C_(60):MoO_3混合物作为空穴注入层(HIL)作为对比。TPBi在发光层中起着主体以及电子传输材料的双重作用。在使用电子传输型主体的单层OLED中,空穴注入层性质对于调节电子/空穴注入以获得电荷载流子传输平衡起重要作用。因此,适当调节空穴注入层是实现高效单层OLED的关键因素。由于MoO_3较大的电子亲和能(6.37 eV)会诱导电子从C_(60)的最高占据分子轨道(HOMO)能级转移至MoO_3,从而形成C_(60)阳离子,并使得Mo元素的价态从+6降至+5,C_(60):MoO_3混合就可以较好的调节空穴注入性质。最终实现最大电流效率为35.88 cd·A~(-1)的单层有机发光器件。     

有机化学实验混合教学模式的设计与实践

通过介绍混合教学模式在有机化学实验课程教学中的设计、实施情况及效果评价与反馈等内容,与大家分享混合教学模式在有机化学实验课程教学中的应用经验与思考。     

混合离子液体对聚甲基丙烯酸甲酯分子链缠结及松弛行为的影响

首先通过两步法合成了具有双咪唑环阳离子结构的离子液体(DIL),并将其与单咪唑环离子液体(MIL)进行混合以调控黏度变化,混合离子液体(ILs)的黏度符合对数混合规则且随温度变化呈现Arrhenius型流体行为.进一步通过动态流变、示差扫描量热(DSC)、电化学测试等方法研究了混合离子液体中DIL比例对聚甲基丙烯酸甲酯(PMMA)链缠结和松弛行为的影响,并讨论了PMMA/ILs体系热稳定性、玻璃化转变及离子电导率等的变化.结果表明,DIL独特的双咪唑环结构可与PMMA分子形成更多相互作用位点,从而导致凝聚缠结的形成,很大程度上限制了PMMA分子链的运动和松弛.随DIL含量增加,PMMA/ILs体系的松弛时间、热分解温度、玻璃化转变温度等参数均呈增大趋势,但其离子电导率有所损失,这与DIL较大的分子尺寸和运动能力有关.     

有机涂层失效过程的电化学阻抗和电位分布响应特征

结合使用电化学阻抗谱(EIS)和扫描Kelvin探针(SKP)技术研究了在质量分数为3.5%的NaCl溶液中的铁基有机涂层劣化过程特征. 结果表明, 根据EIS和SKP的响应特征, 可将涂层劣化过程分为3个主要阶段: (Ⅰ) 涂层渗水阶段. 此时, 涂层渗水阶段的EIS阻抗持续减小, 但保持单容抗弧特征, SKP特征是电位持续降低, 但分布保持均匀; (Ⅱ) 基底金属腐蚀发生阶段. 此时, EIS阻抗快速下降, 并产生第二时间常数; SKP特征为表面电位差增大; (Ⅲ) 基底金属腐蚀发展与涂层失效阶段. 此时, EIS出现扩散尾, SKP电位差保持较大数值. 实验结果表明, 在研究有机涂层劣化过程中, EIS和SKP的结合使用能够互相补充完善, 获得涂层劣化过程中更为准确\, 可靠的变化信息.     

金属纳米粒子增强有机光电器件性能研究进展

金属纳米粒子以其特殊的体积效应、量子尺寸效应、表面效应和宏观量子隧道效应提供了诸多优异的光学和电学性能.实验表明,利用金属纳米粒子的光学和电学效应可以有效提升有机光电器件的综合性能.目前在有机发光二极管器件中流明效率最好的增强效果为150%,在有机光伏器件中功率转换效率最好的增强效果为70%,特别是在一些高效有机光电器件中的成功应用,虽然增强的比例相对较低,但是器件效率基数大,最终得到的器件性能相当优异.这些性能提升的主要机理包括表面增强荧光、等离激元光捕获、能量转移、电学效应、散射效应等.本文以金属纳米粒子的表面等离子体共振效应和电学效应为主线,按照不同纳米粒子及器件中的修饰位置进行分类,系统总结了金属纳米粒子提高有机发光二极管器件和有机光伏器件性能方面的工作.针对纳米粒子的局域表面等离子共振效应作用范围小,增强波长单一等问题,总结了一些新的设计思路如远场增强效应、纳米粒子和激子剖面的调控与匹配及散射增强效应等,希望为进一步的结构设计提供帮助.     

Electronic Structure Effect of Polythiophene Derivatives and Nano N-Zn-Ag/TiO2 on Performance of Organic Thin Film Solar Cell

Nanocrystal N-Zn-Ag/TiO₂ powders were prepared with N-Zn/TiO₂ by photo deposition method. A series of pure polymers P3HT[poly(3-hexylthiophene)], P3OT[poly(3-octylthiophene)], P3DT[poly(3-decylthiophene)] and P3DDT[poly(3-dodecylthiophene)], was synthesized, which were used to synthesize p-n type semiconductor materials P3HT/N-Zn-Ag-TiO₂, P3OT/N-Zn-Ag-TiO₂, P3DT/N-Zn-Ag-TiO₂ and P3DDT/N-Zn-Ag-TiO₂ by in situ che-mical method. X-Ray diffraction(XRD) and infrared(IR) spectroscopy showed the structure of the polymers and complexes. Ultraviolet-visible(UV-Vis) spectra and cyclic voltammograms(CV) showed the optical and electronic performance of the polymers and complexes. Two new single and double organic thin film heterojunction solar cells were prepared with the above mentioned synthesized powders as raw materials. Current-voltage(I-V) measurements indicate that the conversion efficiency of the single organic thin film heterojunction solar cell is higher than that of the double organic thin film heterojunction solar cells. Single organic thin film heterojunction solar cells based on P3DT/N-Zn-Ag-TiO₂ can get a photoelectric conversion efficiency of 0.0408%. The performance of electronic transform between electron donor and acceptor on organic thin film solar cells was researched.     

Influence of Buckminsterfullerene Doping on Properties of Phosphorescent Homojunction Organic Light-Emitting Device

By p-doping buckminsterfullerene (C60) into a bipolar host 2,7-bis(diphenylphos-phorryl)-9-[4-(N,N-dipheny-lamino)phenyl]-9-phenylfluorene, the device efficiency of the phosphorescent homojunction organic light-emitting device (HJOLED) was pronouncedly enhanced. A two-fold enhancement in luminous efficacy compared with nondoped or MoO₃ doped HJOLEDs was observed by employing C60 as the p-dopant. The influence of C60 doping on the device performances of this HJOLED was investigated by carefully analyzing the J-V-L characteristics of HJOLEDs with different hole transporting layer. A white HJOLED was also successfully fabricated. The maximum brightness, current efficiency and power efficiency were 22700 cd m^?2, 12.2 cd A^?1 and 7.7 lm W, respectively. This device showed a warm EL spectra and the CIE coordinates was (0.41, 0.44) @ 10 V. Besides, this device manifested lower efficiency roll-off.