二氧化碳在金属-有机骨架材料中吸附的阶梯现象

采用巨正则系综蒙特卡罗(GCMC)模拟方法, 对二氧化碳在5种具有相同拓扑结构的金属-有机骨架材料(IRMOFs), 即IRMOF-1, -8, -10, -14, -16中吸附产生的阶梯现象进行了详细的研究. 结果表明: 低温条件下, 孔径越大的IRMOFs越容易发生阶梯现象; 发生阶梯现象的转变压力与能够发生阶梯现象的转变温度都与孔径呈线性关系. 此外, 模拟结果进一步验证了二氧化碳分子之间的静电作用力是阶梯现象发生的关键因素. 这些规律将为金属-有机骨架材料(MOFs)的设计和改性以及二氧化碳在混合气体中的吸附分离提供有用的信息.     

Covalent Organic Framework Materials for Photo/ Electrocatalytic Carbon Dioxide Reduction北大核心CSCD

Covalent organic frameworks （COFs）are a class of emerging materials connected by covalent bonds,which have high thermal/chemical stability （except boric acid COFs）,permanent porosity,large specific surface area and good crystallinity. In addition,the structure of the monomer unit in COFs is adjustable and can coordinate with many transition metal ions to provide catalytic active sites. These advantages make COFs helpful to catalyze various reactions. Among them,COFs have an excellent catalytic effect on the CO2 reduction reaction（CO2 RR）. This is mainly because the adjustable pore structure of COFs allows them to adsorb a large amount of CO2 and the π-π stacking structure in COFs can promote charge transfer, which can greatly improve the efficiency of CO2 reduction. COFs can be used as photo/ electrocatalysts to efficiently reduce CO2 to CO,CH4 ,HCOOH and other products. This review discusses the important achievements of CO2 RR catalyzed by COFs, including photo/electrocatalytic CO2 RR and photoelectric coupling CO2 RR. In addition,the future development of COFs as CO2 RR catalysts is also prospected. © 2022, Science Press (China). All rights reserved.     

一体化电极电催化二氧化碳还原研究进展

电催化二氧化碳还原反应(E-CO₂RR)可在温和条件下将CO₂转化成高附加值燃料或化学品,近年来受到广泛关注,其在实际反应中涉及到气体扩散和多电子转移等复杂过程,构筑高效、稳定的催化电极是其发展的核心之一。然而,传统涂敷电极制备时,需要将催化剂与粘结剂混合涂覆于集流体表面,此过程会造成活性位点包埋和传质过程受限,致使催化剂活性位利用率下降,同时在反应过程中电极表面容易粉化,造成稳定性下降,难以重复利用。因此,如何调控电极反应界面,提升催化剂活性位的利用率仍面临挑战。将催化剂原位生长于集流体上得到的一体化电极可直接应用于电催化反应,不仅有利于提升活性位利用率以及电荷传输能力,还能有效调控三相界面处的微观反应环境(如pH、反应物及反应中间体的浓度等),从而实现电催化性能强化。本文综述了一体化电极用于E-CO₂RR的最新进展,分析了结构和表界面调控对E-CO₂RR性能的影响规律,并对该领域仍然存在的挑战和未来一体化E-CO₂RR电极的发展进行了评述与展望。     

A Layer-Structured Metal-Organic Framework-Derived Mesoporous Carbon for Efficient Oxygen Reduction Reaction

Developing highly active and durable electrocatalysts for the oxygen reduction reaction (ORR) is crucial to large-scale commercialization of fuel cells and metal-air batteries. Here we report a facile approach for the synthesis of nitrogen and oxygen dual-doped mesoporous layer-structured carbon electrocatalyst embedded with graphitic carbon coated cobalt nanoparticles by direct pyrolysis of a layer-structured metal-organic framework. The electrocatalyst prepared at 800℃ exhibits comparable ORR performance to Pt/C catalysts but possesses superior stability to Pt/C catalysts. This synthetic approach provides new prospects in developing sustainable carbon-based electrocatalysts for electrochemical energy conversion devices.     

An Overview of Metal-Organic Framework Based Electrocatalysts: Design and Synthesis for Electrochemical Hydrogen Evolution,Oxygen Evolution,and Carbon Dioxide Reduction Reactions

Due to the increasing global energy demands, scarce fossil fuel supplies, and environmental issues, the pursued goals of energy technologies are being sustainable, more efficient, accessible, and produce near zero greenhouse gas emissions. Electrochemical water splitting is considered as a highly viable and eco-friendly energy technology. Further, electrochemical carbon dioxide (CO₂) reduction reaction (CO₂RR) is a cleaner strategy for CO₂ utilization and conversion to stable energy (fuels). One of the critical issues in these cleaner technologies is the development of efficient and economical electrocatalyst. Among various materials, metal-organic frameworks (MOFs) are becoming increasingly popular because of their structural tunability, such as pre- and post- synthetic modifications, flexibility in ligand design and its functional groups, and incorporation of different metal nodes, that allows for the design of suitable MOFs with desired quality required for each process. In this review, the design of MOF was discussed for specific process together with different synthetic methods and their effects on the MOF properties. The MOFs as electrocatalysts were highlighted with their performances from the aspects of hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and electrochemical CO₂RR. Finally, the challenges and opportunities in this field are discussed.     

Two-dimensional Metal-Organic Frameworks and Derivatives for Electrocatalysis

The most important topics in the world today are environmental and resource issues. The development of green and clean energy is still one of the great challenges of social sustainable development. Two-dimensional(2D) metal-organic frameworks(MOFs) and derivatives have exceptional potential as high-efficiency electrocatalysts for clean energy technologies. This review summarizes various synthesis strategies and applications of 2D MOFs and derivatives in electrocatalysis. Firstly, we will outline the advantages and uniqueness of 2D MOFs and derivatives, as well as their applicable areas. Secondly, the synthetic strategies of 2D MOFs and derivatives are briefly classified. Each category is summarized and we list classic representative fabrication methods, including specific fabrication methods and mechanisms, corresponding structural characteristics, and insights into the advantages and limitations of the synthesis method. Thirdly, we separately classify and summarize the application of 2D MOFs and derivatives in electrocatalysis, including electrocatalytic water splitting, oxygen reduction reaction(ORR), CO₂ reduction reaction(CO₂RR), and other electrocatalytic applications. Finally, the development prospects and existing challenges to 2D MOFs and derivatives are discussed.     

功能化金属有机框架材料催化二氧化碳转化研究进展

作为主要温室气体,二氧化碳(CO2)导致了全球变暖与海洋酸化,同时CO2也是重要的C1资源.在温和条件下,利用催化剂将CO2高效、高选择性地转化为具有高附加值的化学品,对缓解CO2给气候变化带来的负面影响和减少对化石能源的依赖具有重要意义.作为一类新兴的多孔晶态材料,金属-有机框架(metal-organic fram...     

Recent Progress on Bismuth-based Nanomaterials for Electrocatalytic Carbon Dioxide Reduction

Due to the burning of fossil fuels, the level of carbon dioxide(CO₂) in the atmosphere gradually rises, leading to serious greenhouse effect and environmental problems. Electrocatalytic reduction of CO₂ is currently an efficient way to convert CO₂ to value-added products. Bismuth(Bi)-based nanomaterials have raised great interests due to their excellent activity and high selectivity to electrocatalytic CO₂ reduction. In this review, the fundamental principles of electrochemical CO₂ reduction reaction(CO₂RR) are introduced at first. Moreover, the recent development of Bi-based electrocatalytic materials including Bi with various nanostructures(nanoparticle, nanosheet, etc.), Bi-based compounds(Bi oxide, bimetal chalcogenide, etc.), and Bi/C nanocomposites are summarized. In the end, the future prospects and challenges of electrocatalysts for CO₂ reduction are discussed.     

CO2电化学还原研究进展

综述了利用电化学方法研究CO2在水溶剂，非水溶剂中的转化情况和机理，以及将CO2固定在有机络合物中或用光电化学，光催化还原CO2及仿光合作用转移CO2的最新研究情况，旨在寻求一种合理，高效的CO2转化方法以缓解温室效应。     

二氧化碳电化学还原的研究进展

利用低品阶的可再生电能,将二氧化碳(CO_2)电化学还原生成高附加值的化学品或燃料,既可以变废为宝、减少CO_2排放,又能将可再生能源转变为高能量密度的燃料储存,具有重要的现实意义。电化学还原CO_2的研究,是目前世界范围内的研究热点,许多标志性的重要研究成果不断涌现。本文首先简要介绍了CO_2电化学还原的基本原理,然后概述了近5年来在其电催化剂材料和反应机理相关的实验与理论研究方面的昀新研究进展,昀后对其发展趋势进行了展望。     

Metal-Organic Frameworks Derived Ag-CoSO4 Nanohybrids as Efficient Electrocatalyst for Oxygen Evolution Reaction

Cobalt-based nanomaterials have been intensively explored as one of the most promising noble-metal-free oxygen evolution reaction (OER) electrocatalysts. However, most of their performances are still inferior to state-of-the-art precious metals especially for Ru and Ir. Herein, we apply a continuous ion exchange method and further hydrothermal treatment to synthesize the flake-like Ag-CoSObegin{document}$_4$end{document} nanohybrids beginning from Co-BTC (BTC: benzene-1, 3, 5-tricarboxylic acid) metal-organic frameworks precursor. The catalyst exhibits superior OER performance under the alkaline electrolyte solution (a low overpotential of 282 mV at 10 mA/cmbegin{document}$^{2}$end{document} in 1 mol/L KOH), which is even better than RuObegin{document}$_2$end{document} due to the improved conductivity and rapid electrons transfer process via introducing small amount of Ag. The existence of Ag in the hybrids is beneficial for increasing the Co(Ⅳ) concentration, thus promoting the begin{document}$^*$end{document}OOH intermediate formation process. Besides, due to the very low requirement of Ag content (lower than 1 atom%), the cost of the catalyst is also limited. This work provides a new insight for designing of inexpensive OER catalysts with high performance and low cost.     

导电金属有机框架材料在电催化中的成就，挑战和机遇

To fulfill the demands of green and sustainable energy, the production of novel catalysts for different energy conversion processes is critical. Owing to the intriguing advantages of the intrinsic active species, tunable crystal structure, remarkable chemical and physical properties, and good stability, metal-organic frameworks (MOFs) have been extensively investigated in various electrochemical energy conversions, such as the CO₂ reduction reaction, N₂ reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, and oxygen reduction reaction. More importantly, it is feasible to change the chemical environments, pore sizes, and porosity of MOFs, which will theoretically facilitate the diffusion of reactants across the open porous networks, thereby improving the electrocatalytic performance. However, owing to the high energy barriers of charge transfer and limited free charge carriers, most MOFs show poor electrical conductivity, thus limiting their diverse applications. As reported previously, MOFs were used as a porous substrate to confine the growth of nanoparticles or co-doped electrocatalysts after annealing. The conductive MOFs can combine the advantages of conventional MOFs with electronic conductivity, which significantly enhance the electrocatalytic performance. In addition, conductive MOFs can achieve conductivity via electronic or ionic routes without post-annealing treatment, thereby extending their potential applications. Different synthesis strategies have recently been developed to endow MOFs with electrical conductivity, such as post-synthesis modification, guest molecule introduction, and composite formatting. The performance of conductive MOFs can even outperform those of commercial RuO₂ catalysts or Pt-group catalysts. However, it is difficult to endow most MOFs with high conductivity. This review summarizes the mechanisms of constructing conductive MOFs, such as redox hopping, through-bond pathways, through-space pathways, extended conjugation, and guest-promoted transport. Synthetic methods, including hydro/solvothermal synthesis and interface-assisted synthesis, are introduced. Recent advances in the use of conductive MOFs as heterogeneous catalysts in electrocatalysis have been comprehensively elucidated. It has been reported that conductive MOFs can demonstrate considerable catalytic activity, selectivity, and stability in different electrochemical reactions, revealing the immense potential for future displacement of Pt-group catalysts. Finally, the challenges and opportunities of conductive MOFs in electrocatalysis are discussed. Based on systematic synthesis strategies, more conductive MOFs can be constructed for electrocatalytic reactions. In addition, the morphology and structure of conductive MOFs, which can change the electrochemical accessibility between substrates and MOFs, are also crucial for catalysis, and thus, they should be extensively studied in the future. It is believed that a breakthrough for high-performance conductive MOF-based electrocatalysts could be achieved.     

Two-dimensional Metal-Organic Frameworks as Electrocatalysts for Oxygen Evolution Reaction

Oxygen evolution reaction(OER) plays an important role in many electrochemical systems. However, its sluggish kinetics severely limits the development of next-generation energy technologies. Recently, two-dimensional(2D) metal-organic frameworks(MOFs) have attracted much attention as a class of promising electrocatalysts. Their diverse components and tunable structures provide a new platform to design and explore ideal electrocatalysts. The ultrathin characteristics including high specific surface area, abundant exposed metal sites and fast electronic transfer further promote the electrocatalytic performance of 2D MOFs. Therefore, many attempts have been made in synthesizing 2D MOF-based electrocatalysts in recent years. This review focuses on the strategies to fabricate 2D MOFs with high electrocatalytic performances for OER. The discussion on challenge and development of their electrocatalytic application is also presented.     

Metal-Organic Framework Composites and Their Derivatives as Efficient Electrodes for Energy Storage Applications: Recent Progress and Future Perspectives

Metal-organic frameworks (MOFs) have been important electrochemical energy storage (EES) materials because of their rich species, large specific surface area, high porosity and rich active sites. Nevertheless, the poor conductivity, low mechanical and electrochemical stability of pristine MOFs have hindered their further applications. Although single component MOF derivatives have higher conductivity, self-aggregation often occurs during preparation. Composite design can overcome the shortcomings of MOFs and derivatives and create synergistic effects, resulting in improved electrochemical properties for EES. In this review, recent applications of MOF composites and derivatives as electrodes in different types of batteries and supercapacitors are critically discussed. The advantages, challenges, and future perspectives of MOF composites and derivatives have been given. This review may guide the development of high-performance MOF composites and derivatives in the field of EES.     

光电催化二氧化碳还原研究进展

CO_2是最常见的化合物,作为潜在的碳一资源,可用于制备多种高附加值的化学品,如一氧化碳、甲烷、甲醇、甲酸等。传统的热催化转化CO_2方法能耗高,反应条件苛刻。因此,如何在温和条件下高效地将CO_2转化成高附加值的化学品,一直以来是催化领域的研究热点和难点之一。光催化技术反应条件温和、绿色环保。然而,纯光催化反应普遍存在太阳能利用效率有限,光生载流子分离效率低等问题。针对上述问题,在光催化的基础上引入电催化,可以提高载流子的分离效率,在较低的过电位下,实现多电子、质子向CO_2转移,从而提高催化反应效率。总之,光电催化技术可以结合光催化和电催化的优势,提高CO_2催化还原反应效率,为清洁、绿色利用CO_2提供了一种新方法。本文依据光电催化CO_2还原反应基本过程,从光吸收、载流子分离和界面反应等三个角度综述了光电催化反应的基本强化策略,并对未来可能的研究方向进行了展望。     

Artificial and Semi-artificial Photosynthesis (AP and SAP) Systems Based on Metal-Organic Frameworks

Recently, artificial and semi-artificial photosynthesis have attracted extensive attentions in addressing the crisis of energy from fossil fuels and reducing excessive CO₂ emission. Metal-organic frameworks (MOFs) have been considered as ideal platforms for constructing artificial photosynthesis systems due to their unique properties like large specific surface area, high porosity and diverse framework topology, and tunable functionalities. This review discussed the characteristics, superiorities and challenges of MOF-based photocatalysts, and detailed summarization of several common design strategies for MOF-based artificial systems, including i) enhancement of light absorption, ii) acceleration of the charge separation and transfer, and iii) introduction of additional active units. Particularly, we give examples showing the applications of MOF-based photocatalysts, where the mechanisms of superior photocatalytic activity and selectivity are also analyzed, thereby providing theoretical guidance for rational design of MOF-based photocatalysts. Finally, the challenges and future research directions of MOF-based photocatalysts are prospected.     

石墨烯量子点/铁基金属-有机骨架复合材料高效光催化二氧化碳还原※

利用可见光将二氧化碳光还原为有用的化学品是一项有前景但充满挑战的工作. 金属有机骨架(MOFs)作为一种新兴的具高孔隙率、高比表面积、强吸附富集CO₂能力、结构和功能可调的多孔材料, 在光催化二氧化碳还原反应中具有极强的应用潜力. 但大多数金属有机骨架材料存在可见光吸收范围窄、光生载流子快速复合等问题, 导致催化二氧化碳还原活性仍然较低. 通过静电自组装策略将纳米级胺基化金属有机骨架材料(NH₂-MIL-88B(Fe))和羧酸化石墨烯量子点(GQD)通过静电作用结合, 得到GQD/NH₂-MIL-88B(Fe)复合材料. 该复合催化剂有效结合了金属有机骨架强二氧化碳吸附富集能力和GQD的可见光吸收范围宽、电子传导能力强等优点, 因此与纯金属有机骨架材料NH₂- MIL-88B(Fe)相比较, 该复合材料能高效光催化还原CO₂为CO, 并在10 h可见光下活性高达590 μmol/g, 约为NH₂-MIL-88B(Fe)活性的四倍. 这项工作为制备高活性催化CO₂的金属有机骨架复合材料提供了借鉴.     

Oxygenates from the Electrochemical Reduction of Carbon Dioxide

Electrochemical reduction of carbon dioxide (CO₂) driven by renewable electricity to give chemicals and fuels is considered an ideal approach that can alleviate both carbon emission and energy tension stress. High‐value chemicals such as oxygenates can be effectively produced from the electroreduction of CO₂, and this is highly attractive to promote the economy and applicability of CO₂ utilization. This review focuses on recent advancements in the electrochemical reduction of CO₂ to formic acid, methanol, ethanol, acetic acid, and other oxygenates. The principles of the process, influencing factors, and typical catalysts are summarized. On the basis of the aforementioned discussions, we present future prospects for further development of the electroreduction of CO₂ to oxygenates.     

Electrochemical Reduction of Carbon Dioxide to 1-Butanol on Oxide-Derived Copper

The electroreduction of carbon dioxide using renewable electricity is an appealing strategy for the sustainable synthesis of chemicals and fuels. Extensive research has focused on the production of ethylene, ethanol and n-propanol, but more complex C₄ molecules have been scarcely reported. Herein, we report the first direct electroreduction of CO₂ to 1-butanol in alkaline electrolyte on Cu gas diffusion electrodes (Faradaic efficiency=0.056 %, j_1-Butanol=−0.080 mA cm⁻² at −0.48 V vs. RHE) and elucidate its formation mechanism. Electrolysis of possible molecular intermediates, coupled with density functional theory, led us to propose that CO₂ first electroreduces to acetaldehyde-a key C₂ intermediate to 1-butanol. Acetaldehyde then undergoes a base-catalyzed aldol condensation to give crotonaldehyde via electrochemical promotion by the catalyst surface. Crotonaldehyde is subsequently electroreduced to butanal, and then to 1-butanol. In a broad context, our results point to the relevance of coupling chemical and electrochemical processes for the synthesis of higher molecular weight products from CO₂.     

基于金属有机框架衍生的Fe-N-C纳米复合材料作为高效的氧还原催化剂

Environmentally friendly and renewable energy technologies, such as fuel cells and metal-air batteries, hold great promise for solving current energy and environmental challenges. The oxygen reduction reaction (ORR) plays a pivotal role in this top-drawer question. However, the sluggish kinetics of the ORR and prohibitive costs limit the global scalability of such devices. Traditionally, platinum-based electrocatalysts exhibit the best performance for ORRs in both acid and alkaline electrolytes. However, to significantly reduce the cost and realize sustainable development, utilization of Pt must be replaced or significantly reduced in the ORR cathode for fuel cell applications. Therefore, developing earth-abundant and high-performance non-precious metal catalysts (NPMCs) for ORR is of critical importance for the commercialization of fuel cells. In comparison to traditional catalysts, metal-organic frameworks (MOFs) are ideal precursors that integrate metal, nitrogen, and carbon functionalities together into one ordered 3D crystal structure. MOFs, assembled by secondary building of units comprised of metals and organic linkers with strong bonding, have received significant research attention because they possess permanent porosity, a three-dimensional (3D) structure, and can be prepared using a diversity of metals and organic linkers. High surface area, and microporous carbon materials can be easily obtained by carbonization of MOFs at high temperatures. In particular, MOF-derived carbon nanocomposites, which were prepared from transition metals, and have the form M-N-C (M = Fe or Co), have demonstrated remarkably improved catalytic activity and stability. Herein, we report an NPMC material consisting of Fe₃C nanoparticles encapsulated in mesoporous N-doped carbon (Fe-N-C), synthesized by a simple strategy involving physical mixing of MIL-100(Fe) with glucose and urea, and subsequent pyrolysis under inert atmosphere. The strong interaction between metal atoms and nitrogen atoms is beneficial in generating more active sites, and sites with a higher intrinsic catalytic activity, via carbonization. The as-obtained catalysts exhibit remarkable ORR activity in alkaline media, with the best catalyst (Fe-N-C-900, which is synthesized at 900 ℃) featuring a more positive onset potential (0.96 V vs the reversible hydrogen electrode (RHE)), a more positive half-wave potential (0.83 V vs RHE), a much higher diffusion limiting current density (6.28 mA·cm^-2) and a larger electron-transfer number (n), even at low overpotentials, compared with other contrast materials. Fe-N-C-900's excellent catalytic activity and stability in ORR are due to its large BET surface area, its large total pore volume, its nitrogen dopants, its active Fe₃C nanoparticles and the cooperative effects among its reactive functionalities.