Electrochemical synthesis and characterization of polydiphenylamine

Electrochemical oxidation of diphenylamine(DPA)in acetonitrile solution producedan adhesive conducting polydiphenylamine(PDPA)film on the electrode,which exhibited multiplecolour variation in a wide range of potential.The polymer was characterized by cyclic voltam-merry,FTIR and ESR.The results indicate that the electropolymerization of diphenylamine per-forms via the 4,4＇C—C phenyl-phenyl coupling mechanism.FTIR,ESR and conductivity mea-surements for the different states of PDPA show that polydiphenylamine can be reversibly dopedand dedoped either chemically or electrochemically.It is evidenced also that there are paramagneticspecies—polarons in PDPA supposed to be the current carrier.     

Laccase-mediated oxidation of the steroid hormone 17β-estradiol in organic solvents

Laccase-mediated oxidation of the steroid hormone 17β-estradiol 1 in organic solvents or in a biphasic system allowed the isolation of the C–C and C–O dimers 1a–d. Concerning the C–C dimers, the relative ratio of the symmetric 4-4′ 1c and asymmetric 4-2′ 1d products was influenced by the catalyst used. Both 1c and 1d were formed as an equimolar mixture of diastereomeric atropisomers.     

Reaction of α,β-unsaturated trifluoromethyl ketones with cyclic enamines

The reactions of ,-unsaturated trifluoromethyl ketones containing aromatic and heteroaromatic substituents with 1-morpholinocyclopentene, 1-morpholinocyclohexene, and 1-methyl-4-morpholino-1,2,5,6-tetrahydropyridine were studied. The reactions proceeded stereospecifically to give the corresponding bicyclo[3.2.1]octane, bicyclo[3.3.1]nonane, and azabicyclo[3.3.1]nonane derivatives.     

Label-free aptamer-based electrochemical impedance biosensor for 17β-estradiol

A novel aptamer-based label-free electrochemical impedance spectroscopy biosensor for 17β-estradiol has been fabricated. The aptamers were firstly immobilized on the gold electrode through Au-S interaction; the aptamer probe was then bound with the addition of 17β-estradiol to form the estradiol/aptamer complex on the electrode surface. This leads to a significantly larger interfacial electron transfer resistance than that without the addition of 17β-estradiol. The change in the resistance had a linear relationship with 17β-estradiol concentration in the range of 1.0 × 10(-8) to 1.0 × 10(-11) mol L(-1), with a detection limit of 2.0 × 10(-12) mol L(-1). The biosensor showed high selectivity to 17β-estradiol and good stability. The designed biosensor has been applied to detect 17β-estradiol in human urine with satisfactory results.     

SPE and HPLC monitoring of 17-β-estradiol in Egyptian aquatic ecosysetms

Solid-phase extraction and HPLC methods are described for monitoring of 17-β-estradiol residues in Egyptian aquatic ecosystems (water, fish, mollusks, sediment, and drinking water) at the Nile River, Suez Canal region, and northeast of Egypt. Molecular imprinted polymer was prepared and used in extraction. High performance liquid chromatography (HPLC) columns used were Supelcosil C₁₈ and Nucleosil C₁₈. The mobile phases used were different combinations of water and acetonitrile. The concentration of 17-β-estradiol in water, aquatic animals, and sediment samples were of 265.13–7988.12 µg/L, 0.503–96.167, and 0.775–11.884 µg/kg, respectively. Marine lake was contained with high levels of 17-β-estradiol (P < 0.05). Similarly, the Nile River downstream showed high levels of 17-β-estradiol. The detected concentrations in mollusks were significantly higher than those detected in fish. Tilapia fish did not show 17-β-estradiol. Contrarily, low concentrations were detected in the rivulet streams supplied by the Nile River. Besides, 17-β-estradiol was also detected in the sediments at low levels. Detection of 17-β-estradiol in the Egyptian ecosystems attracted attention toward heavy reliance on some esterogenic medicinal products in Egypt. The monitoring of 17-β-estradiol in other water bodies was recommended. Besides, the development of methodologies of bioremediation to eliminate 17-β-estradiol from the Egyptian and other water resources of the world was also suggested.     

Solvent effects on the steady state photophysics of estrone and 17β-estradiol

Absorption and emission yields for estrone and 17β-estradiol were measured in a variety of room temperature solvents. Molar extinction coefficients were found to not vary as a function of solvent, while fluorescence yields were found to be significantly affected by the polarity and hydrogen-bond accepting ability of the solvent, with the yield for 17β-estradiol being highest in nonpolar, hydrogen-bond donating solvents, and lowest in the nonpolar, hydrogen-bond accepting solvent ethyl acetate. Estrone's emission yield was found to be a factor of ten smaller than 17β-estradiol's. Strong solvent and excitation wavelength dependences were found for the relative amounts of emission between estrone's two emission bands, with increased relative emission occurring in nonpolar aprotic solvents, and under higher excitation energies. These results are interpreted with the aid of vertical excitation energies from time-dependent density functional calculations using both explicit and implicit solvation models.     

Preparation and characterization of inclusion complexes of carvedilol with methyl-β-cyclodextrin

Aim of the present work was to investigate the effect of methyl-β-cyclodextrin (MβCD) on the solubility and dissolution rate of carvedilol (CAR), a drug used orally for the treatment of hypertension. Phase solubility studies showed an A_L-type diagram indicating the formation of inclusion complex in 1:1 molar ratio. Solid binary systems of the drug with MβCD were prepared by various methods. Physicochemical characterizations were performed using Fourier Transformation Infrared Spectroscopy, Differential Scanning Calorimetry and powder X-Ray Diffractometry. It could be concluded that CAR can form inclusion complex with MβCD. The dissolution profiles of inclusion complexes were determined and compared with those of CAR alone and the physical mixture. The dissolution rate of CAR was increased by MβCD inclusion complexation remarkably.     

Theory and application of cyclic voltammetry for measurement of fast electrode kinetics at microdisk electrode

An analytical expression describing voltammetric behaviors responses at microdisk electrode for various diffusion conditions and degrees of reversibility is reported in this paper. Results of theoretical calculation made it possible to use cyclic voltammetry to evaluate heterogeneous rate constants under intermediate diffusion conditions. At relatively low scan rate, the distortion of current-voltage can be reduced due to small iR drops and charging current. The effects of transfer coefficient, a, kinetic parameter, (=k0r/4D), and switching potential, s, on potential peak separation are discussed in detail. The relationship obtained in this paper between potential peak separation and \ is in good agreement with that in Ref. 14, whose authors have got their results by using digital simulation technique. After the experiment of Fe(CN)64- oxidation, k0 and a were obtained by the theory of this paper. The result agrees with that in Ref. 19.     

Molecularly imprinted solid-phase extraction for the selective determination of 17β-estradiol in fishery samples with high performance liquid chromatography

A molecularly imprinted polymer (MIP) has been synthesized by a thermo-polymerization method using methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EGDMA) as cross-linker, acetonitrile as porogenic solvent, and 17β-estradiol as template. The MIP showed obvious affinity for 17β-estradiol in acetonitrile solution, which was confirmed by absorption experiments. After optimization of molecularly imprinted solid-phase extraction (MISPE) conditions, three structurally related estrogenic compounds (17β-estradiol, estriol, and diethylstilbestrol) were used to evaluate the selectivity of the MIP cartridges. The MIP cartridges exhibited highly selectivity for E₂, the recoveries were 84.8 ± 6.53% for MIPs and 19.1 ± 1.93% for non-imprinted polymer (NIP) cartridges. The detection and quantification limits correspond to 0.023 and 0.076 mg L⁻¹. Furthermore, the MISPE methods were used to selectively extract E₂ from fish and prawn tissue prior to HPLC analysis. This MISPE-HPLC procedure could eliminate all matrix interference simultaneously and had good recoveries (78.3-84.5%).     

Preparation and characterization of hydroxypropyl-β-cyclodextrin inclusion complex of eugenol: differential pulse voltammetry and (1)H-NMR

The objective of present investigation was to improve the solubility of Eugenol by preparing the inclusion complex of Eugenol with hydroxypropyl-β-cyclodextrin (Hp-β-CD) and characterize the prepared complex by using NMR and differential pulse voltammetry (DPV). Phase solubility curve was plotted using Hp-β-CD in ranging from 0-40 mM of Hp-β-CD and found to be linear. Therefore, inclusion complex was prepared in equimolar ratio of Eugenol and Hp-β-CD by lyophilization method. Fourier transform infrared spectroscopy (FT-IR), (1)H-NMR and DPV were performed for Eugenol, Hp-β-CD and prepared inclusion complex of Eugenol. 2D (two dimensional) NMR was also performed for prepared inclusion complex. The proton of phenol moiety of Eugenol experienced a pronounced chemical shift variation in (1)H-NMR. The positive sign of the variation for proton in (1)H-NMR indicated that the proton was located near to an oxygen atom in the Hp-β-CD cavity and its magnitude showed a strong interaction between -OH proton of Eugenol and Hp-β-CD. 2D NMR confirms the interaction between phenolic group and hydrogen atoms of Hp-β-CD. A well defined anodic peak current corresponding to oxidation of Eugenol in non-encapsulated and Hp-β-CD-Eugenol inclusion complex in phosphate buffer (pH 6.8) was obtained at about 0.35 V and 0.40 V, respectively. The positive shift in oxidation potential indicated the formation of complex via hydrophobic interactions. The oxidant power of Eugenol was retained in complex form as indicated by DPV results. Thus, its oxidation dependent pharmacological property such as antimicrobial activity is not affected after complexation with Hp-β-CD. Thus, (1)H-NMR, 2D-NMR and DPV techniques can be used as valuable tools to determine the mechanism of complexation and state of electrochemical active drug in inclusion complex.     

Preparation and characterization of theβ-cyclodextrin inclusion complex with sulfafurazole

The 1 : 1 inclusion complex involving sulfafurazole (SF) and-cyclodextrin (-CD) is prepared by the freeze-drying method and characterized on the basis of its chemical analysis, thermal behavior, infrared spectrum, X-ray powder pattern and¹³C NMR spectrum in DMSO-d₆ solution. The stability constant of the inclusion complex was determined by the solubility method. The effect of cyclodextrin on the UV absorption spectrum of sulfafurazole was also observed.     

Sensitive determination of 17β-estradiol in river water using a graphene based electrochemical sensor

In this study, a novel material for the electrochemical determination of 17β-estradiol using an electrode based on reduced graphene oxide and a metal complex porphyrin has been applied to environmental monitoring. The electrochemical profile of the proposed electrode was analyzed by differential pulse voltammetry, which showed a shift of the oxidation peak potential of 17β-estradiol to 150 mV in a less positive direction compared to the bare reduced graphene oxide electrode. DPV experiments were performed in PBS at pH 7.0 to determine 17β-estradiol without any previous step of extraction, cleanup, or derivatization, in the range of 0.1–1.0 μmol L⁻¹ with a detection limit archived at 5.3 nmol L⁻¹ (1.4 μg L⁻¹). The proposed sensor was successfully applied in the determination of 17β-estradiol in a river water sample without any purification step and was successfully analyzed under the standard addition method. All the obtained results were in agreement with those from the HPLC procedure.     

Synthesis of cyclicβ-silylenones via oxidative rearrangement of tertiaryα-hydroxy allylsilanes with PCC

An oxidative rearrangement of cyclic tertiary a-hydroxy allylsilanes has been carried out in refluxing ClCH₂CH₂Cl with pyridinium chlorochromate（PCC）.The reaction provides a convenient method to synthesize cyclicβ-silylenones in modest to excellent yields.     

Development of Magnetic Particle-based Chemiluminescence Enzyme Immunoassay for the Detection of 17β-estradiol in Environmental Water

In the present work, a simple, fast, and highly sensitive chemiluminescence enzyme immunoassay for 17β-estradiol (E2) in environmental water samples was developed, using magnetic particles (MPs) labeled with secondary antibody as both the immobilization matrix and the separation tools. The specific anti-E2 polyclonal antibody (PcAb) was produced against a conjugate of estradiol–bovine serum albumin. The specificity of the anti-E2 antibody was studied. The results showed that the antibody did not cross-react with the structurally related endocrine-disrupting compounds, including estrone, ethinyl E2, estriol, E2-17-glucuronide, E2-3-sulfate-17-glucuronide, androstenedione, and dihydrotestosterone. The water samples were pretreated with solid-phase extraction using C₁₈ cartridges for the removal of matrix effects. Several physicochemical parameters including the dilution ratios of E2-6–horseradish peroxidase conjugate and anti-E2 PcAb, immunoreaction time, volume of chemiluminescent substrate and MPs, chemiluminescence reaction time, and pH of assay solution were studied and optimized. At optimal experimental conditions, it was found that the proposed method exhibited high performance with detection limit of 2.0 pg/mL, linear range of 20–1,200 pg/mL, and total assay time of 45 min. Both inter- and intra-assay coefficient of variation were less than 10%. The average recoveries of three different spiked concentration samples ranged from 86.3% to 108%. The method was successfully applied to the determination of E2 in river, waste, and tap water, and showed a good correlation with the commercially available radioimmunoassay kit.     

Electrochemical studies of cationic drug inclusion complexes with α- andβ-cyclodextrins

Drug membrane selective electrodes have been constructed for the cationic drug propranolol hydrochloride, diphenhydramine hydrochloride, diphenylpyraline hydrochloride and also chlorcyclizine hydrochloride. The characteristics of these drug selective electrodes have been evaluated and the electrodes used to measure equilibrium constants of the inclusion compounds involving the drugs with both - and-cyclodextrins. The enthalpies and entropies associated with the formation of the inclusion complexes have also been estimated from the temperature dependence of the equilibrium constants.     

Selective reduction of the acyl group in cyclic α-acyl-β-dicarbonyl compounds with sodium cyanoborohydride. Efficient synthesis of cyclic α-alkyl-β-dicarbonyl compounds

Efficient synthesis of cyclic -alkyl--dicarbonyl compounds of the cyclopentane, cyclohexane, tetronic acid, and -pyrone series from the corresponding cyclic -acyl--dicarbonyl compounds under the action of NaBH₃(CN) in a THF--HCl system is described.     

Physicochemical characterization of spray dried ternary micro-complexes of cefuroxime axetil with hydroxypropyl-β-cyclodextrin

The physicochemical properties of spray dried micro-complexes of cefuroxime axetil (CFA) with hydroxypropyl-β-cyclodextrin (HPβCD) in presence and/or absence of ternary components polyvinylpyrrolidone K30 (PVP K30), hydroxypropylmethylcellulose (HPMC), poloxamer 188 and/or polyethylene glycol 4000 (PEG 4000) along with Aerosil^®200 as an adsorbent were investigated. The phase solubility studies revealed A_L type of solubility curve in binary as well as ternary systems. The stability constant 382.70 ± 2.4 M^?1 of binary system i.e. CFA with HPβCD was significantly improved to 427.84 ± 3.8, 447.09 ± 4.3, 488.28 ± 4.6 and 502.21 ± 5.1 M^?1 in presence of PVP K30, HPMC, poloxamer 188 and PEG 4000 respectively indicating positive effect of their addition. The micro-complexes of CFA were characterized by Fourier transformation infrared spectroscopy, X-ray powder diffractometry, differential scanning calorimetry, scanning electron microscopy, particle size analysis, and dissolution. In all characterization studies, ternary systems performed better in comparison to binary systems as a result of synergistic effect of ternary complexation as well as particle size reduction achieved by a spray drying technology.