Radical Compatibility with Nonaqueous Electrolytes and Its Impact on an All‐Organic Redox Flow Battery

Nonaqueous redox flow batteries hold the promise of achieving higher energy density because of the broader voltage window than aqueous systems, but their current performance is limited by low redox material concentration, cell efficiency, cycling stability, and current density. We report a new nonaqueous all‐organic flow battery based on high concentrations of redox materials, which shows significant, comprehensive improvement in flow battery performance. A mechanistic electron spin resonance study reveals that the choice of supporting electrolytes greatly affects the chemical stability of the charged radical species especially the negative side radical anion, which dominates the cycling stability of these flow cells. This finding not only increases our fundamental understanding of performance degradation in flow batteries using radical‐based redox species, but also offers insights toward rational electrolyte optimization for improving the cycling stability of these flow batteries.     

Electrochromic Poly(chalcogenoviologen)s as Anode Materials for High‐Performance Organic Radical Lithium‐Ion Batteries

A series of electrochromic electron‐accepting poly(chalcogenoviologen)s with multiple, stable, and reversible redox centers were used as anodic materials in organic radical lithium‐ion batteries (ORLIBs). The introduction of heavy atoms (S, Se, and Te) into the viologen scaffold significantly improved the capacity and cycling stability of the ORLIBs. Notably, the poly(Te‐BnV) anode was able to intercalate 20 Li ions and showed higher conductivity and insolubility in the electrolyte, thus contributing to a reversible capacity of 502 mAh g^?1 at 100 mA g^?1 when the Coulombic efficiency approached 100 %. The charged/discharged state of flexible electrochromic batteries fabricated from these anodic materials could be monitored visually owing to the unique electrochromic and redox properties of the materials. This study opens a promising avenue for the development of organic polymer‐based electrodes for flexible hybrid visual electronics.     

Characterization of SEI layer formed on high performance Si–Cu anode in ionic liquid battery electrolyte

Formation of the SEI layer on Si–Cu film electrode in the ionic liquid electrolyte of 1 M lithium bis(trifluoromethylsulfonyl)imide/1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide (LiTFSI/MPP-TFSI) was investigated using ex-situ ATR FTIR and X-ray photoelectron spectroscopy. The SEI layer is found to be composed of organic and inorganic compounds that are the decomposition products of MPP cation and TFSI anion, and effectively passivate the electrode surface during initial cycling. Formation of a stable SEI layer leads to an excellent capacity retention 98% of the maximum discharge capacity, delivering discharge capacities of > 1620 mAhg^? 1 over 200 cycles. The data contribute to a basic understanding of SEI formation and composition responsible for the cycling performance of Si-based alloy anodes in ionic liquid electrolyte-based rechargeable lithium batteries.     

Comparative surface analysis study of the solid electrolyte interphase formation on graphite anodes in lithium‐ion batteries depending on the electrolyte composition

The composition of the solid electrolyte interphase (SEI) on graphite anodes is characterized within a comparative surface analytical study varying systematically the electrolyte composition and the cycling conditions. In particular, the conducting salts lithium hexafluorophosphate and lithium bis(trifluoromethanesulfonyl)imide as well as vinylene carbonate and 1‐fluoroethylene carbonate as different electrolyte additives are compared regarding the SEI formation under different cycling conditions. A comprehensive study using X‐ray photoelectron spectroscopy revealed pronounced differences of the SEI compositions at different aging stages. Both additives significantly influence the SEI composition and are able to prevent from parasitic side reactions as well as from decomposition of the conducting salt lithium hexafluorophosphate. This study suggests a promising approach to improve the SEI properties to enhance long‐term stability of lithium‐ion batteries by changing the electrolyte composition. Copyright © 2016 John Wiley & Sons, Ltd.     

Solvent Molecule Cooperation Enhancing Lithium Metal Battery Performance at Both Electrodes

Developing electrolytes compatible with efficient and reversible cycling of electrodes is critical to the success of rechargeable Li metal batteries (LMBs). The Coulombic efficiencies and cycle lives of LMBs with ethylene carbonate (EC), dimethyl carbonate, ethylene sulfite (ES), and their combinations as electrolyte solvents show that in a binary‐solvent electrolyte the extent of electrolyte decomposition on the electrode surface is dependent on the solvent component that dominates the solvation sheath of Li⁺. This knowledge led to the development of an EC‐ES electrolyte exhibiting high performance for Li||LiFePO₄ batteries. Carbonate molecules occupy the solvation sheath and improve the Coulombic efficiencies of both the anode and cathode. Sulfite molecules lead to desirable morphology and composition of the solid electrolyte interphase and extend the cycle life of the Li metal anode. The cooperation between these components provides a new example of electrolyte optimization for improved LMBs.     

Chloromethyl pivalate based electrolyte for non-aqueous lithium oxygen batteries

A novel electrolyte with chloromethyl pivalate(CP) used as solvent was first reported for non-aqueous lithium-oxygen(Li-O_2) batteries. Since there are no α-H atoms in the structure of CP, the CP based electrolyte in both superoxide radical solution and real Li-O_2 battery environment showed good chemical stability against superoxide radicals, which was confirmed by ~1H NMR and ~13C NMR measurements.Without a catalyst in the cathode of Li-O_2 batteries, the batteries showed high specific capacity and cycling stability.     

In-situ FTIR investigations on the reduction of vinylene electrolyte additives suitable for use in lithium-ion batteries

Lithium-ion batteries operate beyond the thermodynamic stability of the aprotic organic electrolyte used and electrolyte decomposition occurs at both electrodes. The electrolyte must therefore be composed in a way that its decomposition products form a film on the electrodes which stops the decomposition reactions but is still permeable to the Li(+) cations which are the charge carriers. At the graphite anode, this film is commonly referred to as a solid electrolyte interphase (SEI). Aprotic organic compounds containing vinylene groups can form an effective SEI on a graphitic anode. As examples, vinyl acetate (VA) and acrylonitrile (AN) have been investigated by in-situ Fourier transform infrared (FTIR) spectroscopy in a specially developed IR cell. The measurements focus on electrolyte decomposition and the mechanism of SEI formation in the presence of VA and AN. We conclude that cathodic reduction of the vinylene groups (i.e., via reduction of the double bond) in the electrolyte additives is the initiating and thus a most important step of the SEI-formation process, even in an electrolyte which contains only a few percent (i.e. electrolyte additive amounts) of the compound. The possibility of electropolymerization of the vinylene monomers in the battery electrolytes used is critically discussed on the basis of the IR data obtained.     

A Radical Pathway and Stabilized Li Anode Enabled by Halide Quaternary Ammonium Electrolyte Additives for Lithium-Sulfur Batteries

Passivation of the sulfur cathode by insulating lithium sulfide restricts the reversibility and sulfur utilization of Li−S batteries. 3D nucleation of Li₂S enabled by radical conversion may significantly boost the redox kinetics. Electrolytes with high donor number (DN) solvents allow for tri-sulfur (S₃⋅⁻) radicals as intermediates, however, the catastrophic reactivity of such solvents with Li anodes pose a great challenge for their practical application. Here, we propose the use of quaternary ammonium salts as electrolyte additives, which can preserve the partial high-DN characteristics that trigger the S₃⋅⁻ radical pathway, and inhibit the growth of Li dendrites. Li−S batteries with tetrapropylammonium bromide (T3Br) electrolyte additive deliver the outstanding cycling stability (700 cycles at 1 C with a low-capacity decay rate of 0.049 % per cycle), and high capacity under a lean electrolyte of 5 μL_electrolyte mg_sulfur⁻¹. This work opens a new avenue for the development of electrolyte additives for Li−S batteries.     

Electrolyte Regulation towards Stable Lithium-Metal Anodes in Lithium–Sulfur Batteries with Sulfurized Polyacrylonitrile Cathodes

Lithium–sulfur (Li–S) batteries are highly regarded as the next-generation energy-storage devices because of their ultrahigh theoretical energy density of 2600 Wh kg⁻¹. Sulfurized polyacrylonitrile (SPAN) is considered a promising sulfur cathode to substitute carbon/sulfur (C/S) composites to afford higher Coulombic efficiency, improved cycling stability, and potential high-energy-density Li–SPAN batteries. However, the instability of the Li-metal anode threatens the performances of Li–SPAN batteries bringing limited lifespan and safety hazards. Li-metal can react with most kinds of electrolyte to generate a protective solid electrolyte interphase (SEI), electrolyte regulation is a widely accepted strategy to protect Li-metal anodes in rechargeable batteries. Herein, the basic principles and current challenges of Li–SPAN batteries are addressed. Recent advances on electrolyte regulation towards stable Li-metal anodes in Li–SPAN batteries are summarized to suggest design strategies of solvents, lithium salts, additives, and gel electrolyte. Finally, prospects for future electrolyte design and Li anode protection in Li–SPAN batteries are discussed.     

Ion–Solvent Complexes Promote Gas Evolution from Electrolytes on a Sodium Metal Anode

Lithium and sodium metal batteries are considered as promising next‐generation energy storage devices due to their ultrahigh energy densities. The high reactivity of alkali metal toward organic solvents and salts results in side reactions, which further lead to undesirable electrolyte depletion, cell failure, and evolution of flammable gas. Herein, first‐principles calculations and in situ optical microscopy are used to study the mechanism of organic electrolyte decomposition and gas evolution on a sodium metal anode. Once complexed with sodium ions, solvent molecules show a reduced LUMO, which facilitates the electrolyte decomposition and gas evolution. Such a general mechanism is also applicable to lithium and other metal anodes. We uncover the critical role of ion–solvent complexation for the stability of alkali metal anodes, reveal the mechanism of electrolyte gassing, and provide a mechanistic guidance to electrolyte and lithium/sodium anode design for safe rechargeable batteries.     

Solvation Structure with Enhanced Anionic Coordination for Stable Anodes in Lithium-Oxygen Batteries

Li-O₂ batteries have garnered much attention due to their high theoretical energy density. However, the irreversible lithium plating/stripping on the anode limits their performance, which has been paid little attention. Herein, a solvation-regulated strategy for stable lithium anodes in tetraethylene glycol dimethyl ether (G4) based electrolyte is attempted in Li-O₂ batteries. Trifluoroacetate anions (TFA⁻) with strong Li⁺ affinity are incorporated into the lithium bis(fluorosulfonyl)imide (LiTFSI)/G4 electrolyte to attenuate the Li⁺-G4 interaction and form anion-dominant solvates. The bisalt electrolyte with 0.5 M LiTFA and 0.5 M LiTFSI mitigates G4 decomposition and induces an inorganic-rich solid electrolyte interphase (SEI). This contributes to decreased desolvation energy barrier from 58.20 to 46.31 kJ mol⁻¹, compared with 1.0 M LiTFSI/G4, for facile interfacial Li⁺ diffusion and high efficiency. It yields extended lifespan of 120 cycles in Li-O₂ battery with a limited Li anode (7 mAh cm⁻²). This work gains comprehensive insights into rational electrolyte design for Li-O₂ batteries.     

Electrolyte Regulation towards Stable Lithium‐Metal Anodes in Lithium–Sulfur Batteries with Sulfurized Polyacrylonitrile Cathodes

Lithium–sulfur (Li–S) batteries are highly regarded as the next‐generation energy‐storage devices because of their ultrahigh theoretical energy density of 2600 Wh kg^?1. Sulfurized polyacrylonitrile (SPAN) is considered a promising sulfur cathode to substitute carbon/sulfur (C/S) composites to afford higher Coulombic efficiency, improved cycling stability, and potential high‐energy‐density Li–SPAN batteries. However, the instability of the Li‐metal anode threatens the performances of Li–SPAN batteries bringing limited lifespan and safety hazards. Li‐metal can react with most kinds of electrolyte to generate a protective solid electrolyte interphase (SEI), electrolyte regulation is a widely accepted strategy to protect Li‐metal anodes in rechargeable batteries. Herein, the basic principles and current challenges of Li–SPAN batteries are addressed. Recent advances on electrolyte regulation towards stable Li‐metal anodes in Li–SPAN batteries are summarized to suggest design strategies of solvents, lithium salts, additives, and gel electrolyte. Finally, prospects for future electrolyte design and Li anode protection in Li–SPAN batteries are discussed.     

2-Methoxyhydroquinone from Vanillin for Aqueous Redox-Flow Batteries

We show the synthesis of a redox-active quinone, 2-methoxy-1,4-hydroquinone (MHQ), from a bio-based feedstock and its suitability as electrolyte in aqueous redox flow batteries. We identified semiquinone intermediates at insufficiently low pH and quinoid radicals as responsible for decomposition of MHQ under electrochemical conditions. Both can be avoided and/or stabilized, respectively, using H₃PO₄ electrolyte, allowing for reversible cycling in a redox flow battery for hundreds of cycles.     

Boosting the “Solid–Liquid–Solid” Conversion Reaction via Bifunctional Carbonate-Based Electrolyte for Ultra-long-life Potassium–Sulfur Batteries

Potassium–sulfur (K−S) batteries have attracted wide attention owing to their high theoretical energy density and low cost. However, the intractable shuttle effect of K polysulfides results in poor cyclability of K−S batteries, which severely limits their practical application. Herein, a bifunctional concentrated electrolyte (3 mol L⁻¹ potassium bis(trifluoromethanesulfonyl)imide in ethylene carbonate (EC)) with high ionic conductivity and low viscosity is developed to regulate the dissolution behavior of polysulfides and induce uniform K deposition. The organic groups in the cathode electrolyte interphase layer derived from EC can effectively block the polysulfide shuttle and realize a “solid–liquid–solid” reaction mechanism. The KF-riched solid-electrolyte interphase inhibits K dendrite growth during cycling. As a result, the achieved K−S batteries display a high reversible capacity of 654 mAh g⁻¹ at 0.5 A g⁻¹ after 800 cycles and a long lifespan over 2000 cycles at 1 A g⁻¹.     

Effect of cations in ionic liquids on the electrochemical performance of lithium-sulfur batteries

Lithium-sulfur(Li-S) battery is a promising choice for the next generation of high-energy rechargeable batteries, but its application is impeded by the high dissolution of the polysulfides in commonly used organic electrolyte. Room temperature ionic liquids(RTILs) have been considered as appealing candidates for the electrolytes in Li-S batteries. We investigated the effect of cations in RTILs on the electrochemical performance for Li-S batteries. Ex situ investigation of lithium anode for Li-S batteries indicates that during the discharge/charge process the RTIL with N-methyl-N-propylpyrrolidine cations(P13) can effectively suppress the dissolution of the polysulfides, whereas the RTIL with 1-methyl-3-propyl imidazolium cation(PMIM) barely alleviates the shuttling problem. With 0.5 mol L-1 LiTFSI/P13 TFSI as the electrolyte of Li-S battery, the ketjen black/ sulfur cathode material exhibits high capacity and remarkable cycling stability, which promise the application of the P13-based RTILs in Li-S batteries.     

Electrolyte Design for Improving Mechanical Stability of Solid Electrolyte Interphase in Lithium–Sulfur Batteries

Practical lithium–sulfur (Li−S) batteries are severely plagued by the instability of solid electrolyte interphase (SEI) formed in routine ether electrolytes. Herein, an electrolyte with 1,3,5-trioxane (TO) and 1,2-dimethoxyethane (DME) as co-solvents is proposed to construct a high-mechanical-stability SEI by enriching organic components in Li−S batteries. The high-mechanical-stability SEI works compatibly in Li−S batteries. TO with high polymerization capability can preferentially decompose and form organic-rich SEI, strengthening mechanical stability of SEI, which mitigates crack and regeneration of SEI and reduces the consumption rate of active Li, Li polysulfides, and electrolytes. Meanwhile, DME ensures high specific capacity of S cathodes. Accordingly, the lifespan of Li−S batteries increases from 75 cycles in routine ether electrolyte to 216 cycles in TO-based electrolyte. Furthermore, a 417 Wh kg⁻¹ Li−S pouch cell undergoes 20 cycles. This work provides an emerging electrolyte design for practical Li−S batteries.     

磷酸三甲酯和碳酸亚乙烯酯对锂离子电池的复合作用

应用循环伏安、交流阻抗、扫描电子显微镜和锂离子电池性能检测装置研究了阻燃添加剂磷酸三甲酯(TMP)和成膜添加剂碳酸亚乙烯酯(VC)对锂离子电池的复合作用.结果表明,复合使用TMP和VC不仅能提高电池的安全性而且能改善电池的循环性能,原因可能是在电池首次充放电过程中VC优先还原,还原产物在负极表面聚合形成良好的SEI膜,有效地制约了因TMP在石墨负极表面的分解而造成负极石墨的脱落,同时提高了SEI膜的稳定性.     

Au(111)表面Verdazyl自由基的构象转换

Pure organic radical molecules on metal surfaces are of great significance in exploration of the electron spin behavior. However, only a few of them are investigated in surface studies due to their poor thermal stability. The adsorption and conformational switching of two verdazyl radical molecules, namely, 1, 5-biisopropyl-3-(benzo[b]benzo[4,5]thieno[2, 3-d]thiophen-2-yl)-6-oxoverdazyl (B2P) and 1, 5-biisopropyl-3-(benzo[b]benzo[4,5]thieno[2, 3-d]thiophen-4-yl)-6-oxoverdazyl (B4P), are studied by scanning tunneling microscopy (STM) and density functional theory (DFT). The adsorbed B2P molecules on Au(111) form dimers, trimers and tetramers without any ordered assembly structure in which two distinct appearances of B2P in STM images are observed and assigned to be its "P" and "T" conformations. The "P" conformation molecules appear in the STM image with a large elliptical protrusion and two small ones of equal size, while the "T" ones appear with a large protrusion and two small ones of different size. Likewise, the B4P molecules on Au(111) form dimers at low coverage, strip structure at medium coverage and assembled structure at high coverage which also consists of above-mentioned two conformations. Both B2P molecules and B4P molecules are held together by weak intermolecular interaction rather than chemical bond. STM tip induced conformational switching of both verdayzl radicals is observed at the bias voltage of +2.0 V. The "T" conformation of B2P can be switched to the "P" while the "P" conformation of B4P can be switched to the "T" one. For both molecules, such a conformational switching is irreversible. The DFT calculations with Perdew-Burke-Ernzerhof version exchange-correlation functional are used to optimize the model structure and simulate the STM images. STM images of several possible molecular conformations with different isopropyl orientation and different tilt angle between verdazyl radical and Au(111) surface are simulated. For conformations with different isopropyl orientation, the STM simulated images are similar, while different tilt angles of verdazyl radical lead to significantly different STM simulated images. Combined STM experiments and DFT simulations reveal that the conformational switching originates from the change of tilting angle between the verdazyl radical and Au(111) surface. The tilt angles in "P" and "T" conformations are 0° and 50°, respectively. In this study, two different adsorption conformations of verdazyl radicals on the Au(111) surface are presented and their exact adsorption structures are identified. This study provides a possible way to study the relationship between the electron spin and configuration conversion of pure organic radical molecules and a reference for designing more conformational switchable radical molecules that can be employed as interesting molecular switches.     

Monitoring electrode/electrolyte interfaces of Li-ion batteries under working conditions: A surface-enhanced Raman spectroscopic study on LiCoO2 composite cathodes

Lithium-ion batteries are commonly used for electrical energy storage in portable devices and are promising systems for large-scale energy storage. However, their application is still limited due to electrode degradation and stability issues. To enhance the fundamental understanding of electrode degradation, we report on the Raman spectroscopic characterization of LiCoO₂ cathode materials of working Li-ion batteries. To facilitate the spectroscopic analysis of the solid electrolyte interface (SEI), we apply in situ surface-enhanced Raman spectroscopy under battery working conditions by using Au nanoparticles coated with a thin SiO₂ layer (Au@SiO₂). We observe a surface-enhanced Raman signal of Li₂CO₃ at 1090 cm⁻¹ during electrochemical cycling as an intermediate. Its formation/decomposition highlights the role of Li₂CO₃ as a component of the SEI on LiCoO₂ composite cathodes. Our results demonstrate the potential of Raman spectroscopy to monitor electrode/electrolyte interfaces of lithium-ion batteries under working conditions thus allowing relations between electrochemical performance and structural changes to be established.     

Effect of solvents on properties of polymer gel-electrolyte based on polyester diacrylate

New polymer gel electrolytes based on polyester diacrylates and LiClO₄ salt solutions in organic solvents are developed for lithium ion and lithium polymer batteries with a high ionic conductivity up to 2.7 × 10^?3 Ohm^?1cm^?1 at the room temperature. To choose the optimum liquid electrolyte composition, the dependence is studied of physico-chemical parameters of new gel electrolytes on the composition of the mixture of aprotic organic solvents: ethylene carbonate, propylene carbonate, and λ-butyrolacton. The bulk conductivity of gel electrolytes and exchange currents at the gel electrolyte/Li interface are studied using the electrochemical impedance method in symmetrical cells with two Li electrodes. The glass transition temperature and gel homogeneity are determined using the method of differential scanning calorimetry. It is found that the optimum mixture is that of propylene carbonate and λ-butyrolacton, in which a homogeneous polymer gel is formed in a wide temperature range of ?150 to +50°C.