金银纳米粒子的电化学性质及联苯胺的SERS研究

采用柠檬酸钠还原氯金酸,硼氢化钠还原硝酸银分别制备了较小粒径的金、银纳米粒子。运用紫外可见吸收光谱(UV-Vis)、扫描电子显微镜(SEM)、循环伏安法(CV)对金、银纳米粒子进行了表征。结果表明：所得金、银纳米粒子粒径分别约为16和10 nm,并能以亚单层形式组装于导电玻璃(ITO)表面;CV图显示金、银纳米粒子分别有一对不对称的氧化还原峰,而且纳米粒子的浓度对其氧化还原电位存在一定的影响。采用自组装方法,以联苯胺为偶联分子, 在粗糙金基底表面构筑了金/银纳米粒子的双层有序结构。表面增强拉曼光谱研究表明, 在有序金银纳米粒子组装体中偶联分子的拉曼散射得到了增强。     

Electrochemical method for the synthesis of silver nanoparticles

The article deals with a novel electrochemical method of preparing long-lived silver nanoparticles suspended in aqueous solution as well as silver powders. The method does not involve the use of any chemical stabilising agents. The morphology of the silver nanoparticles obtained was studied using transmission electron microscopy, scanning electron microscopy, atomic force microscopy and dynamic light scattering measurements. Silver nanoparticles suspended in water solution that were produced by the present technique are nearly spherical and their size distribution lies in the range of 2 to 20 nm, the average size being about 7 nm. Silver nanoparticles synthesised by the proposed method were sufficiently stable for more than 7 years even under ambient conditions. Silver crystal growth on the surface of the cathode in the electrochemical process used was shown to result in micron-sized structures consisting of agglomerated silver nanoparticles with the sizes below 40 nm.     

Investigation of size distribution of silver nanoparticles

In this work, we present a physical methodology of preparing silver nanoparticles suspended in the deionized water. For this purpose, we apply the DC spark method and present the size distribution (by Zetasizer) and optical properties (by UV/VIS) of the nanoparticles in two different voltages. The obtained results using the DC spark method show that the fabrication of silver nanoparticles in deionized water without any surfactants and stabilizers is relatively cheap and pollution free. Using the method, we could prepare the silver nanoparticles smaller than 5 nm.     

Simple and environmentally friendly preparation and size control of silver nanoparticles using an inhomogeneous system with silver-containing glass powder

A simple, environmentally friendly method for preparing highly size-controlled spherical silver nanoparticles was developed that involved heating a mixture of silver-containing glass powder and an aqueous solution of glucose. The stabilizing agent for silver nanoparticles was found to be caramel, which was generated from glucose when preparing the nanoparticles. The particle size was independent of the reaction time, but it increased proportionally with the square root of the glucose concentration in the range 0.25–8.0 wt% (corresponding to particle sizes of 3.48 ± 1.83 to 20.0 ± 2.76 nm). Difference of the generation mechanism of silver nanoparticles between this inhomogeneous system and a system in which Ag⁺ was homogeneously dispersed was discussed.     

One-step synthesis and antibacterial property of water-soluble silver nanoparticles by CGJ bio-template

In this article, a new synthetic method of nanoparticles with fresh Chinese gooseberry juice (CGJ) as bio-template was developed. One-step synthesis of highly water-soluble silver nanoparticles at room temperature without using any harmful reducing agents and special capping agent was fulfilled with this method. In the process, the products were obtained by adding AgNO₃ to CGJ, which was used as reducing agent, capping agent, and the bio-template. The products of silver nanoparticles with diameter of 10–30 nm have strong water solubility and excellent antibiotic function. With the same concentration 0.047 μg mL⁻¹, the antibacterial effect of water-soluble silver particles by fresh CGJ was 53%, whereas only 27% for silver nanoparticles synthesized using the template method of fresh onion inner squama coat (OISC). The excellent water solubility of the products would enable them have better applications in the bio-medical field. The synthetic method would also have potential application in preparing other highly water-soluble particles, because of its simple apparatus, high yield, mild conditions, and facile operation.     

A novel approach for preparing silver nanoparticles under electron beam irradiation

Silver (Ag) nanoparticles were obtained when Ag microparticles were exposed to an electron beam in a transmission electron microscope (TEM). Results from TEM characterization indicated that the morphologies of the prepared Ag nanoparticles were quasi-circular, and the sizes were mainly in the range of 5–60 nm. The effect of irradiation time (t) on size and distribution of Ag nanoparticles was investigated. It was found that the sizes of Ag nanoparticles increased with the increase of t. The bigger Ag nanoparticles were near the Ag microparticle and the smaller ones were far from it. In addition, these Ag nanoparticles were monodisperse. This approach offered a new route for preparing Ag nanoparticles under electron beam irradiation, and the forming process of Ag nanoparticles was explained by the nucleation-growth mechanism.     

Metal Enhanced Fluorescence Solution-based Sensing Platform 2: Fluorescent Core-Shell Ag@SiO<Subscript>2</Subscript> Nanoballs

In this Rapid Communication, we present the development of monodisperse core-shell (silver core-silica shell) nanoparticles with various shell thicknesses featuring a fluorophore, subsequently named Metal-Enhanced Fluorescence (MEF) nanoballs. MEF nanoballs consist of a ≈130 nm silver nanoparticle core, a silica shell with up to 35 nm thickness and fluorophores doped within the silica shell. Fluorescent nanobubbles where the silver core is removed by chemical etching are used as control samples to show the benefits of using silver nanoparticles, i.e, Metal-Enhanced Fluorescence. Finally, we demonstrate the broad potential biological applications of MEF nanoballs by employing near-infra red emitting probes (Rhodamine 800) within the silica shell, for potential applications in cellular imaging and solution-based sensing. Kadir Aslan, Meng Wu, Contributed equally     

Synthesis of novel magnetic phosphazene-containing polymer microspheres with active hydroxyl groups

Monodisperse magnetic phosphazene-containing polymer microspheres with active hydroxyl groups were prepared at room temperature by ultrasonic irradiation. The morphology and structure of the magnetic poly(cyclotriphosphazene-co-4,4′-sulfonyldiphenol) (PZS) microspheres were characterized and the coordination behavior between magnetic nanoparticles and PZS microspheres was investigated. The magnetic measurements reveal that the magnetic microspheres are superparamagnetic with saturation magnetization of 34.9 emu/g. The paper presents a simple, economic and environmentally friendly route to preparing monodisperse magnetic hybrid inorganic-organic microspheres with functional groups.     

Preparation of monodisperse magnetite nanoparticles under mild conditions

In this paper, we reported a method to prepare monodisperse magnetite nanoparticles at mild temperature using cheap and non-toxic precursors. It overcomes the shortages of chemical co-precipitation method and thermal decomposition method and combines the advantages of facile, cheap, large-scale, monodisperse, nanosize, and low synthesis temperature and low toxic. In this method, FeCl₃ · 6H₂O, FeCl₂ · 4H₂O and sodium oleate were mixed in toluene/ethanol/water mixture solvent and refluxed at 74 °C to prepare magnetite nanoparticles directly. The nanoparticles were characterized by transmission electron microscopy, dynamic light scattering, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectrometer and thermogravimetric analysis. The magnetic properties of nanoparticles were measured by superconducting quantum interference device. The results showed that the nanoparticles are well-monodisperse with about 4–5 nm of average diameter. The nanoparticles were proved to be superparamagnetic with saturated magnetization 23.6 emu/g and blocking temperature 24.4 K. A possible formation mechanism of monodisperse magnetite nanoparticles was presented at the same time.     

Green Synthesis of Silver Nanoparticles at Room Temperature Using Kiwifruit Juice

Comparing with physical and chemical methods, green synthesis techniques are emerging as facile and eco-friendly methods for the synthesis of silver nanoparticles. In this work, we demonstrated the biological synthesis of silver nanoparticles by the reduction of silver ions using kiwifruit juice as the reducing and stabilizing reagent. From the evidence of ultraviolet-visible spectroscopy and transmission electron microscopy, different sizes of silver nanoparticles were formed when the juice volume, reaction temperature, and reaction time were altered with respect to 0.01% silver acetate solution. The synthesized silver nanoparticles were stable for more than 1 month. Transmission electron microscopy studies showed the silver nanoparticles synthesized in room temperature have the diameters in the range of 5–25 nm. The proposed synthesis method is green and low cost, and the synthesized silver nanoparticles have potential bioanalytical applications.     

SERS characterization of metallic silver nanoparticle self‐assembly within thin films

Clusters of silver nanoparticles are generated by the thermally initiated reduction of silver carboxylates (long‐chain fatty acids) in the thin polymer films. The size, shape, and aggregation of these nanoparticles are affected by the reduction reaction in the presence of capping agents. In order to understand the mechanism(s) controlling the silver structure formation, it is essential to understand the surface coordination chemistry occurring during this process. We now report the first application of surface‐enhanced Raman spectroscopy (SERS) to directly characterize adsorbates on the surfaces of silver nanoparticles within a thin film imaging construction containing multiple components. In addition, SERS investigation of model silver substrates was used to confirm the identify of specific adsorbates of silver complexes. This is a powerful tool for revealing the chemistry involved with the control of silver nanoparticle aggregation during thermally induced metallic silver formation within thin films. Both the catechol‐reducing agent and the phthalazinone (PAZ) particle aggregation agent are observed on the metallic silver surface at the initial particle formation and during its crystal growth. However, careful attention to excitation wavelength is required in order to observe all the surface species. PAZ appears to be more effective at stabilizing individual silver particles than other aggregation agents investigated. An understanding of the roles of the aggregation/reducing agents in the growth and aggregation of silver nanoparticles is important for preparing different types of silver particles for specific applications including silver‐based thermal imaging systems. Copyright © 2008 John Wiley & Sons, Ltd.     

CdS纳米粒子的自组装单分子膜制备研究

利用疏基乙酸与草酸的混合自组装单分子膜成功制备了粒径分布均匀的CdS纳米粒子，并用SEM，XRD，XPS，PL对样品进行了表征。SEM表明形成在自组装单分子膜表面上的CdS纳米粒子的平均粒径约为45nm。XPS表明在自组装单分子膜表面形成了CdS纳米粒子。PL谱表明CdS纳米粒子在675nm有一峰值波长，我们认为这一发光是由表面缺陷造成的。     

银纳米粒子的SERS效应和SEF效应在微流控芯片光学检测中的应用

银纳米离子的SERS技术和SEF技术的信号检测灵敏度非常高,可以用在微流控芯片的定量分析中。为了提高微流控芯片光学检测技术的检测精度,提出一种在微通道中添加银纳米粒子来增强SYBR GreenⅠ拉曼和荧光信号的方法,并对该方法的原理和增强效果进行了研究。首先,利用准分子激光器在PMMA基板上直写刻蚀出宽200 μm、深68 μm的微通道,接着将制备的银前体溶液加入微通道,通过加热制备出表面增强拉曼（SERS）和表面增强荧光（SEF）基板,接下来对添加银纳米粒子前后的拉曼和荧光信号分别进行对比,进一步研究了微通道中不同浓度银纳米粒子对SYBR GREEN I的拉曼和荧光信号增强效果。添加银纳米粒子后,表面增强拉曼（SERS）实验的增强因子为3.5×10³,添加银纳米粒子的样品的荧光信号强度与不含银纳米粒子样品的荧光信号强度相比,约增加了1倍。结果表明,在微通道中检测SYBR Green I时通过增加银纳米粒子显著地增强了拉曼和荧光信号,这种方法可以用在以SYBR GreenⅠ做染料的微流控芯片检测技术中。     

Modelling of optical absorption of silver NP’s produced by UV radiation embedded in mesostructured silica films

Hexagonal mesostructured films containing silver ions were obtained by sol–gel method. Brij 58 was used to produce channels into the film, which house these ions. The films were exposure to UV radiation to produced silver metallic nanoparticles. The presence of the metallic nanoparticles was determined by infrared spectroscopy and optical absorption. Besides, these nanoparticles and core–shell structures of silver–silver oxide nanoparticles were identified by high-resolution transmission electronic microscopy. From these measurements, the obtained size range for silver nanoparticles was 6.1 nm. The absorption spectrum located at 440 nm was modelled and well fitted with the Gans theory considering refractive index higher than the one coming from host matrix. This index is explained because the silver oxide shell modifies the local surrounding medium of the metallic nanoparticles.     

银纳米粒子对抗生素诺氟沙星的荧光猝灭效应

以β-环糊精(β-CD)为稳定剂,葡萄糖为还原剂,采用"绿色化学方法"合成了平均粒径约为31nm的类球形银纳米粒子。研究了其对水溶液中痕量诺氟沙星荧光行为的影响,实验结果表明,制得的银纳米粒子对诺氟沙星具有较强的荧光猝灭效应,且随着加入银纳米粒子量的增加荧光猝灭效果逐渐增强。初步探讨了银纳米粒子对诺氟沙星的荧光猝灭机理。     

Continuous synthesis of colloidal silver nanoparticles by electrochemical discharge in aqueous solutions

This article presents an electrochemical discharge (ECD) method that consists of a combination of chemical methods and electric arc discharges. In the method, 140 V is applied to an Ag electrode from a DC power supply. The arc-discharge between the electrodes produces metallic silver nanoparticles and silver ions in the aqueous solution. Compared with the original arc discharge, this ECD method creates smaller nanoparticles, prevents clumping of the nanoparticles, and shortens the production time. The citrate ions also reduce the silver ions to silver nanoparticles. In addition, the citrate ions cap the surface of the produced silver nanoparticles and the zeta potential increases. In this article, the weight loss of the electrodes and the reduction of silver ions to silver nanoparticles as a function of citrate concentration and electric conductivity of the medium are discussed. Furthermore, the properties of the colloidal silver prepared with ECD are analyzed by UV–Vis spectroscopy, dynamic light scattering, electrophoresis light scattering, and scanning electron microscopy. Finally, a continuous production apparatus is presented for the continuous production of colloidal silver.     

Continuous Size Classification of Nanoparticles Utilizing Brownian Motion in Microchannel Size Exclusion Chromatography

This study presents a new method for classifying the sizes of colloidal nanoparticles of below 100 nm in diameter in liquid dispersion using a microchannel size exclusion chromatography (SEC) chip. This chip can classify polydisperse colloidal nanoparticles containing a mix of two monodisperse nanoparticles into several monodisperse particle populations. The particles classified by the SEC chip are then sequentially analyzed by a photon correlation spectroscopy (PCS) method in combination with a flow cell. Two different pillar patterns of such SEC chips were used in experiments to investigate the effects of these patterns on the nanoparticle classification performance. The results obtained were compared with those from a numerical simulation. Standard polystyrene latex particles with diameters of 20 nm and 100 nm were used in this study. The usefulness of this methodology was verified since the simulation and measurement results were in good agreement with each other.     

A sunlight-induced method for rapid biosynthesis of silver nanoparticles using an <Emphasis Type="Italic">Andrachnea chordifolia</Emphasis> ethanol extract

In this study a sunlight-induced method for rapid synthesis of silver nanoparticles using an ethanol extract of Andrachnea chordifolia is described. The silver nitrate solutions (1 mM) containing the ethanol extract of Andrachnea chordifolia were irradiated by both sunlight radiation and by sunlight radiation passed through different colored filters (red, yellow or green). The smallest size of silver nanoparticles was obtained when a silver ion solution was irradiated for 5 minutes by direct sunlight radiation. Further examination of the shape and size and of the surface chemistry of these biogenic silver nanoparticles, which were prepared under sunlight radiation, was carried out using transmission electron microscopy and infrared spectroscopy, respectively. Transmission electron microscopy images show spherical particles with an average size of 3.4 nm. Hydroxyl residues were also detected on the surface of these biogenic silver nanoparticles fabricated using plant extract of Andrachnea chordifolia under sunlight radiation. Our study on the reduction of silver ions by this plant extract in darkness shows that the synthesis process can take place under dark conditions at much longer incubations (48 hours). Larger silver polydispersed nanoparticles ranging in size from 3 to 30 nm were obtained when the silver ions were treated with the ethanol extract of Andrachnea chordifolia under dark conditions for 48 hours.     

Significant modifications in the electrical properties of poly(methyl methacrylate) thin films upon dispersion of silver nanoparticles

Electrical conductivity of thin solid films of PMMA with dispersed silver nanoparticles, synthesized by a novel method, was studied in dark conditions by changing the applied voltage and temperature and also under photoexcitation (by a mercury lamp, 125 W) at room temperature. Anomalous hysteresis in current-temperature characteristics during heating and cooling cycles was observed. The hysteresis-like behaviour was explained on the basis of the movements of molecules associated with different parts of a PMMA matrix and diffusion of silver nanoparticles in the PMMA matrix. Dark current in the PMMA films with dispersed silver nanoparticles has been observed to be higher than the corresponding current in the PMMA films without silver nanoparticles due to the creation of conduction paths by the silver nanoparticles/nanoclusters. The photoresponse in the thin solid films of PMMA with dispersed silver nanoparticles was the reverse of that observed in thin solid films of PMMA without silver nanoparticles. A decrease in photocurrent under illumination of light was observed due to the destruction of conduction paths by the illumination of light.     

银纳米粒子自组织二维有序阵列

采用液液二相转移方法合成出颗粒直径为(4.18±0.5)nm的银纳米粒子溶胶,并用紫外可见光谱对所制得的银纳米粒子溶胶的单分散性和稳定性进行了研究.结果表明,所得到的溶胶相为稳定的、粒径分布窄的单分散体系.红外光谱的分析结果表明,稳定剂1壬基硫醇包缚在银纳米粒子表面.并且,通过自组织方法获得了二维有序的银纳米粒子阵列 关键词： 银纳米粒子 液液二相转移方法 自组织 二维有序阵列