Removal of methyl violet from aqueous solution by perlite

The use of perlite for the removal of methyl violet from aqueous solutions at different concentration, pH, and temperature has been investigated. Adsorption equilibrium is reached within 1 h. The capacity of perlite samples for the adsorption of methyl violet was found to increase with increasing pH and temperature and decrease with expansion and increasing acid-activation. The adsorption isotherms are described by means of the Langmuir and Freundlich isotherms. The adsorption isotherm was measured experimentally at different conditions and the experimental data were correlated reasonably well by the adsorption isotherm of Langmuir. The order of heat of adsorption corresponds to a physical reaction. It is concluded that the methyl violet is physically adsorbed onto the perlite. The removal efficiency (P) and dimensionless separation factor (R) have shown that perlite can be used for removal of methyl violet from aqueous solutions, but unexpanded perlite is more effective.     

Adsorption and desorption of atrazine on carbon nanotubes

The potential impact of carbon nanotubes (CNTs) on human health and the environment is receiving more and more attention. The high surface area of CNTs tends to adsorb a large variety of toxic chemicals, which may enhance the toxicity of CNTs and/or toxic chemicals. In this study, adsorption and desorption of atrazine on carbon nanotubes from aqueous solution were studied through batch reactors. The adsorption equilibrium isotherms were nonlinear and were fitted by Freundlich, Langmuir, and Polanyi-Manes models. It was found that the Polanyi-Manes model described the adsorption process better than other two isotherm models. Together with the "characteristic curve," the Polanyi adsorption potential theory is applicable to describe the adsorption process of atrazine on CNTs. Thermodynamic calculations indicated that the adsorption reaction of atrazine on CNTs is spontaneous and exothermic. The desorption data showed that no significant desorption hysteresis occurred. High adsorption capacity and adsorption reversibility of atrazine on CNTs suggest that CNTs have high health and environmental risks, whereas they have potential applications for atrazine removal from water.     

The evaluation of the possibility of determining the function characterizing the connectedness of pores of various sizes from adsorption measurements

The possibility of determining the function characterizing the connectedness of pores of different types and sizes from the experimental adsorption isotherms is discussed. It is shown that the presence of joints of pores manifests itself by two indications in phase diagrams and adsorption isotherms that contain hysteresis loops. The first indication is related to the appearance of an additional phase transition in the phase diagram and/or a density jump in the isotherm. The second indication is related to different numbers of density jumps in the desorption and adsorption branches of adsorption isotherms. The character of the behavior of the adsorption branch of the isotherm in the case of the presence of regions of joints in a porous system is established.     

Kinetics and equilibrium adsorption study of lead(II) onto activated carbon prepared from coconut shell

Removal of lead from aqueous solutions by adsorption onto coconut-shell carbon was investigated. Batch adsorption experiments were performed to find out the effective lead removal at different metal ion concentrations. Adsorption of Pb2+ ion was strongly affected by pH. The coconut-shell carbon (CSC) exhibited the highest lead adsorption capacity at pH 4.5. Isotherms for the adsorption of lead on CSC were developed and the equilibrium data fitted well to the Langmuir, Freundlich, and Tempkin isotherm models. At pH 4.5, the maximum lead adsorption capacity of CSC estimated with the Langmuir model was 26.50 mg g(-1) adsorbent. Energy of activation (Ea) and thermodynamic parameters such as DeltaG, DeltaH, and DeltaS were evaluated by applying the Arrhenius and van't Hoff equations. The thermodynamics of Pb(II) on CSC indicates the spontaneous and endothermic nature of adsorption. Quantitative desorption of Pb(II) from CSC was found to be 75% which facilitates the sorption of metal by ion exchange.     

Kinetic and isotherm studies of Cu(II) adsorption onto H3PO4-activated rubber wood sawdust

Adsorption of Cu(II) from aqueous solution onto H(3)PO(4)-activated carbon using rubber wood sawdust (RSAC) was investigated in a batch system. Kinetic and isotherm studies were carried out by considering the effects of various parameters, such as initial concentration, contact time, pH, and temperature. The optimal pH value for Cu(II) adsorption onto RSAC was found to be 6.0. Thermodynamic parameters such as standard Gibbs free energy (DeltaG(0)), standard enthalpy (DeltaH(0)), and standard entropy (DeltaS(0)) were evaluated by applying the Van't Hoff equation. The thermodynamics of Cu(II) adsorption onto RSAC indicates its spontaneous and exothermic nature. Langmuir, Freundlich, and Temkin isotherms were used to analyze the equilibrium data at different temperatures. The Langmuir isotherm fits the experimental data significantly better than the other isotherms. Adsorption kinetics data were tested using pseudo-first-order, pseudo-second-order, and intraparticle diffusion models. Kinetic studies showed that the adsorption followed a pseudo-second-order reaction. The initial sorption rate, pseudo-first-order, pseudo-second-order, and intraparticle diffusion rate constants for different initial concentrations were evaluated and discussed. Adsorption mechanism studies revealed that the process was complex and followed both surface adsorption and particle diffusion. The rate-controlling parameter and effective diffusion coefficient were determined using the Reichenberg plot. It was found that the adsorption occurs through film diffusion at low concentrations and at higher concentration the particle diffusion becomes the rate-determining step.     

Water adsorption in disordered mesoporous silica (Vycor) at 300 K and 650 K: a Grand Canonical Monte Carlo simulation study of hysteresis

This numerical simulation paper focuses on the adsorption/desorption of water in disordered mesoporous silica glasses (Vycor-like). The numerical adsorbent was previously obtained by off lattice method, and was shown to reproduce quite well the micro- and mesotextural properties of real Vycor, as well as morphological (pore size distribution) and topological (pore interconnections) disorder. The water-water interactions are described by the SPC model while water-silica interactions are calculated in the framework of the PN-TrAZ model. The water adsorption/desorption isotherms and the configurational energies are calculated by the Grand Canonical Monte Carlo simulation method. The low pressure results compare well with experiments, showing the good transferability of the intermolecular potential. It is shown that if the hysteresis loop observed in the adsorption/desorption isotherm is considered as a true phase transition (which is actually still an open question in the case of disordered porous materials), then it is possible to calculate the grand potential by applying the thermodynamic integration scheme. The grand potential is shown to be multivalued for low (subcritical) temperature, and continuous for high (supercritical) temperature. A coexistence point is found within the hysteresis loop, actually close to the vertical desorption line. Below the equilibrium chemical potential, the gaslike branch is stable whereas the liquidlike branch is metastable. The situation is reversed above the coexistence point.     

The effects of energy sites on adsorption of Lennard-Jones fluids and phase transition in carbon slit pore of finite length a computer simulation study

A Monte Carlo simulation method is used to study the effects of adsorption strength and topology of sites on adsorption of simple Lennard-Jones fluids in a carbon slit pore of finite length. Argon is used as a model adsorbate, while the adsorbent is modeled as a finite carbon slit pore whose two walls composed of three graphene layers with carbon atoms arranged in a hexagonal pattern. Impurities having well depth of interaction greater than that of carbon atom are assumed to be grafted onto the surface. Different topologies of the impurities; corner, centre, shell and random topologies are studied. Adsorption isotherms of argon at 87.3 K are obtained for pore having widths of 1, 1.5 and 3 nm using a Grand Canonical Monte Carlo simulation (GCMC). These results are compared with isotherms obtained for infinite pores. It is shown that the surface heterogeneity affects significantly the overall adsorption isotherm, particularly the phase transition. Basically it shifts the onset of adsorption to lower pressure and the adsorption isotherms for these four impurity models are generally greater than that for finite pore. The positions of impurities on solid surface also affect the shape of the adsorption isotherm and the phase transition. We have found that the impurities allocated at the centre of pore walls provide the greatest isotherm at low pressures. However when the pressure increases the impurities allocated along the edges of the graphene layers show the most significant effect on the adsorption isotherm. We have investigated the effect of surface heterogeneity on adsorption hysteresis loops of three models of impurity topology, it shows that the adsorption branches of these isotherms are different, while the desorption branches are quite close to each other. This suggests that the desorption branch is either the thermodynamic equilibrium branch or closer to it than the adsorption branch.     

Controlled adsorption of cellulase onto pretreated corncob by pH adjustment

The effective recycling of cellulase requires an in-depth understanding of cellulase adsorption and desorption. In the present study, we examined the adsorption behaviors and stabilities of cellulase at different pH values. Acidic pH (<4.8) was found to favor adsorption, whereas neutral and alkaline pH (especially pH 7 and 10) favored desorption. The influence of pH on cellulase activity was temperature dependent. Under mild conditions (e.g., pH 7 and 25 °C), the effect of pH on cellulase activity was reversible, and the cellulase activity can return to almost 100% by adjusting the pH value to 4.8. However, under severe conditions (e.g. pH 10 and 50 °C), irreversible inactivation may take place. We also explored the roles of pH and temperature in cellulase adsorption kinetics and isotherms. At pH 4.8, temperature had no remarkable effect on the adsorption capacity of the cellulases onto substrate. However, at pH 7 and 10, high temperatures lead to more cellulase desorption. Only at pH 4.8 does cellulase adsorption well fit (R ² > 0.96) the pseudo-first-order kinetic and Langmuir adsorption isotherm (R ² > 0.99) models.     

The Removal of Victoria Blue from Aqueous Solution by Adsorption on a Low-Cost Material

The use of perlite for the removal of victoria blue from aqueous solution at different concentration, ionic strength, pH and temperature has been investigated. Adsorption process is attained to the equilibrium within 1 h. It is found that the adsorption capacity of perlite samples for the removal of victoria blue increased by increasing pH and temperature, and decreased by expansion and ionic strength. The adsorption isotherms are described by means of the Langmuir and Freundlich isotherms. The adsorption isotherm was measured experimentally at different conditions, and the experimental data were correlated reasonably well by the adsorption isotherm of the Langmuir, and the isotherm parameters (Q _m and K) have been calculated for perlite samples as well. It is concluded that victoria blue is physically adsorbed onto the perlite. The removal efficiency (P) and dimensionless seperation factor (R) have shown that perlite can be used for removal of victoria blue from aqueous solutions, but unexpanded perlite is more effective.     

Adsorption of crystal violet dye from aqueous solution using mesoporous materials synthesized at room temperature

In this work, batch adsorption experiments are carried out for crystal violet dye using mesoporous MCM-41 synthesized at room temperature and sulfate modified MCM-41 prepared by impregnation method using H₂SO₄ as sulfatising agent. The surface characteristics, pore structure, bonding behavior and thermal degradation of both the MCM-41 samples are characterized by nitrogen adsorption/desorption isotherms, X-ray diffraction (XRD) patterns, Fourier transform infrared (FT-IR) spectroscopy and thermo gravimetric analysis (TGA). The adsorption isotherm, kinetics and thermodynamic parameters are investigated for crystal violet (CV) dye using the calcined and sulfated MCM-41. Results are analysed using Langmuir, Freundlich and Redlich-Peterson isotherm models. It is found that the Freundlich model is an appropriate model to explain the adsorption isotherm. The highest adsorption capacity achieved is found to be 3.4×10⁻⁴ mol g⁻¹ for the sulfated MCM-41. The percentage removal of crystal violet dye increases with increase in the pH for both the MCM-41 adsorbents. Kinetics of adsorption is found to follow the second-order rate equation. From the thermodynamic investigation, it is evident that the adsorption is exothermic in nature.     

Potato peels as solid waste for the removal of heavy metal copper(II) from waste water/industrial effluent

A new sorbent potato peels, which are normally discarded as solid waste for removing toxic metal ion Cu(II) from water/industrial waste water have been studied. Potato peels charcoal (PPC) was investigated as an adsorbent of Cu(II) from aqueous solutions. Kinetic and isotherm studies were carried out by studying the effects of various parameters such as temperature, pH and solid liquid ratios. The optimum pH value for Cu(II) adsorption onto potato peels charcoal (PPC) was found to be 6.0. The thermodynamic parameters such as standard Gibb's free energy (Delta G degrees ), standard enthalpy (Delta H degrees ) and standard entropy (DeltaS degrees ) were evaluated by applying the Van't Hoff equation. The thermodynamics of Cu(II) adsorption onto PPC indicates its spontaneous and exothermic nature. The equilibrium data at different temperatures were analyzed by Langmuir and Freundlich isotherms.     

Separation and Determination of Trace Amounts of Thallium by Nano-TiO2 Combined with Microwave Irradiation

Nano-TiO2 was employed for the separation and preconcentration of thallium.It was found that the adsorption ratio of thallium ions was more than 98% at pH 4.5 and the desorption ratio reached 99% under microwave irradiation for 3 min at 350 W.The adsorption equilibrium was well described by the Langmuir isotherm model with a maximum adsorption capacity of 4.09 mg/g[(20±0.1) °C].The nano-TiO2 was successfully applied to the determination of element thallium in the certified reference material polymetallic nodule and water samples.     

Biosorption of nickel(II) and copper(II) ions from aqueous solution by Streptomyces coelicolor A3(2)

The biosorption of nickel(II) and copper(II) ions from aqueous solution by dried Streptomyces coelicolor A3(2) was studied as a function of concentration, pH and temperature. The optimum pH range for nickel and copper uptake was 8.0 and 5.0, respectively. At the optimal conditions, metal ion uptake was increased as the initial metal ion concentration increased up to 250 mg l(-1). At 250 mg l(-1) copper(II) ion uptake was 21.8% whereas nickel(II) ion uptake was found to be as high as 7.3% compared to those reported earlier in the literature. Metal ion uptake experiments were carried out at different temperatures where the best ion uptake was found to be at 25 degrees C. The characteristics of the adsorption process were investigated using Scatchard analysis at 25 degrees C. Scatchard analysis of the equilibrium binding data for metal ions on S. coelicolor A3(2) gave rise to a linear plot, indicating that the Langmuir model could be applied. However, for nickel(II) ion, divergence from the Scatchard plot was evident, consistent with the participation of secondary equilibrium effects in the adsorption process. Adsorption behaviour of nickel(II) and copper(II) ions on the S. coelicolor A3(2) can be expressed by both the Langmuir and Freundlich isotherms. The adsorption data with respect to both metals provide an excellent fit to the Freundlich isotherm. However, when the Langmuir isotherm model was applied to these data, a good fit was obtained for the copper adsorption only and not for nickel(II) ion.     

Adsorption of humic acid from aqueous solutions on crosslinked chitosan-epichlorohydrin beads: kinetics and isotherm studies

The adsorption of humic acid on crosslinked chitosan-epichlorohydrin (chitosan-ECH) beads was investigated. Chitosan-ECH beads were characterized by Fourier transform infrared spectroscopy (FTIR), surface area and pore size analyses, and scanning electron microscopy (SEM). Batch adsorption experiments were carried out and optimum humic acid adsorption on chitosan-ECH beads occurred at pH 6.0, agitation rate of 300 rpm and contact time of 50 min. Adsorption equilibrium isotherms were analyzed by Langmuir and Freundlich models. Freundlich model was found to show the best fit for experimental data while the maximum adsorption capacity determined from Langmuir model was 44.84 mg g(-1). The adsorption of humic acid on chitosan-ECH beads was best described with pseudo-first-order kinetic model. For desorption study, more than 60% of humic acid could be desorbed from the adsorbent using 1.0M HCl for 180 min.     

Adsorption of Cu(II) from aqueous solution by anatase mesoporous TiO2 nanofibers prepared via electrospinning

Anatase mesoporous titanium nanofibers (m-TiO(2) NFs) have been synthesized from calcination of the as-spun TiO(2)/polyvinyl pyrrolidone (PVP)/pluronic123 (P123) composite nanofibers at 450 °C in air for 3h. The structures and the physicochemical properties of m-TiO(2) NFs are characterized by scanning electron microscopy, X-ray diffraction, nitrogen adsorption-desorption isotherm analysis, and determination point of zero charge, respectively. An investigation of Cu(II) adsorption onto m-TiO(2) NFs has been studied in this research. The pH effect, adsorption kinetics, and adsorption isotherms are examined in batch experiments. Experimental data were analyzed using pseudo-first order and pseudo-second order kinetic models. It was found that adsorption kinetics were the best fitting by a pseudo-second order kinetic model. The optimum pH for Cu(II) adsorption was found to be 6.0. The equilibrium data were analyzed by the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherm models, which revealed that the Freundlich isotherm is the best-fit isotherm for the adsorption of Cu(II). Compared to the TiO(2) NFs (regular anatase titanium nanofibers) in the same experimental conditions to elucidate the role of the mesoporous structure of m-TiO(2) NFs, experimental results showed that the m-TiO(2) NFs had a better adsorption capacity for Cu(II) due to its higher surface area.     

Preparation and characterization of nanocomposite,silica aerogel,activated carbon and its adsorption properties for Cd (II) ions from aqueous solution

A novel composite adsorbent, silica aerogel activated carbon was synthesized by sol-gel process at ambient pressure drying method. The composite was characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and Nitrogen adsorption/desorption isotherms (BET).In the present study, the mentioned adsorbent was used moderately for the removal of cadmium ions from aqueous solutions and was compared with two other adsorbents of cadmium, activated carbon and silica aerogel. The experiments of Cd adsorption by adsorbents were performed at different initial ion concentrations, pH of the solution, adsorption temperature, adsorbent dosage and contact time. Moreover, the optimum pH for the adsorption was found to be 6.0 with the corresponding adsorbent dosage level of 0.1 g at 60 °C temperature. Subsequently, the equilibrium was achieved for Cd with 120 min of contact time.Consequently, the results show that using this composite adsorbent could remove more than 60% of Cd under optimum experimental conditions. Langmuir and Freundlich isotherm model was applied to analyze the data, in which the adsorption equilibrium data were correlated well with the Freundlich isotherm model and the equilibrium adsorption capacity (q_e) was found to be 0.384 mg/g in the 3 mg/L solution of cadmium.     

Lindane Adsorption-Desorption on Chitin in Sea Water

Abstract

The adsorption and desorption processes by solid materials are important in determining the movement and fate of pesticide compounds in aquatic systems. Chitin is one of the constituents of natural organic matter and may serve as a model organic phase for studying the pesticide adsorption-desorption in marine systems. The lindane adsorption-desorption to chitin has been studied as a function of chitin concentration (2.5 gl^?1 to 12.5 gl^?1), temperature (5 to 45°C), pH (1.5 to 8) and salinity (15‰ to 36‰). Both, Freundlich and linear isotherms for the adsorption and desorption processes were used to represent the experimental data. Two-site Langmuir isotherm can describe well the measured sorption isotherm. The adsorbent-concentration effect and the adsorption-desorption hysteresis show the existence of different classes of site with different accessibility. Thus, the adsorption-desorption reaction of lindane is the result of more than a single mechanism. An increase in temperature (ΔH = ?4.0 ± 0.7 Kcal mol^?1) and a decrease in salinity resulted in both lower lindane adsorption and in a more reversible process. An increase of pH resulted in lower adsorption partition coefficients.     

Adsorption characteristics of poly(styrene-co-divinylbenzene) resin functionalized with methoxy and phenoxy groups for phenol

Two macroporous crosslinked poly(styrene-co-divinylbenzene) resins functionalized with methoxy and phenoxy groups, PVBME and PVBPE were prepared and their adsorption characteristics for phenol were studied in hexane as well as in aqueous solution. It was shown that the equilibrium adsorption capacity of phenol onto PVBPE was a little larger than that onto PVBME at the same temperature and equilibrium concentration. The adsorption onto PVBME in hexane can be correlated to Langmuir isotherm model, whereas the semi-empirical Freundlich isotherm model characterized the adsorption onto PVBPE better. The adsorption thermodynamic parameters were calculated and it was found that the adsorption enthalpy, adsorption free energy, and adsorption entropy were all negative, and the adsorption thermodynamic parameters onto PVBPE were more negative than the corresponding ones onto PVBME. The relationship of the adsorption capacity with the equilibrium concentration was linear in aqueous solution. The adsorption was hypersensitive to the solution pH in aqueous solution, and the optimum pH was determined to be 6.0. The adsorption dynamics of phenol onto PVBPE in aqueous solution was investigated and it was seen that the adsorption can be well fitted by the pseudo-first-order rate equation.     

Kinetics and equilibrium studies of adsorption of chromium(VI) ion from industrial wastewater using Chrysophyllum albidum (Sapotaceae) seed shells

A new biosorbent has been prepared by coating Chrysophyllum albidum (Sapotaceae) seed shells with chitosan and/or oxidizing agents such as sulfuric acid. This study investigated the technical feasibility of activated and modified activated C. albidum seed shells carbons for the adsorption of chromium(VI) from aqueous solution. The sorption process with respect to its equilibria and kinetics as well as the effects of pH, contact time, adsorbent mass, adsorbate concentration and particle size on adsorption was also studied. The most effective pH range was found to be between 4.5 and 5 for the sorption of the metal ion. The pseudo-first-order rate equation by Lagergren and pseudo-second-order rate equation were tested on the kinetic data, the adsorption process followed pseudo-second-order rate kinetics, also, isotherm data was analyzed for possible agreement with the Langmuir and Freundlich adsorption isotherms, the Freundlich and Langmuir models for dynamics of metal ion uptake proposed in this work fitted the experimental data reasonably well. However, equilibrium sorption data were better represented by Langmuir model than Freundlich. The adsorption capacity calculated from Langmuir isotherm was 84.31, 76.23 and 59.63 mg Cr(VI)/g at initial pH of 3.0 at 30 °C for the particle size of 1.00–1.25 mm with the use of 12.5, 16.5 and 2.1 g/L of CACASC, CCASC and ACASC adsorbent mass, respectively. This readily available adsorbent is efficient in the uptake of Cr(VI) ion in aqueous solution, thus, it could be an excellent alternative for the removal of heavy metals and organic matter from water and wastewater.     

染料壳聚糖微球的制备及其对人血清白蛋白吸附性能研究

人血清白蛋白(Human Serum Albumin,HSA)是血浆中含量最丰富的蛋白质,约占血浆总蛋白的60%.在人体内,HSA有许多重要的生理功能[1],临床上广泛应用于手术输血和危重病人补液,治疗创伤休克、烧伤、水肿和低白蛋白血症等,而且能增强人体抵抗能力,是迄今为止产量最大、临床用量最大