Synthesis and Surface Activity of Novel Triazole—based Cationic Gemini Surfactants

Gemini surfactants, which contain two hydrophilic groups and two hydrophobic groups in the molecule, are considered as a new generation of surfactants. These surfactants are about 3 orders of magnitude more efficient at reducing surface tension and more than 2 orders of magnitude more efficient at forming micelles than conventional surfactants1. During recent years, many gemini surfactants have been synthesized, and a considerable number of investigations have been reported on their unusua…     

Synthesis and Properties of Gemini Cationic Surfactants with Amide Spacers

Four gemini cationic surfactants {N,N‘-di[2-(lauryldimethylamino)acetyl]polymethylenediamine dichloride, LAA-s-LAA, s = 2,3,4,6 } were synthesized by using four bis (a-chloroacetamide)s and N, N-dimethyl-laurylamine, respectively. The molecular structures were characterized by means of IR, ^1H NMR. ^13C NMR and MS, and the behavior of their aqueous solutions was studied. The critical micell concentrations (CMC) of LAA-s-LAA were one order of magnitude lower than that of dodecyltrimethyl ammonium chloride (DTAC). With the change of the length of spacer chain(s), their CMC values change, and CMC reaches the top value at s=4.     

Adsorption and Micellization Properties of Novel Heterodouble‐Chained N‐Acyltaurate Surfactants

A set of heterodouble‐chained N‐acyltaurate surfactants (abbreviated as m+nP‐T, where m and n were carbon numbers of alkyl chain; P was phenyl; T was taurate) were synthesized. The novel amphiphiles contained sodium taurine as hydrophilic moiety and two different hydrocarbon chains as hydrophobic moiety. One was a long alkyl chain, and the other had an aromatic residue. Their surface properties were determined by Wilhelmy‐plate method, and micellization properties were investigated by fluorescence spectra of extrinsic probe and intrinsic probe. It was found that these surfactants showed some aberrant properties. It was difficult to obtain the equilibrium surface tension and critical micelle concentration (cmc) for the surfactants with two long chains. Pyrene was solubilized in micelle at concentration above cmc, and the fluorescent intensity ratio of the first vibronic peak (373 nm) to the third vibronic peak (383 nm) of pyrene decreased gradually. The aggregation number N, characterized by quenching the phenoxyl residue with methyl viologen (MV²⁺) as the extrinsic quencher, gradually increased with increasing surfactant concentration. These indicated that more and more molecules packed in a micelle with increasing concentration.     

ESR Studies on the Micellization Behaviors of a Series of Novel Asymmetric Gemini Surfactants

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ ,ｂｉｓ(ｑｕａｔｅｒｎａｒｙａｍｍｏｎｉｕｍ)ｓｕｒｆａｃ ｔａｎｔｓｏｒｇｅｍｉｎｉｓｕｒｆａｃｔａｎｔｓ ,ｉｎｗｈｉｃｈｔｗｏｃａｔｉｏｎｉｃｓｕｒｆａｃ ｔａｎｔｍｏｉｅｔｉｅｓａｒｅｃｏｎｎｅｃｔｅｄｗｉｔｈｔｈｅａｍｍｏｎｉｕｍｈｅａｄｇｒｏｕｐｂｙａｐｌｏｙｍｅｔｈｙｌｅｎｅｃｈａｉｎ ,ｎａｍｅｌｙ ,ａｓｐａｃｅｒｈａｖｅｂｅｃｏｍｅｏｆｉｎｔｅｒｅｓｔｄｕｅｔｏｔｈｅｉｒｅｘｃｅｐｔｉｏｎａｌｓｕｒｆａｃｅａｃｔｉｖｉｔｙａｎｄｒｅｍ…     

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (2): Aggregation Behavior

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in the aqueous solution were investigated by surface tension, rheology, and dynamic light scattering measurements. It was shown that the key‐lock interactions between β‐CD and mixed cationic‐anionic surfactants were stronger than the electrostatic/hydrophobic interactions between cationic and anionic surfactants. The inclusion of β‐CD to surfactants could destroy the ion‐pair and aggregates of cationic‐anionic surfactants, and even inhibited the precipitation of the mixed cationic‐anionic surfactants. Furthermore, the inclusion of β‐CD to surfactants could also destroy the hydrogen bond between β‐CD molecules, inducing the disassociation of the aggregation formed by β‐CD themselves.     

Biphasic Catalytic Hydroformylation of 1-Dodecene in Micellar System with Cationic Gemini Surfactants

The promotion effect of cationic gemini surfactants for the hydroformylation of 1-dodecene in the organic/aqueous biphasic catalytic system is reported. The hydroformylation reaction in the presence of gemini surfactant occurred with higher turnover frequency and higher selectivity for linear aldehyde than using conventional monomeric surfactant CTAB.     

Microstructures of Aqueous Two‐Phase Systems Formed by Mixture of Polymer and Cationic‐Anionic Surfactants

Microstructure and phase behavior of decyltriethylammonium bromide (C₁₀NE)/sodium decylsulfonate (C₁₀SO₃)/poly(ethylene oxide) (PEO)/water quaternary systems were studied by freeze‐fracture transmission electron microscopy, small angle X‐ray diffraction, and dynamic light scattering methods. Aqueous two‐phase systems (ATPS) could be prepared by properly mixing the aqueous solution of PEO and equimolar mixed C₁₀NE and C₁₀SO₃. It was shown that the top phase of the ATPS was surfactant‐enriched and mainly composed of multi‐lamellar structure, while the bottom phase of the ATPS was polymer‐enriched in which some vesicles were observed.     

Mixed Micellization and Interfacial Properties of Nonionic Surfactants with the Phenothiazine Drug Promazine Hydrochloride at 30 °C

In the present work, the micellization and adsorption behaviors of mixed systems containing an amphiphilic phenothiazine drug, promazine hydrochloride (PMZ) and nonionic surfactants in aqueous media at different mole fractions of nonionic surfactants (?? ₁) were investigated at 30?°C by surface tension measurements. The critical micelle concentrations of the mixtures fall between the values of the individual components, which indicates nonideal mixing. With Tritons the interactions are repulsive at low mole fractions. At high ?? ₁ the mixing becomes almost ideal. On the basis of regular solution theory, the micellar mole fractions of surfactants ( $X_{1}^{m}$ ) and interaction parameter (?? ^m ) were evaluated, while their interfacial mole fractions ( $X_{1}^{\sigma} $ ) and interaction parameters at the interface (?? ^?? ) were calculated using Rosen??s model. The results indicate that the surfactant??s contribution is greater than that of the drug both at the interface and in micelles. The short and rigid hydrophobic structure of the drug resists its participation in micelle formation more than in the monolayer, leading to $X_{1}^{m}<X_{1}^{\sigma}$ . Values of the surface excess (?? _max) and minimum area per head group (A _min) indicate attractive interactions. ?? _max increases and A _min decreases as the surfactant mole fraction increases.     

Synthesis and Properties of Novel Cationic Maleic Diester Polymerizable Surfactants

The surfactants used in the emulsion polymerization can be thereafter the source of many problems for the application, such as adhesives and coatings. To overcome these negative aspects essentially related to their mobility in the final polymer, surfactants can be covalently linked to the particle surface through incorporation into the polymer chains. Recent years, polymerizable surfactants (surface active monomer or surfmer) are widely reported and used in the emulsion polymerization, many po…     

Adsorption and Aggregation Behavior in Aqueous Solution of Tetrasiloxane-based Carboxylate Surfactants via “Thiol-ene” Photochemical Reaction

Anionic silicone surfactants have long been a neglected field. In this paper three anionic silicone surfactants were synthesized first time from dichloromethylvinylsilane through hydrolysis-condensation, “thiol-ene” photo- chemical and then salting reaction. The critical aggregate concentration (CAC), surface tension, minimum surface area per surfactant molecule and surface pressure at CAC were studied by both surface tension and electrical conductivity. The results showed that they had significant surface activity at the gas/liquid interface and were capable to reduce the surface tension of water to approximately 20 mN m⁻¹. The results of transmission electron microscopy showed that the three silicone surfactants self-assembled into spherical aggregates of uniform size in aqueous solution above the CAC. The dynamic light scattering results demonstrated that the size of the aggregates was determined to be in the range from 60 to 300 nm at 0.05 mol L⁻¹ and the order of the size of the aggregates is (Me₃SiO)₃SiCO₂Li<(Me₃SiO)₃SiCO₂Na<(Me₃SiO)₃SiCO₂K.     

Spontaneous Vesicle Formation in Mixed Aqueous Solution of Poly-tailed Cationic and Anionic Surfactants

Spontaneous vesicles from the mixed queous solution of poly-talied cationic surfactant PTA and anionic surfactant AOT are firstly obtained.Vesicle formation and characterizations are demonstrated by negative-staining TEM and dynamic light scattering.A monodisperse vesicle system is obtained with a polydispersity of 0.082.Ultrasonication can promote the vesicle formation,Mechanism of vesicle formation is discussed from the viewpoint of molecular interaction.     

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (1): Thermodynamic Study

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in aqueous solution were investigated by surface tension and ¹H NMR measurements. It was shown that the critical micelle concentration (cmc) increased linearly with the increase of β‐CD concentration. Furthermore, β‐CD formed 1∶1 inclusion complex with both cationic and anionic surfactants in the mixed surfactant systems, and no significant selective inclusion was observed. The thermodynamic parameters of the inclusion process of β‐CD to mixed cationic‐anionic surfactants were calculated by a numerical method based on the surface tension measurements, and it was found that the inclusion process was both enthalpy and entropy favorable.     

Phase Behavior of n‐Butanol/n‐Octane/Water/Cationic Gemini Surfactant System

Phase diagrams of the n‐butanol/n‐octane/water/(12‐3‐12,2Br^?1) system were determined, where n‐octane usually represents oil (O), 12‐3‐12,2Br^?1 is a gemini cationic surfactant trimethylene‐1,3‐bis(dodecyldimethyl ammonium bromide) abbreviated as S, and n‐butanol is a co‐surfactant written as A. Effects of the weight ratio of gemini surfactant to cosurfactant, S/A, and of temperature on the phase behavior were studied. The microemulsion structures including O/W, bi‐continuous (B.C.), W/O, and liquid crystal were determined by the conductivity method and polarization measurement. Experimental results show that the gemini surfactant, used facilitates the formation of microemulsions compared with its corresponding monomeric surfactant, n‐dodecyl trimethylammonium bromide (DTAB). When S/A=1/1, and the total concentration of gemini surfactant and alcohol is 20–40%, microemulsions with higher water content can form in a wider region. When the temperature increases, the size and position of each type of microemulsion region changes notably.     

One Convenient Preparation and Characterization of a New Amphiphilic Cationic Cyclodextrin Derivative 2-O-(Hydroxypropyl-N,N-Dimethyl-N-Dodecylammonio)-β-Cyclodextrin

A new amphiphilic cyclodextrin derivative 2-O-(hydroxypropyl-N,N-dimethyl-N-dodecylammonio)-β-cyclodextrin (2-HPDMDA-β-CD) was prepared and characterized by surface tension, electrical conductivity, dynamic light scattering, transmission electron microscopy (TEM) and steady-state fluorescence. 2-HPDMDA-β-CD was found to be a fine surfactant with a smaller critical micelle concentration (1.21 mM) value than that of dodecyltrimethylammonium chloride. TEM showed that 2-HPDMDA-β-CD could form two kinds of spherical aggregates in solution. The smaller one showed little concentration dependence while the larger one showed relatively strong concentration dependence. 2-HPDMDA-β-CD could be a fine host compound in molecular recognition with two functional spaces of the cyclodextrin cavity and micelles.     

Effect of Cationic and Zwitterionic Surfactants on Contact Angle of Quartz–Water–Crude Oil System

The influences of four cationic surfactants hexadecyl glycidyl ether ammonium chloride and four zwitterionic surfactants hexadecyl glycidyl ether glycine Betaine solutions on contact angle of crude oil on a quartz surface were investigated using a captive drop method. The effects of surfactant type, structure, and concentration on contact angle were expounded. From obtained results it appears that the adsorbed surfactant at oil–water interface reduces the interfacial tension and the adsorption at quartz–water interface improves interfacial free energy, which results in reducing the stable value of contact angle and weakening dynamic behavior. At high concentration, the zwitterionic surfactant with branched-chain may form semi-micelle at quartz surface. As a result, the stable value of contact angle passes through a sharp minimum with the increasing concentration.     

The Adsorption Behavior of Lithium Cationon Polyacene and Its Influenceon Conductive Property

ＴｈｅＡｄｓｏｒｐｔｉｏｎＢｅｈａｖｉｏｒｏｆＬｉｔｈｉｕｍＣａｔｉｏｎｏｎＰｏｌｙａｃｅｎｅａｎｄＩｔｓＩｎｆｌｕｅｎｃｅｏｎＣｏｎｄｕｃｔｉｖｅＰｒｏｐｅｒｔｙＳＵＺｈｏｎｇ－ｍｉｎ，ＷＡＮＧＲｏｎｇ－ｓｈｕｎ，ＪＩＡＮＧＸｉａｏ－ｄｏｎｇＳＨＩ...     

Preparation,Characterization and Drug Release Behavior of 5-Fluorouracil Loaded Carboxylic Poly(ε-caprolactone) Nanoparticles

In this paper, 5-Fluorouracil (5-FU) loaded carboxylic poly(ε-caprolactone) nanoparticles have been prepared by emulsification/solvent evaporation o/w method, and the drug release behaviors of 5-FU were investigated. The novel carboxylic poly (ε-caprolactone) (P(CL-OPD)-mal) was synthesized via conjugation of maleic anhydride to sodium borohydride (NaBH₄) reduced poly(ε-caprolactone-co -4- carbonyl -ε-caprolactone) (P(CL-OPD)), while P(CL-OPD) was synthesized in bulk by ring-opening polymerization of ε-caprolactone and 4-carbonyl-ε-caprolactone (OPD) with stannous octoate as a catalyst. Their structures were confirmed by ¹HNMR, FT-IR and GPC. Dynamic light scattering (DLS), transmission electron microscopy (TEM), zeta potential measurements were used for nanoparticle characterization. TEM and DLS showed the nanoparticles were with spherical shape and uniform size distribution (mean diameter 70～100 nm), respectively. Zeta potential analysis revealed that the nanoparticles had an increased negative surface with the increase of carboxyl group concentration. UV spectroscopy was adopted to study the entrapment and release behaviour. The maximum 5-FU loading efficiency was 14.39% with the entrapment efficiency be 42%. In vitro release studies were performed in PBS at 37°C. Results of the study showed that the release behavior can be well-controlled, and the balanced release was up to 96 h. P(CL-OPD)-mal nanoparticles would provide increased benefit in biomedical and pharmaceutical applications.