Chelation ion-exchange properties of salicylic acid-urea-formaldehyde copolymers

Chelation ion-exchange properties of copolymers prepared from salicylic acid, urea and formaldehyde by condensation in presence of acid catalyst were studied for Cu²⁺, Fe³⁺, UO²⁺, Mn²⁺,Zn²⁺ and Co²⁺ ions. A batch equilibration method was adopted to study the selectivity of metal ion uptake. This method involved the measurement of distribution of a given metal between the copolymer sample and a solution containing the metal ions. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymer showed a higher selectivity for UO₂ ²⁺, Cu²⁺ and Fe³⁺ ions than Mn²⁺, Co²⁺ and Zn²⁺ ions.     

Synthesis,characterization, and application of helical polymers

This review mainly describes the asymmetric synthesis of optically active polymers with helical conformation. Bulky methacrylates such as triphenylmethyl methacrylate and 1-phenyldibenzosuberyl methacrylate give one-handed helical and optically active polymers with almost perfectly isotactic main chain conformation by polymerization with chiral anionic initiators. The radical polymerization and copolymerization of these monomers under chiral conditions also afford optically active polymers with prevailing one-handed helicity. N, N-Disubstituted acrylamides also give optically active, helical polymers in the asymmetric anionic polymerization. Optically active polyisocyanates with a prevailing one-handed helical structure have been prepared in the copolymerization of an achiral isocyanate with a small amount of an optically active isocyanate and also in the polymerization of alkyl and aromatic isocyanates with optically active lithium alkoxide or amide compounds. The existence of a stable helical structure for polychloral has been successfully proved with the helical oligomers of chloral. One-handed helical polyisocyanides have been prepared by helix-sense-selective polymerization of bulky isocyanides and also by the cyclopolymerization of a 1, 2-diisocyanobenzene derivative with the Pd complex of a one-handed helical oligomer.     

Synthesis and characterization of ion-exchangeable titanate nanotubes

Titanate nanotubes were synthesized under hydrothermal conditions. The optimized synthesis (100-180 degrees C, longer than 48 h), thermal and hydrothermal stability, ion exchangeability and consequent magnetic and optical properties of the titanate nanotubes were systematically studied in this paper. First, nanotubes with monodisperse pore-size distribution were prepared. The formation mechanism of the titanate nanotubes was also studied. Second, the thermal and hydrothermal stability were characterized with X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared (FTIR), and Raman spectroscopy. Results showed that sodium ions played a significant role in the stability of the frameworks. Third, the selective ion exchangeability was demonstrated with a series of ions. The ion substitution also enlarged the BET surface area of the titanate nanotubes to 240 m(2) x g(-1). Combination of these two features implied that these nanotubes might be functionalized by substitution of different transitional-metal ions and consequently used for selective catalysis. Magnetism, photoluminescence, and UV/Vis spectra of the substituted titanate nanotubes revealed that the magnetic and optical properties of the nanotubes were modifiable.     

Synthesis and characterization of polyurethane microspheres and their application for immobilization of maltogenase

A series of polyurethane (PU) microspheres, based on 4,4′‐diphenylmethane diisocyanate and 1,4‐butanediol or a mixture of 1,4‐butanediol and polyether glycol (M = 1400) were synthesized by a one‐step method. The obtained PU microspheres were characterized by infrared spectroscopy, polarizing optical microscopy and dynamic thermogravimetry. Morphology studies of PU microspheres revealed that the material consists of spherical particles with relatively narrow particle size distribution in the range 1–100 µm and preferably between 10 to 50 µm; the obtained polymers were thermally stable up to 533–573 K. Maltogenase from Bacillus stearothermophilus was immobilized onto PU microspheres, synthesized using different ratios of components. High yield (about 100%) and efficiency (over 100%) of immobilization were obtained. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of LiAlTiO4 and its selectivity to Li+ exchange

The ion-exchanger LiAlTiO₄ of spinel type was prepared by the common precipitation/hydrothermal crystallization method, and was acid-modified. Its ion-exchange properties for alkali ions such as saturation capacity of exchange, distribution coefficient and pH titration curve were determined. LiAlTiO₄ was characterized by the X-ray diffraction method. The acid treatment of LiAlTiO₄ caused Li⁺ extraction ratio to change from 28% to 72%, while the dissolution of Al is less than 6.8%. This inorganic ion-exchanger (LiAlTiO₄-700) has a higher saturation capacity of exchange for Li than for other alkali ions, the saturation capacity of exchange for Li⁺ reaches 4.29 mmol/g (30.03 mg/g); LiAlTiO₄-700(H) has a higher selectivity of ion exchange for Li⁺ than for other alkali ions. These results show LiAlTiO₄-700(H) has better memory and selectivity of ion exchange, and higher capacity of ion exchange for Li⁺. It is a kind of prospective ionic sieve for Li⁺. __________ Translated from Chinese Journal of Applied Chemistry, 2005, 22 (7) (in Chinese)     

Synthesis,characterization of new bisphenol-based benzoxazines and the thermal properties of their polymers

Journal of Thermal Analysis and Calorimetry - New bisphenol-based benzoxazines (BBA-a and BBA-bra) were synthesized from bisphenol containing trityl group, paraformaldehyde, aniline and...     

Synthesis and characterization of a polymerizable benzophenone derivative and its application in styrenic polymers as UV-stabilizer

In this paper, a polymerizable UV-stabilizer 2-hydroxy-4-(3-methacryloxy-2-hydroxylpropoxy) benzophenone (BPMA) was synthesized by the reaction of 2,4-dihydroxybenzophenone (UV-0) and glycidyl methacrylate (GMA), and characterized by ultraviolet-visible absorption spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR). The results show that BPMA, with high UV-absorbing performance, has been synthesized successfully. Poly(St-co-BPMA) was prepared by emulsion copolymerization of styrene (St) and BPMA, and tested by ¹H NMR, UV-Vis, gel permeation chromatography (GPC) and differential scanning calorimeter (DSC). The results reveal that BPMA had been added to the polymer chain as copolymer and the UV-resistant performance of poly(St-co-BPMA) was enhanced significantly by the incorporation of BPMA onto the polymer chains. Poly(St-co-BPMA) was irradiated under UV light and insoluble substance, reduced viscosity, weight loss and UV-Vis absorption spectra were used to determine the degradation of poly(St-co-BPMA). The results show that BPMA is an effective UV-stabilizer in protecting poly(St-co-BPMA) from UV destroys. We also take water extraction test on poly(St-co-BPMA), PSt/UV-0 blends, and the results show that migration problem can be resolved by anchoring the UV-stabilizer onto the polymer chain.     

Synthesis of novel ionic polymers containing arsonic acid group

Synthesis of ortho‐ and para‐acryloylaminophenylarsonic acids (o‐AAPHA and p‐AAPHA) monomers and their homopolymers, useful as ion‐exchange materials, are reported. Both the monomers and homopolymers are synthesized with >90% yield. The structures of the new compounds are determined by NMR and FTIR spectroscopy. Molecular weights of the polymers are determined from light scattering measurements and found to be M_w = 38,759 g/mol for o‐AAPHA polymer and M_w = 31,347 g/mol for p‐AAPHA polymer. Good thermal stability of the new compounds derived from their intra‐ or intermolecular hydrogen bondings suggests their applications as proton‐exchange membrane at high temperatures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1627–1634, 2006     

LiAlTiO4的合成及对Li+的离子交换选择性

LiAlTiO4的合成及对Li+的离子交换选择性;复合氧化物;锂;离子交换;无机离子交换剂;尖晶石结构     

Synthesis and characterization of aminocellulose sulfates as novel ampholytic polymers

Amino cellulose sulfate (ACS); namely 6-deoxy-6-(ω-aminoethyl) amino cellulose-2,3(6)-O-sulfate (AECS) and 6-deoxy-6-(2-(bis-N′,N′-(2-aminoethyl)aminoethyl)) amino cellulose-2,3(6)-O-sulfate (BAECS) were prepared by a three step synthesis starting with the functionalization of microcrystalline cellulose with p-toluenesulfonyl (tosyl) groups (degree of substitution, DS_Tos between 0.55 and 1.37). Subsequently the introduction of the sulfate moieties was carried out (DS_Sulf between 1.09 and 1.27) and the tosyl groups at position 6 were replaced by a nucleophilic substitution reaction. As nucleophilic agents 1,2-diaminoethane and tris-(2-aminoethyl)amine were applied, yielding AECS (DS_AEA values between 0.41 and 0.86) and BAECS (DS_BAEA values between 0.32 and 0.74), respectively. The ACS samples were characterized by means of elemental analysis, ¹³C-NMR-, FT-IR-, and UV–Vis spectroscopy. Moreover, the solubility of the samples in water at different pH values and the molecular weights of the samples in aqueous solution were studied.     

Synthesis and characterization of conjugated polymers and their blends for optoelectronic applications

Various polymeric blends of hole transporting materials, (such as MEH-PPV and P3HT) and electron transporting materials (such as poly(phenyl-vinyl-quinoline) and poly[2-(4-methacryloxyphenyl)-5-phenyl)-1,3,4-oxadiazole]) have been prepared and investigated. Moreover a soluble, main chain oxadiazole bearing polyether has been synthesized, aiming towards an efficient electron transporting polymeric material which was also used for blend preparation together with P3HT. A deeper investigation into their spectroscopic characteristics using, primarily, FT-IR spectroscopy, but also UV-Vis spectroscopy has been conducted. The surface morphology of these blends was investigated using Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) in an attempt to gather information for their solid state properties and morphologies. Finally, DSC measurements provided additional insight into the thermal behaviour of these materials.     

Synthesis of polychlorovinylenes as active conjugated polymers and their application for low-temperature formation of carbon structures

Russian Chemical Bulletin - A low-temperature approach to the synthesis of carbon structures by dehydrochlorination of carbon-chain chlorine-containing polymers was suggested. The formation of...     

Synthesis, characterization and pharmacologically active sulfamethoxazole polymers

Three anti-microbial pharmaceutical drugs were synthesized from two different synthetic routes. 4-acrylamido-N-(5-methyl-3-isoxazolyl)benzenesulfonamide (AMBS) and 4-methacrylamido-N-(5-methyl-3-isoxazolyl)benzenesulfonamide (MMBS) were prepared by reacting acryloyl chloride and methacryloyl chloride with 4-amino-N-(5-methyl-3-isoxazolyl)benzenesulfonamide in the presence of triethylamine. N-[4-sulfamido-N-(5-methyl-3-isoxazolyl)phenyl]maleimide (SMPM) was prepared by reacting maleic anhydride with 4-amino-N-(5-methyl-3-isoxazolyl)benzenesulfanamide. These monomers (AMBS, MMBS and SMPM) were polymerized using BPO as a free radical initiator. The pharmacological activity of SMPM compound depends on the functional group in the structure and small structural changes has resulted in higher pharmacological activity of sulfamethoxazole. Thus, maleimide polymer drug conjugate showed greater anti-microbial activity when compared with that of the native drug.     

Synthesis and characterization of N-substituted 1,4,5,6-tetrahydropyrimidine containing functional polymers as SO2 and CO2 sorbents

Novel vinyl monomers containing 1,4,5,6-tetrahydropyrimidine were prepared by the reaction of N-substituted-1,3-diaminopropane with N,N-dimethyl-formamide dimethylacetal, which gave 1-alkyl or aryl substituted 1,4,5,6-tetrahydropyrimidines, Alkylation of the tetrahydropyrimidine derivatives by chloromethylstyrene produces the N-methyl-N′-vinyl benzyl-1,4,5,6-tetrahydropyrimidinium chloride in high yields. These monomers were readily polymerized in dimethylformamide by AIBN at 80°C. Homopolymers and soluble linear copolymers were prepared and copolymerization parameters were rationalized. Further, insoluble terpolymers prepared from these monomers, styrene and divinylbenzene were tested for the sorption of the weakly acidic gases gave excellent results. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2411–2420, 1997     

Synthesis and characterization of PVP/AAc copolymer hydrogel and its applications in the removal of heavy metals from aqueous solution

Chelating poly(vinylpyrrolidone/acrylic acid) (PVP/AAc) copolymer hydrogels were prepared by radiation-induced copolymerization. The effects of preparation parameters such as PVP content in the hydrogel and irradiation dose on the swelling behavior of the hydrogel were studied. The pH dependent swelling was investigated. The thermal stability of the prepared hydrogel and the metal chelated ones was characterized by TGA. The removal of Fe(III), Cu(II), and Mn(II) from aqueous solution by the prepared PVP/AAc chelating hydrogel was examined by batch equilibration technique. The influence of treatment time, pH, and the initial feed concentration on the amount of the metal ions removed was studied. The results show that the removal of the metal ion followed the following order: Fe(III) > Cu(II) > Mn(II). The amounts of the removed metal ions increased with treatment time and pH of the medium. To re-use the hydrogel, the metal ions were stripped by using 2 N HCl.     

Synthesis and characterization of heterocyclic functionalized polymers by click reaction: Preparation of magnetic nanocomposites and studies on their thermal,mechanical, photophysical and metal ions removal properties

This work reports synthesis and characterization of heterocyclic functionalized polymers, poly(triazole-etherimidazole)s(PTAEI), from a dialkyne-terminated compound, 3-(4,5-bis(4-(propargyloxy)phenyl)-1H-imidazol-2-yl)-9-ethyl-9H-carbazole, by using click reaction. PTAEIs were characterized and their properties such as solubility, thermal, mechanical, photophysical and metal ions adsorption were investigated. These polymers had weight average molar masses(Mw) in the range of 19100-26700 g/mol, exhibited excellent solubility in polar aprotic solvents and formed low-colored flexible thin films by solution casting method. They exhibited good thermal stability with glass transition temperatures(Tg) between 160 °C and 211 °C and 10% weight loss temperatures(T10%) in the range of 308-426 °C. Nanocomposites of PTAEIs with epoxide-terminated Fe3O4 showed that strong interfacial interaction between inorganic particles and the polymer matrix contributed to the enhanced thermal and mechanical properties. The photoluminescence intensity of the PTAEIs increased and the spectra red shifted with increasing Fe3O4 content. The PTAEIs and nanocomposites were tested for their extraction capability of metal ions from aqueous solutions either individually or in the mixture.     

Synthesis, characterization and thermal properties of metaloquinolate-containing polymers

The monomer, 5-methyl(2-methacryloylethyloxy)-8-quinolinol(HEMA-CH₂-Hq), which possesses both double bond and 8-hydroxyquinoline groups, was synthesized from 2-hydroxyethyl methacrylate (HEMA) and 5-chloromethyl-8-quinolinol hydrochloride. The model polymer with 8-hydroxyquinoline ligands was obtained by free-radical copolymerization with styrene. So metaloquinolate (AlQ₃, ZnQ₂)-containing polymers are prepared by coordinating reaction with di(8-hydroxyquinoline) aluminum(AlQ₂) chelates or mono(8-hydroxyquinoline) zinc(ZnQ) chelates without cross-linking. Both polymer and polymer complexes were analyzed by FT-IR, UV-vis, DSC, TGA and photoluminescence spectroscopies. They are soluble in common solvents and easy to form films. The use of AlQ₂ and ZnQ avoided the cross-linking caused by the AlQ₃, ZnQ₂ formation between different polymer chains. High glass transition temperature, good thermal stability, and strong yellow-green fluorescence were observed for the prepared polymers. These polymers were expected to have the potential application in yellow-green OLEDs.     

Synthesis and characterization of functionalized amphiphilic polymers for utilization as surfactants

Eight novel PEG-based amphiphilic block copolymers having self-assembling properties has been reported in the present study. The polymers have been synthesized by reacting Poly(ethylene glycols) (PEGs) of different molecular weights viz. 600, 1000, 1500 and 2000 and dimethyl-5-hydroxyisophthalate in presence of concentrated H₂SO₄ as catalyst in solventless condition at 80–90°C and further alkylating the resulting polymers by attaching octyl and hexadecanyl chains to phenolic hydroxyl group. The resulting functionalized amphiphilic polymers have been characterized by ¹H and ¹³C-NMR spectroscopy. These polymers, when dissolved in water, aggregate to form micelles, giving sizes ranging from 13.00 to 87.24 nm as determined by Dynamic Light Scattering (DLS) instrument. The molecular weights have been also calculated from the DLS and are in the range 3.5×10⁴ to 1.8×10⁶ KDa (Kilo Daltons). Critical Micelle Concentrations (CMC) of the synthesized polymers was determined using electrical conductivity meter with values in the range of 105 to 138 mg L^?1 (milligrams per litre).     

Synthesis and characterization of a novel series of metallothiocarbohydrazone polymers and their adducts

A novel linear polymeric pentadentate (O₂N₂S‐sites) ligand (H₃L) bearing both soft and hard donors was prepared by the reaction of a bifunctional carbonyl compound, 4,6‐diacetylresorcinol, with a bifunctional hydrazide compound, thiocarbohydrazide. Mono‐ and binuclear Cu^II and Ni^II complexes/each monomeric unit of the polymeric ligand were obtained depending on the pH of the reaction medium and the metal ion. Adducts with 1,10‐phenanthroline (Phen) and 2,2′‐bipyridyl (Bpy) were obtained. Anomalous dimeric Co^II/Co^III complexes of the polymeric ligand were obtained in which two molecules of the linear polymeric ligand trapped two cobalt ions (Co^II and Co^III) in each monomeric unit. These structures are very interesting in that they contain Co^II/Co^III, side by side, as high‐spin square planar coordinated Co^II ions and low‐spin (diamagnetic) octahedral coordinated Co^III ions. The suggested structures of the complexes have been elucidated on the basis of elemental and thermal analyses, conductance, and magnetic susceptibility measurements as well as spectral studies (electronic, IR, and ESR spectra). © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:100–107, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20239