Acoustooptic modulators as switchable beam-splitters in high-speed holography

Two acoustooptic deflection devices are used as beam-splitters to realize an optical set-up for double-pulse high-speed holography. The essential features of these beam-splitters are: the ratio of object to reference light can be adjusted by the sound intensity, and the optical path can be altered quickly by turning the sound on and off. The influence of the frequency shift between the object and reference wave is discussed and experimental results are shown.     

基于时域多普勒修正的运动声全息识别方法

由于运动声源测量信号中多普勒效应的存在,一般声全息方法无法直接使用,而阵列信号波束成形处理方法无法进行定量分析.本方法建立了基于测量面、辐射面和全息面的运动学几何关系,提出了声源与测量信号之间的非线性时间映射方法,基于运动声源的声源特征函数,构造了消除多普勒效应的全息面时域声压分布.全息重建得到运动声源表面有效声压分布,实现了对主要声源处声压幅值的定量估计.实际运动声源的测量实验结果证明了该方法的有效性.     

Liquid-surface relief: Its transient behaviour for pulse-excited transducers

The investigation of ultrasonically produced liquid-surface relief by means of double-exposure holography to determine the sound intensity has been extended to pulsed ultrasonic waves and the transient behaviour of the surface relief. The rise time and height of the surface elevation varies considerably with pulse duration, sound field structure, and sound pressure amplitude. For pulse repetition frequencies higher than 200 Hz a steady-state condition is achieved.     

基于声压梯度参考的部分场分解方法及实验研究

采用扫描测量方式得到的不相干声场需分解成完全相干的部分场后才能用于近场声全息重建. 现有的方法都是将声压作为参考进行部分场分解. 本文提出以声压梯度作为参考, 并建立一种基于声压梯度参考的部分场分解方法. 由于声压梯度比声压的衰减速度更快, 受到其他声源和环境噪声的影响比声压小, 所以以声压梯度为参考在分解完全相干的部分场过程中比以声压为参考更具有优势. 通过数值仿真和实验分析, 一方面验证了基于声压梯度参考的部分场分解方法的正确性和可行性; 同时通过与基于声压参考的部分场分解结果比较, 说明了基于声压梯度参考的部分场分解方法分解更稳健、结果更精确.     

Deciphering vibration holograms

In vibration holography one measures the temporal Fourier coefficients of the complex amplitude emanating from the vibrating object. However, the user wants to know the temporal Fourier coefficients of the mechanical vibration itself. The mechanical vibrations are proportional to the phase of the complex light amplitude. Hence, the temporal Fourier coefficients of the mechanical vibrations depend in a complicated manner on the temporal Fourier coefficients of the complex amplitude itself. So far, either narrow approximations or complicated Bessel algorithms were used for deducing the mechanical Fourier coefficients from the optical Fourier coefficients. In other words, deciphering the mechanical data from the optical measurements was not easy.We propose a simple and rigorous algorithm for this deciphering project. In addition we outline a holographic experiment that allows one to reconstruct a space- and time-dependent complex amplitude and also its temporal derivative. This experiment is capable of displaying the mechanical velocity distribution as image brightness. Also the spatial distribution of mechanical acceleration can be displayed.     

球面参考光波数字全息的一些特点分析及实验

对以球面波作为参考光记录数字全息图的采样和再现分离条件进行了详细的分析。推导出了同时满足采样和再现分离条件时,CCD及物体的横向尺寸、物体及参考光源至CCD的距离之间需要满足的关系式,证明了完全散射物体上复振幅在记录面上的叠加可以等效为一个点光源在记录面上产生的效果,进行了相应的实验研究。结果表明：数字全息术中采用球面参考光波可以比采用平面参考光波更容易满足采样和分离条件,并可以记录到更多的物体信息;在物体至CCD的距离固定的情况下,无透镜傅里叶变换全息术是优化的记录光路结构;散射物体比衍射物体的数字全息图更容易满足采样和分离条件。     

Vibration Analysis by Phase Shifting Digital Holography

Phase-shifting digital holography has been used for the study of vibrating objects. The time-averaged complex amplitude of Fresnel diffracted field due to a vibrating object was obtained by using a three-step phase-shifting algorithm. Taking the inverse Fresnel transform of the complex amplitude resulted in an image of the object superimposed with Bessel fringes. The Bessel fringes are contour map of the vibration amplitude. By sinusoidally modulating the phase of the reference beam at the vibration frequency, the brightest fringe could be shifted to points of interest, thus extending the measurable range of vibration amplitude.     

Acoustic vibration of the amphibian eardrum studied by white noise analysis and holographic interferometry

The motion of the amphibian eardrum under free-field acoustic stimulation was investigated using time-averaged holography. We show that the amplitude is linearly related to sound pressure up to +/- 1000 nm. The frequency response of the eardrum shows broad resonance characteristics with a main peak between 1200-2200 Hz. The velocity of the tympanic membrane's motion at its resonance frequency matches the acoustic velocity of air particles. The resonance characteristics of the eardrum are also revealed by white noise stimulation. The power spectrum obtained by Fourier transformation of the autocorrelation of the response to noise resembles closely that obtained by holography.     

Object recognition by use of polarimetric phase-shifting digital holography

Pattern recognition by use of polarimetric phase-shifting digital holography is presented. Using holography, the amplitude distribution and phase difference distribution between two orthogonal polarizations of three-dimensional (3D) or two-dimensional phase objects are obtained. This information contains both complex amplitude and polarimetric characteristics of the object, and it can be used for improving the discrimination capability of object recognition. Experimental results are presented to demonstrate the idea. To the best of our knowledge, this is the first report on 3D polarimetric recognition of objects using digital holography.     

偏光全息研究历程与展望

全息是目前一项极具前景的科学技术,即通过信号光和参考光的干涉,在小小的全息图上记录丰富的信息。相比于传统全息仅记录光波的相位、振幅信息,偏光全息可以将额外的偏振信息记录于偏振态敏感材料中。本文从偏光全息材料入手,详细介绍了偏光全息生产过程;同时介绍基于琼斯理论和张量理论的偏光全息原理和研究进展;最后描述了偏光全息在全息存储和纳米光学领域的发展前景。     

数字全息用于光波衍射传播理论教学研究

数字全息技术是基于传统光学全息原理,借助于光电探测和数字处理技术,通过单次曝光记录和再现物光场的振幅和相位信息,近年来被广泛研究和应用.将数字全息应用于光波衍射传播理论教学中,不仅能够使学生在学习过程中形象、直观的理解光波衍射传播理论,而且能够通过编程计算完成数字全息图的数值再现,锻炼他们的知识运用能力,从而拓宽专业知识面、了解科学的发展前沿.     

单层传声器阵列重建相干声场的近场声全息方法研究

针对传声器阵列两侧存在相干声源的非自由声场重建问题,提出基于球面谐波函数扩展近场声全息理论的相干声场重建方法。该方法在已知测量面两侧声源几何位置时,使用单层传声器阵列获取测量面处的声压分布,通过最小二乘法获得与目标声源和干扰噪声源响应对应的最优球波函数扩展项数和最优系数向量,结合测点位置的空间坐标进行声波分解,并分别重建出各声源在测量面上的声压分布。为了验证方法的有效性,分别给出了相干噪声源为球形声源和非球形声源的仿真验证,并在全消声室内对双扬声器产生的相干声场的重建进行了实验验证。结果表明:该方法对球形声源和非球形声源干扰下的声场重建都具有较好的效果,球形声源干扰下的重建精度更高。      

Bending and acoustic waves in a water-filled box studied by pulsed TV holography and LDV

Pulsed TV holography and laser Doppler vibrometry (LDV) are non-destructive and non-contacting methods useful in the testing of mechanical properties in a wall separating two media. This paper presents comparative studies of transient, propagating bending waves in an impact-loaded thin aluminium wall of a box, and acoustic waves generated in the water inside the box using the two mentioned methods. Besides being evaluated and compared, the results were used to investigate qualities of the methods for the specific applications. The measured wave propagations obtained from the two methods are consistent regarding both amplitude and phase. Further, transient pressure fields in the water have been computed from the pulsed TV holography measurements. Since none of the two methods are capable of providing both temporal and spatial information simultaneously, they complement each other.     

Dynamic and multiplex holography with scanning Fabry-Pérot fringes

Suitably scanned Fabry-Pérot fringes were used to record and reconstruct a dynamic object. The technique can be used to increase the useful amplitude range of time averaged holography of moving objects and also as a convenient tool for multiplex holography.     

Source characterization of a subsonic jet by using near-field acoustical holography

In the present study, patch near-field acoustical holography was used in conjunction with a multireference, cross-spectral sound pressure measurement to visualize the sound field emitted by a subsonic jet and to predict its farfield radiation pattern. A strategy for microphone array design is described that accounts for the low spatial coherence of aeroacoustic sources and for microphone self-noise resulting from entrained flow near the jet. In the experiments, a 0.8-cm-diameter burner was used to produce a subsonic, turbulent jet with a Mach number of 0.26. Six fixed, linear arrays holding eight reference microphones apiece were disposed circumferentially around the jet, and a circular array holding sixteen, equally spaced field microphones was traversed along the jet axis to measure the sound field on a 30-cm-diameter cylindrical surface enclosing the jet. The results revealed that the jet could be modeled as a combination of eleven uncorrelated dipole-, quadrupole-, and octupole-like sources, and the contribution of each source type to the total radiated sound power could be identified. Both the total sound field reconstructed in a three-dimensional space and the farfield radiation directivity obtained by using the latter model were successfully validated by comparisons to directly measured results.     

用Stokes参量法实现数字同轴偏振全息的研究

提出了一种基于Stokes参量的数字同轴偏振全息方法.在实验中用一束线偏振光和一束椭圆偏振光作为参考光, 分别与物光进行干涉,通过拍摄在两个相互垂直方向上的全息图,计算出物光在这两个方向的振幅和相位信息, 从而得到物光的Stokes参量和物体的全偏振信息,实现对各向异性物体偏振态空间分布的图像重建. 实验结果表明,该方法可用于物体的全偏振特性的测量.这种方法在求出物光Stokes参量的同时, 也可消除零级像和共轭像的干扰,因此也可用于同轴或离轴全息.     

Reconstruction of source distributions from sound pressures measured over discontinuous regions: multipatch holography and interpolation

In the present work, a method of alternating orthogonal projections is described in the context of near-field acoustical holography; it allows missing (or "not measured") data to be recovered, thus relieving the strictness of measurement requirements related to the use of the discrete Fourier transform. The method described here provides the detailed foundation for the patch holography procedure that has previously been introduced to mitigate finite measurement aperture effects by allowing the sound field to be iteratively extended beyond the measurement aperture. It is also shown that the latter iterative algorithm can be used regardless of the spatial distribution of measured data: i.e., patches can be discontinuous. Numerical simulations performed by using a synthetic sound field created by a point-driven, simply supported plate were used to demonstrate the latter point. In particular, a multipatch holography procedure is described that allows a source distribution to be reconstructed from the hologram pressure measured over multiple, unconnected patches. It is finally shown that a related approach allows spatial resolution enhancement by interpolation between measured points.     

统计最优平面近场声全息原理与声场分离技术

测量孔径尺寸的有限性，在基于空间傅里叶变换的平面近场声全息中会带来窗效应和卷绕误差. 为了克服窗效应和卷绕误差，引入了统计最优平面近场声全息技术. 运用声场叠加原理，证明了统计最优平面近场声全息的理论公式.通过在空间波数域限定kx,ky的取值范围，并离散其确定的空间波数面的途径，提出了一种确定波数矢量的方法.为了克服常规统计最优平面近场声全息技术的应用局限性——全息面一侧的声场必须为自由声场，提出了适用于统计最优平面近场声全息的、基于双全息面测量的空间声场分离技术. 通过实验和数值仿真对理论推导的正确性进行了验证. 关键词： 统计最优 平面近场声全息 波数矢量 声场分离     

非均匀流体介质内部散射声场重建的逐层计算方法*

入射声波激励下非均匀流体介质内部散射声场的重建方法对超声层析成像具有重要意义。以往采用矩量法求解,但该方法全域离散形成的复数满秩矩阵规模随着分辨率与计算精度的提高而急剧增大,对算力具有很高的要求,一定程度上限制了其在实际中的应用。为克服上述缺陷,本文以逐层离散、逐层计算为核心思想,以声散射基本公式与近场声全息理论为基础,推导出逐层计算非均匀流体介质内部散射声场的理论公式并给出对应的几何离散模型。为验证该方法的可行性,以矩量法为参照,对同样的介质模型进行介质内部声场重构仿真。结果表明,逐层算法不仅可以有效地重建非均匀流体介质内部散射声场,且大幅度减小了求解规模。     

Frequency characteristics of the middle ear

For 68 temporal bones, frequency curves for the round window volume displacement have been measured for a constant sound pressure at the eardrum. Phase curves were measured for 33 of the specimens. The levels averaged amplitude curve is approximately flat below 1 kHz, where the round window volume displacement per unit sound pressure at the eardrum is 6.8 X 10(-5) mm3/Pa, and falls off by about 15 dB/oct at higher frequencies. For the 20 ears having the largest sound transmission magnitude at low frequencies, the corresponding amplitude curve is displaced about 5 dB towards higher levels. The phase of the round window volume displacement lags the eardrum sound pressure phase. In average for 33 temporal bones, the phase lag increases from zero at the lowest frequencies to pi near 2 kHz and to about 1.5 pi at 10 kHz.