Fine tuning of gadolinium doped ceria electrolyte nanoparticles via reverse microemulsion process

Gadolinium doped ceria (Gd–CeO₂) nanoparticles have been synthesized by an reverse microemulsion system using cyclohexane as the oil phase, a non-ionic surfactant Igepal CO 520 and their mixed aqueous solutions of gadolinium III nitrate hexahydrate and cerium III nitrate hexahydrate as the water phase. The control of particle size was achieved by varying the water to surfactant molar ratio. The synthesized and calcined powders were characterized by thermogravimetry-differential thermal analysis (TGA-DTA), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. The XRD results show that all the samples calcined at 700 °C were single phase cubic fluorite structure. The average size of the particle was found to increase with increase in water to surfactant molar ratio (R). The mean diameter of the particle for various value of R varies between 8–15 nm (SEM) and 7.5–11 nm (TEM), respectively. EDS confirm the presence of gadolinia and ceria phase in the nanopowder calcined at 700 °C. FTIR analysis was carried to monitor the elimination of residual oil and surfactant phases from the microemulsion-derived precursor and calcined powder. Raman spectroscopy and DTA evidenced the formation of a solid solution of gadolinium doped ceria at room temperature.     

GaN taper rods: Solid-phase synthesis, crystal defects, and optical properties

Wurtzite GaN taper rods assembled from highly oriented nanoparticles were synthesized using NaNH₂ and the as-synthesized GaOOH prismatic rods as reactants at 600 °C for 5 h. The lengths of the GaN taper rods are in the range of 4–6 μm and the diameters are about 0.5–1.5 μm. It was found that a slow heating rate (1 °C min⁻¹) was beneficial to keeping the one-dimensional (1D) skeleton of GaN, otherwise only GaN nanoparticles were obtained with a quick heating rate (10 °C min⁻¹). Selected area electron diffraction (SAED) patterns and high-resolution transmission electron microscopy (HRTEM) observations revealed that the GaN taper rods assembled from highly oriented nanoparticles and there were crystal defects in the GaN structure. The GaN taper rods displayed luminescence emission in the blue-violet region, which may be related to crystal defects.     

水溶液法制备CeF3纳米颗粒

氟化铈(CeF3)具有很高的离子电导率［1］和独特的光学特性［2］, 可用于制作化学传感器和光学元器件. CeF3还是良好的固体润滑剂［3］. 近年来的研究结果表明, 与氟化物粗晶材料相比, 纳米尺度的氟化物的性能有显著的提高， 因此, 其制备方法也很受关注. 目前, 制备氟化物纳米颗粒的方法有蒸发法［4］、 微乳液法［2, 5~8］、 水醇混合溶液法［3,9］和微波固相氧化还原合成法［10］等. 但是, 水溶液直接沉淀法作为一种操作简单, 成本低, 适合批量生产的制备方法尚未见用于制备纳米CeF3颗粒.     

Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles

Crystalline ZrO₂ nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO₂ with plate-like morphology, and nanoparticles of the cubic ZrO₂ high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic polymorph, was confirmed by electron microscopy and Raman spectroscopy. The crystallinity and morphology of the resulting ZrO₂ nanoparticles can be adjusted by the choice of the reaction conditions. The cubic ZrO₂ nanoparticles have a high surface area (300 m²/g) and exhibit a strong photoluminescence in the UV region.     

Synthesis and Some Properties of Cerium Dioxide Hydrosols

Cerium dioxide hydrosols are synthesized by peptizing with nitric acid a precipitate obtained by hydrolyzing cerium(III) nitrate. The synthesized sols are stable with respect to aggregation in both acidic (pH 1.5–3.0) and alkaline media (pH 9.0–11.0). The mean hydrodynamic radius of particles is about 25 nm. The isoelectric point corresponds to pH 6.2. The phase composition of sol particles is determined by X-ray diffraction at pH of the dispersion medium ranging from 1.5 to 3.0. The sol coagulation thresholds are determined in the presence of sodium nitrate and sulfate, as well as of mixed magnesium salt at various pH values of the dispersion medium. Assumptions are made concerning the nature of the aggregative stability of sols.     

The influence of calcination on the size of nanocrystals, porous structure and acid–base properties of mesoporous anatase used as catalytic support

Mesoporous anatase was prepared following sol–gel and using urea as template. The influence of calcination temperature on the phase stability, nanocrystal/aggregate size, pore size distribution and specific surface area as well as on the acid–base behavior in aqueous solutions was studied using X-ray diffraction, laser-Raman and diffuse reflectance spectroscopies, scanning electron microscopy and laser scattering as well as N₂ adsorption–desorption isotherms and potentiometric mass titrations.The crystal structure was kept constant upon calcination over the whole temperature range, 200–500 °C. In this range anatase is constituted from primary nanocrystals. These are assembled into larger, rather spherical, clusters of about 30–40 nm and then into aggregates of various sizes (0.2–0.3 μm and 2–100 μm) with a distribution centered at about 12 μm. Increase of the calcination temperature caused an increase in the size of the primary nanocrystals from 8.1 nm at 200 °C to 17.1 nm at 500 °C, whereas calcination does not influence the morphology at micro-scale. Moreover, increase of the calcination temperature from 200 °C to 500 °C brings about a shift in the mean pore diameter from 47 nm to 91 nm accompanied by a decrease in the specific surface area and pore volume. The above effects were related with the aforementioned increase in the size of the primary nanocrystals. The value of pzc and the values of surface charge determined at various pH do not practically depend on the calcination temperature. The absence of pore space confinement effects was explained in terms of the structure and size of the interface development between the anatase surface and the electrolytic solution.     

Germanium nanoparticles from solvated atoms: synthesis and characterization

Germanium nanoparticles were synthesized by the chemical liquid deposition method (CLD) in which the Ge atoms, produced resistively, were co-deposited with 2-propanol, acetone and tetrahydrofurane vapors to obtain colloidal dispersions. The colloidal dispersions were characterized by UV-vis spectrophotometry, transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and Infrared Spectroscopy (FTIR) techniques. The Germanium colloids are, in general, kinetically unstable. Strong absorption bands in the UV region suggest that nanoparticles obtained by this procedure exhibit quantum confinement. In the Ge colloids, the particle size distribution is highly sensitive to concentration change. For example, the TEM measurements revealed for the Ge-2-propanol colloid, particle sizes close to 3 nm for a concentration of 10^–3 M and 30 nm for a concentration of 10^–2 M. The HRTEM and SAED showed the high crystallinity of the nanoparticles, and it was possible to observe the typical lattice spaces of a diamond cubic Ge structure. The FTIR studies revealed the Ge-organic nature of the particles surface. Mechanisms and structures have been proposed for surface reactions.     

Toluene abatement on Ag-CeO2/SBA-15 catalysts: synergistic effect of silver and ceria

As a typical volatile organic compound, toluene is a hazardous material for human health and the environment, and currently, the development of catalysts for its oxidation into CO₂ and water is crucial. The series of Ag-CeO₂/SBA-15 catalysts is synthesized by wetness impregnation techniques and characterized by a number of physical-chemical methods (nitrogen [N₂] physisorption, small angle X-ray scattering [SAXS], transmission electron microscopy [TEM], and temperature-programmed reduction [TPR]). The toluene sorption and catalytic properties in toluene oxidation are studied. Small silver [Ag] and cerium oxide [ceria, CeO_2] particles with sizes below 3 nm are predominantly formed in the ordered structure of Santa Barbara Amorphous-15 [SBA-15]. The interactions between the Ag and CeO₂ nanoparticles are established. Temperature-programmed desorption of toluene [TPD-C₇H₈] analysis shows that physical adsorption of toluene occurs on pristine SBA-15 material, while the introduction of either silver or ceria to SBA-15 leads to the appearance of additional strongly bound chemisorbed toluene on such sites. When both Ag and CeO₂ are introduced, only chemisorbed toluene is formed over the Ag-CeO₂/SBA-15 catalyst, and the highest catalytic activity in toluene oxidation is observed over this catalyst (T_98% = 233 °C, 0.2% C₆H₅CH₃) that is attributed to the synergistic effect of ceria [CeO_2] and silver [Ag].     

Synthesis and characterization of the water-soluble silica-coated ZnS:Mn nanoparticles as fluorescent sensor for Cu ions

Silica-coated ZnS:Mn nanoparticles were synthesized by coating hydrophobic ZnS:Mn nanoparticles with silica shell through microemulsion. The core–shell structural nanoparticles were confirmed by X-ray diffraction (XRD) patterns, high-resolution transmission electron microscope (HRTEM) images and energy dispersive spectroscopy (EDS) measurements. Results show that each core–shell nanoparticle contains single ZnS:Mn nanoparticle within monodisperse silica nanospheres (40 nm). Photoluminescence (PL) spectroscopy and UV–vis spectrum were used to investigate the optical properties of the nanoparticles. Compared to uncoated ZnS:Mn nanoparticles, the silica-coated ZnS:Mn nanoparticles have the improved PL intensity as well as good photostability. The obtained silica-coated ZnS:Mn nanoparticles are water-soluble and have fluorescence sensitivity to Cu²⁺ ions. Quenching of fluorescence intensity of the silica-coated nanoparticles allows the detection of Cu²⁺ concentrations as low as 7.3 × 10⁻⁹ mol L⁻¹, thus affording a very sensitive detection system for this chemical species. The possible quenching mechanism is discussed.     

Structural,optical and photocatalytic activity of cerium doped zinc aluminate

Zinc aluminate and cerium-doped zinc aluminate nanoparticles are synthesised by co-precipitation method. Ammonium hydroxide is used as a precipitating agent. The synthesised compounds are characterised by powder X-ray diffraction (XRD), Fourier transform Infrared spectroscopy (FT-IR), Ultraviolet diffuse reflectance spectroscopy (UV-DRS), Thermogravimetric analysis (TGA), Scanning electron microscopy (SEM) and Surface area measurements. The photocatalytic activity of zinc aluminate and cerium doped zinc aluminate nanoparticles are studied under the UV light and visible light taking methylene blue as a model pollutant. The amount of catalyst, concentration of dye solution and time are optimised under UV-light. Degradation of methylene blue under the UV-light is found to be 99% in 20 min with 10 mg of cerium doped catalyst. Compared to visible light degradation, the degradation of dye under UV-light is higher. Cerium doping in zinc aluminate (ZnAl₂O₄:Ce³⁺) increased the photocatalytic activity of zinc aluminate.     

Understanding the formation and evolution of ceria nanoparticles under hydrothermal conditions

Supercritical growth: The formation and evolution of ceria nanoparticles during hydrothermal synthesis was investigated by in?situ total scattering and powder diffraction. The nucleation of pristine crystalline ceria nanoparticles originated from previously unknown cerium dimer complexes. The nanoparticle growth was highly accelerated under supercritical conditions.     

Palladium nanoparticles from solvated atoms—stability and HRTEM characterization

Palladium particles of nanometric dimensions were synthesized by the chemical liquid deposition method in which the Pd atoms were co-deposited at 77 K with 2-propanol, acetone, and tetrahydrofurane vapor to obtain colloidal dispersions. The colloidal dispersions were characterized by UV–visible spectrophotometry, transmission electron microscopy (TEM) and high-resolution TEM (HRTEM). The palladium colloids synthesized by use of these solvents are very stable. A strong absorption band in the UV region suggests that quantum confinement occurs in the nanoparticles obtained by this procedure. Studies of TEM micrographs reveal average size distributions between 1 and 5 nm for all Pd colloids. Whereas particle sizes in Pd–2-propanol colloids are not very sensitive to concentration change, the particle-size average in Pd–acetone and Pd–THF increases by 0.5 nm when the concentration increases from 10^–3 to 10^–2 mol l^–1. The HRTEM results show the high crystallinity of Pd nanoparticles and three low-energy structure shapes were found: cuboctahedron, tetrakaidecahedron, and icosahedron.     

Wet-chemical synthesis of crystalline BaTiO3 from stable chelated titanium complex: formation mechanism and dispersibility in organic solvents

Crystalline barium titanate nanoparticles were synthesized in solution at low temperature (70 degrees C) from acetylacetone chelated titanium complex and barium hydroxide. Very fine crystalline solids were characterized to cubic phase of BaTiO(3) by X-ray diffraction studies of the air-dried samples. It was observed that the crystalline barium titanate was formed in solution at Ba/Ti molar ratio > or =2.5. The dependence of the reaction temperature and the Ba(OH)(2) concentration (in terms of Ba/Ti molar ratio) on formation of crystalline BaTiO(3) in solution-phase was studied, and a plausible mechanism toward the formation of crystalline BaTiO(3) was also proposed. Crystallite sizes of the BaTiO(3) were found to be in the range 33-50 nm, while the average particle sizes, measured by dynamic light scattering method were in the range 70-100 nm. The crystalline BaTiO(3) prepared from acetylacetone chelated titanium complex was highly dispersible in organic medium such as N-methyl-2-pyrillidone (NMP) and N,N-dimethyl formamide (DMF).     

Cuttlebone-derived organic matrix as a scaffold for assembly of silver nanoparticles and application of the composite films in surface-enhanced Raman scattering

Biologically derived materials provide a rich variety of approaches toward new functional materials because of their fascinating structures and environment-friendly features, which is currently a topic of research interest. In this paper, we show that the cuttlebone-derived organic matrix (CDOM) is an excellent scaffold for the one-step synthesis and assembly of silver nanoparticles (AgNPs), which can be further used as substrate for surface-enhanced Raman scattering (SERS). Formation of AgNPs–CDOM composite was accomplished by the reaction of CDOM with AgNO₃ and NH₃·H₂O solution at 80 °C without using any other stabilizer and reducing agents. UV–vis spectra and TEM were utilized to characterize the AgNPs and investigate their formation process. Results demonstrate that the size and distribution of AgNPs can be partly regulated by changing incubation time; the concentration of NH₃·H₂O is critical to the formation rate of AgNPs. As a proof of principle, we show that the AgNPs–CDOM composite can be employed in trace analysis using SERS.     

Resonance Rayleigh scattering and resonance non-linear scattering method for the determination of aminoglycoside antibiotics with water solubility CdS quantum dots as probe

In pH 6.6 Britton–Robinson buffer medium, the CdS quantum dots capped by thioglycolic acid could react with aminoglycoside (AGs) antibiotics such as neomycin sulfate (NEO) and streptomycin sulfate (STP) to form the large aggregates by virtue of electrostatic attraction and the hydrophobic force, which resulted in a great enhancement of resonance Rayleigh scattering (RRS) and resonance non-linear scattering such as second-order scattering (SOS) and frequency doubling scattering (FDS). The maximum scattering peak was located at 310 nm for RRS, 568 nm for SOS and 390 nm for FDS, respectively. The enhancements of scattering intensity (ΔI) were directly proportional to the concentration of AGs in a certain ranges. A new method for the determination of trace NEO and STP using CdS quantum dots probe was developed. The detection limits (3σ) were 1.7 ng mL⁻¹ (NEO) and 4.4 ng mL⁻¹ (STP) by RRS method, were 5.2 ng mL⁻¹ (NEO) and 20.9 ng mL⁻¹ (STP) by SOS method and were 4.4 ng mL⁻¹ (NEO) and 25.7 ng mL⁻¹ (STP) by FDS method, respectively. The sensitivity of RRS method was the highest. The optimum conditions and influence factors were investigated. In addition, the reaction mechanism was discussed.     

Preparation and hydrogen permeation of BaCe0.95Nd0.05O3−δ membranes

A mixed proton–electron conducting perovskite made of BaCe_0.95Nd_0.05O_3−δ (BCN) was prepared by EDTA/citric acid complexing method. The precursor was characterized by differential scanning calorimetry (DSC), thermogravimetry (TG), and X-ray diffraction (XRD). In order to learn the perovskite formation process during the calcination, the intermediate, i.e. the sample calcined at 750 °C for 5 h, was investigated by scanning (STEM), energy-filtered (EFTEM), and high-resolution transmission electron microscopy (HRTEM) as well as electron energy-loss spectroscopy (EELS). The results revealed that the perovskite structure was formed via a solid-state reaction between barium–cerium mixed carbonate and cerium–neodymium mixed oxide particles. Dense mixed proton–electron conducting BCN membranes were made by pressing BCN powder followed by sintering. The microstructure of the sintered membranes was investigated by scanning electron microscopy (SEM). Hydrogen permeation through the BCN membrane was studied using a high-temperature permeator. The hydrogen permeation fluxes under wet conditions are higher than those under dry conditions, which is due to increased proton concentrations in the H⁺ hopping via OH groups. The hydrogen permeation increased with increasing hydrogen and steam concentrations in the feed. For a steam concentration of 15 vol.%, the hydrogen permeation flux reaches 0.026 ml/min cm².     

Partially positively charged silver nanoparticles prepared by p-benzoquinone

Partially positively charged silver nanoparticles were successfully prepared by interaction between p-benzoquinone and the surface of the nanoparticles. This result was primarily due to electron affinity of the carbonyl group in p-benzoquinone, as confirmed by FT-IR and X-ray photoelectron spectroscopy (XPS). In this study, p-benzoquinone acted as both a stabilizer and a reducing agent for silver nanoparticles. UV–vis spectra showed the formation of silver nanoparticles. TEM micrographs confirmed that most of silver nanoparticles exist in sizes less than 7 nm, and the average size of particle aggregates is approximately 20 nm.     

Sonochemical synthesis of cerium oxide nanoparticles-effect of additives and quantum size effect

Cerium oxide (CeO(2)) nanoparticles were prepared sonochemically, by using cerium nitrate and azodicarbonamide as starting materials, and ethylenediamine or tetraalkylammonium hydroxide as additives. The additives have a strong effect on the particle size and particle size distribution. CeO(2) nanoparticles with small particle size and narrow particle size distribution are obtained with the addition of additives; while highly agglomerated CeO(2) nanoparticles are obtained in the absence of additives. Monodispersed CeO(2) nanoparticles with a mean particle size of ca. 3.3 nm are obtained when tetramethylammonium hydroxide (TMAOH) is used as the additive and the molar ratio of cerium nitrate/azodicarbonamine/TMAOH is 1/1/1. Blue shifts of the absorption peak and the absorption edges of the products are observed in the UV-Vis absorption spectra as a result of the quantum size effect. The samples have been characterized using powder XRD, TEM, DLS, and absorption spectra.     

1-Substituted 5-thiotetrazoles as novel capping agents for stabilization of gold nanoparticles

Stable and nearly monodispersed gold nanoparticles with sizes of 2.8–4.7 nm are easily prepared by the reduction of tetrachloroaurate salts in a toluene-water system in the presence of 1-R-5-thiotetrazoles (R = Et, t-Bu, 1-adamatyl). The prepared gold nanoparticles were characterized by TEM, XRD, UV–Vis, FTIR and TGA.     

Synthesis of nanosized silicon particles by a rapid metathesis reaction

A solid-state rapid metathesis reaction was performed in a bed of sodium silicofluoride (Na₂SiF₆) and sodium azide (NaN₃) powders diluted with sodium fluoride (NaF), to produce silicon nanoparticles. After a local ignition of Na₂SiF₆+4NaN₃+kNaF mixture (here k is mole number of NaF), the reaction proceeded in a self-sustaining combustion mode developing high temperatures (950–1000 °C) on very short time scales (a few seconds). Silicon nanoparticles prepared by the combustion process was easily separated from the salt byproducts by simple washing with distilled water. The structural and morphological studies on the nanoparticles were carried out using X-ray diffractometer (XRD) and field emission scanning electron microscope (FESEM). The mean size of silicon particles calculated from the FESEM image was about 37.75 nm. FESEM analysis also shows that the final purified product contains a noticeable amount of silicon fibers, dendrites and blocks, along with nanoparticles. The mechanism of Si nanostructures formation is discussed and a simple model for interpretation of experimental results is proposed.