Structural Analysis of the Lipopeptide Produced by the <Emphasis Type="Italic">Bacillus subtilis</Emphasis> Mutant R2-104 with Mutagenesis

The lipopeptide and its homologues are a kind of the five major biosurfactants with prominent interfacial and biological activities. A suite of mutagenesis method was adopted to expose a wild lipopeptide-producing strain Bacillus subtilis HSO121 to improve lipopeptide yield, and a stable mutant named R2-104 with a 2.0-fold production of lipopeptide was obtained. Compared to that of the wild strain HSO121, the lipopeptide produced by R2-104 showed a similar surface activity, but the course profiles of lipopeptide production during cultivation were different, with the peak yield of 500 mg at about 9 h by R2-104, and 400 mg at about 5 h by HSO121. The constituent abundance of the lipopeptide homologues produced by R2-104 was also different from that by HSO121. Combined methods of ESI-MS, GC-MS and MS-MS were applied for structural characterization of lipopeptide homologues, and it showed that the lipopeptides produced by R2-104 and HSO121 were attributed to a surfactin family with different constituents. The dominant constituent of the surfactin family produced by R2-104 was anteiso C₁₅-surfactin with a relative content of 43.8 %, while the dominant one produced by HSO121was iso C₁₄-surfactin with a relative content of 33.1 %.     

Comparative Study on Different Expression Hosts for Alkaline Phytase Engineered in <Emphasis Type="Italic">Escherichia coli</Emphasis>

The application of alkaline phytase as a feed additive is restricted by the poor specific activity. Escherichia coli is a frequently used host for directed evolution of proteins including alkaline phytase towards improved activity. However, it is not suitable for production of food-grade products due to potential pathogenicity. To combine the advantages of different expression systems, mutants of the alkaline phytase originated from Bacillus subtilis 168 (phy168) were first generated via directed evolution in E. coli and then transformed to food-grade hosts B. subtilis and Pichia pastoris for secretory expression. In order to investigate the suitability of different expression systems, the phy168 mutants expressed in different hosts were characterized and compared in terms of specific activity, pH profile, pH stability, temperature profile, and thermostability. The specific activity of B. subtilis-expressed D24G/K70R/K111E/N121S mutant at pH 7.0 and 60 °C was 30.4 U/mg, obviously higher than those in P. pastoris (22.7 U/mg) and E. coli (19.7 U/mg). Moreover, after 10 min incubation at 80 °C, the B. subtilis-expressed D24G/K70R/K111E/N121S retained about 70 % of the activity at pH 7.0 and 37 °C, whereas the values were only about 25 and 50 % when expressed in P. pastoris and E. coli, respectively. These results suggested B. subtilis as an appropriate host for expression of phy168 mutants and that the strategy of creating mutants in one host and expressing them in another might be a new solution to industrial production of proteins with desired properties.     

An azide-bridged copper(II) 1D-chain with ferromagnetic interactions: synthesis,structure and magnetic studies

A coordination polymer of formula [Cu(μ _1,3-N₃)₂(imH)₂] _n (1) has been synthesized by reaction of Cu(NO₃)₂ with imidazole and sodium azide in CH₃OH/CH₃CN. The complex was characterized by FTIR, elemental analysis, powder diffraction, thermogravimetric analysis, magnetic measurements, and single-crystal X-ray diffraction. The X-ray crystal structure shows that the Cu(II) centers have a distorted octahedral coordination geometry, being coordinated by two imidazole ligands at the trans positions. Each azide links two [Cu(imH)₂]²⁺ units to form 1D zigzag chains. Variable-temperature magnetic susceptibility studies at low field reveal dominant intrachain ferromagnetic/antiferromagnetic interactions. Using a model with n = 10, the coupling parameters J _AF = ?2.95 and J _F = 17.99 with g = 2.12 have been determined.     

Use of the ionic liquid trioctylmethyl ammonium dodecanedioate as a corrosion inhibitor of steel in production water

The properties of trioctylmethyl ammonium dodecanedioate (TAD) as a corrosion inhibitor (CI) of API 5L X52 steel in production water (PW) were evaluated in steady state using weight loss and polarization techniques within a Reynolds number (N _Re ) interval ranging from 500 to 40,000. The highest obtained IE was 87 % at 100 ppm with N _Re  = 2500, whereas the lowest IE was 15 % at 10 ppm with N _Re  = 4000. TAD was classified as a mixed-type CI of API 5L X52 steel in PW. The \(\Delta G_{\text{ads}}^{^\circ }\) data established a relationship between the N _Re and the adsorption process, confirming the occurrence of physical adsorption phenomena.     

Activation and Stabilization of Olive Recombinant 13-Hydroperoxide Lyase Using Selected Additives

The stabilization of olive recombinant hydroperoxide lyases (rHPLs) was investigated using selected chemical additives. Two rHPLs were studied: HPL full-length and HPL with its chloroplast transit peptide deleted (matured HPL). Both olive rHPLs are relatively stable at 4 °C, and enzyme activity can be preserved (about 100% of the rHPL activities are maintained) during 5 weeks of storage at ?20 or at ?80 °C in the presence of glycerol (10%, v/v). Among the additives used in this study, glycine (2.5% w/v), NaCl (0.5 M), and Na₂SO₄ (0.25 M) provided the highest activation of HPL full-length activity, while the best matured HPL activity was obtained with Na₂SO₄ (0.25 M) and NaCl (1 M). Although the inactivation rate constants (k) showed that these additives inactivate both rHPLs, their use is still relevant as they strongly increase HPL activity. Results of C6-aldehyde production assays also showed that glycine, NaCl, and Na₂SO₄ are appropriate additives and that NaCl appears to be the best additive, at least for hexanal production.     

A Novel 3D Platinum–Thallium Coordination Polymer having Strong Metal–Metal Interactions

A new three-dimensional platinum(II)–thallium(I) coordination polymer [{Pt(pda)(NHCOtBu)₂}₄Tl₄][Pt(CN)₄]₂·2H ₂ O (pda = 1,2-propyldiamine) has been prepared from the direct reaction of [Tl₂Pt(CN)₄] and [Pt(pda)(NHCOtBu)₂] in water, and its structure was characterized by X-ray diffraction analysis. The compound crystallizes in monoclinic, space group Pn, a = 11.567(2) Å, b = 11.570(2) Å, c = 37.677(8)Å, β = 94.64(3)°, V = 5025.8(17) Å³, Z = 2, R1 = 0.0679 and wR2 = 0.1574 [I >  2σ (I)], Goodness-of-fit on F ² = 1.055. The compound exhibits a novel 3D network structure consisting of [Pt(CN)₄]^2? connected 1D infinite Pt–Tl–Pt–Tl chains via strong Pt–Tl bonds.     

Synthesis,crystal structure and fungicidal activity of 1-(4-chlorophenyl)-2-(5-((3,5-dimethyl-1H-pyrazol-1-yl)methyl)-4-phenyl-4H-1,2,4-triazol-3-ylthio)ethanone

A novel bis-heterocyclic compound was synthesized and characterized. The crystal structure of the title compound (C₂₂H₂₀ClN₅OS, Mr = 437.94) has been determined by single-crystal X-ray diffraction. The crystal is of triclinic, space group P-1 with a = 8.646 (2), b = 9.148 (3), c = 14.540 (4) Å, α = 94.422 (4), β = 98.500 (4), γ = 102.823 (4)°, V = 1101.8 (5) Å³, Z = 2, F(000) = 312, Dc = 1.320 g/cm³, μ = 0.2900 mm^?1, the final R ₁ = 0.041000 and wR ₂ = 0.1160 for 2675 observed reflections with I > 2σ(I). A total of 5623 reflections were collected, of which 3866 were independent (R _int = 0.019000). The fungicidal activity of title compound was determined, the results showed the title compound displayed moderate fungicidal activity against G. zeae Petch, Phytophthora infestans (Mont.) de Bary, Botryosphaeria berengeriana f. sp. piricola (Nose) koganezawa et Sakuma, Fusarium oxysporum f.sp. cucumerinum, and Cercospora arachidicola.     

New hybrids of clozapine and haloperidol and their isosteric analogues: synthesis,X-ray crystallography,conformational analysis and preliminary pharmacological evaluation

Schizophrenia is a debilitating mental disorder which affects approximately 1% of the world’s population. Clozapine is an atypical antipsychotic showing unmatched effectiveness in the control of treatment-resistant schizophrenia. Unlike typical antipsychotics, clozapine does not induce extrapyramidal side effects (EPS), tardive dyskinesia or elevate prolactin levels. However, clozapine can induce a potentially fatal blood disorder, agranulocytosis, in 1–2% of patients, severely limiting its clinical use. The model for antipsychotic activity under investigation is based on obtaining a clozapine-like profile with preferential dopamine D₄ and serotonin 5-HT_2A receptor affinity. Profiled herein are three unique members of a series of prospective antipsychotic agents. Compound (I) originated from the structural hybridization of the commercial therapeutics, clozapine and haloperidol, whilst compounds (II) and (III) possess an alternative tricyclic nucleus derived from JL13; a clozapine-like atypical antipsychotic developed by Liégeois et al. These compounds have been synthesized and characterized by means of elemental analysis, IR, ¹H and ¹³C-NMR spectroscopy, MS and X-ray diffraction. Compound (I) crystallizes in space group P(?1) with a = 10.5032(1), b = 10.6261(2), c = 12.6214(3) Å, α = 81.432(1)°, β = 83.292(1)°, γ = 61.604(1)°, Z = 2, V = 1223.62(4) Å³, C₂₈H₂₉ClN₄O, M _r = 473.00, D _c = 1.284 Mg/m³, μ = 0.185 mm^?1, F(000) = 500, R = 0.0506 and wR = 0.1304. Compound (II) crystallizes in the monoclinic space group P2₁/c with a = 10.8212(2), b = 9.3592(2), c = 22.9494(5) Å, β = 106.471(1)°, Z = 4, V = 2228.88(8) Å³, C₂₅H₂₅ClN₄O₂, M _r = 448.94, D _c = 1.338 Mg/m³, μ = 0.202 mm^?1, F(000) = 944, R = 0.0529 and wR = 0.1129. Compound (III) crystallizes in the monoclinic space group P2₁/c with a = 10.5174(2), b = 9.3112(2), c = 24.2949(5) Å, β = 98.666(1)°, Z = 4, V = 2352.03(8) Å³, C₂₅H₂₄Cl₂N₄O₂, M _r = 483.38, D _c = 1.365 Mg/m³, μ = 0.306 mm^?1, F(000) = 1008, R = 0.0478 and wR = 0.1067. The solid state conformations of (I), (II) and (III) exhibit the characteristic V-shaped buckled nature of the respective dibenzodiazepine and pyridobenzoxazepine nuclei with the central seven-membered heterocycle in a boat conformation. The molecules of (I) form a head-to-tail dimeric motif stabilized by hydrogen bonding. The results of a conformational analysis of compounds (I)–(III) investigating the effect of environment (in vacuo and aqueous solution) are presented. These analogues were tested for in vitro affinity for the dopamine D₄ and serotonin 5-HT_2A receptors and their comparative receptor binding profiles to clozapine and JL13 are reported.     

Mesophilic Acidogenesis of Food Waste-Recycling Wastewater: Effects of Hydraulic Retention Time,pH, and Temperature

The effects of hydraulic retention time (HRT), pH, and operating temperature (T _OP) on the degradation of food waste-recycling wastewater (FRW) were investigated in laboratory-scale hydrolysis/acidogenesis reactors. Response surface analysis was used to approximate the production of volatile organic acids and degradation of volatile suspended solids (VSS), carbohydrate, protein, and lipid with regard to the independent variables (1?≤?HRT?≤?3 days, 4?≤?pH?≤?6, 25?≤?T _OP?≤?45 °C). Partial cubic models adequately approximated the corresponding response surfaces at α?<?5 %. The physiological conditions for maximum acidification (0.4 g TVFA?+?EtOH/g VS_added) and the maximal degradation of VSS (47.5 %), carbohydrate (92.0 %), protein (17.7 %), and lipid (73.7 %) were different. Analysis of variance suggested that pH had a great effect on the responses in most cases, while T _OP and HRT, and their interaction, were significant in some cases. Denaturing gradient gel electrophoresis analysis revealed that Sporanaerobacter acetigenes, Lactobacillus sp., and Eubacterium pyruvivorans-like microorganisms might be main contributors to the hydrolysis and acidogenesis of FRW. Biochemical methane potential test confirmed higher methane yield (538.2 mL CH₄/g VS_added) from an acidogenic effluent than from raw FRW.     

Synthesis,characterization, antimicrobial activity and ultrastructure of the affected bacteria of new quinoline compounds

The reaction on 8-hydroxy quinoline-7-aldehyde azo compounds (HL _n ) (where n = 1–5) with 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one to obtain HL _n (where n = 6–10) have been characterized by means of TLC, melting point and spectral data, such as IR, ¹H NMR, mass spectra and thermal studies. The X-ray diffraction patterns of two starting materials 8-hydroxy quinoline-7-aldehyde (start 1), 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one (start 2) and the ligands (HL_5,10) are investigated in powder form. All the ligands have been screened for their antimicrobial activity against four local bacterial species, two Gram-positive bacteria (Bacillus cereus and Staphylococcus aureus) and two Gram-negative bacteria (Escherichia coli and Klebsiella pneumoniae) as well as against four local fungi; Aspergillus niger, Alternaria alternata, Penicillium italicum and Fusarium oxysporium. The results show that the azo ligands (HL _n ) (where n = 1–5) have no antimicrobial activity against bacteria and fungi while most azomethine ligands (HL _n ) (where n = 6–10) are good antibacterial agents against E. coli and K. pneumoniae as well as antifungal agents against P. italicum and A. alternata. The results were compared to standard substances (start 1) and (start 2). Among the azomethine ligands, HL₁₀ was the most effective against the most microorganisms tested. The size of clear zone was ordered as p-(OCH₃ < CH₃ < H < Cl < NO₂) as expected from Hammett’s constant (σ ^R ). Also, the ultrastructure study of the affected bacteria confirmed that HL₈ is good antibacterial agent against E. coli and S. aureus.     

Tetrakis [<Emphasis Type="Italic">N</Emphasis>-(2-pyridyl) sulfonamide] di palladium: synthesize,X-ray diffraction,antibacterial properties and as a novel binuclear Pd-complex for coupling reactions

The N-(2-pyridyl) 4-toluene sulfonamide as a free ligand (PTS) was prepared from the reaction of 2-amino pyridine and 4-toluenesulfonyl chloride in the presence of potassium hydroxide solution 1 M as a base and THF was used as a solvent. The complex tetrakis [N-(2-pyridyl) sulfonamide] di palladium (1) (Pd₂L₄) was also prepared from the reaction of PdCl₂(CH₃CN)₂ using (PTS) in the presence of NaOH 0.5 M and its application in Heck and Suzuki reactions. This complex consists of a binuclear unit consisting of four ligands linked to two palladium atoms via the nitrogen of pyridines ring and the nitrogen of sulfonamides. These compounds were confirmed by FT-IR and ¹H NMR spectroscopy. Moreover, the structure of the complex was studied by single-crystal X-ray diffraction method. The green crystal of Pd₂L₄ [L = N-(2-pyridyl) sulfonamide](1) was found to crystallize in the monoclinic space group C2/c with a = 18.2013(19), b = 19.7544(16), c = 17.2898(19) Å, β = 120.179(8) °; V = 5374.0(9) ų; Z = 4; the final R ₁ = 0.0894, wR ₂ = 0.1754 (or 5867 observed reflections and 318 variables). The Pd–Pd distance is 2.567(2) Å. In addition, PTS and Pd₂L₄ presented different antibacterial behaviors. The free ligand was active against Staphylococcus aureus and Escherichia coli, but the complex was inactive against them.     

Green Synthesis of Silver Nanoparticles Using <Emphasis Type="Italic">Commiphora caudata</Emphasis> Leaves Extract and the Study of Bactericidal Efficiency

The present study reports the synthesis of silver nanoparticles (Ag NPs) from silver nitrate solution using leaf extracts of Commiphora caudata. The formation of Ag NPs in the colloidal solution is confirmed by UV–Vis spectroscopy analysis. The identification of biomolecules is analyzed through fourier transform infrared spectroscopy. X-ray diffraction pattern shows that an average particle size of the synthesized nanoparticles are in the range of 40–24 nm. Field emission scanning electron microscopy and transmission electron microscopy confirm the formation Ag NPs in spherical shape. The photoluminescence study of the synthesized Ag NPs interprets the influence of C caudata leaf concentrations on emission behavior. Zeta potential measurement is carried out to determine the stability of synthesized Ag NPs. GC–MS analysis revealed that the C. caudata contained 11 compounds, such as Stigmasterol (24.14 %), Hexacosanoic acid, methyl ester (15.13 %) and 2-bromophenyl morpholine-4-carboxylate (11.71 %). The antibacterial activity of Ag NPs shows that these bio capped Ag NPs have higher inhibitory action for Escherichia coli, Klebsiella pheumoniea, Micrococcus flavus, Pseudomonas aeruginosa, Bacillus subtilis, Bacillus pumilus, Staphylococcus aureus.     

Structure,bioactivity and theoretical study of 1-cyano-<Emphasis Type="Italic">N</Emphasis>-p-tolylcyclo-propanecarboxamide

A novel cyclopropane derivative, 1-cyano-N-p-tolylcyclopropanecarboxamide (C₁₂H₁₂N₂O, Mr = 200.24) was synthesized and its structure was studied by X-ray diffraction, FTIR, ¹H and ¹³C NMR spectrum and MS. The crystals are monoclinic, space group P2_1/c with a = 7.109 (4), b = 13.758 (7), c = 11.505 (6) Å, α = 90.00, β = 102.731 (8), γ = 90.00 °, V = 1097.6 (9) ų, Z = 4, F(000) = 312, D _c  = 1.212 g/cm³, μ = 0.0800 mm^?1, the final R = 0.0490 and wR = 0.1480 for 1,375 observed reflections with I > 2σ(I). A total of 6,109 reflections were collected, of which 2,290 were independent (R _int = 0.0290). Theoretical calculation of the title compound was carried out with HF/6-31G (d,p), B3LYP/6-31G (d,p), MP2/6-31G (d,p). The full geometry optimization was carried out using 6-31G(d,p) basis set, and the frontier orbital energy. Atomic net charges were discussed, and the structure-activity relationship was also studied. The preliminary biological test showed that the synthesized compound is bioactive against the KARI of Escherichia coli.     

Acetone–Butanol–Ethanol Production from Waste Seaweed Collected from Gwangalli Beach,Busan, Korea,Based on pH-Controlled and Sequential Fermentation Using Two Strains

The optimal conditions for acetone–butanol–ethanol (ABE) production were evaluated using waste seaweed from Gwangalli Beach, Busan, Korea. The waste seaweed had a fiber and carbohydrate, content of 48.34%; these are the main resources for ABE production. The optimal conditions for obtaining monosaccharides based on hyper thermal (HT) acid hydrolysis of waste seaweed were slurry contents of 8%, sulfuric acid concentration of 138 mM, and treatment time of 10 min. Enzymatic saccharification was performed using 16 unit/mL Viscozyme L, which showed the highest affinity (K_m?=?1.81 g/L). After pretreatment, 34.0 g/L monosaccharides were obtained. ABE fermentation was performed with single and sequential fermentation of Clostridium acetobutylicum and Clostridium tyrobutyricum; this was controlled for pH. A maximum ABE concentration of 12.5 g/L with Y_ABE 0.37 was achieved using sequential fermentation with C. tyrobutyricum and C. acetobutylicum. Efficient ABE production from waste seaweed performed using pH-controlled culture broth and sequential cell culture.     

Synthesis,crystal structure,and hydrogen-bonded displacive-type structural phase transition of guanidine dichloroacetate

Guanidine dichloroacetate was synthesized and separated as crystals. Differential scanning calorimetry (DSC) measurement shows that this compound undergoes a reversible phase transition at about 275 K with a heat hysteresis of 28 K. Step-like dielectric anomaly observed at 274 K further confirms the phase transition. The single-crystal X-ray diffraction data suggested that these was a transition from a room-temperature phase with the space group of P2₁/n (a = 8.030(5), b = 12.014(9), c = 8.124(6) Å, β = 96.089(1)°, V = 779.3(1) Å³, and Z = 4) to a low-temperature one with the space group of P2₁/c (a = 7.941(2), b = 11.828(3), c = 10.614(2) Å, β = 130.985(1)°, V = 752.6(3) Å³, and Z = 4). The displacements of hydrogen bonds induce the structure phase transition.     

Saw-sedge <Emphasis Type="Italic">Cladium mariscus</Emphasis> as a functional low-cost adsorbent for effective removal of 2,4-dichlorophenoxyacetic acid from aqueous systems

For the first time in the published literature, a study is described concerning the use of the saw-sedge Cladium mariscus (C. mariscus) for adsorption of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous systems. Among the experiments carried out, the elemental composition of C. mariscus was determined (C = 48.0 %, H = 7.1 %, N = 0.95 %, S = 0.4 %), FTIR spectroscopic analysis was performed to confirm the chemical structure of the adsorbent, and porous structure parameters were measured: BET surface area (A _BET  = 0.6 m²/g), total pore volume (V _p  = 0.001 cm³/g) and average pore size (S _p  = 6.6 nm). It was shown that the effectiveness of removal of 2,4-D from aqueous systems using C. mariscus depends on parameters of the process: contact time, system pH, mass of sorbent, and temperature. Maximum adsorption was attained for a solution at pH = 3. Further increase in the alkalinity of the tested systems led to a reduction in the effectiveness of the process. The kinetic of adsorption of 2,4-D by C. mariscus was also determined, and thermodynamic aspects were investigated. The experimental data obtained correspond to a pseudo-second-order kinetic model of type 1. Additionally the negative values obtained for ΔHº indicate that the process is exothermic, and the negative values of ΔGº show it to be spontaneous. As the temperature of the system increases the spontaneity of adsorption is reduced, in accordance with the exothermic nature of the process.     

Molecular and crystal structure of 15-acetylsongorine and songoramine isolated from <Emphasis Type="Italic">Aconitum szechenyianum</Emphasis> Gay

Two napelline skeletal diterpenoid alkaloids 15-acetylsongorine, C₂₄H₃₃NO₄ I, and songoramine, C₂₂H₂₉NO₃ II, were first isolated from the roots of Aconitum Szechenyianum Gay. The crystal structures were determined by X-ray single-crystal diffraction analysis. The crystal I is the triclinic system with space group P1 having unit cell parameters of a = 9.360(8) Å, b = 11.593(9) Å, c = 11.830(16) Å, α = 113.223(15)°, β = 105.950(16)°, γ = 101.296(12)°, and Z = 2. Hydrogen bonds O–H···O and O–H···N joint the molecules into dimer. The crystal II belongs to the orthorhombic system with space group P2₁2₁2₁ having unit cell parameters of a = 8.950(2) Å, b = 13.272(3) Å, c = 15.454(4) Å and Z = 4. The O–H···O hydrogen bonding interaction links the molecule into linear chains. The distortion of rings of compound I and II were evaluated by calculation of the Cremer and Pople puckering parameters. The presence of the C–O–C bond in the compound II results in the changes of ring conformations compared with that of the compound I.     

Synthesis,crystal structure of new linear trinuclear isovalence Co(II)([Co<Subscript>3</Subscript>(H–L)<Subscript>2</Subscript>(L)<Subscript>2</Subscript>]), and visualizing intermolecular interactions with Hirshfeld surface method

S-allyl-β-N-[(2-hydroxyphenyl)methylene]hyrazinecarbodithioate) (1, H₂L), the Schiff base of dithiocarbazate with unsaturated allyl substitution, can act as a new tridentate SNO ligand H₂–L and react with cobalt(II) nitrate hexahydrate to form the novel linear trinuclear isovalence Co(II) complex, [Co₃(H–L)₂(L)₂] 2C₂H₅OH (2). The compounds were characterized by elemental analysis, infrared, and ultraviolet spectroscopy. Compound 2 was also characterized by single-crystal X-ray analysis and crystallizes in the orthorhombic space group, Pbcn, with a = 30.643(1) Å, b = 9.118(4) Å, c = 19.017(7) Å, α = β = γ = 90°, V = 5312.95 Å³, Z = 4, and R ₁ = 0.0790, (wR ₂) = 0.1223. The six-coordinate central Co(II) atom is bonded to two deprotonated metal-containing ligands. The terminal Co(II) atoms are in a square planar SNON four-coordinate environment and connected to the central Co(II) by N-atoms from the ligand backbone. For quantifying the intermolecular interactions in crystal lattice, the new d _norm surface and the breakdown of fingerprint plots have been used for visualizing and exploring the compound 2.     

Blue Photoluminescent Dimeric Cu(I) Dithiophosphates Bridged by a Flexible Ligand 1,2-Bis(4-Pyridyl)Ethane

The title compound {Cu[S₂P(OC₂H₅)₂](bpe)} _n (1) is constructed from flexible ligand bpe (bpe = 1,2-bis(4-pyridyl)ethane) and the Cu[S₂P(OC₂H₅)₂], which was characterized by single crystal structure determination, elemental analysis, XRD, and IR spectra. X-ray diffraction studies revealed that polymeric compound 1 consists of dinuclear module to form 1-D chains with the intramolecular Cu···Cu interactions (ca. 2.63 Å). This interaction may show a profound influence on the observed blue luminescence emission spectrum for 1. Crystal data for 1 at 293(2) K: Space group P ? 1, a = 9.277(3), b = 10.504 (4), c = 31.801(1) Å, α = 92.849(3), β = 90.401(2), γ = 114.547(7)°, V = 2813.9(2) ų, Z = 2, R ₁ = 0.041.     

<Emphasis Type="Italic">Hypericum japonicum:</Emphasis> a Double-Headed Sword to Combat Vector Control and Cancer

Weissella cibaria RBA12 produced a maximum of 9 mg/ml dextran (with 90% efficiency) using shake flask culture under the optimized concentration of medium components viz. 2% (w/v) of each sucrose, yeast extract, and K₂HPO₄ after incubation at optimized conditions of 20 °C and 180 rpm for 24 h. The optimized medium and conditions were used for scale-up of dextran production from Weissella cibaria RBA12 in 2.5-l working volume under batch fermentation in a bioreactor that yielded a maximum of 9.3 mg/ml dextran (with 93% efficiency) at 14 h. After 14 h, dextran produced was utilized by the bacterium till 18 h in its stationary phase under sucrose depleted conditions. Dextran utilization was further studied by fed-batch fermentation using sucrose feed. Dextran on production under fed-batch fermentation in bioreactor gave 35.8 mg/ml after 32 h. In fed-batch mode, there was no decrease in dextran concentration as observed in the batch mode. This showed that the utilization of dextran by Weissella cibaria RBA12 is initiated when there is sucrose depletion and therefore the presence of sucrose can possibly overcome the dextran hydrolysis. This is the first report of utilization of dextran, post-sucrose depletion by Weissella sp. studied in bioreactor.