Structure,bioactivity and theoretical study of 1-cyano-<Emphasis Type="Italic">N</Emphasis>-p-tolylcyclo-propanecarboxamide

A novel cyclopropane derivative, 1-cyano-N-p-tolylcyclopropanecarboxamide (C₁₂H₁₂N₂O, Mr = 200.24) was synthesized and its structure was studied by X-ray diffraction, FTIR, ¹H and ¹³C NMR spectrum and MS. The crystals are monoclinic, space group P2_1/c with a = 7.109 (4), b = 13.758 (7), c = 11.505 (6) Å, α = 90.00, β = 102.731 (8), γ = 90.00 °, V = 1097.6 (9) ų, Z = 4, F(000) = 312, D _c  = 1.212 g/cm³, μ = 0.0800 mm^?1, the final R = 0.0490 and wR = 0.1480 for 1,375 observed reflections with I > 2σ(I). A total of 6,109 reflections were collected, of which 2,290 were independent (R _int = 0.0290). Theoretical calculation of the title compound was carried out with HF/6-31G (d,p), B3LYP/6-31G (d,p), MP2/6-31G (d,p). The full geometry optimization was carried out using 6-31G(d,p) basis set, and the frontier orbital energy. Atomic net charges were discussed, and the structure-activity relationship was also studied. The preliminary biological test showed that the synthesized compound is bioactive against the KARI of Escherichia coli.     

Synthesis,Crystal Structure and Catalytic Property of a New Cadmium Coordination Polymer

A new cadmium coordination polymer [Cd(L)(Cl)(H₂O)]_n (1) (L = 5-(imidazol-1-yl)-2-pyridine carboxylic anion) constructed from dinuclear cadmium clusters has been synthesized under hydrothermal condition and structurally characterized by single-crystal X-ray diffraction analysis. The compound crystallizes in triclinic system, space group P-1, with a = 6.8747(6), b = 9.7434(8), c = 9.9119(7) Å, α = 118.615(8)°, β = 104.445(7)°, γ = 94.815(7)°, V = 548.01(9) ų, Z = 2. Compound 1 is a one-dimensional (1D) double chain structure based on dinuclear [Cd₂(Cl)₂] clusters, and is further extended to a 3D supramolecular framework by hydrogen bonds. As a Lewis acid catalyst, compound 1 exhibits excellent catalytic performance for the acetalization reaction under mild conditions and can be reused several times without a significant decrease of the catalytic activity.     

Synthesis,crystal structure,and thermodynamics of a high-nitrogen copper complex with <Emphasis Type="Italic">N</Emphasis>, <Emphasis Type="Italic">N</Emphasis>-bis-(1(2)H-tetrazol-5-yl) amine

A new high-nitrogen complex [Cu(Hbta)₂]·4H₂O (H₂bta = N,N-bis-(1(2)H-tetrazol-5-yl) amine) was synthesized and characterized by elemental analysis, single crystal X-ray diffraction and thermogravimetric analyses. X-ray structural analyses revealed that the crystal was monoclinic, space group P2(1)/c with lattice parameters a = 14.695(3) Å, b = 6.975(2) Å, c = 18.807(3) Å, β = 126.603(1)°, Z = 4, D _c = 1.888 g cm^?3, and F(000) = 892. The complex exhibits a 3D supermolecular structure which is built up from 1D zigzag chains. The enthalpy change of the reaction of formation for the complex was determined by an RD496–III microcalorimeter at 25 °C with the value of ?47.905 ± 0.021 kJ mol^?1. In addition, the thermodynamics of the reaction of formation of the complex was investigated and the fundamental parameters k, E, n, \( \Updelta S_{ \ne }^{{{\uptheta}}} \), \( \Updelta H_{ \ne }^{{{\uptheta}}} \), and \( \Updelta G_{ \ne }^{{{\uptheta}}} \) were obtained. The effects of the complex on the thermal decomposition behaviors of the main component of solid propellant (HMX and RDX) indicated that the complex possessed good performance for HMX and RDX.     

Synthesis,spectroscopic characterization,crystal structures,and theoretical studies of (<Emphasis Type="Italic">E</Emphasis>)-2-(2,4-dimethoxybenzylidene)thiosemicarbazone and (<Emphasis Type="Italic">E</Emphasis>)-2-(2,5-dimethoxybenzylidene)thiosemicarbazone

Two thiosemicarbazones, (E)-2-(2,4-dimethoxybenzylidene)thiosemicarbazone (24-MBTSC (1)) and (E)-2-(2,5-dimethoxybenzylidene)thiosemicarbazone (25-MBTSC (2)), derived from 2,4-dimethoxybenzaldehyde and 2,5-dimethoxybenzaldehyde, respectively, with thiosemicarbazide have been synthesized and their structures were characterized by elemental analyses, FT-IR, ¹H NMR spectroscopy, and X-ray single-crystal diffraction analysis. Molecular orbital calculations have been carried out for 1 and 2 by using an ab initio method (HF) and also density functional method (B3LYP) at 6-31G basis set. Compound 1 crystallizes in the monoclinic system, space group P2₁/c, with a = 8.1342(5) Å, b = 18.1406(10) Å, c = 8.2847(6) Å, β = 109.7258(17)°, V = 1150.75(12) Å³, and Z = 4, whereas compound 2 crystallizes in the orthorhombic system, space group Pbca, with a = 11.0868(6) Å, b = 13.1332(6) Å, c = 15.9006(8) Å, V = 2315.2(2) Å³, and Z = 8. The compounds 1 and 2 displays a trans-configuration about the C=N double bond.     

Synthesis,characterization, antimicrobial activity and ultrastructure of the affected bacteria of new quinoline compounds

The reaction on 8-hydroxy quinoline-7-aldehyde azo compounds (HL _n ) (where n = 1–5) with 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one to obtain HL _n (where n = 6–10) have been characterized by means of TLC, melting point and spectral data, such as IR, ¹H NMR, mass spectra and thermal studies. The X-ray diffraction patterns of two starting materials 8-hydroxy quinoline-7-aldehyde (start 1), 4-amino-1,2-dihydro-2,3-dimethyl-1-phenylpyrazol-5-one (start 2) and the ligands (HL_5,10) are investigated in powder form. All the ligands have been screened for their antimicrobial activity against four local bacterial species, two Gram-positive bacteria (Bacillus cereus and Staphylococcus aureus) and two Gram-negative bacteria (Escherichia coli and Klebsiella pneumoniae) as well as against four local fungi; Aspergillus niger, Alternaria alternata, Penicillium italicum and Fusarium oxysporium. The results show that the azo ligands (HL _n ) (where n = 1–5) have no antimicrobial activity against bacteria and fungi while most azomethine ligands (HL _n ) (where n = 6–10) are good antibacterial agents against E. coli and K. pneumoniae as well as antifungal agents against P. italicum and A. alternata. The results were compared to standard substances (start 1) and (start 2). Among the azomethine ligands, HL₁₀ was the most effective against the most microorganisms tested. The size of clear zone was ordered as p-(OCH₃ < CH₃ < H < Cl < NO₂) as expected from Hammett’s constant (σ ^R ). Also, the ultrastructure study of the affected bacteria confirmed that HL₈ is good antibacterial agent against E. coli and S. aureus.     

<Emphasis Type="Italic">cis</Emphasis>-Dioxomolybdenum(VI) complexes of sterically encumbered phenol-based tetradentate N<Subscript>2</Subscript>O<Subscript>2</Subscript> ligands: Structural,spectroscopic, and electrochemical studies

Two cis-dioxomolybdenum(VI) complexes [MoO₂L] (L: L ¹, 2 and L: L ², 3) in a phenol-based sterically encumbered N₂O₂ ligand environment have been synthesized, and their crystallographic characterizations are reported. The orange crystals of 2 are monoclinic, space group P2₁/a with unit cell dimensions as a=16.2407(17) Å, b=7.2857(8) Å, c=18.400(2) Å, β=98.002(9)°, Z=4, and d _cal=1.486 g cm^?3. The light orange crystals of 3, however, are orthorhombic, space group, Pbcn, with unit cell dimensions a=8.3110(12) Å, b=12.637(3) Å, c=34.673(5) Å, Z=4, and d _cal=1.187 g cm^?3. The structures were refined by a full-matrix least-squares procedure on F ² to a final R=0.046 (0.055 for 3) using 4944 (3677) all independent data. In both the cases, the Mo atom exists in a distorted octahedral geometry defined by a N₂O₄ donor set, which features a cis-Mo(–O)₂ and a trans-Mo(OPh)₂ arrangement. Compound 2 undergoes a quasireversible one-electron reduction at ?1.3 V vs Ag/AgCl reference due to Mo^VIO₂/Mo^VO₂ electron transfer and thus providing a rare example of steric solution to the comproportionation–dimerization problem encountered frequently in the development of valid biomimetic models for the active sites of oxomolybdenum enzymes.     

Effect of temperature on longevity of <Emphasis Type="Italic">Diaphorina citri</Emphasis> (Hemiptera: Liviidae) studied by microcalorimeter

The longevity of Asian citrus psyllid, Diaphorina citri, infected by an entomopathogenic fungus, Isaria fumosorosea, was studied by microcalorimetry. Experimental results of microcalorimetry suggest that in the process of metabolism of D. citri heat or heat flow declined exponentially. The metabolism of D. citri inhibited by increasing temperature, and the longevity of D. citri decreased gradually with respect to temperature. The longevity of D. citri almost reaches 500 h at 25 °C and D. citri died within 130 h at 41 °C under high-temperature exposure. The same phenomenon, decrease in longevity and metabolism inhibition, was observed under the low-temperature exposure. The supercooling point of insects can be derived from a cooling curve plotting the temperature versus time by using microcalorimetry. The heat released due to phase change can be determined by using microcalorimeter. Our results indicated that microcalorimetry can be used to measure the metabolism of herbivore insects.     

Association of LIM Domain 7 Gene Polymorphisms and Plasma Levels of LIM Domain 7 with Dilated Cardiomyopathy in a Chinese Population

The aim of our study was to investigate the potential association of mRNA expression and plasma levels of the LIM domain 7 (LMO7) gene with the pathogenesis of dilated cardiomyopathy (DCM). Two SNPs of the LMO7 gene were genotyped in 310 patients with DCM and 415 controls. Our results showed that SNP rs7986131 (p = 0.002, OR = 1.38, 95% CI = 1.12–1.71), but not SNP rs4884021, was associated with DCM in the Han Chinese population. Haplotype analysis showed that the haplotype GT was associated with increased DCM susceptibility while AC was a protective haplotype. The Cox multivariate survival analysis indicated that the rs7986131 TT genotype (HR 1.659, 95% CI = 1.122–2.454, p = 0.011) was an independent multivariate predictor for shorter overall survival in patients with DCM. LMO7 mRNA expression and plasma LMO7 levels were significantly decreased in DCM (p < 0.0001). Spearman correlation test revealed that the plasma LMO7 level was negatively associated with left ventricular end-diastolic diameter (r = ?0.384, p = 0.01), left ventricular end-diastolic volume (r = ?0.375, p = 0.012), and brain natriuretic peptide (r = ?0.482, p = 0.001). Our study suggested that the LMO7 gene may play an important role in the pathogenesis of DCM in the Han Chinese population.     

Solubility of Genistin in Ethanol/Acetone + Water and Daidzein in Ethanol + Water Co-solvent Mixtures Revisited: IBKI Preferential Solvation Method

The preferential solvation parameters (δx_1,3) of genistin in ethanol/acetone (1) + water (2) and daidzein in ethanol (1) + water (2) co-solvent mixtures at elevated temperatures were derived from available solubility data using the inverse Kirkwood–Buff integral method. The values of δx_1,3 varied non-linearly with the co-solvent (1) proportion in all the aqueous mixtures. For the three co-solvent mixtures, the values of δx_1,3 were negative in water-rich mixtures, which indicated that daidzein or genistin was preferentially solvated by water and can act as Lewis bases to establish hydrogen bonds with the proton-donor functional groups of water (1). The same behavior was also observed for daidzein in ethanol (1) + water (2) and acetone (1) + water (2) mixtures with co-solvent-rich composition. For daidzein in ethanol (1) + water (2) mixtures with composition 0.24 < x₁ < 1, and genistin in ethanol (1) + water (2) and acetone (1) + water (2) mixtures with intermediate compositions, the local mole fractions of ethanol or acetone were higher than those of the mixtures and therefore the δx_1,3 values were positive, which indicated that genistin and daidzein were preferentially solvated by the co-solvent. In these regions, daidzein and genistin were acting as a Lewis acid with ethanol or acetone molecules.     

Synthesis,crystal structure,and hydrogen-bonded displacive-type structural phase transition of guanidine dichloroacetate

Guanidine dichloroacetate was synthesized and separated as crystals. Differential scanning calorimetry (DSC) measurement shows that this compound undergoes a reversible phase transition at about 275 K with a heat hysteresis of 28 K. Step-like dielectric anomaly observed at 274 K further confirms the phase transition. The single-crystal X-ray diffraction data suggested that these was a transition from a room-temperature phase with the space group of P2₁/n (a = 8.030(5), b = 12.014(9), c = 8.124(6) Å, β = 96.089(1)°, V = 779.3(1) Å³, and Z = 4) to a low-temperature one with the space group of P2₁/c (a = 7.941(2), b = 11.828(3), c = 10.614(2) Å, β = 130.985(1)°, V = 752.6(3) Å³, and Z = 4). The displacements of hydrogen bonds induce the structure phase transition.     

Study of the growth of <Emphasis Type="Italic">Enterococcus faecalis</Emphasis>, <Emphasis Type="Italic">Escherichia coli</Emphasis> and their mixtures by microcalorimetry

In a majority of environments, microbes live as interacting communities. Microbial communities are composed of a mix of microbes with often unknown functions. Polymicrobial diseases represent the clinical and pathological manifestations induced by the presence of multiple infectious agents. These diseases are difficult to diagnose and treat and usually are more severe than monomicrobial infections. The interaction relationship between Enterococcus faecalis and Escherichia coli was researched using a Calvet calorimeter. Three mixtures of both bacteria were prepared in the following proportions: 20 + 80 % (0.2 mL E. faecalis + 0.8 mL E. coli), 50 + 50 % (0.5 mL E. faecalis + 0.5 mL E. coli) and 80 + 20 % (0.8 mL E. faecalis + 0.2 mL E. coli). Experiments were carried out at concentration of 10⁶ CFU mL^?1 and a constant temperature of 309.65 K. The differences in shape of graph of E. faecalis, E. coli and their mixtures were compared. Also, the thermokinetic parameters such as detection time (t _d), growth constant (k), generation time (G) and the amount of heat released (Q) were calculated.     

Characterization of Truncated <Emphasis Type="Italic">dsz</Emphasis> Operon Responsible for Dibenzothiophene Biodesulfurization in <Emphasis Type="Italic">Rhodococcus</Emphasis> sp. FUM94

Numerous desulfurizing bacteria from the Rhodococcus genus harbor conserved dsz genes responsible for the degradation of sulfur compounds through 4S pathway. This study describes a newly identified desulfurizing bacterium, Rhodococcus sp. FUM94, which unlike previously identified strains encodes a truncated dsz operon. DNA sequencing revealed a frameshift mutation in the dszA gene, which led to an alteration of 66 amino acids and deletion of other C-terminal 66 amino acids. The resulting DszA polypeptide was shorter than DszA in Rhodococcus sp. IGTS8 reference strain. Despite the truncation, desulfurizing activity of the operon was observed and attributed to the removal of an overlap of dszA and dszB genes, and lack of active site in the altered region. Desulfurization experiments resulted in specific production rate of 6.3 mmol 2-hydroxy biphenyl (kgDCW)^?1 h^?1 at 2 g l^?1 biocatalyst concentration and 68.8% biodesulfurization yield at 20 g l^?1 biocatalyst concentration, both at 271 μM dibenzothiophene concentration which is comparable to similar wild-type biocatalysts.     

Structural and vibrational investigation of 1, 2-<Emphasis Type="Italic">bis</Emphasis>(3, 4-dimethoxyphenyl) ethane-1, 2-dione (Veratril): experimental and theoretical studies

The molecular and crystal structures of 1,2-bis(3,4-dimethoxyphenyl)ethane-1,2-dione (TMBZ = tetramethoxybenzil) were determined by a single-crystal X-ray diffraction, ¹H NMR, and FT-IR spectroscopy. The compound TMBZ (C₁₈H₁₈O₆, M _r = 330.32) crystallized in the orthorhombic Fdd2 space group wherein: a = 39.145(4), b = 18.167(2), c = 4.3139(5) Å and β = 90°, Z = 8. The packing of the molecules in the crystal lattice is stabilized by intermolecular C–H?O contacts in the herringbone arrangement. The molecular geometry and harmonic frequencies of TMBZ in the ground state were calculated utilizing density functional (B3LYP) method with the 6-311++G(d, p)-basis set. The density functional theory optimized the geometric structure, and vibrational wave numbers of TMBZ in gas phase were compared with the experimental data. A complete assignment of the fundamentals was proposed based on the total energy distribution calculation.     

A comparison of energy changes accompanying growth processes by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Calculations are made using the equations Δ_r G = Δ_r H ? TΔ_r S and Δ_r X = Δ_r H ? Δ_r Q where Δ_r X represents the free energy change when the exchange of absorbed thermal energy with the environment is represented by Δ_r Q. The symbol Q has traditionally represented absorbed heat. However, here it is used specifically to represent the enthalpy listed in tabulations of thermodynamic properties as (H _T  ? H ₀) at T = 298.15 K, the reason being that for a given substance TS equals 2.0 Q for solid substances, with the difference being greater for liquids, and especially gases. Since Δ_r H can be measured, and is tangibly the same no matter what thermodynamics are used to describe a reaction equation, a change in the absorbed heat of a biochemical growth process system as represented by either Δ_r Q or TΔ_r S would be expected to result in a different calculated value for the free energy change. Calculations of changes in thermodynamic properties are made which accompany anabolism; the formation of anabolic, organic by-products; catabolism; metabolism; and their respective non-conservative reactions; for the growth of Saccharomyces cerevisiae using four growth process systems. The result is that there is only about a 1% difference in the average quantity of free energy conserved during growth using either Eq. 1 or 2. This is because although values of TΔ_r S and Δ_r Q can be markedly different when compared to one another, these differences are small when compared to the value for Δ_r G or Δ_r X.     

Comparative Study on Different Expression Hosts for Alkaline Phytase Engineered in <Emphasis Type="Italic">Escherichia coli</Emphasis>

The application of alkaline phytase as a feed additive is restricted by the poor specific activity. Escherichia coli is a frequently used host for directed evolution of proteins including alkaline phytase towards improved activity. However, it is not suitable for production of food-grade products due to potential pathogenicity. To combine the advantages of different expression systems, mutants of the alkaline phytase originated from Bacillus subtilis 168 (phy168) were first generated via directed evolution in E. coli and then transformed to food-grade hosts B. subtilis and Pichia pastoris for secretory expression. In order to investigate the suitability of different expression systems, the phy168 mutants expressed in different hosts were characterized and compared in terms of specific activity, pH profile, pH stability, temperature profile, and thermostability. The specific activity of B. subtilis-expressed D24G/K70R/K111E/N121S mutant at pH 7.0 and 60 °C was 30.4 U/mg, obviously higher than those in P. pastoris (22.7 U/mg) and E. coli (19.7 U/mg). Moreover, after 10 min incubation at 80 °C, the B. subtilis-expressed D24G/K70R/K111E/N121S retained about 70 % of the activity at pH 7.0 and 37 °C, whereas the values were only about 25 and 50 % when expressed in P. pastoris and E. coli, respectively. These results suggested B. subtilis as an appropriate host for expression of phy168 mutants and that the strategy of creating mutants in one host and expressing them in another might be a new solution to industrial production of proteins with desired properties.     

Synthesis,structural phase transition,and characterization of potassium hydrogen bis-dichloroacetate

Potassium hydrogen bis-dichloroacetate (1) was synthesized and separated as crystals. Differential scanning calorimetry (DSC) measurement reveals that this compound undergoes a reversible phase transition at about 259 K with a heat hysteresis of 23.5 K. Dielectric anomaly observed at 260 K in the heating process further confirms the phase transition. The room temperature X-ray single-crystal structure determination indicates that 1 crystallizes in the monoclinic crystal system with a centrosymmetric space group P2₁/c, and cell parameters are a =?6.240(1), b =?23.177(4), c =?7.335(1) Å, β =?106.938(1)°, V =?1014.8(3) ų, and Z =?4. In the low temperature phase, 1 also crystallizes in monolinic with space group P2₁/c, and cell parameters are a =?6.180(1), b =?22.988(2), c =?7.200(1) Å, β =?108.098(1)°, V =?972.4(1) ų, and Z =?4. The structural phase transition is dominating caused by the torsion of bond angles.     

Production of <Emphasis Type="Italic">R</Emphasis>-Mandelic Acid Using Nitrilase from Recombinant <Emphasis Type="Italic">E. coli</Emphasis> Cells Immobilized with Tris(Hydroxymethyl)Phosphine

Recombinant Escherichia coli cells harboring nitrilase from Alcaligenes faecalis were immobilized using tris(hydroxymethyl)phosphine (THP) as the coupling agent. The optimal pH and temperature of the THP-immobilized cells were determined at pH 8.0 and 55 °C. The half-lives of THP-immobilized cells measured at 35, 40, and 50 °C were 1800, 965, and 163 h, respectively. The concentration of R-mandelic acid (R-MA) reached 358 mM after merely 1-h conversion by the immobilized cells with 500 mM R,S-mandelonitrile (R,S-MN), affording the highest productivity of 1307 g L^?1 day^?1 and the space-time productivity of 143.2 mmol L^?1 h^?1 g^?1. The immobilized cells with granular shape were successfully recycled for 60 batches using 100 mM R,S-MN as substrate at 40 °C with 64% of relative activity, suggesting that the immobilized E. coli cells obtained in this study are promising for the production of R-MA.     

Synthesis,structural, and electrochemical properties of NaCo(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> cathode for sodium-ion batteries

A new Co-base sodium metaphosphate compound, NaCo(PO₃)₃, has been synthesized here by solid-state method. The crystal structure is refined by the Rietveld method, and the results reveal that NaCo(PO₃)₃ has an orthorhombic structure with the space group of P2 ₁ 2 ₁ 2 ₁ and lattice parameters of a = 14.2453(2) Å, b = 14.2306(1) Å, and c = 14.2603(2) Å. Its typical morphology and chemical composition are confirmed by scanning electron microscopy (SEM) and energy-dispersive spectrometry (EDS). The valence states of all elements and the internal/external vibrational modes of NaCoP₃O₉ compound are measured by X-ray photoelectron and vibrational spectrum, where a typical feature of the (PO₃)^? polyanion group is observed. Meanwhile, the electrochemical properties of NaCo(PO₃)₃ cathode for sodium-ion batteries are also elevated and an initial discharge capacity of 33.8 mAh/g can be obtained at 0.05 C within 1.5–4.2 V. After 20 cycles, a discharge capacity of 26.7 mAh/g can be obtained and a well-kept oxidation–reduction plateau is still observed for NaCo(PO₃)₃ cathode, indicating the good reversibility of this metaphosphate electrode.     

Tetrakis [<Emphasis Type="Italic">N</Emphasis>-(2-pyridyl) sulfonamide] di palladium: synthesize,X-ray diffraction,antibacterial properties and as a novel binuclear Pd-complex for coupling reactions

The N-(2-pyridyl) 4-toluene sulfonamide as a free ligand (PTS) was prepared from the reaction of 2-amino pyridine and 4-toluenesulfonyl chloride in the presence of potassium hydroxide solution 1 M as a base and THF was used as a solvent. The complex tetrakis [N-(2-pyridyl) sulfonamide] di palladium (1) (Pd₂L₄) was also prepared from the reaction of PdCl₂(CH₃CN)₂ using (PTS) in the presence of NaOH 0.5 M and its application in Heck and Suzuki reactions. This complex consists of a binuclear unit consisting of four ligands linked to two palladium atoms via the nitrogen of pyridines ring and the nitrogen of sulfonamides. These compounds were confirmed by FT-IR and ¹H NMR spectroscopy. Moreover, the structure of the complex was studied by single-crystal X-ray diffraction method. The green crystal of Pd₂L₄ [L = N-(2-pyridyl) sulfonamide](1) was found to crystallize in the monoclinic space group C2/c with a = 18.2013(19), b = 19.7544(16), c = 17.2898(19) Å, β = 120.179(8) °; V = 5374.0(9) ų; Z = 4; the final R ₁ = 0.0894, wR ₂ = 0.1754 (or 5867 observed reflections and 318 variables). The Pd–Pd distance is 2.567(2) Å. In addition, PTS and Pd₂L₄ presented different antibacterial behaviors. The free ligand was active against Staphylococcus aureus and Escherichia coli, but the complex was inactive against them.     

Saw-sedge <Emphasis Type="Italic">Cladium mariscus</Emphasis> as a functional low-cost adsorbent for effective removal of 2,4-dichlorophenoxyacetic acid from aqueous systems

For the first time in the published literature, a study is described concerning the use of the saw-sedge Cladium mariscus (C. mariscus) for adsorption of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous systems. Among the experiments carried out, the elemental composition of C. mariscus was determined (C = 48.0 %, H = 7.1 %, N = 0.95 %, S = 0.4 %), FTIR spectroscopic analysis was performed to confirm the chemical structure of the adsorbent, and porous structure parameters were measured: BET surface area (A _BET  = 0.6 m²/g), total pore volume (V _p  = 0.001 cm³/g) and average pore size (S _p  = 6.6 nm). It was shown that the effectiveness of removal of 2,4-D from aqueous systems using C. mariscus depends on parameters of the process: contact time, system pH, mass of sorbent, and temperature. Maximum adsorption was attained for a solution at pH = 3. Further increase in the alkalinity of the tested systems led to a reduction in the effectiveness of the process. The kinetic of adsorption of 2,4-D by C. mariscus was also determined, and thermodynamic aspects were investigated. The experimental data obtained correspond to a pseudo-second-order kinetic model of type 1. Additionally the negative values obtained for ΔHº indicate that the process is exothermic, and the negative values of ΔGº show it to be spontaneous. As the temperature of the system increases the spontaneity of adsorption is reduced, in accordance with the exothermic nature of the process.