与胶原特异性结合的BMP2模拟肽/PLGA 3D打印复合支架的制备及成骨诱导活性

将胶原绑定结构域(CBD)多肽序列与骨形态发生蛋白2模拟肽(BMP2-MP)序列连接制备具有胶原绑定能力的CBD-BMP2-MP, 再将CBD-BMP2-MP与聚丙交酯-乙交酯/胶原(PLGA/COL)3D打印支架相结合, 以支架表面的胶原成分为媒介, 将CBD-BMP2-MP更有效地固定于骨修复材料上, 达到对其进行改性的目的. 利用扫描电子显微镜(SEM)、 电子万能试验机和接触角测量仪对复合支架表面形貌、 力学强度和亲水性等材料学性能进行评价. 用荧光成像法评测 CBD-BMP2-MP及BMP2-MP与支架材料的结合能力. 在各组支架材料表面接种MC3T3-E1细胞进行体外培养, 采用CCK-8、 鬼笔环肽荧光染色、 茜素红染色及qPCR综合评价细胞在材料表面的黏附、 增殖和成骨分化等细胞行为, 研究CBD-BMP2-MP修饰的3D多孔PLGA/COL复合支架的生物学性能. 研究结果表明, 利用3D打印技术制备的多孔支架具有形貌可控的孔隙结构, 为细胞生长创造更有利的细胞微环境, 支架表面胶原成分的加入提高了支架材料的亲水性, 同时对支架材料本身的力学性能无任何影响, 提高了复合支架本身的生物相容性. 与普通BMP2-MP相比, CBD-BMP2-MP具有更好的胶原绑定能力, 与复合支架的结合更稳定, 提高了PLGA/COL复合支架对BMP2-MP的负载能力. 支架表面负载CBD-BMP2-MP后具有极强的促细胞成骨分化能力. MC3T3-E1细胞表现出更高的钙沉积能力, 并且成骨分化相关基因Runx2, ALP, COL-I及OPN等水平也有了明显提升. 表明CBD-BMP2-MP多孔复合支架具有良好的生物相容性和成骨诱导活性, 在骨组织修复领域具有良好的应用前景.     

Regulation of cellular responses to macroporous inorganic films prepared by the inverse-opal method

Regenerative medicine for repairing damaged body tissues has recently become critically important. Cell culture scaffolds are required for the control of cell attachment, proliferation, and differentiation in in vitro cell cultures. A new strategy to control cell adhesion, morphology, and proliferation was developed by culturing mouse osteoblast-like MC3T3-E1 cells on novel cell culture scaffolds fabricated using ordered nanometer-sized pores (100, 300, 500, and 1000 nm). Results of this study indicate that after 72 h of incubation, the number of cells cultured on a silica film with a pore size of 1000 nm was similar to or slightly lower than that cultured on a non-porous control silica film. Films with 100-500 nm pore sizes, however, resulted in the cell growth inhibition. Morphology of the cultured cells revealed increased elongation and the formation of actin stress fibers was virtually absent on macroporous silica films with 100-500 nm pore size. Vinculin molecules expressed in cells cultured on the non-porous silica films showed many clear focal adhesions, whereas focal contacts were insufficiently formed in cells cultured on macroporous films. The influence of hydroxyapatite (HAp) and alumina scaffolds on the behavior of MC3T3-E1 cells was also evaluated. The proliferation rate of MC3T3-E1 cells cultured on HAp films with 1000 nm pore size was increased to approximately 20% above than that obtained of cells cultured on non-porous HAp films. These results demonstrate that the pore size and constituents of films play a role in controlling the morphology and proliferation rate of MC3T3-E1 cells.     

HPMC crosslinked chitosan/hydroxyapatite scaffolds containing Lemongrass oil for potential bone tissue engineering applications

The chitosan (CS), hydroxypropyl methyl cellulose (HPMC), hydroxyapatite (HAp and Lemon grass oil (LGO) based scaffolds was prepared by freeze gelation method. The composite formation was confirmed by FTIR (Fourier-transform infrared spectroscopy) analysis and surface morphology was evaluated by SEM (Scanning Electron Microscopy) analysis. The mechanical strength, biodegradation, swelling, porosity and antibacterial activity were evaluated on the basis of LGO contents. The scaffold structure was porous and the mechanical strength was enhanced as a function of LGO contents. The scaffold properties analysis revealed the biodegradation nature and swelling behavior of CS-HPMC-HAp-LGO was also affected significantly as a function of LGO contents. The cytotoxicity of CS-HPMC-HAp-LGO was studied against MC3T3-E1 cells and based on cell viability, no toxic sign was observed. The antimicrobial activity was evaluated against S. aureus and CS-HPMC-HAp-LGO scaffolds showed promising activity, which was varied as a function of LGO contents. The findings revealed that the CS-HPMC-HAp-LGO are biocompatible and have potential for bone tissue engineering.     

Preparation,mechanical properties and biocompatibility of graphene oxide/ultrahigh molecular weight polyethylene composites

Graphene oxide (GO)/ultrahigh molecular weight polyethylene (UHMWPE) composites were prepared by liquid-phase ultrasonication dispersion followed by hot-pressing. The microstructure features and mechanical properties of the composites were investigated by scanning electron microscope (SEM) and universal testing machine, respectively. Moreover, the attachment and proliferation of the MC3T3-E1 osteoblasts on the composites’ surfaces were investigated by methyl thiazolyl tetrazolium assay, SEM and fluorescence staining observations to evaluate the biocompatibility of the GO/UHMWPE composites. As shown in the cross-section SEM images, GO sheets were well dispersed within the UHMWPE matrix. The addition of GO sheets up to 1.0 wt.% not only increased the hardness of the pure UHMWPE gradually, but also improved its yield strength slightly. The MC3T3-E1 cells well attached and grew on the surfaces of the composites, and the adding of GO did not affect the cells’ morphology and viability. The GO/UHMWPE composites displayed a remarkable combination of enhanced mechanical properties and good biocompatibility, making the composites attractive for potential candidate as artificial joints in the human body.     

In vitro Degradation and Biocompatibility of Ca-P Coated Magnesium Alloy

Calcium-phosphate compounds(Ca-P) coating was prepared on an Mg-Al alloy(AZ60). Biodegradation of Ca-P coated magnesium alloy was evaluated in simulated body fluid(SBF) by examining the changes in magnesium ion concentration and pH value, which indicated that the Ca-P coating on magnesium alloy strongly affected the corrosion of magnesium alloy. Osteoblast MC3T3-E1 cells were utilized to investigate the cellular cytocompatibility. The cytocompatibility was measured by carrying out a series of tests, such as cholecystokinin-octapeptide(CCK-8) test, alkaline phosphatase activity(ALP) test, cellular morphology of hematoxylin-eosin(HE) staining and the induction of apoptosis. It was found that the cell function showed better in the Ca-P coated Mg-alloy extract than in the uncoated magnesium alloy extract. In summary, the results indicate that the Ca-P coating can improve the corrosion resistance of magnesium alloy and elevate cellular proliferation and differentiation of osteoblast MC3T3-E1 cells.     

Oxygen Plasma Technology-Assisted Preparation of Three-Dimensional Reduced Graphene Oxide/Polypyrrole/Strontium Composite Scaffold for Repair of Bone Defects Caused by Osteoporosis

Repairs of bone defects caused by osteoporosis have always relied on bone tissue engineering. However, the preparation of composite tissue engineering scaffolds with a three-dimensional (3D) macroporous structure poses huge challenges in achieving osteoconduction and osteoinduction for repairing bone defects caused by osteoporosis. In the current study, a three-dimensional macroporous (150–300 μm) reduced graphene oxide/polypyrrole composite scaffold modified by strontium (Sr) (3D rGO/PPY/Sr) was successfully prepared using the oxygen plasma technology-assisted method, which is simple, safe, and inexpensive. The findings of the MTT assay and AO/EB fluorescence double staining showed that 3D rGO/PPY/Sr has a good biocompatibility and effectively promoted MC3T3-E1 cell proliferation. Furthermore, the ALP assay and alizarin red staining showed that 3D rGO/PPY/Sr increased the expression levels of ALP activity and the formation of calcified nodules. The desirable biocompatibility, osteoconduction, and osteoinduction abilities, assure that the 3D macroporous rGO/PPY/Sr composite scaffold offers promising potential for use in the repair of bone defects caused by osteoporosis in bone tissue engineering.     

Emodin-8-O-β-D-glucoside from Polygonum amplexicaule D. Don var. sinense Forb. promotes proliferation and differentiation of osteoblastic MC3T3-E1 cells

Polygonum amplexicaule D. Don var. sinense Forb. (Polygonaceae) (PAF) is a famous traditional herb used to treat fractures, rheumatoid arthritis, muscle injury and pain. The present study was designed to investigate a PAF derived-chemical compound emodin-8-O-β-D-glucoside (EG) on the proliferation and differentiation of osteoblastic MC3T3-E1 cell in vitro. A compound was isolated from PAF extract by HPLC and identified as emodin-8-O-β-D-glucoside (EG) by spectroscopic methods. EG significantly promoted cell proliferation at 0.1-100 ng/mL, and increased the cell proportion in S-phase from 16.34% to 32.16%. Moreover, EG increased alkaline phosphatase (ALP) expression in MC3T3-E1 cells at the concentration from 0.1 to 100 ng/mL and inhibited PGE(2 )production induced by TNF-α in osteoblasts at the concentrations ranging from 10-100 ng/mL, suggesting that cell differentiation was induced in MC3T3-E1 osteoblasts. Taken together, these results indicated compound EG directly stimulated cell proliferation and differentiation of osteoblasts, therefore this study preliminarily explored the pharmacological mechanism of PAF to promote the healing of bone rheumatism and various fractures.     

Effects of combined mechanical stimulation on the proliferation and differentiation of pre-osteoblasts

We observed how combined mechanical stimuli affect the proliferation and differentiation of pre-osteoblasts. For this research, a bioreactor system was developed that can simultaneously stimulate cells with cyclic strain and ultrasound, each of which is known to effectively stimulate bone tissue regeneration. MC3T3-E1 pre-osteoblasts were chosen for bone tissue engineering due to their osteoblast-like characteristics. 3-D scaffolds were fabricated with polycaprolactone and poly-L-lactic acid using the salt leaching method. The cells were stimulated by the bioreactor with cyclic strain and ultrasound. The bioreactor was set at a frequency of 1.0 Hz and 10 % strain for cyclic strain and 1.0 MHz and 30 mW/cm(2) for ultrasound. Three experimental groups (ultrasound, cyclic strain, and combined stimulation) and a control group were examined. Each group was stimulated for 20 min/day. Mechanical stimuli did not affect MC3T3-E1 cell proliferation significantly up to 10 days when measured with the cell counting kit-8. However, gene expression analysis of collagen type-I, osteocalcin, RUNX2, and osterix revealed that the combined mechanical stimulation accelerated the matrix maturation of MC3T3-E1 cells. These results indicate that the combined mechanical stimulation can enhance the differentiation of pre-osteoblasts more efficiently than simple stimuli, in spite of no effect on cell proliferation.     

An MC3T3-E1 Cell Line Biomembrane Extraction and HPLC–ESI-MS n Method for Simultaneous Analysis of Potential Anti-Osteoporosis Components of Epimedium koreanum

Aerial parts of Epimedium koreanum Nakai have been used as Herba Epimedii in China. Its anti-osteoporosis effect has attracted much attention in recent years. In this study, a method involving osteoblastic cell (MC3T3-E1 cell line) extraction and high-performance liquid chromatography–electrospray ionisation–mass spectrometry (HPLC–ESI-MS ⁿ ) was developed for screening of potential anti-osteoporosis agents in E.?koreanum. Four compounds identified as epimedin?A, epimedin?B, epimedin?C and icariin were found to interact with MC3T3-E1 cells and possessed potent osteoblast-stimulating activity as evaluated by cell proliferation [3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay] and differentiation [alkaline phosphatase (ALP) activity and Ca content] in?vitro. The results suggest that these four flavonoids are the anti-osteoporosis constituents of Herba Epimedii and that the method combining MC3T3-E1 cell extraction with HPLC–ESI-MS ⁿ is rapid and effective in screening anti-osteoporosis agents from traditional Chinese medicines.     

An MC3T3-E1 Cell Line Biomembrane Extraction and HPLC–ESI-MS n Method for Simultaneous Analysis of Potential Anti-Osteoporosis Components of Epimedium koreanum

Aerial parts of Epimedium koreanum Nakai have been used as Herba Epimedii in China. Its anti-osteoporosis effect has attracted much attention in recent years. In this study, a method involving osteoblastic cell (MC3T3-E1 cell line) extraction and high-performance liquid chromatography–electrospray ionisation–mass spectrometry (HPLC–ESI-MSⁿ) was developed for screening of potential anti-osteoporosis agents in E. koreanum. Four compounds identified as epimedin A, epimedin B, epimedin C and icariin were found to interact with MC3T3-E1 cells and possessed potent osteoblast-stimulating activity as evaluated by cell proliferation [3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay] and differentiation [alkaline phosphatase (ALP) activity and Ca content] in vitro. The results suggest that these four flavonoids are the anti-osteoporosis constituents of Herba Epimedii and that the method combining MC3T3-E1 cell extraction with HPLC–ESI-MSⁿ is rapid and effective in screening anti-osteoporosis agents from traditional Chinese medicines.

     

Development of sodium alginate-xanthan gum based nanocomposite scaffolds reinforced with cellulose nanocrystals and halloysite nanotubes

Sodium alginate (Alg) and xanthan gum (XG) based nanocomposite scaffolds reinforced with various amounts of cellulose nanocrystals (CNCs) and/or halloysite nanotubes (HNTs) were prepared by freeze-casting/drying method. In this study, the structure-property-performance relationship was mainly focused and analysed. Morphological analysis showed high porosity and pore-interconnectivity (pore channels) in all obtained scaffolds. Structural analysis demonstrates the good interfacial interactions and uniform dispersion of the CNCs and HNTs, involving partial orientation within the polymeric network. The water uptake capacity (from 14.73.7 ± 0.46 g/g to 11.34 ± 0.32 g/g) and porosity (from 91.7 ± 0.81% to 88.5 ± 0.64%) were reduced. The compressive strengths (in dry state from 91.1 ± 1.2 kPa to 114.4 ± 0.6 kPa and in wet state from 9.0 ± 0.8 kPa to 10.6 ± 0.8 kPa), thermal stability, cytocompatibility (MC3T3-E1 osteoblastic cells) of the nanocomposite scaffolds improved as compared to Alg and AlgX scaffolds without CNCs and/or HNTs. The obtained scaffolds may be appropriate as scaffolding material in bone tissue engineering.     

Engineered 3D-Printed Polyvinyl Alcohol Scaffolds Incorporating β-Tricalcium Phosphate and Icariin Induce Bone Regeneration in Rat Skull Defect Model

The skull defects are challenging to self-heal, and autologous bone graft repair has numerous drawbacks. The scaffolds for the rapid and effective repair of skull defects have become an important research topic. In this study, polyvinyl alcohol (PVA)/β-tricalcium phosphate(β-TCP) composite scaffolds containing icariin (ICA) were prepared through direct-ink three-dimensional (3D) printing technology. β-TCP in the composite scaffold had osteoconductive capability, and the ICA molecule had osteoinductive capacity. The β-TCP and ICA components in the composite scaffold can enhance the capability to repair skull defects. We show that ICA exhibited a slow-release behaviour within 80 days. This behaviour helped the scaffold to continuously stimulate the formation of new bone. The results of in vitro cell compatibility experiments showed that the addition of ICA molecules contributed to the adhesion and proliferation of MC-3T3-E1 cells. The level of alkaline phosphatase secretion demonstrated that the slow release of ICA can promote the osteogenic differentiation of MC-3T3-E1 cells. The introduction of ICA molecules accelerated the in situ bone regeneration in in vivo. It is concluded that the 3D-printed PVA scaffold with β-TCP and ICA has a wide range of potential applications in the field of skull defect treatment.     

Morphological,mechanical, and in vitro cytocompatibility analysis of poly(vinyl alcohol)–silica glass hybrid scaffolds reinforced with cellulose nanocrystals

Cellulose nanocrystal-reinforced poly(vinyl alcohol)/silica glass hybrid scaffolds were fabricated using the freeze-drying method. In this study, we develop molecular-level-based hybrid scaffolds with possible bioactivity behavior by adding silica sol–gel. The results showed a highly porous structure and a significant improvement in mechanical performance (stiffness) of hybrid scaffolds with an increased content of cellulose nanocrystals followed by the addition of silica-based bioactive glass. In vitro cell study with MC3T3-E1 cells on hybrid scaffolds for 1 and 3 days revealed good cell adhesion and growth. Thus, the obtained hybrid scaffold may be a competitive candidate for bone tissue engineering applications.     

Protection by the flavonoids quercetin and luteolin against peroxide- or menadione-induced oxidative stress in MC3T3-E1 osteoblast cells

Potential protective effects of the flavonoids quercetin and luteolin have been examined against the oxidative stress of MC3T3-E1 osteoblast-like cells. Although hydrogen peroxide and menadione reduced cell viability, the toxicity was prevented by desferrioxamine or catalase but not superoxide dismutase, suggesting the involvement of hydrogen peroxide in both cases. Quercetin and luteolin reduced the oxidative damage, especially that caused by hydrogen peroxide. When cultures were pre-incubated with quercetin or luteolin, protection was reduced or lost. Protection was also reduced when a 24 h pre-incubation with the flavonoids was followed by exposure to menadione alone. Pretreating cultures with luteolin impaired protection by quercetin, whereas quercetin pretreatment did not affect protection by luteolin. It is concluded that quercetin and luteolin suppress oxidative damage to MC3T3-E1 cells, especially caused by peroxide. The reduction in protection by pretreatment implies a down-regulation of part of the toxic transduction pathway.     

Amphirionin-5, a novel linear polyketide from a cultured marine dinoflagellate Amphidinium species with a potent cell proliferation-promoting activity

A novel linear polyketide, amphirionin-5 (1), has been isolated from the cultivated algal cells of the benthic dinoflagellate Amphidinium sp. (strain KCA09053), and the structure was elucidated on the basis of detailed analyses of 1D and 2D NMR data. Amphirionin-5 (1) resulted in a 282% increase in the proliferation of murine bone-marrow derived stromal ST-2 cells and 320% increase in the proliferation of murine osteoblastic MC3T3-E1 cells.     

The pharmacological effects of morroniside and loganin isolated from Liuweidihuang Wan, on MC3T3-E1 cells

Liuweidihuang wan (LW), initially a well-known formula for curing "wu chi wu ruan", is commonly used nowadays for clinical treatment of postmenopausal osteoporosis (PO), but the identity of the effective substance(s) remains unclear. The present study was designed to evaluate the effects of morroniside and loganin isolated from LW on the proliferation, differentiation and apoptosis of MC3T3-E1 cells, as well as the possible mechanism of action. Morroniside and loganin had no effects on the proliferation of MC3T3-E1 cells, but both susbtances could improve the activity of alkaline phosphatase (ALP), and increase the contents of collagen type I and osteocalcin. Simultaneously, the mRNA expression of caspase-3, capase-9, RANKL was down-regulated and that of bcl-2 was up-regulated, which partially explains the anti-osteoporosis mechanism in MC3T3-E1 cells. In conclusion, morroniside and loganin may directly promote the differentiation and inhibit the apoptosis of MC3T3-E1 cells, and accordingly indirectly reduce bone resorption, which makes them promising natural drugs leads for treating PO in the near future.     

聚酯多孔支架降解液对骨髓基质干细胞活力和成骨分化的影响

通过室温模压/粒子浸出方法制备得到聚乙交酯丙交酯(PLGA)多孔支架,每个质量50 mg、孔径200～300μm、孔隙率略大于90%的PLGA85/15多孔支架在10 mL磷酸盐缓冲液(PBS)中37℃体外降解24周.降解液每周换一次,不同时间点的降解液被收集、并加入骨髓基质干细胞(MSC)的培养液或者成骨诱导液中,利用胞外乳酸脱氢酶含量检测、细胞死活染色、四唑盐检测、碱性磷酸酶染色和定量检测的方法考察降解液对MSC的活力和成骨分化能力的影响.实验结果表明,PLGA多孔支架材料在PBS中逐渐降解,其质量、尺寸、孔径、孔与孔的连通性、分子量有不同程度的降低;其降解液在本研究的实验条件下未发现对MSC有明显的细胞毒性,对MSC的活力、增殖以及成骨分化均无显著的负面影响.     

In vitro Evaluation of Osteoblast Response to Sol-Gel Derived Gelatin-Siloxane Hybrids

Cytotoxicity and cytocompatibility of porous gelatin-siloxane hybrids were evaluated due to osteoblastic cell (MC3T3-E1) proliferation, ALP activity, or their responses to the hybrids and their extracts. The hybrids were found intoxic, and appropriate incorporation of calcium ions stimulated proliferation and differentiation in vitro. Cells were seeded into the porous hybrids and the cell morphology was studied. The hybrids involving calcium ions favored osteoblast growth and differentiation.     

Chemical constituents from the leaves of Manglietia phuthoensis and their effects on osteoblastic MC3T3-E1 cells

Two new phenyl glycosides, mangliesides A and B (1, 2), a new ionol glycoside, manglieside C (3), two new lignan glycosides, mangliesides D and E (4, 5), were isolated from the leaves of Manglietia phuthoensis, along with two known lignans, 3-methoxymagnolol (6) and obovatol (7). Their structures were established by means of 1D and 2D NMR, electrospray ionization (ESI)-MS and HR-ESI-MS experiments. Among them, compounds 2 and 5 significantly (p<0.05) increased the growth and differentiation of osteoblastic MC3T3-E1 cells in vitro.