Production and Biotechnological Application of Extracellular Alkalophilic Lipase from Marine Macroalga-Associated <Emphasis Type="Italic">Shewanella algae</Emphasis> to Produce Enriched C<Subscript>20-22</Subscript><Emphasis Type="Italic">n</Emphasis>-3 Polyunsaturated Fatty Acid Concentrate

An extracellular alkalophilic lipase was partially purified from heterotrophic Shewanella algae (KX 272637) associated with marine macroalgae Padina gymnospora. The enzyme possessed a molecular mass of 20 kD, and was purified 60-fold with a specific activity of 36.33 U/mg. The enzyme exhibited V_max and K_m of 1000 mM/mg/min and 157 mM, respectively, with an optimum activity at 55 °C and pH 10.0. The catalytic activity of the enzyme was improved by Ca²⁺ and Mg²⁺ ions, and the enzyme showed a good tolerance towards organic solvents, such as methanol, isopropanol, and ethanol. The purified lipase hydrolyzed the refined liver oil from leafscale gulper shark Centrophorus squamosus, yielding a total C_20-22 n-3 PUFA concentration of 34.99% with EPA + DHA accounting the major share (34% TFA), after 3 h of hydrolysis. This study recognized the industrial applicability of the thermostable and alkalophilic lipase from marine macroalga-associated bacterium Shewanella algae to produce enriched C_20-22 n-3 polyunsaturated fatty acid concentrate.     

Extraction of Oil from Flaxseed (<Emphasis Type="Italic">Linum usitatissimum</Emphasis> L.) Using Enzyme-Assisted Three-Phase Partitioning

In this study, enzyme-assisted three-phase partitioning (EATPP) was used to extract oil from flaxseed. The whole procedure is composed of two parts: the enzymolysis procedure in which the flaxseed was hydrolyzed using an enzyme solution (the influencing parameters such as the type and concentration of enzyme, temperature, and pH were optimized) and three-phase partitioning (TPP), which was conducted by adding salt and t-butanol to the crude flaxseed slurry, resulting in the extraction of flaxseed oil into alcohol-rich upper phase. The concentration of t-butanol, concentration of salt, and the temperature were optimized to maximize the extraction yield. Under optimized conditions of a 49.29 % t-butanol concentration, 30.43 % ammonium sulfate concentration, and 35 °C extraction temperature, a maximum extraction yield of 71.68 % was obtained. This simple and effective EATPP can be used to achieve high extraction yields and oil quality, and thus, it is potential for large-scale oil production.     

Modification of silicon-substituted polynorbornenes by epoxidation of main chain double bonds

Postpolymerization modification of metathesis Si-containing polynorbornenes by epoxidation of double bonds of the main chain was carried out for the first time. New polynorbornenes containing one or two side Me₃Si substituents in a monomer unit and oxirane fragments in the main chain were obtained and characterized. Some features of epoxidation of polynorbornenes by 1.1-dimethyldioxirane (formed in situ) or m-chloroperbenzoic acid were studied. It was shown that m-chloroperbenzoic acid was an effective epoxidation agent, which did not affect Si?C bonds in polynorbornenes. It was found that the preparation of high-molecular-weight epoxidated polynorbornenes required one to introduce an oxidation inhibitor into the reaction mixture and to perform the reaction in toluene. Chlorine-containing solvents, such as chloroform and chlorobenzene, promoted the destruction of polynorbornenes. It was shown that the introduction of oxirane fragments into the polynorbornene main chain increased its T _g by 15?40°C.     

Study of the growth of <Emphasis Type="Italic">Enterococcus faecalis</Emphasis>, <Emphasis Type="Italic">Escherichia coli</Emphasis> and their mixtures by microcalorimetry

In a majority of environments, microbes live as interacting communities. Microbial communities are composed of a mix of microbes with often unknown functions. Polymicrobial diseases represent the clinical and pathological manifestations induced by the presence of multiple infectious agents. These diseases are difficult to diagnose and treat and usually are more severe than monomicrobial infections. The interaction relationship between Enterococcus faecalis and Escherichia coli was researched using a Calvet calorimeter. Three mixtures of both bacteria were prepared in the following proportions: 20 + 80 % (0.2 mL E. faecalis + 0.8 mL E. coli), 50 + 50 % (0.5 mL E. faecalis + 0.5 mL E. coli) and 80 + 20 % (0.8 mL E. faecalis + 0.2 mL E. coli). Experiments were carried out at concentration of 10⁶ CFU mL^?1 and a constant temperature of 309.65 K. The differences in shape of graph of E. faecalis, E. coli and their mixtures were compared. Also, the thermokinetic parameters such as detection time (t _d), growth constant (k), generation time (G) and the amount of heat released (Q) were calculated.     

Cotton Stalk Pretreatment Using <Emphasis Type="Italic">Daedalea flavida</Emphasis>, <Emphasis Type="Italic">Phlebia radiata</Emphasis>, and <Emphasis Type="Italic">Flavodon flavus</Emphasis>: Lignin Degradation,Cellulose Recovery,and Enzymatic Saccharification

Lignocellulolytic enzyme activities of selective fungi Daedalea flavida MTCC 145 (DF-2), Phlebia radiata MTCC 2791 (PR), and non-selective fungus Flavodon flavus MTCC 168 (FF) were studied for pretreatment of cotton stalks. Simultaneous productions of high LiP and laccase activities by DF-2 during early phase of growth were effective for lignin degradation 27.83 ± 1.25 % (w/w of lignin) in 20-day pretreatment. Production of high MnP activity without laccase in the early growth phase of PR was ineffective and delayed lignin degradation 24.93 ± 1.53 % in 25 days due to laccase production at later phase. With no LiP activity, low activities of MnP and laccase by FF yielded poor lignin degradation 15.09 ± 0.6 % in 20 days. Xylanase was predominant cellulolytic enzyme produced by DF-2, resulting hemicellulose as main carbon and energy source with 83 % of cellulose recovery after 40 days of pretreatment. The glucose yield improved more than two fold from 20-day DF-2 pretreated cotton stalks after enzymatic saccharification.     

Purification and Characterization of a Naringinase from <Emphasis Type="Italic">Cryptococcus albidus</Emphasis>

Naringinase which was extracted from the fermented broth of Cryptococcus albidus was purified about 42-folds with yield 0.7% by sulfate fractionation and chromatography on Toyopearl HW-60, Fractogel DEAE-650-s, and Sepharose 6B columns. Molecular weight of protein determined by gel filtration and SDS-PAGE was 50 kDa. Naringinase of C. albidus includes high content of the dicarbonic and hydrophobic amino acids. Enzyme contains also carbohydrate component, represented by mannose, galactose, rhamnose, ribose, arabinose, xylose, and glucose. The enzyme was optimally active at pH 5.0 and 60 °C. Naringinase was found to exhibit specificity towards p-nitrophenyl-α-L-rhamnose, p-nitrophenyl-β-D-glucose, naringin, and neohesperidin. Its K _m towards naringin was 0.77 mM and the V _max was 36 U/mg. Naringinase was inhibited by high concentrations of reaction product—L-rhamnose. Enzyme revealed stability to 20% ethanol and 500 mM glucose in the reaction mixture that makes it possible to forecast its practical use in the food industry in the production of juices and wines.     

Heterologous Expression of Aldehyde Dehydrogenase in <Emphasis Type="Italic">Lactococcus lactis</Emphasis> for Acetaldehyde Detoxification at Low pH

Aldehyde dehydrogenase (E.C. 1.2.1.x) can catalyze detoxification of acetaldehydes. A novel acetaldehyde dehydrogenase (istALDH) from the non-Saccharomyces yeast Issatchenkia terricola strain XJ-2 has been previously characterized. In this work, Lactococcus lactis with the NIsin Controlled Expression (NICE) System was applied to express the aldehyde dehydrogenase gene (istALDH) in order to catalyze oxidation of acetaldehyde at low pH. A recombinant L. lactis NZ3900 was obtained and applied for the detoxification of acetaldehyde as whole-cell biocatalysts. The activity of IstALDH in L. lactis NZ3900 (pNZ8148-istALDH) reached 36.4 U mL^?1 when the recombinant cells were induced with 50 ng mL^?1 nisin at 20 °C for 2 h. The IstALDH activity of recombinant L. lactis cells showed higher stability at 37 °C and pH 4.0 compared with the crude enzyme. L. lactis NZ3900 (pNZ8148-istALDH) could convert acetaldehyde at pH 2.0 while the crude enzyme could not. Moreover, the resting cells of L. lactis NZ3900 (pNZ8148-istALDH) showed a 2.5-fold higher activity and better stability in catalyzing oxidation of acetaldehyde at pH 2.0 compared with that of Escherichia coli expressing the IstALDH. Taken together, the L. lactis cells expressing recombinant IstALDH are potential whole-cell biocatalysts that can be applied in the detoxification of aldehydes.     

Single Cell Oil Production from Hydrolysates of Inulin by a Newly Isolated Yeast <Emphasis Type="Italic">Papiliotrema laurentii</Emphasis> AM113 for Biodiesel Making

Microbial oils are among the most attractive alternative feedstocks for biodiesel production. In this study, a newly isolated yeast strain, AM113 of Papiliotrema laurentii, was identified as a potential lipid producer, which could accumulate a large amount of intracellular lipids from hydrolysates of inulin. P. laurentii AM113 was able to produce 54.6% (w/w) of intracellular oil in its cells and 18.2 g/l of dry cell mass in a fed-batch fermentation. The yields of lipid and biomass were 0.14 and 0.25 g per gram of consumed sugar, respectively. The lipid productivity was 0.092 g of oil per hour. Compositions of the fatty acids produced were C_14:0 (0.9%), C_16:0 (10.8%), C_16:1 (9.7%), C_18:0 (6.5%), C_18:1 (60.3%), and C_18:2 (11.8%). Biodiesel obtained from the extracted lipids could be burnt well. This study not only provides a promising candidate for single cell oil production, but will also probably facilitate more efficient biodiesel production.     

Highly efficient mesoporous WO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/KIT-6 catalysts for oxidative desulfurization of dibenzothiophene with hydrogen peroxide

Oxidative desulfurization (ODS) of organic compounds containing sulfur element from a model oil was performed using tungsten oxide catalysts supported on mesoporous silica with cubic Ia3d mesostructure, well-defined mesopores (7.2 nm), high surface area (719 m²/g), and three-dimensional pore network (WO _x /KIT-6). The prepared WO _x /KIT-6 catalysts (5–20 wt% WO _x ) were characterized by X-ray diffraction analysis, N₂ sorption measurements, electron microscopy, H₂-temperature programmed reduction, Raman spectroscopy, and thermogravimetric analysis. Among the mesoporous catalysts, 10 wt% WO _x /KIT-6 exhibited the best catalytic performance. Sulfur-containing organic compounds, such as dibenzothiophene, 4,6-dimethyldibenzothiophene, and benzothiophene, were completely (100 %) removed from the model oil over 10 wt% WO _x /KIT-6 catalyst in 2 h. In addition, the catalyst could be reused several times with only slight decrease in catalytic activity.     

Effect of <Emphasis Type="Italic">Rol</Emphasis> Genes on Polyphenols Biosynthesis in <Emphasis Type="Italic">Artemisia annua</Emphasis> and Their Effect on Antioxidant and Cytotoxic Potential of the Plant

Flavonoids are famous for their antioxidant capacity and redox potential. They can combat with cell aging, lipid peroxidation, and cancer. In the present study, Artemisia annua hybrid (Hyb8001r) was subjected to qualitative and quantitative analysis of flavonoids through HPLC. Rol genes transgenics of A. annua were also evaluated for an increase in their flavonoid content along with an increase in antioxidant and cytotoxic potential. This was also correlated with the expression level of flavonoids biosynthetic pathway genes as determined by real-time qPCR. Phenylalanine ammonia-lyase and chalcone synthase genes were found to be significantly more highly expressed in rol B (four to sixfold) and rol C transgenics (3.8–5.5-fold) than the wild-type plant. Flavonoids detected in the wild-type A. annua through HPLC include rutin (0.31 mg/g DW), quercetin (0.01 mg/g DW), isoquercetin (0.107 mg/g DW) and caffeic acid (0.03 mg/g DW). Transgenics of the rol B gene showed up to threefold increase in rutin and caffeic acid, sixfold increase in isoquercetin, and fourfold increase in quercetin. Whereas, in the case of transgenics of rol C gene, threefold increase in rutin and quercetin, 5 fold increase in isoquercetin, and 2.6-fold increase in caffeic acid was followed. Total phenolics and flavonoids content was also found to be increased in rol B (1.5-fold) and rol C (1.4-fold) transgenics as compared to the wild-type plant along with increased free radical scavenging activity. Similarly, the cytotoxic potential of rol gene transgenics against MCF7, HeLA, and HePG2 cancer cell lines was found to be significantly enhanced than the wild-type plant of A. annua. Current findings support the fact that rol genes can alter the secondary metabolism and phytochemical level of the plant. They increased the flavonoids content of A. annua by altering the expression level of flavonoids biosynthetic pathway genes. Increased flavonoid content also enhanced the antioxidant and cytotoxic potential of the plant.     

Purification and Characterisation of a Thermostable β-Xylosidase from <Emphasis Type="Italic">Aspergillus niger</Emphasis> van Tieghem of Potential Application in Lignocellulosic Bioethanol Production

A locally isolated strain of Aspergillus niger van Tieghem was found to produce thermostable β-xylosidase activity. The enzyme was purified by cation and anion exchange and hydrophobic interaction chromatography. Maximum activity was observed at 70–75 °C and pH 4.5. The enzyme was found to be thermostable retaining 91 and 87% of its original activity after incubation for 72 h at 60 and 65 °C, respectively, with 52% residual activity detected after 18 h at 70 °C. Available data indicates that the purified β-xylosidase is more thermostable over industrially relevant prolonged periods at high temperature than those reported from other A. niger strains. Maximum activity was observed on p-nitrophenyl-β-d-xylopyranoside and the enzyme also hydrolysed p-nitrophenyl β-d-glucopyranoside and p-nitrophenyl α-l-arabinofuranoside. The purified enzyme acted synergistically with A. niger endo-1,4-β-xylanase in the hydrolysis of beechwood xylan at 65 °C. During hydrolysis of pretreated straw lignocellulose at 70 °C using a commercial lignocellulosic enzyme cocktail, inclusion of the purified enzyme resulted in a 19-fold increase in the amount of xylose produced after 6 h. The results observed indicate potential suitability for industrial application in the production of lignocellulosic bioethanol where thermostable β-xylosidase activity is of growing interest to maximise the enzymatic hydrolysis of lignocellulose.     

Resolution Mechanism and Characterization of an Ammonium Chloride-Tolerant,High-Thermostable,and Salt-Tolerant Phenylalanine Dehydrogenase from <Emphasis Type="Italic">Bacillus halodurans</Emphasis>

As phenylalanine dehydrogenase (PheDH) plays an important role in the synthesis of chiral drug intermediates and detection of phenylketonuria, it is significant to obtain a PheDH with specific and high activity. Here, a PheDH gene, pdh, encoding a novel BhPheDH with 61.0% similarity to the known PheDH from Microbacterium sp., was obtained. The BhPheDH showed optimal activity at 60 °C and pH 7.0, and it showed better stability in hot environment (40–70 °C) than the PheDH from Nocardia sp. And its activity and thermostability could be significantly increased by sodium salt. After incubation for 2 h in 3 M NaCl at 60 °C, the residual activity of the BhPheDH was found to be 1.8-fold higher than that of the control group (without NaCl). The BhPheDH could tolerate high concentration of ammonium chloride and its activity could be also enhanced by the high concentration of ammonium salts. These characteristics indicate that the BhPheDH possesses better thermostability, ammonium chloride tolerance, halophilic mechanism, and high salt activation. The mechanism of thermostability and high salt tolerance of the BhPheDH was analyzed by molecular dynamics simulation. These results provide useful information about the enzyme with high-temperature activity, thermostability, halophilic mechanism, tolerance to high concentration of ammonium chloride, higher salt activation and enantio-selectivity, and the application of molecular dynamics simulation in analyzing the mechanism of these distinctive characteristics.     

Heterologous Expression and Characterization of an Acidic GH11 Family Xylanase from <Emphasis Type="Italic">Hypocrea orientalis</Emphasis>

A gene encoding glycoside hydrolase family 11 xylanase (HoXyn11B) from Hypocrea orientalis EU7–22 was expressed in Pichia pastoris with a high activity (413 IU/ml). HoXyn11B was partly N-glycosylated and appeared two protein bands (19–29 kDa) on SDS-PAGE. The recombinant enzyme exhibited optimal activity at pH 4.5 and 55 °C, and retained more than 90% of the original activity after incubation at 50 °C for 60 min. The determined apparent K _m and V _max values using beechwood xylan were 10.43 mg/ml and 3246.75 IU/mg, respectively. The modes of action of recombinant HoXyn11B on xylo-oligosaccharides (XOSs) and beechwood xylan were investigated by thin-layer chromatography (TLC), high-performance liquid chromatography (HPLC), and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS), which indicated that the modes of action of HoXyn11B are different from HoXyn11A since it is able to release a significant amount of xylose from various substrates. This study provides an opportunity to better understand the hydrolysis mechanisms of xylan by xylanases from Trichoderma.     

Study of variation in thermophysical properties of RE<Subscript>6</Subscript>UO<Subscript>12</Subscript>(s) along the lanthanide series

The novel ligand N,N,N′′′′,N′′′′-tetrabutyl-N′′′,N′′′-(N″,N″-diethyl)-ethidene bisdiglycolamide (TBEE-BisDGA) and other eight analogous extractants have been synthesized and characterized by NMR and HRMS. The solvent extraction of Th⁴⁺, UO₂ ²⁺ and Eu³⁺ from nitric acid solution using the above BisDGA extractants was investigated in 1-dodecanol at 30 ± 1 °C. The extractants exhibited higher affinity toward Th⁴⁺ than UO₂ ²⁺ and Eu³⁺ in the present system. The maximum value of separation factor SF _Th(IV)/U(VI) and SF _{Th(IV)/Eu(III)} is 78.5 and 53.3 respectively for TBEE-BisDGA, 88.1 and 69.5 respectively in the case of TB ^i-PE-BisDGA at 3 M HNO₃ solution.     

The Purification and Characterization of Lipases from <Emphasis Type="Italic">Lasiodiplodia theobromae</Emphasis>, and Their Immobilization and Use for Biodiesel Production from Coconut Oil

The coconut kernel-associated fungus, Lasiodiplodia theobromae VBE1, was grown on coconut cake with added coconut oil as lipase inducer under solid-state fermentation conditions. The extracellular-produced lipases were purified and resulted in two enzymes: lipase A (68,000 Da)—purified 25.41-fold, recovery of 47.1%—and lipase B (32,000 Da)—purified 18.47-fold, recovery of 8.2%. Both lipases showed optimal activity at pH 8.0 and 35 °C, were activated by Ca²⁺, exhibited highest specificity towards coconut oil and p-nitrophenyl palmitate, and were stable in iso-octane and hexane. Ethanol supported higher lipase activity than methanol, and n-butanol inactivated both lipases. Crude lipase immobilized by entrapment within 4% (w/v) calcium alginate beads was more stable than the crude-free lipase preparation within the range pH 2.5–10.0 and 20–80 °C. The immobilized lipase preparation was used to catalyze the transesterification/methanolysis of coconut oil to biodiesel (fatty acyl methyl esters (FAMEs)) and was quantified by gas chromatography. The principal FAMEs were laurate (46.1%), myristate (22.3%), palmitate (9.9%), and oleate (7.2%), with minor amounts of caprylate, caprate, and stearate also present. The FAME profile was comparatively similar to NaOH-mediated transesterified biodiesel from coconut oil, but distinctly different to petroleum-derived diesel. This study concluded that Lasiodiplodia theobromae VBE1 lipases have potential for biodiesel production from coconut oil.     

Comparison of the effect of <Emphasis Type="Italic">Pleurotus citrinopileatus</Emphasis> extract and vitamin E on the stabilization properties of camellia oil

We selected Camellia tenuifolia (Hayata) seed oil to compare the effects of mushroom extract and vitamin E on its stabilization properties. Camellia tenuifolia was selected for its higher oil content, but its proportions of unsaturated fatty acids and natural antioxidants as well as its oxidation stability are lower than those of Camellia oleifera oil. Our aim was to improve the oxidation stability, thermal stability, and photodegradation of C. tenuifolia seed oil and then compare the advantages of mixing traditional antioxidant (vitamin E) and mushroom natural antioxidant components (mushroom extract) in the oil. The focus was on the analysis of the effects of Pleurotus citrinopileatus (Singer) extract and vitamin E on the stabilization properties of C. tenuifolia seed oil, which involved some degradation research, such as evaluating the thermal, oxidation, and antioxidant effects as well as the irradiative (pulsed light) stability of the original oil and oil mixed with additives for comparing the differences by differential scanning calorimetry tests and isothermal microcalorimeter (TAM Air) analyses. We determined the effects of stabilization additives vitamin E and various PC extract doses by using pulsed light irradiation (0, 30, and 60 pulses) and found that the 3 mass% PC extract had the best antiphotodegradation characteristics, and the 0.1 mass% vitamin E indicated the outstanding oxidation stability for among all of the additives in this study. Overall, we obtained the following suitable conditions to stabilize camellia oil: addition of vitamin E, addition of 3 mass% PC extract, and a nitrogen atmosphere.     

Quantitative Analysis of Phenolic Acids in Extracts Obtained from the Fruits of Peucedanum alsaticum L. and Peucedanum cervaria (L.) Lap

Peucedanum alsaticum L. and Peucedanum cervaria (L.) Lap. are, in common with all species belonging to the Apiaceae family, rich in coumarins and essential oils. Phenolic acids also present in the plant are very important pharmacologically, because of their broad spectrum of biological activity. A simple high-performance liquid chromatographic method has been developed for separation and quantitative analysis of the major phenolic acids in extracts obtained from the fruits of P. alsaticum and P. cervaria. Soxhlet extraction, ultrasound extraction, and accelerated solvent extraction under different conditions were used to find the most efficient extraction conditions. Optimum chromatographic performance was obtained with a C₁₈ column and acetonitrile—1% (v/v) aqueous acetic acid as mobile phase. Ferulic, p-coumaric, caffeic, vanillic, syringic, p-hydroxybenzoic, protocatechuic, chlorogenic, and gallic acids were investigated in the fruits of the plants. For all calibration plots linearity was good (R ² > 0.9991) in the ranges tested. The highest yields of most of the phenolic acids were achieved by use of accelerated solvent extraction. The predominant phenolic acid in the fruits of both plants was chlorogenic acid. The amounts, which depended on the method of extraction, were approximately 146 ± 1.616 and 109.92 ± 3.405 mg per 100 g dry weight for P. cervaria and P. alsaticum, respectively.     

Saw-sedge <Emphasis Type="Italic">Cladium mariscus</Emphasis> as a functional low-cost adsorbent for effective removal of 2,4-dichlorophenoxyacetic acid from aqueous systems

For the first time in the published literature, a study is described concerning the use of the saw-sedge Cladium mariscus (C. mariscus) for adsorption of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous systems. Among the experiments carried out, the elemental composition of C. mariscus was determined (C = 48.0 %, H = 7.1 %, N = 0.95 %, S = 0.4 %), FTIR spectroscopic analysis was performed to confirm the chemical structure of the adsorbent, and porous structure parameters were measured: BET surface area (A _BET  = 0.6 m²/g), total pore volume (V _p  = 0.001 cm³/g) and average pore size (S _p  = 6.6 nm). It was shown that the effectiveness of removal of 2,4-D from aqueous systems using C. mariscus depends on parameters of the process: contact time, system pH, mass of sorbent, and temperature. Maximum adsorption was attained for a solution at pH = 3. Further increase in the alkalinity of the tested systems led to a reduction in the effectiveness of the process. The kinetic of adsorption of 2,4-D by C. mariscus was also determined, and thermodynamic aspects were investigated. The experimental data obtained correspond to a pseudo-second-order kinetic model of type 1. Additionally the negative values obtained for ΔHº indicate that the process is exothermic, and the negative values of ΔGº show it to be spontaneous. As the temperature of the system increases the spontaneity of adsorption is reduced, in accordance with the exothermic nature of the process.     

Efficient <Emphasis Type="Italic">Candida rugosa</Emphasis> lipase immobilization on Maghnite clay and application for the production of (<Emphasis Type="Italic">1R</Emphasis>)-(−)-Menthyl acetate

This work focused on the identification of natural, economical, and efficient supports for immobilization of Candida rugosa lipase (CRL) to catalyze the resolution of (±)-menthol. To this purpose, CRL has been immobilized on natural montmorillonite from Algeria (Maghnite-H), ion-exchange resins (Amberjet^®1200-H and Amberjet^®4200-Cl), and diatomaceous earth (Celite^®545). After a preliminary screening of supports, the immobilization of CRL led to a markedly improved enantioselectivity. Excellent enantioselectivity (E ≥ 134) was achieved by the four supported lipases (E = 68 for free enzyme). Compared to the three other supports tested, higher enantioselectivity was observed with Maghnite-H used as immobilization matrix. In this work, the effects of solvent, reaction time, and temperature, on the conversion as well as on enantioselectivity were investigated. The maximum of conversion (% C = 43%) with high enantiomeric excess of products (eep > 99) was obtained when the reaction is catalyzed by CRL immobilized on Maghnite-H at 30 °C for 24 h, and using toluene as selected solvent. Immobilized CRL on Maghnite-H exhibited good thermostability over a wide temperature range (30–90 °C) compared to the free one. These results suggest that CRL immobilized on Maghnite-H has good potential as biocatalyst for the production of (1R)-(?)-menthyl acetate.     

Engineering <Emphasis Type="Italic">Pichia pastoris</Emphasis> for Efficient Production of a Novel Bifunctional <Emphasis Type="Italic">Strongylocentrotus purpuratus</Emphasis> Invertebrate-Type Lysozyme

Lysozymes are known as ubiquitously distributed immune effectors with hydrolytic activity against peptidoglycan, the major bacterial cell wall polymer, to trigger cell lysis. In the present study, the full-length cDNA sequence of a novel sea urchin Strongylocentrotus purpuratus invertebrate-type lysozyme (sp-iLys) was synthesized according to the codon usage bias of Pichia pastoris and was cloned into a constitutive expression plasmid pPIC9K. The resulting plasmid, pPIC9K-sp-iLys, was integrated into the genome of P. pastoris strain GS115. The bioactive recombinant sp-iLys was successfully secreted into the culture broth by positive transformants. The highest lytic activity of 960 U/mL of culture supernatant was reached in fed-batch fermentation. Using chitin affinity chromatography and gel-filtration chromatography, recombinant sp-iLys was produced with a yield of 94.5 mg/L and purity of >?99%. Recombinant sp-iLys reached its peak lytic activity of 8560 U/mg at pH 6.0 and 30 °C and showed antimicrobial activities against Gram-negative bacteria (Vibrio vulnificus, Vibrio parahemolyticus, and Aeromonas hydrophila) and Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis). In addition, recombinant sp-iLys displayed isopeptidase activity which reached the peak at pH 7.5 and 37 °C with the presence of 0.05 M Na⁺. In conclusion, this report describes the heterologous expression of recombinant sp-iLys in P. pastoris on a preparative-scale, which possesses lytic activity and isopeptidase activity. This suggests that sp-iLys might play an important role in the innate immunity of S. purpuratus.