Polymers containing phenylquinoxaline rings

The synthesis and properties of poly(phenylquinoxalines) containing hexafluoroisopropylidene or silylene units in the backbone are described. The polymers have been prepared by polycondensation of aromatic diamines containing preformed phenylquinoxaline rings with a dianhydride or diacid chlorides containing hexafluoroisopropylidene groups, or with a dianhydride or diacid chlorides containing silylene units. The solubility, thermal stability, film forming ability, and electric insulating, mechanical, and electroluminescent properties of the thin films are discussed and compared with those of related heterocyclic polymers. Potential applications of poly(phenylquinoxalines) are outlined.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1739–1748, September, 2004.     

Synthesis and structures of substituted 5,6-dihydro-spiro(benz[4,5]imidazo[1,2-<Emphasis Type="Italic">c</Emphasis>]quinazoline-6,3′-indolin)-2′-ones

The reactions of 2-(2-aminophenyl)benzimidazole with substituted isatins afforded the corresponding 5,6-dihydrospiro(benz[4,5]imidazo[1,2-c]quinazoline-6,3indolin)-2-ones. The spirocyclic structure of the reaction products was established by NMR spectroscopy and X ray diffraction analysis.Results of the study were presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (May 30–June 4, 2004, Moscow).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1987–1989, September, 2004.     

Boron and gadolinium neutron capture therapy

The principles of neutron capture therapy of tumor diseases, the types of drugs, and the results of their clinical applications are discussed.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1795–1812, September, 2004.     

Polymorphism of (+)N-tosyl-L-glutamic acid

It has been shown that polymorphism is the reason for the occurrence of (+)N-tosyl-L-glutamic acid 1 with various melting points. 1 occurs in two crystalline forms: and . Form -1 (prisms) having a melting point of 145–147°C is chemically pure and stable. Form -1, however, is unstable and is formed as a result of the stabilizing effect of an organic solvent not introduced into the structure of the crystal. At about 125°C the forms is transformed to the form. The melting point of the form depends on the amount and type of solvent contained in the crystal, which, during measurement cannot leave the system.     

Synthesis and characterization of aromatic poly(ether sulfone imide)s derived from sulfonyl bis(ether anhydride)s and aromatic diamines

Two sulfonyl group-containing bis(ether anhydride)s, 4,4′-[sulfonylbis(1,4-phenylene)dioxy]diphthalic anhydride ( IV ) and 4,4′-[sulfonylbis(2,6-dimethyl-1,4-phenylene)dioxy]diphthalic anhydride (Me- IV ), were prepared in three steps starting from the nucleophilic nitrodisplacement reaction of the bisphenolate ions of 4,4′-sulfonyldiphenol and 4,4′-sulfonylbis(2,6-dimethylphenol) with 4-nitrophthalonitrile in N,N-dimethylformamide (DMF). High-molar-mass aromatic poly(ether sulfone imide)s were synthesized via a conventional two-stage procedure from the bis(ether anhydride)s and various aromatic diamines. The inherent viscosities of the intermediate poly(ether sulfone amic acid)s were in the ranges of 0.30–0.47 dL/g for those from IV and 0.64–1.34 dL/g for those from Me- IV. After thermal imidization, the resulting two series of poly(ether sulfone imide)s had inherent viscosities of 0.25–0.49 and 0.39–1.19 dL/g, respectively. Most of the polyimides showed distinct glass transitions on their differential scanning calorimetry (DSC) curves, and their glass transition temperatures (T_g) were recorded between 223–253 and 252–288°C, respectively. The results of thermogravimetry (TG) revealed that all the poly(ether sulfone imide)s showed no significant weight loss before 400°C. The methyl-substituted polymers showed higher T_g's but lower initial decomposition temperatures and less solubility compared to the corresponding unsubstituted polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1649–1656, 1998     

Low-temperature X-ray study of benzoid-quinoid tautomerism in crystals of 2-(N,N-diphenylhydrazinoethylidene)-3(2H)-benzo[b]thiophenone

An X-ray investigation of 2-(N,N-diphenylhydrazinoethylidene)-3(2H)-benzo[b]thiophenone was performed at room and low (–80 °C) temperatures. It was established that the structure of this compound in the crystalline state at R-20 °C is intermediate between the ketoenehydrazine and hydroxyhydrazone forms, while at –80 °C the molecular structure is completely transformed to the hydroxyhydrazone form. This confirms the dynamic nature of hydrogen atom disordering in the molecule at 20 °C.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 104–106, January, 1995.This work was financially supported by the Russian Foundation for Basic Research (Project No. 93-03-04355).     

Effects of the structure on the properties of new poly(arylene ether sulfone)s containing naphthalene units

A series of new poly(arylene ether sulfone)s has been obtained by solution condensation polymerisation starting from 1,5- and 2,6-bis-(4-fluorosulfonyl)naphthalene with various aromatic dihydroxy compounds. The polymers, obtained in quantitative yields, possessed inherent viscosities in the range 0.28-0.68 dl g⁻¹, had good thermal stability (10% weight loss temperatures were above 405 and 420 °C respectively in nitrogen and air) and high glass transition temperatures (in the range 217-258 °C). They have been characterised by elemental and infrared analyses, GPC and wide-angle X-ray diffraction. The properties of these poly(arylene ether sulfone)s have been compared with those of the corresponding poly(arylene ether ketone)s.     

Synthesis and Properties of Novel Poly（amine ether）s

Using aromatic bis（4-bromophenyl） ether and various aromatic diamines as the monomers, a series of novel poly（amine ether）s （PAEs） have been synthesized via palladium-catalyzed aryl amination, which is the Hartwig-Buchwald polycondensation reaction. Their structures were characterized by means of elemental analysis, FT-IR, 1^H NMR and UV-Vis spectroscopy. The results show a good agreement with the proposed structures. Their general properties were studied by DSC and TG and it＇s obvious that they show high glass transition temperatures （Tg〉200 ℃）, good thermal stability with high decomposition temperatures （TD〉500℃） and excellent solubility. The mechanical behavior of these polymers suggested that they could be considered a new class of high-performance polymers.     

Flavonol glycosides of the flowers of a thin-leaved cotton plant of the species Gossypium barbadense

Summary The flowers of the thin-leaved cotton plant of variety 5904-I(Gossypium barbadense) contained more than 5% of combined flavonols consisting of quercimeritrin, hisutrin, quercetin 3-glucoside, and a flavonol with mp 228–229°C. The latter has the structure of gossypetin 7--D-glucopyranoside.Scientific-Research Institute for the Chemistry and Technology of Cotton Cellulose, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 142–146, March, 1971.     

A constitutional diagram of the system VC0.88−HfC0.98−(MoC)

The system VC_0.88–HfC_0.98–MoC was investigated by means of melting point, differential-thermoanalytical, X-ray diffraction and metallographic techniques on hot pressed and heat treated as well as melted alloy specimens and a constitutional diagram from 1500°C through the melting range established.The small miscibility gap within the HfC–MoC system (T _c=1630°C) interacts at lower temperatures with the solvus in a monotectoid-like reaction at 1575°C. Additions of VC to the HfC–MoC solid solution gradually increase its critical temperature.Solid state phase behaviour and melting behaviour was established within the isopleths VC_0.88–MoC as well as within (V_0.5Hf_0.5)C–MoC and (V_0.75Hf_0.25)C–(Hf_0.75Mo_0.25)C.Phase equilibria within VC_0.88–HfC–MoC are characterized by an extreme large miscibility gap at 1500°C connecting the VC–HfC and HfC–MoC systems.Originating at the VC–HfC binary an eutectic trough proceeds into the VC–HfC–MoC ternary with rising temperatures, connecting the maximum critical point of the disappearing miscibility gap [(V_0.31Hf_0.49Mo_0.20)C] by a limiting tie line (2750±20°C). Isothermal sections have been calculated assuming regular solutions.With 5 Figures     

Mechanical properties of poly(vinyl methyl ether) hydrogels below and above their volume phase transition

The mechanical properties of radiation cross-linked poly(vinyl methyl ether) hydrogels below and above the volume phase transition (VPT) under isobar conditions were studied. The viscoelastic properties as a function of radiation dose, radiation source and polymer concentration at the state of irradiation were examined. Increased radiation doses led to higher cross-linking densities and higher moduli. Hydrogels irradiated with -rays were much harder than those obtained with electron beam irradiation at the same radiation dose. It was found that the modulus strongly increased by up to 1 order of magnitude at a temperature of the VPT of about 37 °C. In the collapsed state at temperatures well above the VPT a frequency dependence of the E() moduli in the range 0.1–22 Hz was detected, indicating viscoelastic behavior. To study the influence of solvent quality on the modulus of the hydrogels, rheological measurements were performed in water, 2-propanol and cyclohexane. A scaling exponent for the modulus according to de Gennes (G^2.25) was not found. Possible reasons for deviations (G^3.54) on poly(vinyl methyl ether) hydrogels were discussed in the context of deviations from ideal networks.     

Asymmetric Baeyer—Villiger oxidation: control of stereoelectronic demand

The recent development of asymmetric Baeyer—Villiger oxidation of prochiral and racemic ketones is briefly summarized, focusing on the regio- and stereocontrol of the oxidation attained by regulating the stereoelectronic demand in the step of rearrangement of the Criegee intermediate.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1784–1794, September, 2004.     

Thermal dehydration and decomposition of FeCl3·xH2O

Thermal dehydration and decomposition characteristics of Fe(III) chloride hydrate have been studied by both isothermal and non-isothermal methods. After the initial melting at 35–40°C both dehydration and decomposition of the salt proceed simultaneously at temperature above 100°C. At 250–300°C a stable hydrated Fe(OH)₂Cl is formed representing the first plateau region in the TG curve. Around 400°C, a second plateau is observed corresponding to the formation of mostly Fe₂O₃ which however retains some OH groups and Cl^– ions. However, these temperature ranges vary with the TA equipments used. Chemical analysis of the products of decomposition at temperatures above 140°C also gives evidence for the formation of FeOCl which on hydrolysis in water gives FeCl₃ in solution. The FT-IR spectra suggest the presence of structural OH groups even for samples calcined at 300–400°C. The XRD patterns of the products of decomposition in the temperature range 160–400°C indicate the presence of -FeOOH, some unidentified basic chlorides and -Fe₂O₃.The authors wish to thank the Director, R. R. L. Bhubaneswar for his kind permission to publish this paper. One of the authors (SKM) is grateful to the Council of Scientific and Industrial Research (CSIR), New Delhi for the award of a fellowship.     

Crystal structure of Ba(VUO<Subscript>6</Subscript>)<Subscript>2</Subscript>

The crystal structure of Ba(VUO₆)₂ was determined by X-ray diffraction at 243 K: monoclinic crystal system, space group P2₁/c, unit cell parameters a=6.4992(6) Å, b=8.3803(8) Å, c=10.4235(9) Å, =104.749(2) °, Z=2. The structure contains close-packed [VUO₆] ₂ ^- layers formed by the dimers of the flattened U₂O₁₂ pentagonal bipyramids and by the dimers of V₂O₈ square pyramids. The neighboring layers are bound by the statistically distributed barium atoms.Original Russian Text Copyright © 2004 by E. V. Alekseev, E. V. Suleimanov, E. V. Chuprunov, and G. K. FukinTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 544–548, May–June 2004.     

Synthesis and characterization of aromatic poly(ether ketone)s containing cyclotriphosphazene units

Bis(4-oxybenzoic acid) tetrakis(phenoxy) cyclotriphosphazene (IUPAC name: 4-[4-(carboxyphenoxy)-2,4,6,6-tetraphenoxy-1,3,5,2λ⁵,4λ⁵,6λ⁵-triazatriphosphinin-2-yl]oxy-benzoic acid) was synthesized and direct polycondensed with diphenylether or 1,4-diphenoxybenzene in Eaton's reagent at the temperature range of 80–120°C for 3 hours to give aromatic poly(ether ketone)s. Polycondensations at 120°C gave polymer of high molecular weight. Incorporation of cyclotriphosphazene groups in the aromatic poly(ether ketone) backbone greatly enhanced the solubility of these polymers in common organic polar solvents. Thermal stabilities by TGA for two polymer samples of polymer series ranged from 390 to 354°C in nitrogen at 10% weight loss and glass transition temperatures (T_g) ranged from 81.4 to 89.6°C by DSC. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1227–1232, 1998     

Synthesis and characterization of new poly(arylene ether)s containing heterocyclic units. II.

A series of new poly(arylene ether)s, containing naphthalene, pyridine, and quinoline units have been prepared by solution condensation polymerization. The synthesis involves nucleophilic displacement of aromatic dihalides with aromatic potassium bisphenates in an anhydrous dipolar aprotic solvent at elevated temperatures. The polymers, having inherent viscosity from 0.24 to 1.32 dL/g, were obtained in quantitative yield, have excellent thermal stability as shown by 10% weight loss temperatures in nitrogen and air (above 450 and 430°C, respectively) and high glass transition temperatures (in the range of 150–220°C). The introduction of quinoline moieties in the polymer backbone positively influences the thermal properties, such as high T_g/T_m ratios. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of aromatic poly (ether sulfone)s and poly (ether ketone)s based on methyl-substituted biphenyl-4,4′-diols

Novel methyl-substituted aromatic poly (ether sulfone)s and poly (ether ketone)s were synthesized from combinations of 3,3′,5,5′-tetramethylbipheny-4,4′-diol and 2,2′,3,3′,5,5′-hexamethylbiphenyl-4,4′-diol, and 4,4′-dichlorodiphenyl sulfone and 4,4′-difluorobenzo-phenone by nucleophilic aromatic substitution polycondensation. The polycondensations proceeded quantitatively in a N-methyl-2-pyrrolidone-toluene solvent system in the presence of anhydrous potassium carbonate to afford the polymers with inherent viscosities between 0.86 and 1.55 dL/g. The methyl-substituted poly (ether sulfone)s and poly (ether ketone)s showed good solubility in common organic solvents such as chloroform, tetrahydrofuran, pyridine, m-cresol, and N,N-dimethylacetamide. The tetramethyl- and hexamethyl-substituted aromatic polyethers had higher glass transition temperatures than the corresponding unsubstituted polymers, and did not decompose below 350°C in both air and nitrogen atmospheres. The films of the methyl-substituted poly (ether ketone)s became insoluble in chloroform by the irradiation of ultraviolet light, indicating the occurrence of photochemical crosslinking reactions. © 1994 John Wiley & Sons, Inc.     

Poly(aryl ether amide)s

A general method for the preparation of poly(aryl ether amide)s has been developed where the generation of an aryl ether linkage is the polymer-forming reaction. The amide linkage was found to be sufficiently electron-withdrawing to activate halo-substituents towards nucleophilic aromatic substitution analogous to conventional activating groups (i.e., sulfone, ketone, etc.). Model reactions demonstrated that the amide-activated displacement occurred with high selectivity in near quantitative yield and was judged suitable as a polymer-forming reaction. Appropriately fluoro-substituted amides were prepared and subjected to displacement polymerization with bisphenoxides in a N-methyl-2-pyrrolidone (NMP)/N-cyclohexyl-2-pyrrolidone (CHP) solvent mixture. High molecular weight polymers with glass transition temperatures in the 200–225°C range were obtained. © 1993 John Wiley & Sons, Inc.     

Effect of the crystalline environment upon the rotational conformation about the N-C and C-C′ bonds (Φ andΨ) in amides and peptides

SCFab initio and PCILO computations indicate the intrinsic preference of the torsion angle for 60 °. In the crystal structure of simple methylamides and peptides the observed values for this torsion angle lie between 0 °–30 °. Different procedures for computing lattice energies and total crystallographic conformational energies (lattice + torsional) utilized by other authors, failed to account for this situation. We show that the procedure developed recently in our laboratory for computing lattice energies indicates that the minima of these energies for in acetamide and N-methylacetamide correspond well to 0 °–30 °. Because of the low value of the barrier of the torsional potential for this angle, the total crystallographic conformational energy corresponds also to = 0 °–30 ° in agreement with the experimental data.     

Highly phenylated poly(aryl ether phthalazine)s

Two series of novel amorphous poly(aryl ether phthalazine)s have been prepared via an intramolecular ring closure reaction of poly(aryl ether ketone)s (PAEKs) with hydrazine monohydrate. Fluorinated PAEKs, which display solubility in solvents incorporating a ketone functionality such as acetone or ethyl acetate, were converted to poly(aryl ether phthalazine)s to observe if these polymers would display similar solubility characteristics. The poly(aryl ether phthalazine)s have glass transition temperatures in the range of 278–320°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. The fluorinated poly(aryl ether phthalazine)s were not soluble in ketonic solvents. A series of poly(aryl ether phthalazine)s incorporating pendant 2-naphthalenyl moieties has been prepared in an attempt to produce amorphous, thermally stable polymers with high glass transition temperatures. The polymers have glass transition temperatures in the range of 287–334°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. Poly(aryl ether phthalazine)s undergo an exothermic reaction above the glass transition temperature. The major product of this reaction is a rearrangement of the phthalazine moieties to quiazoline moieties, however some crosslinking of the polymers occurs. Cured samples of the poly(aryl ether phthalazine)s show a small increase in the polymer T_g and are insoluble in all solvents tested. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1897–1905, 1996