Metallic and non-metallic redox response of conducting polymers

The potentiometric response of electrodes coated with polypyrrole or poly(N-methylpyrrole) films with different doping anions was studied in solutions containing the redox couples: Fe(CN)₆^3−/4−, Ru(NH₃)₆^3+/2+ and Fe(Ill)/Fe(II). The stable potential measured with the electrodes was the potential of the redox couple. The response time was instant for polypyrrole doped with dodecylsulphate ions, PPy(DS) and slow for the polymers doped with mobile anions. On the basis of electrochemical measurements and chemical analysis by EDAX spectroscopy it was found that with the PPy(DS) electrode the potentiometric response was of the ‘metallic’ type, with no change in the oxidation state of the bulk polymer. With the other polymer systems studied reduction or oxidation of the polymer bulk took place when it was in contact with a redox couple in the solution.     

Novel lipoate-selective membrane sensor for the flow injection determination of alpha-lipoic acid in pharmaceutical preparations and urine

A potentiometric lipoate-selective sensor based on mercuric lipoate ion-pair as a membrane carrier is reported. The electrode was prepared by coating the membrane solution containing PVC, plasticizer, and carrier on the surface of graphite electrode. Influences of the membrane composition, pH, and possible interfering anions were investigated on the response properties of the electrode. The sensor exhibits significantly enhanced response toward lipoate ions over the concentration range 1 × 10⁻⁷ mol L⁻¹ to 1 × 10⁻² mol L⁻¹ with a lower detection limit of (LDL) of 9 × 10⁻⁸ mol L⁻¹ and a slope of −29.4 mV decade⁻¹, with S.D. of the slope is 0.214 mV. Fast and stable response, good reproducibility, long-term stability, applicability over a pH range of 8.0–9.5 is demonstrated. The sensor has a response time of ≤12 s and can be used for at least 6 weeks without any considerable divergence in its potential response. The proposed electrode shows good discrimination of lipoate from several inorganic and organic anions. The CGE was used in flow injection potentiometry (FIP) and resulted in well defined peaks for lipoate ions with stable baseline, excellent reproducibility and reasonable sampling rate of 30 injections per hour. The proposed sensor has been applied for the direct and FI potentiometric determination of LA in pharmaceutical preparations and urine; and has been also utilized as an indicator electrode for the potentiometric titration of LA.     

Anion recognition using newly synthesized hydrogen bonding disubstituted phenylhydrazone-based receptors: poly(vinyl chloride)-based sensor for acetate

A potentiometric acetate-selective sensor, based on the use of butane-2,3-dione,bis[(2,4-dinitrophenyl)hydrazone] (BDH) as a neutral carrier in poly(vinyl chloride) (PVC) matrix, is reported. Effect of various plasticizers and cation excluder, cetryaltrimethylammonium bromide (CTAB) was studied. The best performance was obtained with a membrane composition of PVC:BDH:CTAB ratio (w/w; mg) of 160:8:8. The sensor exhibits significantly enhanced selectivity toward acetate ions over a wide concentration range 5.0 × 10⁻⁶ to 1.0 × 10⁻¹ M with a lower detection limit of 1.2 × 10⁻⁶ M within pH range 6.5–7.5 with a response time of <15 s and a Nernstian slope of 60.3 ± 0.3 mV decade⁻¹ of activity. Influences of the membrane composition, and possible interfering anions were investigated on the response properties of the electrode. Fast and stable response, good reproducibility and long-term stability are demonstrated. The sensor has a response time of 15 s and can be used for at least 65 days without any considerable divergence in their potential response. Selectivity coefficients determined with the separate solution method (SSM) and fixed interference method (FIM) indicate that high selectivity for acetate ion. The proposed electrode shows fairly good discrimination of acetate from several inorganic and organic anions. It was successfully applied to direct determination of acetate within food preservatives. Total concentration of acetic acid in vinegar samples were determined by direct potentiometry and the values agreed with those mentioned by the manufacturers.     

The anion recognition properties of Schiff base or its reductive system based on 2,2′-bipyridine derivatives

Two novel artificial receptors, 2,2′-bipyridine derivatives containing phenol group, have been designed and synthesized. The interaction of the receptors containing Schiff base or its reductive system with biologically important anions was determined by UV–vis and ¹H NMR titration experiments. Results indicate that receptors 1 and 2 show the strong binding ability for dihydrogen phosphate (H₂PO₄⁻), fluoride (F⁻), acetate (AcO⁻) and almost no binding ability for chloride (Cl⁻), bromide (Br⁻), iodide (I⁻). At the same time, the strongest binding ability of receptor 1 for H₂PO₄⁻ among studied anions is not influenced by the existence of other anions; as well as receptor 2 for F⁻. In addition, the binding ability of receptor 1 (Schiff base system) with various anions is stronger than that of receptor 2 (the reductive Schiff base system) due to the difference of electronic effect.     

Highly Thiocyanate‐Selective PVC Membrane Electrode Based on Lipophilic Ferrocene Derivative

A novel anion‐selective PVC membrane electrode based on bis‐[(3‐ferrocenyl)‐(2‐crotonic acid)] copper(II) complex [Cu(II)‐BFCA] as neutral carrier is described, which demonstrates excellent potentiometric response characteristics toward thiocyanate ion and anti‐Hofmeister selectivity sequence in following order: SCN^?>I^?>ClO >Sal^?>Br^?>NO >Cl^?≈NO >SO >SO . The electrode shows a near‐Nernstian response for thiocyanate ion in a wide range of 9.0×10^?7–1.0×10^?1 M with a detection limit 6.8×10^?7 M and a slope of ?59.1 mV/decade in pH 5.0 of phosphate buffer solution at 20 °C. The influences of lipophilic cationic and anionic additives on the response properties of the electrode were investigated. High sensitivity and wide linear dynamic range were observed for the electrode in the presence of hexadecyltrimethylammoniumborate (HTAB) as a lipophilic cationic additive. The electrode was successfully applied to the determination of thiocyanate ion in waste water and human saliva.     

Effect of various additives on the performance of a newly developed PVC based potentiometric sensor for anionic surfactants

A new poly(vinyl chloride) PVC membrane electrode to determine monomer concentrations of dodecylbenzenesulphonate ions (DBS⁻) based on a neutral ion-pair carrier complex of dodecyltrimethylammonium–dodecylbenzenesulphonate (DTA⁺–DBS⁻), is reported here. The electrode exhibits a slope of 51.25 mV per decade for DBS⁻ ions. The DBS⁻ ion selective electrode (ISE) can determine monomer units down to concentrations as low as 3.32 × 10⁻⁴ M. The effect of three kinds of additives, i.e. alcohols, glycols and triblock polymers on the performance of the surfactant selective electrode is studied systematically. The effect of foreign anions along with primary ions on the performance of ion-selective electrode is investigated in terms of potentiometric selectivity coefficients, which were determined using the fixed interference method (FIM) at 1.0 × 10⁻² M concentration of foreign anions. The sensor responds well to the surfactant ions in the presence of additives at lower concentration. The Gibbs free energy of micelle formation (ΔG_m) of sodium dodecylbenzenesulphonate (SDBS) in the presence of various additives is calculated and found to vary differently with respect to the increase in the amount of additives. The sensor worked in the acidic pH range with a short response time of 30 s. The lifetime of the sensor is more than three months. The sensor was further used to determine the amount of DBS⁻ in local detergents. This method of determining anionic surfactants was found to be quite accurate when compared with classical methods.     

Identification and Separation of Some Anions on Plain and Mixed Adsorbent Layers Using Water as Eluent

The analytical potential of water as an eluent in thin layer chromatographic separation of various anions on plain adsorbent layers (silica gel "G" alumina, and cellulose) as well as on beds containing different combinations of silica gel, alumina, or cellulose has been investigated. In addition to some important separation of anions, microgram separation of IO⁻₄ from milligram quantities of IO⁻₃, Bro⁻₃, MoO²⁻₄, and Fe (CN)³⁻₆ has been realized. The effect on pH of the sample in the separation of IO⁻₄ from accompanying ions has also been studied. The limits of detection and dilution limits of anions on alumina thin layers have been determined. NO⁻₂ in artificial seawater has been detected. The effect of CaCl₂, MgCl₂, and NaHCO₃ on some ternary separations of analytical importance has been examined.     

Potentiometric Membrane Sensor for Determination of Saccharin

A potentiometric poly(vinyl chloride) membrane sensor for determination of saccharin is described. It is based on the use of Aliquat 336S-saccharinateion-pair as an electroactive material in plasticized PVC membranes with o-nitrophenyloctylether or dioctylphthalate. The sensor is conditioned for at least two days in 0.1 mol L⁻¹ sodium saccharinate before use. It exhibits fast, stable and Nernstian response for saccharinate ions over the concentration range of 1.0 × 10⁻¹–5.0 × 10⁻⁵ mol L⁻¹ and pH range of 4.5–11. The sensor is used for determination of saccharin in some dosage forms. Results with an average recovery of 101% and a mean standard deviation of 0.2% are obtained which is compared favourably with data obtained using the British pharmacopoeia method. The sensor shows reasonable selectivity towards saccharin in presence of many anions and natural sweeteners.     

Characterization of a Novel Tellurite Selective Electrode

Tellurium was determined by introducing a solid membrane for the selective determination of tellurite ion. An electrode composed of a compressed disk containing a mixture of HgTeO₃and Hg₂Cl₂was found to give a typical Nernstian response of 29 mV/concentration decade for the concentration range 10⁻⁵to 10⁻¹M). The connection was made by Hg metal instead of aqueous inner filling. The optimum pH was 3.5–10.5. The selectivity of the electrode toward several inorganic and organic anions was estimated. The electrode was applied to the determination of tellurium in binary mixtures with a mean recovery of 98.99% and relative standard deviation range of 0.19–0.51%.     

Crystal Structure of Sodium Perchloratotriacetatoneptunate(V) Monohydrate Na<Subscript>3</Subscript>NpO<Subscript>2</Subscript>(OOCCH<Subscript>3</Subscript>)<Subscript>3</Subscript>ClO<Subscript>4</Subscript> · H<Subscript>2</Subscript>O

The crystal structure of Na₃NpO₂(OOCCH₃)₃ClO₄ · H₂O was studied by single-crystal X-ray diffraction method. The structure is composed of the complex anions NpO₂(OOCCH₃)₃]²⁻, perchlorate anions, Na cations, and water molecules. The oxygen environment of Np(V) is a hexagonal bipyramid whose equatorial plane is formed by the oxygen atoms of three acetate ions. In addition to the acetate anions, the structure contains the perchlorate ion whose oxygen atoms, except for one, are included in the coordination environment of Na⁺ cations.__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 8, 2005, pp. 636–640.Original Russian Text Copyright © 2005 by Charushnikova, Fedoseev, Starikova.     

Tunability of anion binding strength based on acyl-thiourea receptors containing isatin group

Some acyl-thiourea derivatives containing isatin group were synthesized and their interactions with anions were investigated using UV–vis spectroscopy and ¹H NMR titrations in DMSO and DMSO-d₆, respectively. These compounds have a same molecular framework, functionalising with different groups lead to different anion binding strength of these receptors. Receptor 1 showed a higher binding affinity for AcO⁻ than for F⁻, due to the cooperative multiple hydrogen bond interactions of AcO⁻ with the acyl-thiourea group and N–H group in the indole unit of receptor 1. Displacing the N–H proton in the indole unit with –CH₃ group, receptor 2 showed no obviously discriminative responses for F⁻, AcO⁻ and H₂PO₄⁻ due to lack of such additional binding. In the case of receptor 3, which was functionalised with strong electron-withdrawing group, it showed selectively chromogenic response for F⁻ based on double deprotonation of the receptor in DMSO, whereas AcO⁻ and H₂PO₄⁻ induced single deprotonation only.     

Aluminum(III) Porphyrins as Ionophores for Fluoride Selective Polymeric Membrane Electrodes

Aluminum(III) porphyrins are examined as potential fluoride selective ionophores in polymeric membrane type ion‐selective electrodes. Membranes formulated with Al(III) tetraphenyl (TPP) or octaethyl (OEP) porphyrins are shown to exhibit enhanced potentiometric selectivity for fluoride over more lipophilic anions, including perchlorate and thiocyanate. However, such membrane electrodes display undesirable super‐Nernstian behavior, with concomitant slow response and recovery times. By employing a sterically hindered Al(III) picket fence porphyrin (PFP) complex as the membrane active species, fully reversible and Nernstian response toward fluoride is achieved. This finding suggests that the super‐Nernstian behavior observed with the nonpicket fence metalloporphyrins is due to the formation of aggregate porphyrin species (likely dimers) within the membrane phase. The steric hindrance of the PFP ligand structure eliminates such chemistry, thus leading to theoretical response slopes toward fluoride. Addition of lipophilic anionic sites into the organic membranes enhances response and selectivity, indicating that the Al(III) porphyrin ionophores function as charged carrier type ionophores. Optimized membranes formulated with Al(III)‐PFP in an o‐nitrophenyloctyl ether plasticized PVC film exhibit fast response to fluoride down to 40 μM, with very high selectivity over SCN^?, ClO₄^?, Cl^?, Br^? and NO₃^? (k^pot<10^?3 for all anions tested). With further refinements in the membrane chemistry, it is anticipated that Al(III) porphyrin‐based membrane electrodes can exhibit potentiometric fluoride response and selectivity that approaches that of the classical solid‐state LaF₃ crystal‐based fluoride sensor.     

Formation of Cr(III) Hydroxides from Chrome Alum Solutions: 1. Precipitation of Active Chromium Hydroxide

The formation of active chromium hydroxide, Cr(OH)₃·3H₂O, was studied through potentiometric titrations and turbidimetric measurements. UV-Vis and IR spectroscopies were also employed to characterize the synthesized solid. The rapid addition of NaOH solution to aqueous chrome alum (KCr(SO₄)₂·12H₂O) solutions caused the immediate precipitation of the active material. Only monomeric Cr(III) species seemed to be participating in the precipitation process; neither chromium polymers nor complexes with anions (SO²⁻₄, Cl⁻, NO⁻₃, ClO⁻₄) influenced the fast formation of Cr(OH)₃·3H₂O. Titration studies allowed the determination of several hydrolysis and precipitation constants for Cr(III). Nevertheless, they cannot be used for the estimate of Cr(OH)⁰₃formation constant.     

Gas phase anion reactions at atmospheric pressure : Atmospheric pressure ionization mass spectrometric studies related to the electron-capture detector

Negative ion atmospheric pressure ionization mass spectrometry has been used to investigate the gas phase atmospheric pressure anion chemistry of N₂O₂H⁻ and . N₂O₂H⁻ has been shown to be a stronger base than . Specific types of reaction (e.g. proton abstraction, and dehydration) have been identified for each of these anions. Although the analytical significance of these reactions has not yet been demonstrated, certain compounds such as alcohols which do not readily attach electrons directly can easily be detected by observing a specific anion reaction product. The technique appears to provide an additional dimension to established gas chromatographic—mass spectrometric analyses.     

Potentiometric sensors for Ag+ based on poly(3-octylthiophene) (POT)

Potentiometric ion sensors were prepared from the conjugated polymer poly(3-octylthiopene) (POT). The influence of additional membrane components, including silver 7,8,9,10,11,12-hexabromocarborane (AgCB₁₁H₆Br₆) and potassium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (KTpFPB) as lipophilic salts, and [2.2.2]p,p,p-cyclophane as silver ionophore, was studied. The membrane components were dissolved in chloroform and membranes were prepared by solution casting on glassy carbon disk electrodes. For comparison, POT-based potentiometric sensors were also prepared by galvanostatic electrosynthesis of POT from the 3-octylthiophene monomer. All the POT-based ion sensors fabricated by solution casting show Nernstian or slightly sub-Nernstian response to Ag⁺, even those based only on POT without any additional membrane components. The potentiometric response of electrochemically polymerized POT depends on the film thickness and the doping anion incorporated in the conducting polymer during polymerization. It is of particular importance that chemically synthesized undoped POT (without any additives) shows a sensitive and selective potentiometric response to Ag⁺ ions although UV-vis results show that POT remains in its undoped form, i.e., POT is not oxidized by Ag⁺. This indicates that undoped POT can exhibit good sensitivity and selectivity to Ag⁺ also in the absence of metallic silver in the polymer film. In this case, the potentiometric response is related to interactions between Ag⁺ and the conjugated polymer backbone. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, 13–16, 2005     

新型三脚架苯甲醛苯腙醋酸根选择性比色化学传感器

本文合成了一个新的基于三脚架苯甲醛苯腙的能够选择地检测醋酸根离子的比色化学传感器1。用紫外可见吸收光谱证实了受体1在二甲基亚砜溶液中对醋酸根离子高选择的键合能力超越了其它阴离子。和其他所研究的阴离子相比,其在二甲基亚砜中紫外可见吸收光谱对具有高选择性醋酸根离子的存在显示了应答,当存在（2´10^-5mol·dm^-3）醋酸根离子时其溶液的颜色也由黄色变化到蓝色。当用其他不同的客体阴离子（F^-, Cl^-, Br^-, I^-, H₂PO₄ ^–和 OH^-）处理受体1时,仅出现了很小的紫外可见吸收光谱变化。受体1对醋酸根的结合常数 K_ass为1.69´ 10⁴。     

C60 trianion-mediated electrocatalysis and amperometric sensing of hydrogen peroxide

Heterogeneous electrocatalytic reduction of hydrogen peroxide (H₂O₂) by C₆₀ is reported for the first time. C₆₀ is embedded in tetraoctylammonium bromide (TOAB) film and is characterized by scanning electron microscopy and cyclic voltammetry. Electrocatalytic studies show that the trianion of C₆₀ mediates the electrocatalytic reduction of H₂O₂ in aqueous solution containing 0.1 M KCl. Application of such film modified electrode as an amperometric sensor for H₂O₂ determination is also examined. The sensor shows a fast response within 1 s and a linear response is obtained (R = 0.9986) in the concentration range from 3.33 × 10⁻⁵ to 2.05 × 10⁻³ mol L⁻¹ for H₂O₂, with the detection limit of 2 × 10⁻⁵ mol L⁻¹ and the sensitivity of 1.65 μA mM⁻¹. A good repeatability and stability is shown for the sensor during the experiment.     

Determination of sulfur contents of SO3, S2O3 and S based on the electrocatalytic interaction with homogeneous mediator tris(2,2'-bipyridyl)Ru(II)

A sensitive voltammetric method has been developed for the determination of total or single species of sulfur anions containing sulfide, sulfite and thiosulfate. The method is based on the catalytic effect of tris(2,2'-bipyridyl)Ruthenium(II) (Ru(bpy)₂^+ 2) as a homogeneous mediator on the oxidation of those anions at the surface of a glassy carbon electrode. A reversible redox couple of Ru(II)/Ru(III) were observed as a solute in aqueous solution. Cyclic voltammetry study showed that the catalytic current of the system depends on the concentration of the anions. Optimum pH values for voltammetric determination of sulfite, thiosulfate and sulfide has been found to be 5.6, 10.0 and 10.0, respectively. Under the optimized conditions the calibration curves have been obtained linear in the concentration ranges of 0.8–500.0, 0.4–1000.0 and 0.5–5000.0 µmol L^− 1 of SO₃²⁻, S₂O₃²⁻ and S²⁻, respectively. The detection limits have been calculated to be 0.40, 0.17 and 0.33 µmol L^− 1 for SO₃²⁻, S₂O₃²⁻ and S²⁻, respectively. The diffusion coefficients of sulfite and thiosulfate have been estimated using chronoamperometry. The chronoamperometric method also has been used to determine the catalytic rate constant for catalytic reaction of the Ru(bpy)₂^+ 2 with sulfite and thiosulfate. Finally the proposed method has been used for the determination of total sulfur contents in real samples of water and wastewater. Moreover the sulfite content in sugar and sulfur dioxide in air has been determined with satisfactory results.     

Kinetics of the Formation of Goethite in the Presence of Sulfates and Chlorides of Monovalent Cations

The synthesis of goethite by oxidation of Fe²⁺in presence of metallic iron was undertaken in an aqueous medium containing indifferent salts such as Na₂SO₄, (NH₄)₂SO₄, NaCl, and NH₄Cl. Temperature and bubbling air rate were maintained, respectively, at 70°C and 1 L/min. The influence of anions and cations on the kinetics of each step of the process has been followed distinctly, the iron dissolution rate has been determined by the variation of the medium acidity, and the precipitation of goethite has been determined by gravimetric measurements. With respect to Cl⁻, the SO₄²⁻anion decreases the rate of the two reactions. NH₄⁺acts as an inhibitor when it is present at low concentrations and as an accelerator for higher concentrations; the limit corresponding to the change of NH₄⁺behavior depends on the nature of the counter ion. The reaction product is composed of pure goethite in the presence of sulfate salts, whereas a mixture of goethite and lepidocrocite, respectively, 60–70 and 40–30%, was observed in the presence of chloride salts.     

Perchlorate-selective membrane electrode based on a new complex of uranil

A potentiometric ion-selective electrode based on new compound, as a carrier, has been successfully developed for detection of perchlorate anion in aqueous solution. Within the perchlorate ion concentration range 1.0×10^–6 to 1.0 mol L^–1 the electrode had a linear response with a Nernstian slope of 60.6±1.0 mV per decade . The limit of detection as determined from the intersection of the extrapolated linear segments of the calibration plot was 8.0×10^–7 mol L^–1. The proposed electrode has fairly a good discriminating ability towards ClO₄^– ion in comparison to other anions. The sensor has a response time of 10 s and can be used for at least 2 months without substantial divergence in potential. It was successfully applied to direct determination of perchlorate in urine and water.