共查询到20条相似文献,搜索用时 15 毫秒
1.
Susheel K. Verma Girja Shankar Deepak Singh 《International Journal of Infrared and Millimeter Waves》1994,15(1):179-187
A balanced upconverter curcuit has been developed in planar transmission line configuration using NEC GaAs beam lead Schottky barrier diodes. RF power output of +1.6 dBm SSB is obtained at Ka-band when up converter is driven by +17 dBm IF and +20 dBm LO signal. 相似文献
2.
Susheel K. Verma Girja Shankar Deepak Singh 《International Journal of Infrared and Millimeter Waves》1994,15(3):559-566
A balanced upconverter circuit has been developed in planar transmission line configuration using NEC GaAs beam lead Schottky barrier diodes. RF power output of +1.6 dBm SSB is obtained at Ka-band when up converter is driven by +17 dBm IF and +20 dBm LO signal. 相似文献
3.
D. Bourret M. Alyari J. Regnier R. Sempere J. Zarzycki 《International Journal of Infrared and Millimeter Waves》1984,5(11):1483-1491
A Q band interferometer for determining the complex permittivity of solids and liquids between 20°C and 1300°C has been developed. The Roberts and Von Hippel standing-wave method was used. The technique involves the utilization of a computer-assisted digital voltmeter for data acquisition and treatment. Results for a 67SiO2–33Na2O within the temperature range 20–400°C and in the liqid state (950°C) are presented. 相似文献
4.
G. Jerinic J. Fines M. Cobb M. Schindler 《International Journal of Infrared and Millimeter Waves》1985,6(2):79-130
GaAs IMPATT diodes are capable of generating 2 to 3 W simultaneously with 18–22% efficiency in the 33 GHz to 46 GHz frequency band. The design of the amplifier circuits which utilize these devices is discussed. The circuit design is based on a 3-step closed form algorithm. The first step is a passive circuit characterization with an automatic network analyzer. In the second step, a computer is used to generate diode device lines. The third step is load line synthesis for predictable operation. The resulting performance is described. 2 W over a 2GHz bandwidth was achieved simultaneously with a minimum gain of 12 dB. 相似文献
5.
6.
7.
Ashok Mittal Virpal Singh K. D. Nayak 《International Journal of Infrared and Millimeter Waves》1999,20(10):1803-1808
This paper describes the design and development of Integrated Finline Trans-receiver at Ka-Band. Integrated trans-receiver has been designed for Simplex Voice Communication System. The trans-receiver includes a modulator, duplexer and a mixer integrated together on a single substrate RT Duroid 5880. Two Millimeter Wave Gunn sources, one as transmit source and the other one as Local Oscillator source, in Waveguide are connected externally. The system has been realised and tested with the integrated trans-receiver unit for ASK voice Communication System for a range of 2.5 KM LOS. The system is highly useful for short-range communication systems such as Hand-held Millimeter Wave Radio. 相似文献
8.
Neural Network Models for Finline Discontinuities 总被引:1,自引:0,他引:1
The radial basis network is used as the finline discontinuities electromagnetic artifical neural network(EMANN) models. EM software analysis is employed to characterize finline discontinuities. EMANN models are then trained using physical parameters and frequency as inputs and equivalent electric circuit element parameters of finline discontinuities as outputs. Once trained , the EMANN models can simulate equivalent electric circuit element parameters of finline step, notch and strip very fast and efficiently. 相似文献
9.
Chao Li Jun Xu Liangjin Xue 《International Journal of Infrared and Millimeter Waves》2001,22(2):351-359
Finline plays an important role in millimeter-wave integrated-circuit design. In this paper, a knowledge-based artifcial neural network is used to model the finline. Using prior knowledge input method and Bayesian regularization technique make the neural network models for finline reduce the amount of training data needed and prevent overfitting in neural network training. The neural network is electromagnetically developed with a set of training data that are produced by the fnite element method, which is robust both from the angle of time of computation and accuracy. 相似文献
10.
设计了一种适用于窄带高功率微波源系统的紧凑型TEM-TE11模式转换器。该结构首先将同轴波导沿角向分区使微波在各分区内相位传播常数不同,然后将相位传播常数较大的分区进行横向折叠设计以缩短系统轴向长度。分区传播的微波在模式转换器末端相位差达到180时,合成同轴波导中TE11模式。为L波段磁绝缘振荡器设计了模式转换器,并采用数值仿真程序进行计算,在1.31 GHz中心频率上,模式转换器转换效率为95%;在1.23~1.40 GHz频率上,模式转换器效率大于90%,相对带宽13%。将模式转换器应用于磁绝缘振荡器,并测量了天线的定向辐射能力,所得结果与设计一致。 相似文献
11.
介绍了L波段低温限幅器的设计和分析,并给出了测试结果.该限幅器具有插入损耗小、驻波低、限幅电平低及体积小等特点.在12K,限幅器插入损耗小于0.2dB,端口驻波比小于1.25,限幅性能较好. 相似文献
12.
A remote methane detection system has been developed using a single-frequency tunable optical parametric oscillator at 3.4 microm infrared wavelength. The infrared received light is converted by a frequency upconverter with a strong pump beam to near-infrared wavelength at 0.81 microm and detected by a sensitive photomultiplier. The conversion efficiency of the upconverter was 40% for the backscatter signal from a topographic target, and the detector sensitivity was 11 times higher than that of the cooled InAs detector. By raster scanning the infrared beam, imaging was realized for the methane gas plume with an accuracy of 20 parts in 10(6)m at the range of ~2m. 相似文献
13.
Ning Chunmei Yang Aiying Cui Jianmin Shen Shikui Wu Xiangyu Sun Yunan 《Optics Communications》2011,284(5):1412-1417
Two means of high speed optical sampling covering C band and L band based on sum frequency generation (SFG) in chirped periodically poled LiNbO3(CPPLN) waveguide are studied in this paper. For the first method, arbitrary waveband inside C and L band can be sampled by tuning pump wavelength and the bandwidth is controllable by choosing suitable waveguide length and chirped coefficient of CPPLN waveguide. For another, the broad bandwidth covering C band and L band can be obtained with a fixed pump. The numerical simulations based on coupled-wave equations are carried out. The NRZ sequences of 10 Gb/s and 640 Gb/s transmission rate are sampled in simulation. Distinct eye diagrams and quality factors (Q) are obtained by software-synchronized algorithm. The results show that the two means of the optical sampling both can cover C band and L band. SFG in CPPLN waveguide used for optical sampling system has a broad bandwidth and more flexible selectivity. 相似文献
14.
Radiative two-electron band to band transitions are investigated experimentally in silicon. The question of phonon-participation is investigated. It turns out that at low temperature the phononless transitions dominate, whereas above room-temperature the phonon-assisted transitions become more important. A theoretical discussion leads to the conclusion that at least one participating phonon is an acoustical one. 相似文献
15.
Leonardo R. A. X. de Menezes A. H. Machado P. S. R. Sisnando H. Abdalla Jr. 《International Journal of Infrared and Millimeter Waves》1996,17(11):1927-1935
A new model of absorbing boundary for the TLM Method, based on absorvence condition on the node, is presented. Numerical and experimental results are presented; and the convergence aspect is discussed. 相似文献
16.
Maria Rosa M. L. Albuquerque Gilcarlos R. Medeiros Sandro J. F. Oliveira Adaildo G. dAssunção 《International Journal of Infrared and Millimeter Waves》2005,26(6):855-866
The design of nonuniform bilateral finlines on anisotropic substrates for millimeter wave applications is presented. The taper consists of a planar circuit with smooth variation of the slot width profile along the structure. The spectral domain method and Galerkin procedure are combined with the transmission line theory for studying the behavior of tapered bilateral finlines and evaluation of their design parameters. The influence of the substrate anisotropy on the propagation characteristics of these structures is also examined. This technique is general and can be applied to investigate a broad class of planar transmission line tapers. 相似文献
17.
We present here a detailed theoretical analysis for realizing an inherently gain flattened L+ band thulium doped fiber amplifier (TDFA), based on a depressed inner-clad (W-fiber) design, wherein the inherent gain flattening is achieved by an optimized bend induced leakage loss. The leakage loss characteristics of W-fiber have been used to suppress higher wavelength amplified stimulated emission (ASE) in the designed TDFA, which otherwise depletes the population inversion in the amplifier, making it almost impossible to obtain high gain for wavelengths in and close to the conventional L-band. It has been shown through simulations that 20 dB net gain (±0.3 dB ripple) is achievable over 32 nm bandwidth (1604-1636 nm), using this design pumped with 160 mW of power. We also show that inherent gain flattening leads to redistribution of power among signal wavelengths, and hence an inherently gain-flattened TDFA is much more efficient as compared to a configuration that uses discrete filters for gain flattening. The net gain value and gain flattening of the designed TDFA module have been tested against tolerance with respect to fiber parameters as well as bend radius. This is for the first time to the authors knowledge that inherently gain flattened L+ band operation has been shown using TDFAs. 相似文献
18.
19.
20.
设计了一种适用于窄带高功率微波源系统的紧凑型TEM-TE11模式转换器。该结构首先将同轴波导沿角向分区使微波在各分区内相位传播常数不同,然后将相位传播常数较大的分区进行横向折叠设计以缩短系统轴向长度。分区传播的微波在模式转换器末端相位差达到180时,合成同轴波导中TE11模式。为L波段磁绝缘振荡器设计了模式转换器,并采用数值仿真程序进行计算,在1.31 GHz中心频率上,模式转换器转换效率为95%;在1.23~1.40 GHz频率上,模式转换器效率大于90%,相对带宽13%。将模式转换器应用于磁绝缘振荡器,并测量了天线的定向辐射能力,所得结果与设计一致。 相似文献