Capillary zone electrophoresis with pre-column NDA derivatization and amperometric detection for the analysis of four aliphatic diamines

A method was developed for the analysis of four aliphatic diamines by capillary zone electrophoresis using pre-column derivatization with naphthalene-2,3-dicarboxaldehyde (NDA)/CN⁻ and amperometric detection. The pre-column derivatization reaction conditions including the molar ratio of NDA to amines, the cyanide concentration, the pH value of derivatization buffer, and the reaction time, were investigated. The separation of four derivatives of aliphatic diamines has been optimized by capillary zone electrophoresis (CZE) using end-column amperometric detection with a carbon fiber microelectrode, at a constant potential of 0.7 V versus SCE. The optimum conditions for the separation were 10 mM Tris-H₃PO₄ (pH 4.0) for the running buffer solution, 15 kV for the separation voltage. The detection limits for diaminopropane, putrescine, cadaverine, diaminohexane were 6.7×10⁻⁸, 5.1×10⁻⁸, 1.9×10⁻⁷ and 3.8×10⁻⁷ M, respectively (S/N=3). The proposed method was applied to the determination of aliphatic diamines in a lake water sample by the standard addition method. The recovery of these amines in water was 89.9-107%.     

Microchannel electrophoretic separation of biogenic amines by micellar electrokinetic chromatography

Fast, efficient separation of most common biogenic amines was successfully performed on a glass microchip capillary electrophoresis device. The amines putrescine, histamine, tyramine, cadaverine, phenethylamine, tryptamine, spermidine and spermine were derivatized prior to fluorescence detection with fluorescein isothiocyanate. Separation was carried out using a channel length of 28 mm, a cross section of 50 x 8 microm, and a field strength of 600 V/cm. After optimization of buffer electrolyte conditions (120 mM boric acid, pH 9.4, modified with 40 mM SDS), fluorescein thiocarbamyl amine derivatives were successfully resolved. Analysis time was as short as 75 s. Determination of the biogenic amines was achieved in soy sauce samples.     

Determination of biogenic amines by capillary zone electrophoresis with conductometric detection

A capillary zone electrophoresis (CZE) method with conductometric detection of biogenic amines (cadaverine, putrescine, agmatine, histamine, tryptamine and tyramine) is described. The optimised background electrolyte was the following: 15 mM histidine + 5 mM adipic acid + 1.5 mM sulphuric acid + 0.1 mM ethylenediaminotetraacetic acid + 0.1% hydroxyethylcellulose + 50% methanol. A clear separation of six biogenic amines from other components of acidic sample extract was achieved within 10 min. Method characteristics, i.e., linearity (0-100 micromol/ml), accuracy (recovery 86-107%), intra-assay repeatability (2-4%), and detection limit (2-5 micromol/l) were evaluated. Low laboriousness, sufficient sensitivity, speed of analysis, and low running cost are important attributes of this method. The developed method was successfully applied on the determination of biogenic amines in selected food samples.     

Aqueous sulfuric acid as the mobile phase in cation ion chromatography for determination of histamine, putrescine, and cadaverine in fish samples

Aqueous sulfuric acid can be used as the mobile phase in cation ion chromatography to separate the three biogenic amines, putrescine, cadaverine, and histamine, from fish. Various concentrations of aqueous sulfuric acid were investigated to optimize the separation of these three biogenic amines. Aqueous sulfuric acid (5.0 mM) was found to be optimum for the separation and was used to determine the three biogenic amines in fish. The LOQ, defined as the lowest level of the standard calibration curve, was 0.055 ppm (equivalent to 0.55 microg/g sample) for putrescine, 0.05 ppm (equivalent to 0.5 microg/g sample) for cadaverine, and 1.0 ppm (equivalent to 10 microg/g sample) for histamine. From statistical analysis of the LOQ, the method detection limit was 0.003 ppm for putrescine, 0.009 ppm for cadaverine, and 0.16 ppm for histamine. For sample preparation, the fish was composited, homogenized in methanol-water (75 + 25, v/v), incubated for 15 min at 60 degrees C, and centrifuged. The sample solution was micron-filtered before injection. The mobile phase flow rate was 0.8 mL/min under isocratic conditions at room temperature (15-25 degrees C). The three biogenic amines were separated in the order of increasing retention time, i.e., putrescine, cadaverine, and histamine, within 30 min. The chromatograms showed complete peak separation of the three amines regardless of the difference in fish matrixes.     

Determination of biogenic amines by capillary electrophoresis

A method for determining biogenic amines in food using micellar electrokinetic capillary chromatography has been developed. Derivatization of the amines was performed with AccQ (6-aminoquinolyl-N-hydroxysuccinimidyl carbamate; Waters, Milford, MA, USA) reagent. The influence of buffer composition on the separation (including pH, SDS concentration and various additives) was investigated. The separation of seven biogenic amines (histamine, tyramine, tryptamine, spermine, spermidine, cadaverine and putrescine) could be achieved within 25-30 min with good repeatability. The biogenic amine profiles in three different food samples (wine, salami and chive) were determined and quantitated.     

Optimization of chromatographic parameters for the determination of biogenic amines in wines by reversed-phase high-performance liquid chromatography

A method suitable for the determination of eight biogenic amines (histamine, tyramine, phenylethylamine, tryptamine, cadaverine, putrescine, spermidine and spermine) in wines has been developed. The method involves derivatization of the amines by treatment with dabsyl chloride, after which the derivates were analysed by reversed-phase liquid chromatography with gradient elution and spectrophotometric detection at 446 nm. Different variables affecting separation were optimized. Validation of the method included calibration experiments, the addition of standards amines for the determination of recovery and repeatability tests. Good linearity of the responses was obtained up to 500 microg l(-1), except for putrescine (up to 2100 microg l(-1)). The detection limits ranged between 10 and 60 microg l(-1) for standard solutions. The method was successfully applied to the analysis of five Spanish wines.     

Determination of biogenic amines as their benzoyl derivatives after cloud point extraction with micellar liquid chromatographic separation

The advantages of micellar cloud point extraction combined with a surfactant-assisted separation in a HPLC system are presented as a method for the effective separation and determination of nine biogenic amines in fish substrates. Benzoyl derivatives of the amines are extracted inside the micelles of a non-ionic surfactant, Triton X-114, and separated with gradient elution micellar liquid chromatography. Quantification was performed by measuring the UV absorbance of the benzene ring at 254 nm. Detection limits of the nine biogenic amines were in the vicinity of 0.01 mg l(-1) which are approximately 10 times lower than those of the conventional method (HPLC-UV) and 100 times lower than those of micellar electrokinetic capillary chromatography. The correlation coefficients of determinations were 0.9911-0.9996. The method was applied for the determination of putrescine, cadaverine, agmatine, tyramine, tryptamine, phenylethylamine, spermine, spermidine and histamine in trout samples. Recovery of the proposed method ranged from 95 to 103.5%.     

In-capillary derivatization and analysis of amino acids,amino phosphonic acid-herbicides and biogenic amines by capillary electrophoresis with laser-induced fluorescence detection

This paper describes a general approach for the in-capillary derivatization of amino compounds and the subsequent sensitive determination of the derivatives by micellar electrokinetic chromatography (MEKC) or capillary zone electrophoresis (CZE) with laser-induced fluorescence (LIF) detection. Amino acids, biogenic amines and amino phosphonic acid-herbicides were chosen as model analytes to evaluate the analytical potential of this approach. Fulfilment of the in-capillary reaction of the analytes using LIF detection hinged on the excellent labeling chemistry of 5-(4,6-dichloro-s-triazin-2-ylamino)fluorescein (DTAF) and the good resolution achieved in the separation of derivatized analytes. Careful optimization of the electrophoretic conditions in the mixing step of this protocol allowed the determination of amino acids, biogenic amines and phosphorus-containing amino acid-herbicides with concentration limits of detection at the nug/L level and relative standard deviations from 3.5 to 5.8%. The whole analysis is carried out within 20 min, resulting in a very simple, fast and practical approach for the fully automated analysis of amino acids and related compounds in low-volume and low-concentration samples.     

Selective fluorometric detection of polyamines using micellar electrokinetic chromatography with laser-induced fluorescence detection

The polyamines putrescine, cadaverine, spermine and spermidine were separated and quantified by micellar electrokinetic chromatography (MEKC) with laser-induced fluorescence detection. The derivatization reagent, 1-pyrenebutanoic acid succinimidyl ester (PSE), allowed for the selective detection of the polyamines at 490 nm. Multiple labeling of the polyamines with PSE allows the formation of intramolecular excimers that emit at longer wavelengths (450-520 nm) than mono-labeled analytes (360-420 nm). Optimal separation of the labeled polyamines was achieved using a separation buffer consisting of 10 mM phosphate pH 7.2, 30 mM cholate, and 30% acetonitrile. Using these conditions, the four polyamines were separated in under 10 min. Limits of detection for putrescine, cadaverine, spermine and spermidine were 6, 5, 15 and 13 nM, respectively. These are superior or comparable to those previously reported in the literature using fluorescence detection.     

Interference of the Simultaneous Presence of Different Biogenic Amines on the Response of an Amine Oxidase–Based Biosensor

Abstract

The application of an amine oxidase–based biosensor, which was selective for several biogenic amines, was examined for the simultaneous detection of cadaverine, putrescine, and histamine. The biosensor response parameters in mixtures containing cadaverine or putrescine were 1.14 times less than the sum of corresponding parameters in single-substrate solutions. Histamine did not cause any change of the biosensor response in the presence of cadaverine and/or putrescine. This “screening” of biosensor signal parameters by putrescine and cadaverine should be considered during calibration of amine oxidase–based biosensors used for the detection of biogenic amines.     

Poly(dimethylsiloxane) microchip for precolumn reaction and micellar electrokinetic chromatography of biogenic amines

We have demonstrated that precolumn derivatization and capillary electrophoresis separation on a poly(dimethylsiloxane) (PDMS) microchip can be realized as efficient as those on glass microchips. In an optimized condition of micellar electrokinetic chromatography (MEKC), using 25 mM sodium borate buffer (pH 10.0) with 25 mM sodium dodecyl sulfate (SDS) and 5% v/v methanol, the electroosmotic flow in an oxidized PDMS microchip is stabilized within 3% for days. By employing a fluorometric derivatization with o-phthaldialdehyde (OPA) in an optimally designed reaction chamber, four most important biogenic amines occurring in foods, histamine, tyramine, putrescine, and tryptamine, are quantitatively determined in less than 1 min at the levels applicable to real samples. The migration behaviors of anionic OPA-derivatized biogenic amines under the MEKC conditions are analyzed, and it has been found that under our separation conditions, the electrophoretic mobility of the SDS micelles is significantly greater than those of the anions in the aqueous phase. The channel manifold in a PDMS substrate is fabricated using replica molding against a thick photoresist, SU-8, pattern generated by photolithography. The plate with the microchannel pattern is strongly, irreversibly bonded to another PDMS plate by using a new bonding technique, which employs surface oxidation by corona discharge generated from a cheap, handy source, Tesla coil.     

Violet light emitting diode-induced fluorescence detection combined with on-line sample concentration techniques for use in capillary electrophoresis

The first application of a violet light-emitting diode (LED) for fluorescence detection in capillary electrophoresis (CE) is described. The utility of violet LED (peak emission wavelength at 410 nm, approximately 2 mW) for fluorescence detection is demonstrated by examining reserpine and dopamine-labeled NDA (naphthalene-2,3-dicarboxaldehyde), respectively. The detection limit for reserpine was determined to be 2.5 x 10(-6) M by normal micellar electrokinetic capillary chromatography (MEKC) and this was improved to 2.0 x 10(-9) M and 2.0 x 10(-10) M when sweeping-MEKC and cation-selective exhaustive injection (CSEI)-sweep-MEKC techniques were applied, respectively. In addition, the detection limit of NDA-labeled dopamine was determined to be 6.3 x 10(-6) M by means of normal MEKC and this was improved to 3.0 x 10(-8) M when the sweeping-MEKC mode was applied.     

Derivatization, stabilization and detection of biogenic amines by cyclodextrin-modified capillary electrophoresis-laser-induced fluorescence detection

o-Phthalaldehyde (OPA) derivatives of eight biogenic amines were stabilized at 5 degrees C by forming inclusion complexes with methyl-beta-cyclodextrin (MBCD). The derivatives were separated and detected by cyclodextrin-modified capillary electrophoresis (CE) with UV or laser-induced fluorescence (LIF) detection. Using a borate buffer, pH 9.0 consisting of ethanol and a mixture of negatively charged sulfobutylether-beta-cyclodextrin and neutral MBCD, baseline separation of the eight OPA derivatives was achieved within 25 min with high separation efficiencies. The detection limits (S/N=3) obtained by UV and LIF detection were determined to be 10 microM and 0.250 microM, respectively. Glutamic acid was added after the initial derivatization step to neutralize residual OPA which otherwise caused a significant interference, particularly when analysis was performed around the detection limit of the OPA derivatives. Important biogenic amines in fish, wine and urine were then derivatized and determined by CE-LIF. In the case of sole and rainbow trout, the results obtained were validated by an enzymatic assay using putrescine oxidase.     

Determination of biogenic amines in fresh and processed meat by suppressed ion chromatography-mass spectrometry using a cation-exchange column

A new method for simultaneous determination of underivatized biogenic amines based on the separation by cation-exchange chromatography and suppressed conductivity coupled with mass spectrometry detection has been developed. The method has been applied to the analysis of cadaverine, putrescine, histamine, agmatine, phenethylamine and spermidine in processed meat products. The amines were extracted from muscle tissue with methanesulfonic acid without any additional derivative step or sample clean-up. Biogenic amines were separated by the IonPac CS17 column, a cation-exchange column used with gradient elution, and detection was done by suppressed conductivity and mass spectrometry. Tyramine was simultaneously analysed by using a spectrophotometer (275 nm) before the suppressed conductivity detection. Linearity of response was obtained in the range 0.25-25 microg mL(-1). The detection limits ranged from 23 microg L(-1) for putrescine to 155 microg L(-1) for spermidine (suppressed conductivity) and from 9 microg L(-1) for agmatine to 34 microg L(-1) for spermidine (MS). Average recoveries from meat samples ranged from 85 to 97% and coefficients of variation ranged from 4.5 to 9.7%. The analysis of biogenic amines in fresh and processed meats (dry-cured, cooked and fermented products) can be used as a quality marker of raw material and for studying the relationship between their changes and the fermentation process involved in dry sausage ripening.     

Direct tris(2,2'-bipyridyl)ruthenium (II) electrochemiluminescence detection of polyamines separated by capillary electrophoresis

Capillary electrophoresis (CE) with tris(2,2'-bipyridyl) ruthenium (II) (Ru(bpy)3(2+)) electrochemiluminescence (ECL) detection technique was developed for the analysis of four polyamines (putrescine (Put), cadaverine (Cad), spermidine (Spd), and spermine (Spm)) analysis. The four polyamines contain different amine groups, which have different ECL activity. There are several parameters which influence the resolution and ECL peak intensities, including the buffer pH and concentrations, separation voltage, sample injection, electrode materials, and Ru(bpy)3(2+) concentrations. Polyamines are separated by capillary zone electrophoresis in an uncoated fused-silica capillary (50 cmx25 micro m (ID) filled with acidic phosphate buffer (200 mmol/L phosphate, pH 2.0) - 1mol/L phosphoric acid (9:1 v/v) and a separation voltage of 5 kV (25 micro A), with end-column Ru(bpy)3(2+) ECL detection. A 5 mmol/L Ru(bpy)3(2+) solution plus 200 mmol/L phosphate buffer (pH 11.0) is added into the reagent reservoir. The calibration curve is linear over a concentration range of two or three orders of magnitude for the polyamines. The analysis time is less than 25 min. Detection limits for Put and Cad are 1.9x10(-7) mol/L and 7.6x10(-9) mol/L for Spd and Spm, respectively. Intraday and interday relative standard deviations of ECL peak intensities are less than 8%. The main advantages of this CE-ECL detection technique for polyamines analysis presented herein are the omission of chemical derivatization of the analytes and the high selectivity.     

Determination of biogenic amines in alcoholic beverages by ion chromatography with suppressed conductivity detection and integrated pulsed amperometric detection

The determination of biogenic amines in alcoholic beverages is important to assess the potential risks associated with the consumption of high concentrations of these compounds. In addition, product storage conditions and the length of storage can cause the formation of biogenic amines that reduce product quality. We report a new method using cation-exchange chromatography with either suppressed conductivity, integrated pulsed amperometry, UV, or a combination of these detection techniques to determine biogenic amines in alcoholic beverages. The main objective was to provide a direct comparison between IPAD and suppressed conductivity detection for determining biogenic amines in alcoholic beverages. Suppressed conductivity is the simplest detection approach for determining putrescine, cadaverine, histamine, agmatine, phenylethylamine, spermidine, and spermine with good sensitivity (0.004-0.08 mg/l) and was used to evaluate the influence of storage time and conditions on the evolution of biogenic amines in alcoholic beverages. Integrated pulsed amperometric detection (IPAD) detects more biogenic amines than suppressed conductivity detection, enabling the detection of dopamine, tyramine, and serotonin. Tyramine was simultaneously determined by UV detection and IPAD to provide confirmation and ensure the accuracy of the analytical results. The linearity of biogenic amine responses was within 0.1-20 mg/l and peak area precisions were 0.24-4.97% for IPAD, suppressed conductivity-IPAD, and UV detection. The sensitivity for the 10 biogenic amines using the 3 detection techniques varied considerably from 0.004-1.1 mg/l and recoveries were within 85-122%.     

Condensation nucleation light scattering detection for biogenic amines separated by ion-exchange chromatography.

A sensitive method of analysis for biogenic amines, putrescine, cadaverine, histamine and an amino acid precursor, histidine is described herein using ion-exchange chromatography and condensation nucleation light scattering detection. The method was successfully used for the analysis of biogenic amines in fish samples. The method offers a number of advantages: fast elution of analytes with no need for mobile phase conductivity suppression, no derivatization and no electrochemical activity for the analyte's detection. The 3 sigma detection limits for these compounds were found to range from 8 to 20 ng/ml.     

Speciation of chromium by in-capillary reaction and capillary electrophoresis with chemiluminescence detection

A sensitive method for the simultaneous determination of chromium(III) (Cr3+) and chromium(VI) (CrO4(2-)) using in-capillary reaction, capillary electrophoresis (CE) separation and chemiluminescence (CL) detection was developed. The chemiluminescence reaction was based on luminol oxidation by hydrogen peroxide in basic aqueous solution catalyzed by Cr3+ ion followed by capillary electrophoresis separation. Based on in-capillary reduction, chromium(VI) can be reduced by acidic sodium hydrogensulfite to form chromium(III) while the sample is running through the capillary. Before the electrophoresis procedure, the sample (Cr3+ and CrO4(2-)), buffer and acidic sodium hydrogensulfite solution segments were injected in that order into the capillary, followed by application of an appropriate running voltage between both ends. As both chromium species have opposite charges, Cr3+ ions migrate to the cathode, while CrO4(2-) ions, moving in the opposite direction toward the anode, react with acidic sodium hydrogensulfite which results in the formation of Cr3+ ions. Because of the migration time difference of both Cr3+ ions, Cr(III) and Cr(VI) could be separated. The running buffer was composed of 0.02 mol l(-1) acetate buffer (pH 4.7) with 1 x 10(-3) mol l(-1) EDTA. Parameters affecting CE-CL separation and detection, such as reductant (sodium hydrogensulfite) concentration, mixing mode of the analytes with CL reagent, CL reaction reagent pH and concentration, were optimized. The limits of detection (LODs) of Cr(III) and Cr(VI) were 6 x 10(-13) and 8 x 10(-12) mol l(-1) (S/N=3), respectively. The mass LODs for Cr(III) and Cr(VI) were 1.2 x 10(-20) mol (12 zmol) and 3.8 x 10(-19) mol (380 zmol), respectively.     

Analytical potential of 6-oxy-(N-succinimidyl acetate)-9-(2'-methoxycarbonyl) fluorescein for the determination of amino compounds by capillary electrophoresis with laser-induced fluorescence detection

The analytical potential of a fluorescein analogue, 6-oxy-(N-succinimidyl acetate)-9-(2'-methoxycarbonyl) fluorescein (SAMF), for the first time synthesized in our laboratory, as a labeling reagent for the labeling and determination of amino compounds by capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection was investigated. Biogenic monoamines and amino acids were chosen as model analytes to evaluate the analytical possibilities of this approach. The derivatization conditions and separation parameters for the biogenic amines were optimized in detail. The derivatization was performed at 30 degrees C for 6 min in boric acid buffer (pH 8.0). The derivatives were baseline-separated in 15 min with 25 mM boric acid running buffer (pH 9.0), containing 24 mM SDS and 12.5% v/v acetonitrile. The concentration detection limit for biogenic amines reaches 8 x 10(-11) mol.L(-1) (signal-to-noise ratio = 3). The application of CE in the analysis of the SAMF-derivatized amino acids was also exploited. The optimal running buffer for amino acids suggested that weak acidic background electrolyte offered better separation than the basic one. The proposed method was applied to the determination of biogenic amines in three different beer samples with satisfying recoveries varying from 92.8% to 104.8%. Finally, comparison of several fluorescein-based probes for amino compounds was discussed. With good labeling reaction, excellent photostability, pH-independent fluorescence (pH 4-9), and the resultant widely suited running buffer pH, SAMF has a great prospect in the determination of amino compounds in CE.     

On-capillary chemiluminescence detection for capillary electrophoresis with a single capillary.

On-capillary chemiluminescence detection for capillary electrophoresis with a single capillary was reported. A hole (about 30 microm diameter) was made on the capillary wall at about 50.5 cm from the inlet end. Hydrogen peroxide solution could enter the capillary from the hole, and mixed with luminol and copper(II) to produce chemiluminescence. The chemiluminescence was detected by a PMT under the hole. Several factors that influenced chemiluminescence intensity were investigated. The detection limits for luminol and N-(4-aminolbutyl)-N-ethylisoluminol (ABEI) were 1 x 10(-11) and 2 x 10(-10) mol L(-1), respectively. The method features simple construction and no dead volume.