Mixed-metal (platinum, palladium), mixed-pyrimidine (uracil, cytosine) self-assembling metallacalix[n]arenes: dynamic combinatorial chemistry with nucleobases and metal species

Reactions between the mononuclear mixed-nucleobase complex [Pt(en)(UH-N1)(CH2-N3)]+ (1; en: ethylenediamine; UH-N1: uracil monoanion bonded through the N1 atom; CH2-N3: neutral cytosine bonded through the N3 atom) and [Pd(II)(en)] or [Pd(II)(2,2'-bpy)] (2,2'-bpy: 2,2'-bipyridine) lead to libraries of compounds of different stoichiometries and different connectivities. In these compounds, the palladium entity binds to or cross-links either the N3 sites of uracil and/or the N1 sites of cytosine, following deprotonation of these positions to give uracil dianions (U) and cytosine monoanions (CH). Cyclic species, which can be considered as metallacalix[n]arenes, have been detected in several cases, with n being 4 and 8. The complexity of the compounds formed not only results from the possibility of the two different nucleobases in building block 1 engaging in different connectivities with the Pd entities, but also from the potential for the formation of oligomers of different sizes and different conformations; in the case of cyclic tetranuclear Pt(2)Pd(2) species, this can, in principle, lead to the various arrangements (cone, partial cone, 1,2-alternate, 1,3-alternate) known from calix[4]arene chemistry. A further complication arises from the fact that, depending on the mutual orientation of the exocyclic groups of the two nucleobases (O2 and O4 of uracil, O2 and N4 of cytosine), these sites can be engaged in additional chelation of [Pd(II)(en)] and [Pd(II)(2,2'-bpy)]. Thus, penta-, hexa-, and octanuclear complexes, Pt(2)Pd(3), Pt(2)Pd(4), and Pt(2)Pd(6), derived from cyclic Pt(2)Pd(2) tetramers have been isolated and characterized.     

Protonic and temperature modulation of constituent expression by component selection in a dynamic combinatorial library of imines

The constitutional recomposition of a dynamic library of imines displays a complex behavior under the effect of two parameters, acidity and temperature. A qualitative analysis of the quantitative data is presented. The results illustrate the response of such a dynamic system to a physical stimulus (temperature) and a chemical effector (H+), thus demonstrating its adaptive behavior under the pressure of external factors. They also point to the possibility of modulating a given functional property (optical, electronic, ionic) by constitutional recomposition induced by a specific trigger. Such features are of great interest for the development of stimuli-responsive, functional dynamic materials.     

Enzyme mimics based upon supramolecular coordination chemistry

Recent advances in supramolecular coordination chemistry have allowed chemists to synthesize macromolecular complexes that exhibit various properties intrinsic to enzymes. This Review focuses on structures inspired by properties and functions observed in enzymes rather than precise models of enzyme active sites. These structures are synthesized using convergent, modular, and high-yielding coordination-chemistry-based methods, which allow one to tailor the size, shape, and properties of the resulting complexes. Many of the structures discussed exhibit reactivity and specificity reminiscent of natural systems, and some of them have functions that exceed the natural systems which provided the inspiration for initially making them.     

A dynamic tricopper double helicate

The reaction between 8-aminoquinoline, 1,10-phenantholine-2,9-dicarbaldehyde, and copper(I) tetrafluoroborate gave a quantitative yield of a tricopper double helicate. The presence of dynamic covalent imine (C=N) bonds allowed this assembly to participate in two reactions not previously known in helicate chemistry: 1) It could be prepared through subcomponent substitution from a dicopper double helicate that contained aniline residues. An electron-poor aniline was quantitatively displaced; a more electron-rich aniline competed effectively with the aminoquinoline, setting up an equilibrium between dicopper and tricopper helicates that could be displaced towards the tricopper through the addition of further copper(I). 2) Both dicopper and tricopper helicates could be prepared simultaneously from a mixture of phenanthroline dialdehyde, aniline, and aminoquinoline, which contained all possible imine condensation products in equilibrium. Following the addition of copper(I), thermodynamic equilibration on both covalent and coordinative levels eliminated all partially-formed and mixed imine ligands from the mixture, leaving the helicates as exclusive products.     

Guest encapsulation and self-assembly of a cavitand-based coordination capsule

The synthesis and spectroscopic characterization of a cavitand-based coordination capsule 14 BF4 of nanometer dimensions is described. Encapsulation studies of large aromatic guests as well as aliphatic guests were performed by using 1H NMR spectroscopy in [D1]chloroform. In addition to the computational analysis of the shape and geometry of the capsule, an experimental approach to estimate the interior size of the cavity is discussed. The cavity provides a highly rigid binding space in which molecules with lengths of approximately 14 A can be selectively accommodated. The rigid cavity distinguished slight structural differences in the flexible alkyl-chain guests as well as the rigid aromatic guests. The detailed thermodynamic studies revealed that not only CH-pi interactions between the methyl groups on the guest termini and the aromatic cavity walls, but also desolvation of the inner cavity play a key role in the guest encapsulation. The cavity preferentially selected the hydrogen-bonded heterodimers of a mixture of two or three carboxylic acids 18-20. The chiral capsule encapsulated a chiral guest to show diastereoselection.     

Exploring the relation between amplification and binding in dynamic combinatorial libraries of macrocyclic synthetic receptors in water

Herein we describe an extensive study of the response of a set of closely related dynamic combinatorial libraries (DCLs) of macrocyclic receptors to the introduction of a focused range of guest molecules. We have determined the amplification of two sets of diastereomeric receptors induced by a series of neutral and cationic guests, including biologically relevant compounds such as acetylcholine and morphine. The host–guest binding affinities were investigated using isothermal titration calorimetry. The resulting dataset enabled a detailed analysis of the relationship between the amplification of selected receptors and host–guest Gibbs binding energies, giving insight into the factors affecting the design, simulation and interpretation of DCL experiments. In particular, two questions were addressed: Is amplification by a given guest selective for the best receptor? And does the best guest induce the largest amplification of a given receptor? Our experimental results and computer simulations showed that the relative levels of amplification of hosts by a guest are well‐correlated with their relative affinities, and simulations have confirmed previous observations that amplification can be selective for the best receptor when only modest amounts of guest are used. In contrast, the correlation between guest binding and the extent of amplification of a given receptor across a wide range of guests tends to be poorer, because every guest has its own unique set of affinities for competing receptors in the DCL. This implies that the results of screening a DCL for selective receptors by comparing the response of the mixture to two different guests should be interpreted with caution. DCLs are complex mixtures in which all compounds are connected through a set of equilibria. Obtaining quantitative information about all host–guest binding constants from such systems will require the explicit and simultaneous consideration of all of the main equilibria within a DCL.     

Grid-type metal ion architectures: functional metallosupramolecular arrays

Recent advances in supramolecular coordination chemistry allow access to transition-metal complexes of grid-type architecture comprising two-dimensional arrays of metal ions connecting a set of organic ligands in a perpendicular arrangement to generate a multiple wiring network. General design principles for these structures involve the thermodynamically driven synthesis of complex discrete objects from numerous molecular components in a single overall operation. Such supramolecular metal ion arrays combine the properties of their constituent metal ions and ligands, showing unique optical, electrochemical, and magnetic behavior. These features present potential relevance for nanotechnology, particularly in the area of supramolecular devices for information storage and processing. Thus, a dense organization of addressable units is represented by an extended "grid-of-grids" arrangement, formed by interaction of grid-type arrays with solid surfaces.     

Helicate extension as a route to molecular wires

We describe the preparation of a helicate containing four closely spaced, linearly arrayed copper(I) ions. This product may be prepared either directly by mixing copper(I) with a set of precursor amine and aldehyde subcomponents, or indirectly through the dimerization of a dicopper(I) helicate upon addition of 1,2-phenylenediamine. A notable feature of this helicate is that its length is not limited by the lengths of its precursor subcomponents: each of the two ligands wrapped around the four copper(I) centers contains one diamine, two dialdehyde, and two monoamine residues. This work thus paves the way for the preparation of longer oligo- and polymeric structures. DFT calculations and electrochemical measurements indicate a high degree of electronic delocalization among the metal ions forming the cores of the structures described herein, which may therefore be described as "molecular wires".     

Folding of coordination polymers into double-stranded helical organization

Self-assembling coordination polymers based on Pd II and Cu II metal ions were prepared from complexation of a bent-shaped bispyridine ligand and a corresponding transition metal. These coordination polymers were observed to self-assemble into supramolecular structures that differ significantly depending on the coordination geometry of the metal center. The polymer based on Pd II self-assembles into a layer structure formed by bridging bispyridine ligands connected in a trans-position of the square-planar coordination geometry of metal center. In contrast, the polymer based on Cu II adopts a double-helical conformation with regular grooves, driven by interstranded, copper-chloride dimeric interaction. The double-stranded helical organization is further confirmed by structure optimization from density functional theory with aromatic framework, showing that the optimized double-helical structure is energetically favorable and consistent with the experimental results. These results demonstrate that weak metal-ligand bridging interactions can provide a useful strategy to construct stable double-stranded helical nanotubes.     

Functional Molecular Flasks: New Properties and Reactions within Discrete,Self‐Assembled Hosts

Insider dealing : Self‐assembled hosts applied as “molecular flasks” can alter and control the reactivity and properties of molecules encapsulated within their well‐defined, confined spaces. A variety of functional hosts of differing sizes, shapes, and utility have been prepared by using the facile and modular concepts of self‐assembly.