Network flows with age dependent decay rates

This paper considers the problem of maximizing the output flow in a multicommodity network in which flow entering an arc experiences a decay rate which is a function of three factors: the arc, the commodity, and the age of the commodity as it enters the arc. An arc-chain linear programming formulation of the problem is given. The algorithm for solving the problem involves a novel column generation scheme for basis entry embedded in the revised simplex algorithm. An efficient algorithm for generating, at each iteration, such a column is provided and illustrated with a numerical example.     

A global optimization algorithm for reliable network design

In this paper, we consider the problem of designing reliable networks that satisfy supply/demand, flow balance, and capacity constraints, while simultaneously allocating certain resources to mitigate the arc failure probabilities in such a manner as to minimize the total cost of network design and resource allocation. The resulting model formulation is a nonconvex mixed-integer 0-1 program, for which a tight linear programming relaxation is derived using RLT-based variable substitution strategies and a polyhedral outer-approximation technique. This LP relaxation is subsequently embedded within a specialized branch-and-bound procedure, and the proposed approach is proven to converge to a global optimum. Various alternative partitioning strategies that could potentially be employed in the context of this branch-and-bound framework, while preserving the theoretical convergence property, are also explored. Computational results are reported for a hypothetical scenario based on different parameter inputs and alternative branching strategies. Related optimization models that conform to the same class of problems are also briefly presented.     

Heuristics for Distribution Network Design in Telecommunication

A distribution network problem arises in a lower level of an hierarchical modeling approach for telecommunication network planning. This paper describes a model and proposes a lagrangian heuristic for designing a distribution network. Our model is a complex extension of a capacitated single commodity network design problem. We are given a network containing a set of sources with maximum available supply, a set of sinks with required demands, and a set of transshipment points. We need to install adequate capacities on the arcs to route the required flow to each sink, that may be an intermediate or a terminal node of an arborescence. Capacity can only be installed in discrete levels, i.e., cables are available only in certain standard capacities. Economies of scale induce the use of a unique higher capacity cable instead of an equivalent set of lower capacity cables to cover the flow requirements of any link. A path from a source to a terminal node requires a lower flow in the measure that we are closer to the terminal node, since many nodes in the path may be intermediate sinks. On the other hand, the reduction of cable capacity levels across any path is inhibited by splicing costs. The objective is to minimize the total cost of the network, given by the sum of the arc capacity (cables) costs plus the splicing costs along the nodes. In addition to the limited supply and the node demand requirements, the model incorporates constraints on the number of cables installed on each edge and the maximum number of splices at each node. The model is a NP-hard combinatorial optimization problem because it is an extension of the Steiner problem in graphs. Moreover, the discrete levels of cable capacity and the need to consider splicing costs increase the complexity of the problem. We include some computational results of the lagrangian heuristics that works well in the practice of computer aided distribution network design.     

A capacity scaling heuristic for the multicommodity capacitated network design problem

In this paper, we propose a capacity scaling heuristic using a column generation and row generation technique to address the multicommodity capacitated network design problem. The capacity scaling heuristic is an approximate iterative solution method for capacitated network problems based on changing arc capacities, which depend on flow volumes on the arcs. By combining a column and row generation technique and a strong formulation including forcing constraints, this heuristic derives high quality results, and computational effort can be reduced considerably. The capacity scaling heuristic offers one of the best current results among approximate solution algorithms designed to address the multicommodity capacitated network design problem.     

一类神经网络模型的稳定性

本文将一种求解凸规划问题的神经网络模型推广到求解一般的非凸非线性规划问题．理论分析表明;在适当的条件下,本文提出的求解非凸非线性规划问题的神经网络模型的平衡点是渐近稳定的,对应于非线性规划问题的局部最优解     

A parametric algorithm for convex cost network flow and related problems

The convex cost network flow problem is to determine the minimum cost flow in a network when cost of flow over each arc is given by a piecewise linear convex function. In this paper, we develop a parametric algorithm for the convex cost network flow problem. We define the concept of optimum basis structure for the convex cost network flow problem. The optimum basis structure is then used to parametrize v, the flow to be transsshipped from source to sink. The resulting algorithm successively augments the flow on the shortest paths from source to sink which are implicitly enumerated by the algorithm. The algorithm is shown to be polynomially bounded. Computational results are presented to demonstrate the efficiency of the algorithm in solving large size problems. We also show how this algorithm can be used to (i) obtain the project cost curve of a CPM network with convex time-cost tradeoff functions; (ii) determine maximum flow in a network with concave gain functions; (iii) determine optimum capacity expansion of a network having convex arc capacity expansion costs.     

Optimizing cost flows by edge cost and capacity upgrade

We examine a network upgrade problem for cost flows. A budget can be distributed among the arcs of the network. An investment on each single arc can be used either to decrease the arc flow cost, or to increase the arc capacity, or both. The goal is to maximize the flow through the network while not exceeding bounds on the budget and on the total flow cost.

The problems are NP-hard even on series-parallel graphs. We provide an approximation algorithm on series-parallel graphs which, for arbitrary δ,>0, produces a solution which exceeds the bounds on the budget and the flow cost by factors of at most 1+δ and 1+, respectively, while the amount of flow is at least that of an optimum solution. The running time of the algorithm is polynomial in the input size and 1/(δ). In addition we give an approximation algorithm on general graphs applicable to problem instances with small arc capacities.     

A logistics problem: a non-markovian queueing network model and algorithm

In this paper, a stochastic version of the classical deterministic balanced single commodity capacitated transportation network problem is presented. In this model, each arc of the network connects a supply node to a demand node and the flow of units forming along each arc of the network forms a stochastic process (i.e.G/M/1 queueing system with generally distributed interarrival time, a Markovian server, a single server, infinite capacity, and the first come first served queueing discipline). In this model, the total transportation cost is minimized such that the total supply rate is equal to the total demand rate, and the resulting probability of finding excessive congestion along each arc (i.e., the resulting probability of finding congestion inside the queueing system formed along each arc in excess of a fixed number) is equal to a desirable value     

Determining the Optimal Flows in Zero-Time Dynamic Networks

Here we are dealing with minimum cost flow problem on dynamic network flows with zero transit times and a new arc capacity, horizon capacity, which denotes an upper bound on the total flow traversing through on an arc during a pre-specified time horizon T. We develop a simple approach based on mathematical modelling attributes to solve the min-cost dynamic network flow problem where arc capacities and costs are time varying, and horizon capacities are considered. The basis of the method is simple and relies on the appropriate defining of polyhedrons, and in contrast to the other usual algorithms that use the notion of time expanded network, this method runs directly on the original network.     

On single-path network routing subject to max-min fair flow allocation

Fair allocation of flows in multicommodity networks has been attracting a growing attention. In Max-Min Fair (MMF) flow allocation, not only the flow of the commodity with the smallest allocation is maximized but also, in turn, the second smallest, the third smallest, and so on. Since the MMF paradigm allows to approximate the TCP flow allocation when the routing paths are given and the flows are elastic, we address the network routing problem where, given a graph with arc capacities and a set of origin-destination pairs with unknown demands, we must route each commodity over a single path so as to maximize the throughput, subject to the constraint that the flows are allocated according to the MMF principle. After discussing two properties of the problem, we describe a column generation based heuristic and report some computational results.     

Parallel computing in nonconvex programming

In this paper, we are concerned with the development of parallel algorithms for solving some classes of nonconvex optimization problems. We present an introductory survey of parallel algorithms that have been used to solve structured problems (partially separable, and large-scale block structured problems), and algorithms based on parallel local searches for solving general nonconvex problems. Indefinite quadratic programming posynomial optimization, and the general global concave minimization problem can be solved using these approaches. In addition, for the minimum concave cost network flow problem, we are going to present new parallel search algorithms for large-scale problems. Computational results of an efficient implementation on a multi-transputer system will be presented.     

Polyhedral results for the edge capacity polytope

Network loading problems occur in the design of telecommunication networks, in many different settings. For instance, bifurcated or non-bifurcated routing (also called splittable and unsplittable) can be considered. In most settings, the same polyhedral structures return. A better understanding of these structures therefore can have a major impact on the tractability of polyhedral-guided solution methods. In this paper, we investigate the polytopes of the problem restricted to one arc/edge of the network (the undirected/directed edge capacity problem) for the non-bifurcated routing case.?As an example, one of the basic variants of network loading is described, including an integer linear programming formulation. As the edge capacity problems are relaxations of this network loading problem, their polytopes are intimately related. We give conditions under which the inequalities of the edge capacity polytopes define facets of the network loading polytope. We describe classes of strong valid inequalities for the edge capacity polytopes, and we derive conditions under which these constraints define facets. For the diverse classes the complexity of lifting projected variables is stated.?The derived inequalities are tested on (i) the edge capacity problem itself and (ii) the described variant of the network loading problem. The results show that the inequalities substantially reduce the number of nodes needed in a branch-and-cut approach. Moreover, they show the importance of the edge subproblem for solving network loading problems. Received: September 2000 / Accepted: October 2001?Published online March 27, 2002     

Constraint Generation for Network Reliability Problems

This paper presents a constraint generation approach to the network reliability problem of adding spare capacity at minimum cost that allows the traffic on a failed link to be rerouted to its destination. Any number of non-simultaneous link failures can be part of the requirements on the spare capacity. The key result is a necessary and sufficient condition for a multicommodity flow to exist, which is derived in the appendix. Computational results on large numbers of random networks are presented.     

The multi-terminal maximum-flow network-interdiction problem

This paper defines and studies the multi-terminal maximum-flow network-interdiction problem (MTNIP) in which a network user attempts to maximize flow in a network among K ? 3 pre-specified node groups while an interdictor uses limited resources to interdict network arcs to minimize this maximum flow. The paper proposes an exact (MTNIP-E) and an approximating model (MPNIM) to solve this NP-hard problem and presents computational results to compare the models. MTNIP-E is obtained by first formulating MTNIP as bi-level min-max program and then converting it into a mixed integer program where the flow is explicitly minimized. MPNIM is binary-integer program that does not minimize the flow directly. It partitions the node set into disjoint subsets such that each node group is in a different subset and minimizes the sum of the arc capacities crossing between different subsets. Computational results show that MPNIM can solve all instances in a few seconds while MTNIP-E cannot solve about one third of the problems in 24 hour. The optimal objective function values of both models are equal to each other for some problems while they differ from each other as much as 46.2% in the worst case. However, when the post-interdiction flow capacity incurred by the solution of MPNIM is computed and compared to the objective value of MTNIP-E, the largest difference is only 7.90% implying that MPNIM may be a very good approximation to MTNIP-E.     

A specialized network simplex algorithm for the constrained maximum flow problem

The constrained maximum flow problem is to send the maximum flow from a source to a sink in a directed capacitated network where each arc has a cost and the total cost of the flow cannot exceed a budget. This problem is similar to some variants of classical problems such as the constrained shortest path problem, constrained transportation problem, or constrained assignment problem, all of which have important applications in practice. The constrained maximum flow problem itself has important applications, such as in logistics, telecommunications and computer networks. In this research, we present an efficient specialized network simplex algorithm that significantly outperforms the two widely used LP solvers: CPLEX and lp_solve. We report CPU times of an average of 27 times faster than CPLEX (with its dual simplex algorithm), the closest competitor of our algorithm.     

网络最小覆盖流问题

网络流理论中最基本的模型是最大流及最小费用流问题. 为研 究堵塞现象, 文献中出现了最小饱和流问题, 但它是NP-难的. 研究类似的最小覆盖流问题, 即求一流, 使每一条弧的流量达到一定的额定量, 而流的值为最小. 主要结果是给出多项式时间算法, 并应用于最小饱和流问题.     

On Solving Quickest Time Problems in Time-Dependent, Dynamic Networks

In this paper, a pseudopolynomial time algorithm is presented for solving the integral time-dependent quickest flow problem (TDQFP) and its multiple source and sink counterparts: the time-dependent evacuation and quickest transshipment problems. A more widely known, though less general version, is the quickest flow problem (QFP). The QFP has historically been defined on a dynamic network, where time is divided into discrete units, flow moves through the network over time, travel times determine how long each unit of flow spends traversing an arc, and capacities restrict the rate of flow on an arc. The goal of the QFP is to determine the paths along which to send a given supply from a single source to a single sink such that the last unit of flow arrives at the sink in the minimum time. The main contribution of this paper is the time-dependent quickest flow (TDQFP) algorithm which solves the TDQFP, i.e. it solves the integral QFP, as defined above, on a time-dependent dynamic network, where the arc travel times, arc and node capacities, and supply at the source vary with time. Furthermore, this algorithm solves the time-dependent minimum time dynamic flow problem, whose objective is to determine the paths that lead to the minimum total time spent completing all shipments from source to sink. An optimal solution to the latter problem is guaranteed to be optimal for the TDQFP. By adding a small number of nodes and arcs to the existing network, we show how the algorithm can be used to solve both the time-dependent evacuation and the time-dependent quickest transshipment problems. This revised version was published online in August 2006 with corrections to the Cover Date.     

A three‐phase procedure for designing an irrigation system's water distribution network

This paper focuses on the design of an irrigation network included in a public project to build a distributing water system for agricultural purposes. We begin by outlining the issue. We then present a procedure composed of three sequential modules to tackle this complex problem. The first module provides the design of the network links by heuristically constructing a short length Steiner forest. In the second module, the flows for every arc of this network are calculated. The last one determines the size of the pipes and pumps by solving a mixed binary linear programming problem. A real experiment is reported. Although further improvements are required, the results confirm the adaptability of the overall procedure to assist agricultural engineers in preparing their projects.     

Maximum flow in a network with fuzzy arc capacities

Our main concern is the maximum flow in a network in which an excess over the beforehand fixed quota of arc capacity is admissible. The problem is represented as a partially fuzzy linear programming task. A theorem equivalent to the Ford and Fulkerson one concerning the classic task of maximum flow is proved in the paper. An algorithm for searching maximum flow assuming integer values of flows on network arcs is presented.