Adsorption of polyethylene glycol (PEG) from aqueous solution onto hydrophobic zeolite

In the present study, a hydrophobic zeolite was used as an adsorbent for the adsorption of polyethylene glycol (PEG) in water solution and electroplating solution at 25 degrees C. The adsorption capacities were determined through the adsorption isotherms in a thermostated shaker. The rate of adsorption, on the other hand, was investigated in a batch adsorber under controlled process parameters such as initial PEG concentration (30, 70, 110, 150, 200, and 300 mg x dm(-3)), agitation speed (200, 800, and 1000 rpm), and adsorbent particle size (0.72, 1.44, and 2.03 mm). A batch kinetic model, according to a pseudo-second-order mechanism, has been tested to predict the rate constant of adsorption, equilibrium adsorption capacity, time of half-adsorption, and equilibrium concentration by the fitting of the experimental data. The results of the adsorption isotherm and kinetic studies show that the adsorption process can well be described with the Langmuir and Freundlich models and the pseudo-second-order equation, respectively. Comparing the values of adsorption parameters of PEG in water solution and electroplating solution, there are no significant differences. In addition, the effective diffusion coefficient of the PEG molecule in the microporous adsorbent has been estimated at about 3.20 x 10(-8) cm(2)s(-1) based on the restrictive diffusion model.     

Adsorption behavior of Pd(II) ions from aqueous solution onto pyromellitic acid modified-UiO-66-NH2

A new adsorbent was successfully fabricated by chemically linking pyromellitic acid onto a zirconium-based metal-organic framework composite for selective adsorption of Pd(II) from an aqueous solution. The adsorbent was characterized by Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller equation and scanning electron microscope. The adsorption capacity, selectivity and repeatability of the adsorbent were tested by batch experiments. The optimum pH was 2.0, and the maximum adsorption capacity at room temperature was 226.1 mg/g. In the kinetic experiments, the adsorption process achieved equilibrium within 5 h and generally conformed to the quasi-second kinetics and Freundlich isotherm model. The N-H and OH groups on the adsorbent interacted with Pd(II) by electrostatic and coordination action. The adsorbent maintained excellent adsorption capacity after at least 5 cycles. At the same time, the selectivity of the adsorbent in aqueous solution is excellent from interfering ions. Therefore, the new adsorbent will have an obvious application prospect on the recovery of palladium.     

Adsorption of heavy-metal ions from aqueous solution onto chitosan-modified polyethylene terephthalate (PET)

Research on Chemical Intermediates - A novel chitosan-modified polyethylene terephthalate (PET) composite (CCP) adsorbent was specifically fabricated using a dip-padding method for removal of toxic...     

Adsorption of basic dyes from aqueous solution onto pumice powder

The adsorption of methylene blue and crystal violet on pumice powder samples of varying compositions was investigated using a batch adsorption technique. The effects of various experimental parameters, such as adsorbent dosage, initial dye concentration, and contact time, were also investigated. The extent of dye removal increased with decreased initial concentration of the dye and also increased with increased contact time and amount of adsorbent used. Adsorption data were modeled using the Freundlich adsorption isotherm. The adsorption kinetic of methylene blue and crystal violet could be described by the pseudo-second-order reaction model.     

Phase transition of aqueous solutions of poly(N,N-diethylacrylamide-co-acrylic acid) by differential scanning calorimetric and spectrophotometric methods

 The phase transition of aqueous solutions of poly(N,N-diethylacrylamide-co-acrylic acid) (DEAAm–AA) is studied by differential scanning calorimetry (DSC) and UV–vis spectrophotometry. The copolymer aqueous solutions are shown to have well-defined lower critical solution temperatures (LCSTs). The LCST values obtained from the maximum of the first derivatives of the DSC and optical transition curves agree well. DSC can be used to measure the phase-transition temperature of more dilute polymer solutions. On increasing the AA composition in the copolymers, the LCST values of the copolymer increase, then decrease at higher AA composition. For the aqueous solution of the copolymers, the transition curve obtained by the spectrophotometric method is highly wavelength dependent. The LCST values are found to be concentration-dependent. The changes in the heat of the phase transition of the copolymer solutions measured from DSC are lower than that of the homopolymer PDEAAm solution. This is consistent with the suggestion that the polymer chains of the copolymers collapsed only partially at temperatures above the LCST. The added salt (sodium chloride) decreases the transition temperature of the polymer solution. Received: 14 November 2000 Accepted: 15 January 2001     

Adsorption of UO2 2+ on poly(N,N-diethylacrylamide-co-acrylic acid): effects of pH, ionic strength, initial uranyl concentration, and temperature

We prepared poly(N,N-diethylacrylamide-co-acrylic acid) (P(DEA-co-AA)) microgels which could efficiently remove UO₂ ²⁺ from aqueous solutions. In this study, the effect of adsorption parameters such as pH value, adsorbent dose, shaking time, and temperature has investigated. It is found that the pseudo-second-order model is more suitable for our experiment. The adsorption kinetic data indicated that the chemical adsorption was the swiftness processes, the adsorption equilibrium could be achieved within 30 min. And there are very good correlation coefficients of linearized equations for Langmuir isotherm model, which indicated that the sorption isotherm of the hydrogel for UO₂ ²⁺ can be fitted to the Langmuir isotherm model. The adsorption process was spontaneous (?G ⁰ < 0) and exothermic (?H ⁰ < 0). The adsorbed UO₂ ²⁺ can be desorbed effectively by 0.1 M HNO₃ and the adsorption capacity is not significantly reduced after five cycles. Present study suggests that this P(DEA-co-AA) can be used as a potential adsorbent for sorption UO₂ ²⁺ and also provide a simple, fast separation method for removal of UO₂ ²⁺ ions from aqueous solution.     

Adsorption of Congo red from aqueous solution onto calcium-rich fly ash

The adsorption of Congo red from solution was carried out using calcium-rich fly ash with different contact times, concentrations, temperatures, and pHs. While the amount of dye adsorbed per unit weight of fly ash increases with increasing concentration and temperature, it decreases slightly with increasing pH. The adsorption was between 93 and 98% under the conditions studied. Kinetic studies showed that the adsorption process obeyed the pseudo-second-order kinetic model. It was also determined that the adsorption isotherm followed Freundlich and Dubinin-Radushkevich models. From thermodynamic studies, it was seen that the adsorption was spontaneous and endothermic. Desorption studies suggested that desorption was 29.18% in the presence of 0.1 N HCl and was 47.21% in the presence of CH(3)COOH (50% v/v). This indicated that most of the dye was held by fly ash via chemisorption as well as ion exchange. Furthermore, FTIR study also shows that a chemisorption process occurs between CR and fly ash, probably indicating dye/fly ash complexing.     

Adsorption of UO2 2+ from aqueous solution onto copolymers of styrene and maleic anhydride

The copolymers of styrene and maleic anhydride resin (PSt/MA) was synthesized by free radical polymerization and characterized by means of FTIR. It is shown that the PSt/MA copolymer has rather strong coordination ability to UO₂ ²⁺ ions by chelation with the carboxylate group, and the microstructures of the U(VI)-PSt/MA complexes can be well controlled. The influence factors on UO₂ ²⁺ ions were also investigated and described in detail, such as contact time, solid/liquid ratio, pH value, ethanol content, and initial concentration. It was found that the maximum adsorption quantity of UO₂ ²⁺ was 831 mg/g. Experiments show that PSt/MA can recover UO₂ ²⁺ ions with high adsorption selectively from a simulated industry solution containing Ca²⁺ and Mg²⁺ as impurities. The adsorption kinetic data were best described by the pseudo-second-order equation, indicating that the chemical adsorption was the rate-limiting step. And there are very good correlation coefficients of linearized equations for Langmuir model, which indicated that the sorption isotherm of the PSt/MA for UO₂ ²⁺ can be fitted to the Langmuir model. After five times of repeated tests for the hydrogel it still remained its excellent adsorption.     

Adsorption of acid dyes from aqueous solutions onto acid-activated bentonite

The adsorption of two dyes, namely, Acid Red 57 (AR57) and Acid Blue 294 (AB294), onto acid-activated bentonite in aqueous solution was studied in a batch system with respect to contact time, pH, and temperature. Acidic pH was favorable for the adsorption of these dyes. The surface characterization of acid-activated bentonite was performed using the FTIR technique. The pseudo-first-order and pseudo-second-order kinetic models and the intraparticle diffusion model were used to describe the kinetic data and the rate constants were evaluated. The dynamic data fitted the pseudo-second-order kinetic model well and also followed the intraparticle diffusion model up to 90 min, but diffusion is not the only rate controlling step. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The Freundlich model agrees very well with experimental data. The activation energies of adsorption were also evaluated for the adsorption of AR57 and AB294 onto activated bentonite.     

Adsorption of strontium (II) ions from aqueous solution onto bottom ash of expired drug incineration

Journal of Radioanalytical and Nuclear Chemistry - Bottom Ash of Expired Drug Incineration (BAEDI) is used in this study for the removal of Sr(II). In the kinetic study, the experimental results...     

Adsorption of valeric acid from aqueous solution onto activated carbons: role of surface basic sites

Adsorption of valeric acid was studied on two activated carbons of different origins, wood and bituminous coal. The effect of oxidation on the adsorption uptake was investigated. Both initial samples were oxidized with nitric acid, which caused the introduction of a significant number of oxygen-containing groups onto the carbon surface. Boehm titration, potentiometric titration, thermal analysis, and sorption of nitrogen were used for detailed surface characterization. Valeric acid adsorption from aqueous solution was measured at 333 K. The calculated isotherms showed a good fitting to the Freundlich equation. The capacity coefficients revealed a direct correlation with the number of basic groups present on the surface. The amount of valeric acid adsorbed at its low concentration is dependent on the number of basic groups, whereas at high concentration the amount adsorbed depends on the volume of micropores smaller than 10 A, where the adsorption potential is the strongest.     

Adsorption of phenylalanine from aqueous solution onto active carbon and silica gel

The adsorption isotherms of phenylalanine from aqueous solution on active carbon andsilica gel at varying pH,and the influence of inorganic salt upon the ad rption have been studied(at 25℃).The adsorption amount of phcnylalanine on the silica gel is very low due to the strong ad-sorption of water by silica gel.The results on the active carbon show:(1)The adsorption is found to bepH-dependent,within pH 4.1—5.1 it increases with pH,within pH 5.1—11.8 it decreases with pH,atpH 5.1 the adsorption reaches its maximum;(2)The phenylalanine is adsorbed mainly in the formof zwitterion;(3)A certain amount of cations and anions of phenylalanine are also adsorbed with vander Waals interaction;(4)After adding NaCl,the adsorption of phenylalanine increases markedly.     

Adsorption of phenol from aqueous solution onto zeolites Y modified by silylation

The present work consists in studying the adsorption of phenol onto zeolites Y modified by silylation, in order to increase their hydrophobic character. The operation was carried out by chemical liquid deposition with trimethylchlorosilane (TMCS). Study of the effect of certain parameters like initial concentration, pH and ionic strength were conducted. Experimental data were fitted by the models of Langmuir, Freundlich and Dubinin-Raduskevich calculated by non-linear regression. Results obtained show that the adsorption of phenol on samples is very fast and supported at acidic values of pH. We also found that phenol uptake increases with Si/Al ratio and modification by silylation improves the percentage of adsorption by approximately 30%.     

Adsorption of Th(IV) from aqueous solution by the graphene oxide nanoribbons/chitosan composite material

Journal of Radioanalytical and Nuclear Chemistry - In order to reduce the potential toxicity to the environment after treatment of radioactive waste water, an eco-friendly graphene oxide...     

Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.     

Adsorption of uranium (VI) from aqueous solution by tetraphenylimidodiphosphinate

The adsorption of uranium (VI) using tetraphenylimidodiphosphinate (Htpip) was studied. Factors of affecting sorption efficiency have been investigated and results showed the adsorption of uranium (VI) was equilibrium at pH 4.5, time 20 min, adsorbent dosage 0.005 g and initial concentration 50 mg L^?1 reaching 99.86 mg g^?1 of adsorption capacity and 99.86% of removal efficiency. Additionally, the interfering ions studies showed that the adsorbent possessed excellent adsorption selectivity of uranium (VI). The surface morphology of Htpip was investigated by SEM. The adsorption process of uranium (VI) onto Htpip fit the pseudo-second-order kinetic model and the Freundlich isotherm model very well.     

Synthesis and characterization of Poly(N-isopropylacrylamide)/Poly(acrylic acid) semi-IPN nanocomposite microgels

A novel pH- and temperature-sensitive nanocomposite microgel based on linear Poly(acrylic acid) (PAAc) and Poly(N-isopropylacrylamide) (PNIPA) crosslinked by inorganic clay was synthesized by a two-step method. First, PNIPA microgel was prepared via surfactant-free emulsion polymerization by using inorganic clay as a crosslinker, and then AAc monomer was polymerized within the PNIPA microgel. The structure and morphology of the microgel were confirmed by FTIR, WXRD and TEM. The results indicated that the exfoliated clay platelets were dispersed homogeneously in the PNIPA microgels and acted as a multifunctional crosslinker, while the linear PAAc polymer chains incorporated in the PNIPA microgel network to form a semi-interpenetrating polymer network (semi-IPN) structure. The hydrodynamic diameters of the semi-IPN microgels ranged from 360 to 400 nm, which was much smaller than that of the conventional microgel prepared by using N,N′-methylenebis(acrylamide) (MBA) as a chemical crosslinker, the later was about 740 nm. The semi-IPN microgels exhibited good pH- and temperature-sensitivity, which could respond independently to both pH and temperature changes.     

Adsorption equilibrium and heat of phenol onto aminated polymeric resins from aqueous solution

Aminated polystyrene resins (NDA-101 and NDA-103) were synthesized, and their adsorption performances for phenol in aqueous solution were investigated and compared with the commercial polystyrene resin (Amberlite XAD-4) and weakly basic polystyrene resin (Amberlite IRA-96). All the associated adsorption isotherms are well described by Freundlich and Langmuir equations. The results indicated that all the four resins spontaneously adsorb phenol driven mainly by enthalpy change, and their adsorption capacities, free energy changes, enthalpy changes, and entropy changes for phenol followed the same order as: NDA-101 > NDA-103 > XAD-4 > IRA-96. Surface energy heterogeneity analysis by Do's model also suggested that the surfaces of XAD-4 and IRA-96 were more homogeneous, and the better adsorption capacity and affinity of the aminated resins (NDA-101 and NDA-103) are probably due to their multiple hydrogen bonding and π–π stacking interactions with phenol molecule.     

生物质竹炭对水中Cd~(2+)的吸附行为研究

以竹炭和经化学改性竹炭作为吸附剂,研究其对水溶液中Cd2+的吸附特性,探讨了竹炭对Cd2+的吸附热力学和吸附动力学性质,通过单因子优化实验探讨了温度、竹炭投加量和p H值对吸附效果的影响。结果表明:竹炭及改性竹炭对Cd2+的吸附动力学过程符合准二级动力学模型,在18h可达到平衡;其等温吸附曲线符合Langmuir方程,最大吸附量分别为10.18mg/g和16.71mg/g;两者对Cd2+的吸附受温度的影响较小;竹炭及改性竹炭的最佳投加量分别为0.8g、0.6g;p H对竹炭及改性竹炭吸附Cd2+的影响较大,在p H 2~6范围时,竹炭及改性竹炭对Cd2+的吸附量随p H的增加而增加。