Spectrophotometric determination of three anti-ulcer drugs through charge-transfer complexation

A simple charge-transfer complexation method is described for the spectrophotometric assay of nizatidine, ranitidine, and famotidine. This method is based on interaction of these drugs, as n-electron donors, with 7,7,8,8-tetracyanoquinodimethane, as the pi-acceptor, in acetonitrile to give highly colored green radical anions that are measured at 840 nm. Calibration graphs for the 3 compounds are linear over the concentration ranges of 1-6 microg/mL for nizatidine and ranitidine and 1-7 microg/mL for famotidine, with correlation coefficients (n = 6) of >0.999. The conditioned stability constants and the free energy changes were measured; the values obtained were generally high and negative, respectively, suggesting highly stable complexes. The proposed method was successfully applied to the determination of the drugs in pharmaceutical preparations. The assay results were in accordance with those obtained by using reference methods.     

Head-column field-amplified sample stacking in capillary electrophoresis for the determination of cimetidine, famotidine, nizatidine, and ranitidine-HCl in plasma.

In this study, low concentrations of histamine2-receptor (H2-)antagonists were effected across a water plug, with separation taking place in a binary buffer comprising ethylene glycol and NaH2PO4 (pH 5.0), and detection at 214 nm. Liquid-liquid extraction with ethyl acetate- isopropanol is shown to provide extracts that are sufficiently clean. The calibration curves were linear over a concentration range of 0.1-2.00 microg/mL cimetidine, 0.2-5.0 microg/mL ranitidine-HCl, 0.3-5.0 microg/mL nizatidine, and 0.1-3.0 microg/mL famotidine. Mean recoveries were > 82%, while the intra- and interday relative standard deviations (RSDs) and relative errors (REs) were all < 13%. The method is sensitive with a detection limit of 3 ng/mL cimetidine, 30 ng/mL ranitidine HCl, 50 ng/mL nizatidine and 10 ng/mL famotidine (S/N = 3, electric-driven injection 90 s). This newly developed capillary electrophoresis (CE) method was applied for the determination of analytes extracted from plasma taken from a volunteer dosing a cimetidine, ranitidine, and nizatidine tablet simultaneously. These three H2-antagonists can be detected in real samples by this method, excluding the low dosing of famotidine tablet.     

Voltammetric determination of benazepril and ramipril in dosage forms and biological fluids through nitrosation

A simple and highly sensitive voltammetric method was developed for the determination of benazepril (I) and ramipril (II). The compounds were treated with nitrous acid, and the cathodic current produced by the resulting nitroso derivatives was measured. The voltammetric behavior was studied by adopting direct current (DCt), differential pulse (DPP), and alternating current (ACt) polarography. Both compounds produced well-defined, diffusion-controlled cathodic waves over the whole pH range in Britton-Robinson buffers (BRb). At pH 3 and 5, the values of diffusion-current constants (Id), were 5.90 +/- 0.40 and 6.66 +/- 0.61 for I and II, respectively. The current concentration plots for I were rectilinear over the range of 1.5-40 and 0.1-30 microg/mL in the DCt and DPP modes, respectively; for II, the range was 2-30 and 0.1-20 microg/mL in the DCt and DPP modes, respectively. The minimum detectabilities (S/N = 2) were 0.015 microg/mL (about 3.25 x 10(-8)M) and 0.012 microg/mL (about 2.88 x 10(-8)M) for I and II, respectively, adopting the DPP mode. Results obtained for the proposed method when applied to the determination of both compounds in dosage forms were in good agreement with those obtained using reference methods. Hydrochlorthiazide, which is frequently co-formulated with these drugs, did not interfere with the assay. The method was also applied to the determination of benazepril in spiked human urine and plasma. The percentage recoveries adopting the DPP mode were 96.2 +/- 1.21 and 95.7 +/- 1.61, respectively.     

Spectrofluorimetric determination of vigabatrin and gabapentin in dosage forms and spiked plasma samples through derivatization with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole

A highly sensitive and specific method is proposed for the determination of vigabatrin (I) and gabapentin (II) in their dosage forms and spiked human plasma. The method is based on coupling the drugs with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole in borate buffer at pH 7.1 and measuring the resulting fluorescence at 532 nm after excitation at 465 nm. The fluorescence intensity was a linear function of the concentration of the drugs over the ranges of 1.3-6.5 and 1.7-8.5 microg/mL for I and II, respectively. Minimum detectability values were 0.54 microg/mL (4.2 x 10(-6)M) and 0.97 microg/mL (5.7 x 10(-6)M) for I and II, respectively, under the described conditions. The proposed method was successfully applied to the determination of the 2 drugs in their dosage forms, and the percent recoveries +/- standard deviation (SD) were 104.53 +/- 1.2 and 100.00 +/- 1.32 of the label claim for I and II, respectively. The method was further applied to the determination of vigabatrin in spiked plasma samples. The percent recovery +/- SD was 101.58 +/- 2.68. Interference from endogenous alpha-amino acids was overcome through selective complexation with freshly prepared Cu(OH)2. The interference likely to be encountered from co-administered drugs, such as carbamazepine, cimetidine, clonazepam, clopazam, phenobarbital, valproic acid, and lamotrigine, was also studied. A reaction pathway is suggested.     

Spectrophotometric determination of acyclovir and ribavirin in their dosage forms

Two simple, accurate, and reliable spectrophotometric methods have been developed for the determination of 2 antiviral drugs, acyclovir (ACV) and ribavirin (RBV), in their pharmaceutical formulations. These methods are based on oxidation of the 2 drugs with either cerium (IV) ammonium sulfate (Method A) or potassium persulfate (Method B). The products of oxidation in both methods are coupled with 3-methylbenzothiazolin 2-one hydrazone, producing a deep blue color with a maximum absorption wavelength at 630 nm. In Method A, the absorbance-concentration plots were linear over the ranges of 5-50 and 10-60 microg/mL with detection limits of 0.18 microg/mL (8 x 10(-7) M) and 0.63 microg/mL (2.58 x 10(-6) M) for ACV and RBV, respectively. In Method B, the ranges were 5-45 and 20-50 microg/mL with detection limits of 0.11 microg/mL (4.88 x 10(-7) M) and 1.40 microg/mL (5.73 x 10(-6) M) for the 2 drugs, respectively. The molar absorptivities were 4.1 x 10(3) and 3.65 x 10(3) L/mol/cm in Method A and 5.03 x 10(3) and 3.97 x 10(3) L/mol/cm in Method B for the 2 drugs, respectively. The proposed methods were applied successfully for the determination of the 2 drugs in their pharmaceutical formulations. The percentage recoveries +/- standard deviation were 99.57 +/- 0.86 and 100.82 +/- 0.46 for ACV; 99.41 +/- 1.08 and 100.35 +/- 1.03 for RBV. The results obtained were compared statistically with those given by official methods and showed no significant differences regarding accuracy and precision.     

Highly sensitive spectrophotometric methods for the determination, validation and thermogravimetric analysis of antiulcer drugs, nizatidine and ranitidine in pure and pharmaceutical preparations

Two sensitive, simple and rapid UV and second order derivative spectrophotometric methods were developed for the determination of nizatidine and ranitidine hydrochloride in pure form and pharmaceutical preparations. For the first method, UV spectrophotometic method, nizatidine was determined at 325 nm and ranitidine at 325.5 nm with detection limits of 0.07 and 0.04 μg/mL, respectively. For the second method, the distances between two extremum values (peak-to-peak amplitudes), 328/356.5 nm for nizatidine and 326/357 nm for ranitidine were measured in the second order derivative-spectra. The detection limits were found to be 0.02 μg/mL for nizatidine and 0.016 μg/mL for ranitidine, respectively. The thermal analysis of the two drugs was studied by Thermogravimetric Analysis-Differential Scanning Calorimetry (TGA-DSC) techniques. Enthalpy changes were obtained 121.9 and 124.15 J/g for nizatidine and ranitidine, respectively. The proposed method was successfully applied to the analysis of pharmaceutical preparations. The results were in good agreement with those obtained using the reference method; no significant difference were found in the accuracy and precision as revealed by the accepted values of t- and F-tests.     

Spectrofluorometric determination of fluvoxamine in dosage forms, spiked plasma, and real human plasma by derivatization with fluorescamine

A sensitive, simple, and selective spectrofluorometric method was developed for the determination of fluvoxamine (FXM) in pharmaceutical formulations and biological fluids. The method is based upon the reaction between the drug and fluorescamine in borate buffer of pH 8.0 to yield a highly fluorescent derivative that is measured at 481 nm after excitation at 383 nm. The different experimental parameters affecting the development and stability of the reaction product were carefully studied and optimized. The method was applied for the determination of the drug over the concentration range of 0.1-1.1 microg/mL with a detection limit of 0.01 microg/mL (2 x 10(-8) M). The proposed method was successfully applied to the analysis of commercial tablets. The results obtained were in good agreement with those obtained using a reported spectrophotometric method. The method was applied for the determination of FXM in spiked human plasma with recovery (n=4) of 97.32 +/- 1.23%, while that in real human plasma (n=3) was 90.79 +/- 2.73%. A proposal for the reaction pathway is presented.     

Spectrophotometric determination of four macrolide antibiotics in pharmaceutical formulations and biological fluids via binary complex formation with eosin [corrected

A simple, rapid, and sensitive validated spectrophotometric method was developed for the determination of certain macrolide antibiotics namely, erythromycin (I), azithromycin dihydrate (II), clarithromycin (III), and roxithromycin (IV) in bulk powders, pharmaceutical formulations, and spiked biological fluids. The proposed method is based on the formation of a binary complex between each of the studied drugs and eosin Y in aqueous buffered medium. Under the optimum conditions, the binary complexes showed absorption maxima at 542-544 nm. The absorbance of the binary complexes obeyed Beer's law over the concentration range of 1-10 micro/g/mL for II, 2-20 microg/mL for I and IV, and 3-30 microg/mL for III. The mean percentage recoveries were 100.04 +/- 0.83, 99.98 +/- 0.80, 100.17 +/- 0.91, and 99.55 +/- 0.91, with minimum detectable molarities of 2 x 10(-7) for I and II, 4 x 10(-7) for III, and 3 x 10(-7) for IV. The different experimental parameters affecting the development and stability of the colors were studied and optimized. The proposed method was successfully applied to the analysis of the cited drugs in some pharmaceutical formulations. The results obtained were in good agreement with those obtained using the reference methods. The proposed method was further applied to spiked human urine and plasma. A proposal of the reaction pathway is suggested.     

Kinetic spectrophotometric determination of josamycin in formulations and spiked human plasma using 3-methylbenzothiazolin-2-one hydrazone/Fe+3 system

A simple kinetic spectrophotometric method was developed for the determination of josamycin in its dosage forms and spiked human plasma. The method is based on reaction of the drug with 3-methylbenzothiazolin-2-one hydrazone/ferric chloride system for a fixed time of 20 min at 70 degrees C and measuring the produced color at 665 nm. The absorbance-concentration plot is rectilinear over the range of 5.0-30.0 microg/mL with detection limit of 1.0 microg/mL (1.2 x 10(-6) M). The determination of josamycin by the fixed concentration and the rate-constant methods is also feasible with the calibration equations obtained, but the fixed-time method proved to be more applicable. The procedure was successfully applied to commercial tablets. The results obtained were favorably compared with those given by reference methods. The method was further extended to the in vitro determination of josamycin in spiked human plasma. The recovery (n = 8) was 100.76 +/- 3.43%. The stoichiometry of the reaction between the drug and the reagent was studied by adopting the limiting logarithmic method, and a proposal of the reaction pathway was presented.     

Determination of ranitidine, nizatidine, and cimetidine by a sensitive fluorescent probe

A validated, simple, and sensitive fluorescence quenching method for the determination of ranitidine, nizatidine, and cimetidine in tablets and biological fluids is presented. This is the first single fluorescence method reported for the analysis of all three H(2) antagonists. The competitive reaction between the investigated drug and the palmatine probe for the occupancy of the cucurbit[7]uril (CB[7]) cavity was studied using spectrofluorometry. CB[7] was found to react with the probe to form a stable complex. The fluorescence intensity of the complex was also enhanced greatly. However, the addition of the drug dramatically quenched the fluorescence intensity of the complex. Accordingly, a new fluorescence quenching method for the determination of the studied drugs was established. The different experimental parameters affecting the fluorescence quenching intensity were studied carefully. At optimum reaction conditions, the rectilinear calibration graphs between the fluorescence quenching values (ΔF) and the medicament concentration were obtained in the concentration range of 0.04-1.9 μg mL(-1) for the investigated drugs. The limits of detection ranged from 0.013 to 0.030 μg mL(-1) at 495 nm using an excitation wavelength of 343 nm. The proposed method can be used for the determination of the three H(2) antagonists in raw materials, dosage forms and biological fluids.     

A rapid spectrophotometric method for the determination of molybdenum in industrial, environmental, biological and soil samples using 5,7-dibromo-8-hydroxyquinoline.

A very simple, ultra-sensitive and highly selective non-extractive spectrophotometric method for the determination of trace amount of molybdenum(VI) using 5,7-dibromo-8-hydroxyquinoline (DBHQ) has been developed. 5,7-Dibromo-8-hydroxyquinoline reacts in a slightly acidic solution (0.05 - 1.0 M H2SO4) with molybdenum(VI) to give a deep greenish-yellow chelate which has an absorption maximum at 401 nm. The reaction is instantaneous and the absorbance remains stable for over 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 4.13 x 10(3) L mol(-1) cm(-1) and 7 ng cm(-2) of molybdenum(VI), respectively. Linear calibration graphs were obtained for 0.1 - 50 microg mL(-1) of molybdenum(VI). The stoichiometric composition of the chelate is 1:3 (Mo:DBHQ). A large excess of over 50 cations, anions and some common complexing agents (e.g. EDTA, oxalate, citrate, phosphate, thiourea, SCN-) do not interfere with the determination. The method was successfully used in the determination of molybdenum in several Standard Reference Materials (alloys, steels and waters) as well as in some environmental waters (inland and surface), biological samples (human blood and urine), soil samples, solution containing both molybdenum(V) and molybdenum(VI) and complex synthetic mixtures. The method has high precision and accuracy (S = +/-0.01 for 0.5 microg mL(-1)).     

Kinetic spectrophotometric determination of the macrolide antibiotic josamycin in formulations

A simple kinetic spectrophotometric method was developed for the determination of josamycin in its dosage forms. The method is based on oxidation of the drug with alkaline potassium permanganate at room temperature for a fixed time of 20 min and measuring the produced green color at 611 nm. The absorbance-concentration plot is rectilinear over the range of 2-10 microg/mL (2.4 x 10(6)-1.2 x 10(-5)M) with minimum detectability of 1.0 microg/mL (1.2 x 10(-6)M). The determination of josamycin by fixed concentration and the rate-constant methods is also feasible with the calibration equations obtained, but the fixed-time method proved to be more applicable. The procedure was applied successfully to commercial tablets, and statistical analysis showed that the results compared favorably with those obtained by reference methods. The effect of sensitizers and surfactants on the performance of the proposed method was also studied. A proposal of the reaction pathway was presented.     

Spectrofluorimetric and spectrophotometric determination of gliclazide in pharmaceuticals by derivatization with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole

Accurate, sensitive, and simple spectrophotometric and spectrofluorimetric methods were developed for the determination of gliclazide in pharmaceutical formulations and biological fluids. Both methods are based on a coupling reaction between gliclazide and 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole in borate buffer, pH 7.8, in which a yellow reaction product that can be measured spectrophotometrically at 400 nm was developed. The same product exhibited a yellow fluorescence at 470 nm upon excitation at 400 nm. The absorbance-concentration plot was rectilinear over the range of 2-20 microg/mL with minimum detectability [signal-to-noise (S/N) ratio = 2] of 0.2 microg/mL (6.18 x 10(-7) M); the fluorescence-concentration plot was rectilinear over the range of 0.2-2.5 microg/mL with minimum detectability (S/N = 2) of 0.02 microg/mL (6.18 x 10(-8) M). The different experimental parameters affecting the development and stability of the color were carefully studied and optimized. Both methods were successfully applied to the analysis of commercial tablets. The results were in good agreement with those obtained with the official and reference spectrophotometric methods. A proposal of the reaction pathway was presented.     

Development and validation of a micellar high-performance liquid chromatographic method for determination of risedronate in raw material and in a pharmaceutical formulation: application to stability studies

A micellar HPLC method was developed for analysis of the antiosteoporosis drug risedronate. The analysis was carried out using a 250 x 4.6 mm id, 5 microm particle size C18 Waters Symmetry column. The mobile phase consisted of 0.02 M sodium dodecyl sulfate + 0.3% triethylamine + 10% n-propanol, prepared in 0.02 M orthophosphoric acid. The pH of the mobile phase was adjusted to pH 6.0, and it was pumped at a flow rate of 0.7 mL/min with UV detection at 262 nm. The method showed good linearity in the range of 2-80 microg/mL, with an LOD of 0.40 microg/mL (1.31 x 10(-6) M) and an LOQ of 1.21 microg/mL. The suggested method was successfully applied for the analysis of risedronate in raw material and a tablet formulation, with average recoveries of 99.91 +/- 1.30 and 101.52 +/- 0.30%, respectively. The stability-indicating capability of the proposed method was proved using forced degradation. By changing the pH of the mobile phase to 4.0, the oxidative degradation product could be separated from risedronate.     

Determination of nizatidine and two of its main metabolites in human serum using high-performance liquid chromatography

A high-performance liquid chromatographic assay has been developed for the determination of nizatidine, a new histamine H2-receptor antagonist, and two of its main metabolites, N-desmethylnizatidine and nizatidine sulphoxide. Drugs were extracted with chloroform-2-propanol (90:10, v/v) from alkalinized samples of serum, using ranitidine as an internal standard. After evaporation of the extraction solvent, the residue was removed and analysed on a LiChrosorb Si60 5-microns column with a mobile phase of acetonitrile-methanol-water-ammonia solution (1000:200:20:5, v/v). The compounds were detected at 320 nm. The lower detection limits were 6-18 ng/ml at a signal-to-noise ratio of 3. This method is simple and specific, and the single-step extraction makes it rapid. It is the first high-performance liquid chromatographic assay to be described for the determination of nizatidine metabolites.     

Highly selective and sensitive reaction of cyanide with 2,2-dihydroxy-1,3-indanedione

A novel reaction of cyanide with 2,2-dihydroxy-1,3-indanedione in the presence of sodium carbonate is described. It is highly selective and sensitive, and suitable for the determination of hydrogen cyanide in the environment and free cyanide ions in water, blood, urine, serum, etc. As little as 1.25x10(-7) mol x L(-1) CN(-) (3.25x10(-9) g x mL(-1) cyanide) can be determined by use of this reaction. The color system obeys Beer's law in the range 10 ng x mL(-1) to 1.0 microg x mL(-1) at 510 nm. The molar absorptivity was 8.0x10(4) L x mol(-1) x cm(-1) for a solution of concentration 0.2 microg x mL(-1). All other important analytical properties of the reaction have been studied. It is proposed that the purple color produced under these reaction conditions is that of 2-cyano-1,2,3-trihydroxy-2 H indene.     

Kinetic spectrophotometric determination of ethamsylate in dosage forms

A simple and sensitive kinetic method has been developed for the determination of ethamsylate (ESL) in its pharmaceutical preparations. The method is based upon oxidation of ESL with 3-methyl-2-benzothiazolinone hydrazone hydrochloride in presence of cerium (IV) ammonium sulfate at room temperature for 20 min. The absorbance of the reaction product is measured at 514 nm. The absorbance-concentration plot was rectilinear over the range of 4-30 microg/mL (r = 0.9999). The lower detection limit was 0.267 microl/mL (9.110 x 10(-6) M) and the lower quantitation limit was 0.808 microg/mL. The different experimental parameters affecting the development and stability of the reaction product were studied and optimized. The proposed method was applied to the determination of ESL in formulations, and the results obtained were in good agreement with those obtained using a reference method. The proposed method was also used for the in vitro detection of ESL in spiked human plasma at its therapeutic concentration level.     

高效液相色谱法测定大鼠血浆中的原儿茶酸

建立了大鼠血浆中原儿茶酸含量测定的高效液相色谱方法。采用的色谱柱为DiamondsilTM C18 柱(150 mm×4.6 mm,5 μm);流动相为乙腈-水(体积比为9∶91,用H3PO4 调pH至2.5);流速1.2 mL/min;检测波长260 nm;内标为对羟基苯甲酸。原儿茶酸的线性范围为0.050~3.20 mg/L,线性相关系数为0.9978，最低定量限为0.050 mg/L,日内和日间测定的精密度（以相对标准偏差表示）均低于7.0%,准确度（以相对误差表示）为-1.4%～2.6%；在0.050,0.40,3.20 mg/L低、中、高3个添加浓度水平下，血浆样品的提取回收率分别为83.4%,87.3%,91.1%。该方法简便,灵敏,准确,适用于大鼠体内原儿茶酸的药物动力学研究。     

Spectrofluorimetric determination of acetaminophen with N-bromosuccinimide

A simple, sensitive, and selective method for determination of acetaminophen based on its oxidation using N-bromosuccinimide (NBS) to produce a highly fluorescent product. Optimization of reaction variables was carried out concerning NBS concentration, pH, temperature, reaction time, and stability time. Under optimal analytical conditions, the fluorescent intensity was measured at lambda emission. 442 nm (excitation at lambda 330 nm). The linearity range is 120-800 ng/mL with lower detection limit of 33.6 ng/mL acetaminophen. The method was applied successfully to the determination of the compound in pharmaceutical preparations, with average recovery of 100.3 +/- 2%. The method was also applied successfully to the determination of the drug in spiked plasma samples, with an average recovery of 101.2 +/- 1%. Interference effects of some compounds, present in combination with acetaminophen, were studied and the tolerance limits of these compounds were determined.     

HPLC determination of andrographolide in rat whole blood: study on the pharmacokinetics of andrographolide incorporated in liposomes and tablets

A sensitive and simple high-performance liquid chromatographic method with UV detection was developed and validated for the determination of andrographolide in rat whole blood. Carbamazepine was employed as internal standard and the blood sample was extracted with chloroform. Chromatographic separations were achieved on a Chromasil ODS column (250 x 4.6 mm, 5 microm). The mobile phase was consisted of methanol-water (52:48, v/v) and delivered at 0.8 mL/min. The detection wavelength was set at 225 nm. The calibration curve had a good linearity in the range 0.053-530 microg/mL in rat whole blood with its correlation coefficient being 0.996. The extraction recovery of andrographolide was ranged from 65.7 to 72.6%. The intra-day and inter-days repeatabilities were below 4.2% in terms of the percentage of relative standard deviation (RSD). The method was used to provide data on the pharmacokinetics of the drug in rats. The data obtained was processed using the 3P87 pharmacokinetic program. The results showed that the disposition of andrographolide after intravenous administration of liposomal andrographolide conformed to a two-compartment open model with alpha = 4.75 x 10(-2) +/- 2.41 x 10(-3) min(-1), beta = 3.16 x 10(-3) +/- 1.58 x 10(-4) min(-1), V(c) = 174.67 +/- 13.97 mL, k(21) = 1.60 x 10(-2) +/- 8.12 x 10(-4) min(-1), k(10) = 9.38 x 10(-3) +/- 5.62 x 10(-4) min(-1), k(12) = 2.53 x 10(-2) +/- 1.27 x 10(-3) min(-1) and AUC(0-infinity) = 1525.47 +/- 92.35 microg min/mL. For the intragastric administration of andrographolide tablets, the disposition of andrographolide followed a one-compartment open model with k(e) = 6.78 x 10(-3) +/- 3.53 x 10(-4) min(-1), k(a) = 3.69 x 10(-2) +/- 4.68 x 10(-3) min(-1), T(max) = 59.69 +/- 3.61 min, C(max) = 1.62 +/- 0.11 microg/mL, V(c) = 1056.90 +/- 83.42 mL, AUC(0-infinity) = 348.75 +/- 24.41 microg min/mL.