N2S2Ni metallodithiolate complexes as ligands: structural and aqueous solution quantitative studies of the ability of metal ions to form M-S-Ni bridges to mercapto groups coordinated to nickel(II). implications for acetyl coenzyme A synthase

The nickel(II) complex of an N2S2 ligand, derived from a diazacycle, N,N'-bis(mercaptoethyl)-1,5-diazacycloheptane, (bme-dach)Ni, Ni-1', serves as a metallodithiolate ligand to NiII, CuI, ZnII, Ag, and PbII. The binding ability of the NiN2S2 ligand to the metal ions was established through spectrochemical titrations in aqueous media and compared to classical S-donor ligands. For M = Ni, Zn, Pb, binding constants, log K = ca. 2. were computed for 1:1 Ni-1'/M(solvate) adducts; for Ag+ and Cu+, the 3:2 (Ni-1')3M2 adducts were the first formed products even in water with log beta3,2 values of 26 and >30, respectively. In all cases, the binding ability of Ni-S-R is intermediate between that of a free thiolate and a free thioether. The great specificity for copper over nickel and zinc by N2S2Ni, which serves as a reasonable structural model for the distal nickel of the acetyl CoA synthase active site, relates to biochemical studies of heterogeneity (metal content and type) in various preparations of acetyl CoA synthase enzyme.     

Carbon monoxide induced decomposition of the active site [Ni-4Fe-5S] cluster of CO dehydrogenase

During the past two years, crystal structures of Cu- and Mo-containing carbon monoxide dehydrogenases (CODHs) and Ni- and Fe-containing CODHs have been reported. The active site of CODHs from anaerobic bacteria (cluster C) is composed of Ni, Fe, and S for which crystallographic studies of the enzymes from Carboxydothermus hydrogenoformans, Rhodospirillum rubrum, and Moorella thermoaceticarevealed structural similarities in the overall protein fold but showed substantial differences in the essential Ni coordination environment. The [Ni-4Fe-5S] cluster C in the fully catalytically competent dithionite-reduced CODH II from C. hydrogenoformans (CODHII(Ch)) at 1.6 A resolution contains a characteristic mu(2)-sulfido ligand between Ni and Fe1, resulting in a square-planar ligand arrangement with four S-ligands at the Ni ion. In contrast, the [Ni-4Fe-4S] clusters C in CO-treated CODH from R. rubrum resolved at 2.8 A and in CO-treated acetyl-CoA synthase/CODH complex from M. thermoacetica at 2.2 and 1.9 A resolution, respectively, do not contain the mu(2)-sulfido ligand between Ni and Fe1 and display dissimilar geometries at the Ni ion. The [Ni-4Fe-4S] cluster is composed of a cubane [Ni-3Fe-4S] cluster linked to a mononuclear Fe site. The described coordination geometries of the Ni ion in the [Ni-4Fe-4S] cluster of R. rubrum and M. thermoacetica deviate from the square-planar ligand geometry in the [Ni-4Fe-5S] cluster C of CODHII(Ch). In addition, the latter was converted into a [Ni-4Fe-4S] cluster under specific conditions. The objective of this study was to elucidate the relationship between the structure of cluster C in CODHII(Ch) and the functionality of the protein. We have determined the CO oxidation activity of CODHII(Ch) under different conditions of crystallization, prepared crystals of the enzyme in the presence of dithiothreitol or dithionite as reducing agents under an atmosphere of N(2) or CO, and solved the corresponding structures at 1.1 to 1.6 A resolutions. Fully active CODHII(Ch) obtained after incubation of the enzyme with dithionite under N(2) revealed the [Ni-4Fe-5S] cluster. Short treatment of the enzyme with CO in the presence of dithiothreitol resulted in a catalytically competent CODHII(Ch) with a CO-reduced [Ni-4Fe-5S] cluster, but a prolonged treatment with CO caused the loss of CO-oxidizing activity and revealed a [Ni-4Fe-4S] cluster, which did not contain a mu(2)-S. These data suggest that the [Ni-4Fe-4S] cluster of CODHII(Ch) is an inactivated decomposition product originating from the [Ni-4Fe-5S] cluster.     

Influence of Sulfur Metalation on the Accessibility of the Ni(II/I) Couple in [N,N'-Bis(2-mercaptoethyl)-1,5-diazacyclooctanato]nickel(II): Insight into the Redox Properties of [NiFe]-Hydrogenase

A redox model study of [NiFe] hydrogenase has examined a series of five polymetallics based on the metalation of the dithiolate complex [1,5-bis(mercaptoethyl)-1,5-diazacyclooctane]Ni(II), Ni-1. Crystal structures of three polymetallics of the series have been reported earlier: [(Ni-1)(2)()Ni]Cl(2)(), [(Ni-1)(2)()FeCl(2)()](2)(), and [(Ni-1)(3)()(ZnCl)(2)()]Cl(2)(). Two are described here: [(Ni-1)(2)()Pd]Cl(2)().2H(2)()Ocrystallizes in the monoclinic system, space group P2(1)/c with cell constants a = 12.212(4) ?, b = 7.642(2) ?, c = 16.625(3) ?, beta = 107.69(2) degrees, V = 1443.230(0) ?(3), Z = 2, R = 0.051, and R(w) = 0.056. [(Ni-1)(2)()CoCl]PF(6)() crystallizes in the triclinic system, space group P&onemacr;, with cell constants a = 8.14(2) ?, b = 13.85(2) ?, c = 15.67(2) ?, alpha = 113.59(10) degrees, beta = 101.84(14) degrees, gamma = 94.0(2) degrees, V = 1561.620(0)?(3), Z = 2, R = 0.072, and R(w) = 0.077. In all Ni-1 serves as a bidentate metallothiolate ligand with a "hinge" angle in the range 105-118 degrees and Ni-M distances of 2.7- 3.7 ?. The most accessible redox event is shown by EPR and electrochemistry to reside in the N(2)S(2)Ni unit and is the Ni(II/I) couple. Charge neutralization of the thiolate sulfurs by metalation can (dependent on the interacting metal) stabilize the Ni(I) state as efficiently as methylation forming a thioether. The implication of these results for the heterometallic active site of [NiFe]-hydrogenase as structured from Desulfovibrio gigas (Volbeda, A., et al. Nature, 1995, 373, 580), the generality of the Ni(&mgr;-SR)(2)M hinge structure, and a possible explanation for the unusual redox potentials are discussed.     

Sensing of sulfur dioxide by base metal thiolates: structures and properties of molecular NiN2S2/SO2 adducts

The cis-dithiolate N2S2Ni complex bismercaptoethanediazacycloheptanenickel(II), (bme-dach)Ni or Ni-1', takes up two equivalents of sulfur dioxide in which thiolate-sulfur to SO2-sulfur interactions are well-defined by X-ray crystallography. Ni-1' x 2SO2, C9H18N2NiO4S4, yields monoclinic crystals belonging to the P2(1)/c space group: a = 10.308(4) angstroms, b = 13.334(5) angstroms, c = 10.842(4) angstroms, alpha = 90 degrees, beta = 91.963(6) degrees, gamma = 90 degrees, and Z = 4. Further characterization by nu(SO) IR spectroscopy, thermal gravimetric analysis, electronic spectroscopy, and visual color changes upon reversible SO2 adduct formation establish Ni-1' and the analogous bismercaptoethanediazacyclooctane derivative, (bme-daco)Ni, Ni-1, to be viable candidates for technical development as chemical sensors of this noxious gas. Visual SO2 detection limits of Ni-1 and Ni-1' are established at 25 and 100 ppm, respectively. Both the Ni-1' x 2SO2 adduct and the Ni-1' reactant are air stable. In addition, the stability of Ni-1' x SO2 to vacuum and removal of SO2 by heating make Ni-1' a possible storage/controlled release complex for SO2 gas.     

Polydentate N(2)S(2)O and N(2)S(2)O(2) Ligands as Alcoholic Derivatives of (N,N'-Bis(2-mercaptoethyl)-1,5-diazacyclooctane)nickel(II) and (N,N'-Bis(2-mercapto-2-methylpropane)-1,5-diazacyclooctane)nickel(II)

The synthesis, structural characterization, spectroscopic, and electrochemical properties of N(2)S(2)-ligated Ni(II) complexes, (N,N'-bis(2-mercaptoethyl)-1,5-diazacyclooctane)nickel(II), (bme-daco)Ni(II), and (N,N'-bis(2-mercapto-2-methylpropane)1,5-diazacyclooctane)nickel(II), (bme-daco)Ni(II), derivatized at S with alcohol-containing alkyl functionalities, are described. Reaction of (bme-daco)Ni(II) with 2-iodoethanol afforded isomers, (N,N'-bis(5-hydroxy-3-thiapentyl)-1,5-diazacyclooctane-O,N,N',S,S')halonickel(II) iodide (halo = chloro or iodo), 1, and (N,N'-bis(5-hydroxy-3-thiapentyl)-1,5-diazacyclooctane-N,N',S,S')nickel(II) iodide, 2, which differ in the utilization of binding sites in a potentially hexadentate N(2)S(2)O(2) ligand. Blue complex 1 contains nickel in an octahedral environment of N(2)S(2)OX donors; X is best modeled as Cl. It crystallizes in the monoclinic space group P2(1)/n with a = 12.580(6) ?, b = 12.291(6) ?, c = 13.090(7) ?, beta = 97.36(4) degrees, and Z = 4. In contrast, red complex 2 binds only the N(2)S(2) donor set forming a square planar nickel complex, leaving both -CH(2)CH(2)OH arms dangling; the iodide ions serve strictly as counterions. 2 crystallizes in the orthorhombic space group Pca2(1) with a = 15.822(2) ?, b = 13.171(2) ?, c = 10.0390(10) ?, and Z = 4. Reaction of (bme-daco)Ni(II) with 1,3-dibromo-2-propanol affords another octahedral Ni species with a N(2)S(2)OBr donor set, ((5-hydroxy-3,7-dithianonadiyl)-1,5-diazacyclooctane-O,N,N',S,S')bromonickel(II) bromide, 3. Complex 3 crystallizes in the orthorhombic space group Pca2(1) with a = 15.202(5) ?, b = 7.735(2) ?, c = 15.443(4) ?, and Z = 4. Complex 4.2CH(3)CN was synthesized from the reaction of (bme-daco)Ni(II) with 1,3-dibromo-2-propanol. It crystallizes in the monoclinic space group P2/c with a = 20.348(5) ?, b = 6.5120(1) ?, c = 20.548(5) ?, and Z = 4.     

Heterobimetallics of nickel-iron dinitrosyl: electronic control by chelate and diatomic ligands

Reaction of [PPN][Fe(NO)2(SePh)2] (1) with dimeric [Ni(mu-SCH2CH2SCH2CH2S)]2 in the presence of additional NO2- produced the neutral heterobimetallic [(ON)Ni[(mu-SCH2CH2)2S]Fe(NO)2] complex (2). The X-ray crystal structures of 1 and 2 show distorted tetrahedral iron dinitrosyl groups, assigned according to the Feltham-Enemark notation as [Fe(NO)2]9 The Fe-NO bonds are off linearity by an average of approximately equals 10 degrees for compounds 1 and 2, while a more linear Ni-NO coordination with a Ni-NO distance of 1.644(2) A was found in 2. The v(NO) value of complex 2 is consistent with an assignment for [Ni(NO)]9 of Ni0(NO)+ as is known for analogous phosphine derivatives, P3Ni0(NO)+. EPR signals of g values = 2.02-2.03 confirmed the existence of the odd electron in the chalcogenated [Fe(NO)2]9 compounds. Two [Fe(NO)2]10 complexes coordinated by the nickel(II) dithiolate, (bismercaptoethanediazacyclooctane)nickel(II), (Ni-1), (Ni-1)Fe(CO)(NO)2 and (Ni-1)Fe(NO)2, were prepared for comparison to the Ni0(NO)+ derivative and other monomeric and homodimetallic derivatives of the Fe(NO)2 fragment. While the oxidation level of Fe(NO)2 is the primary determinant of v(NO) values, they are also highly sensitive to ancillary ligands and, thereby, the distal metal influence through the bridging thiolate donor.     

Diligating tripodal amido-phosphine ligands: the effect of a proximal antipodal early transition metal on phosphine donor ability in a building block for heterometallic complexes

The ligand precursors P(CH2NH-3,5-(CF3)2C6H3)3 (1a), P(CH2NHPh)3 (1b), and P(CH2NH-3,5-Me2C6H3)3 (1c), react with the reagents Ti(NMe2)4 and tBuN=Ta(NEt2)3 to generate metal complexes of the type P(CH2NAr(R))3TiNMe2 (2a-c) and P(CH2NAr(R))3Ta=NtBu (3a-c) (where Ar(R) = 3,5-(CF3)2C6H3, Ph, and 3,5-Me2C6H3). Due to ring strain, the phosphine lone pair cannot chelate and is available to bind a second metal, and this feature can be utilized to synthesize heterometallic polynuclear complexes. The 31P chemical shifts observed upon complexation of the early transition metals to the amido donors are large and in the opposite direction expected for the increased C-P-C bond angles in these complexes; these unusual shifts are due to P-Ti and P-Ta distances that are significantly shorter than the sum of van der Waals radii. The reaction of 2c with Ni(CO)4 produces at first the bimetallic complex (CO)3Ni[P(CH2N-3,5-Me2C6H3)3TiNMe2] (4c), which gradually converts to the trimetallic complex (CO)2Ni[P(CH2N-3,5-Me2C6H3)3TiNMe2]2 (5c). The effect of the complexation of Ti and Ta fragments on the donor ability of the phosphine ligand was determined by the preparation of the bis-phosphine complexes trans-L(2)Rh(CO)Cl, (where L = 1a-c, 2a-c, and 3a-c) prepared by the reaction of the appropriate phosphine with [Rh(CO)2(mu-Cl)]2, and a measurement of the resultant CO stretching frequencies. Surprisingly, the complexes with the larger C-P-C angles are significantly poorer donors. Density functional theory calculations were performed to determine what factors affect the donor ability of the phosphine and if through-space interactions might play an important role in the observed electronic properties.     

Electronic effects of (N2S2)M(NO) complexes (M = Fe, Co) as metallodithiolate ligands

Heterobimetallic complexes comprised of W(CO)4 adducts of (N2S2)M(NO) have been isolated and characterized by nu(CO) and nu(NO)IR spectroscopies and X-ray diffraction. The molecular structures of (N2S2)M(NO) compounds (bme-dach)Co(NO), [(bme-dach)Co(NO)]W(CO)4, and [(bme-dach)Fe(NO)]W(CO)4 [bme-dach = N, N'-bis(2-mercaptoethyl)-1,4-diazacycloheptane)] find the square-pyramidal (bme-dach)M(NO) unit to serve as a bidentate ligand via the cis-dithiolato sulfurs, with a hinge angle of the butterfly bimetallic structures of ca. 130 degrees . The W(CO)4 moiety is used as a probe of the electron-donor ability of the nitrosyl complexes through CO stretching frequencies that display a minor increase as compared to analogous [(N2S2)Ni]W(CO)4 complexes. These findings are consistent with the electron-withdrawing influence of the {Co(NO)}(8) and {Fe(NO)}(7) units on the bridging thiolate sulfurs relative to Ni(2+). Also sensitive to derivatization by W(CO)4 is the NO stretch, which blue shifts by ca. 30 and 50 cm(-1) for the Co and Fe complexes, respectively. Cyclic voltammetry studies find similar reduction potentials (-1.08 V vs NHE in N, N-dimethylformamide solvent) of the (bme-dach)Co(NO) and (bme-dach)Fe(NO) free metalloligands, which are positively shifted by ca. 0.61 and 0.48 V, respectively, upon complexation to W(CO)4.     

Comparisons of zinc with cadmium in N2S2 coordination and as S-bonded adducts to tungsten carbonyls

The synthesis and characterization of bis-mercaptoethanediazaheptane cadmium(II) is reported and compared to the analogous zinc complex. Of significance is the dimeric form of the [Zn(N(2)S(2))](2) complex achieves penta-coordination about zinc through a bridging thiolate whereas cadmium engages two thiolate as S-bridges resulting in hexa-coordination about cadmium within a coordination polymer whose X-ray crystal structure is reported here. In the presence of W(CO)(5), this polymer breaks up, generating dimeric [Cd(N(2)S(2))](2) with two W(CO)(5) units appended to the terminal thiolates, a feat that is not observed for the zinc dimer analogue. The greater thiophilicity of cadmium over zinc is noted in several features of these complexes.     

A Coordination Polymer of Nickel(II) Based on a Pentadentate N, S, and O Donor Ligand

The synthesis, structural characterization, and electrochemical properties of a Ni(II) complex derived from the template reaction of N,N'-bis(2-mercaptoethyl)-1,5-diazacyclooctane nickel(II), Ni-1, with ICH(2)CO(2)Na are described. Blue N-(3-thiabutyl)-N'-(3-thiapentanoate)-1,5-diazacyclooctanenickel(II)iodide, [(tbtp-daco)Ni][I], [5]I, contains Ni(II) in an octahedral environment with N(2)S(2)O(2) donor atoms; one oxygen is from an adjacent [(tbtp-daco)Ni] ion and has the same distance to Ni(II) as the intramolecular oxygen, resulting in a coordination polymer. Complex [5]I.H(2)O, C(13)H(27)N(2)O(3)S(2)NiI, crystallizes in the orthorhombic space group Pbca with a = 10.898(3), b = 18.103(5), c = 19.020(5), and Z = 8. The extent to which the polymer is retained in solution is counterion dependent, which influences redox properties (accessibility of Ni(I) and Ni(III)).     

NiN(2)S(2) complexes as metallodithiolate ligands to Rh(I), Rh(II) and Rh(III)

Three molecular structures are reported which utilize the NiN(2)S(2) ligands -, (bis(mercaptoethyl)diazacyclooctane)nickel and -', bis(mercaptoethyl)diazacycloheptane)nickel, as metallodithiolate ligands to rhodium in oxidation states i, ii and iii. For the Rh(I) complex, the NiN(2)S(2) unit behaves as a bidentate ligand to a square planar Rh(I)(CO)(PPh(3))(+) moiety with a hinge or dihedral angle (defined as the intersection of NiN(2)S(2) and S(2)Rh(C)(P) planes) of 115 degrees . Supported by -' ligands, the Rh(II) oxidation state occurs in a dirhodium C(4) paddlewheel complex wherein four NiN(2)S(2) units serve as bidentate bridging ligands to two singly-bonded Rh(II) ions at 2.893(8) A apart. A compilation of the remarkable range of M-M distances in paddlewheel complexes which use NiN(2)S(2) complexes as paddles is presented. The Rh(III) state is found as a tetrametallic [Rh(-')(3)](3+) cluster, roughly shaped like a boat propeller and structurally similar to tris(bipyridine)metal complexes.     

A convergent approach to the synthesis of multimetallic dithiolene complexes

Controlled base hydrolysis of one or both of the protected 1,2-dithiolene chelates of 1,3,5,7-tetrathia- s-indacene-2,6-dione (OCS 2C 6H 2S 2CO) enables the stepwise synthesis of di- and trimetallic complexes with 1,2,4,5-benzenetetrathiolate as the connector. Treatment of OCS 2C 6H 2S 2CO with MeO (-), followed by [NiBr 2(dcpe)] [dcpe = 1,2-bis(dicyclohexylphosphino)ethane], yields [(dcpe)Ni(S 2C 6H 2S 2CO)] ( 4). The reaction of 4 with EtO (-), followed by [MX 2(dcpe)] (X = halide), yields [(dcpe)Ni(S 2C 6H 2S 2)M(dcpe)] [M = Ni ( 5a), Pd ( 5b)]. Deprotection of the 1,3-dithiol-2-one group of 4, followed by introduction of (1)/ 2 equiv of MX 2 and then I 2, yields the neutral trimetallic compounds [(dcpe)Ni(S 2C 6H 2S 2)] 2M [M = Ni ( 6a), Pt ( 6b)]. Tetrahedralization at nickel is observed in 5a, which density functional theory calculations attribute to second-order Jahn-Teller effects, while 6a and 6b display an end-to-end folding of approximately 46 degrees . A color darkening is observed in moving from 4 to compounds 6 due to the increasing size of the conjugated metal-organic pi system. Intense, broad absorptions in the near-IR are observed for 6a and 6b.     

Nickel dithiolenes revisited: structures and electron distribution from density functional theory for the three-member electron-transfer series [Ni(S2C2Me2)2]0,1-,2-

The complexes [Ni(S2C2Me2)2](z) (z = 0, 1-, 2-) have been isolated for the purpose of investigating their electronic structures in a reversible three-member electron-transfer series. Members are interrelated by reversible redox reactions with E(1/2)(0/1-) = -0.15 V and E(1/2)(1-/2-) = -1.05 V versus SCE in acetonitrile. The three complexes have nearly planar structures of idealized D(2)(h) symmetry. As the series is traversed in the reducing direction, Ni-S and C-S bond lengths increase; the chelate ring C-C bond length decreases from the neutral complex to the monoanion and does not change significantly in the dianion. Structural trends are compared with previous results for [Ni(S2C2R2)2)](1-,2-). Following the geometrical changes, values of nu(Ni)(-)(S) and nu(C)(-)(S) decrease, while the value of nu(C)(-)(C) increases with increased reduction. Geometry optimizations at the density functional theory (DFT) level were performed for all members of the series. Geometrical parameters obtained from the calculations are in good agreement with the experimental findings. The 5b(2g) orbital was identified as the LUMO in [Ni(S2C2Me2)2], the SOMO in [Ni(S2C2Me2)2](1-), and the HOMO in [Ni(S2C2Me2)2]2-. Unlike in the situation in the [M(CO)2-(S2C2Me2)2]z series (M = Mo, W; z = 0, 1-, 2-), the apparent contribution from the metal d orbital in the electroactive orbital is not constant. In the present series, the d(xz) contribution increases from 13 to 20 to 39% upon passing from the neutral to the monoanionic to the dianionic complex. Accurate calculation of EPR g-values of [Ni(S2C2Me2)2]1- by DFT serves as a test for the reliability of the electronic structure calculations.     

(NEt(4))(2)[Fe(CN)(2)(CO)('S(3)')]: an iron thiolate complex modeling the [Fe(CN)(2)(CO)(S-Cys)(2)] site of [NiFe] hydrogenase centers

In the search for complexes modeling the [Fe(CN)(2)(CO)(cysteinate)(2)] cores of the active centers of [NiFe] hydrogenases, the complex (NEt(4))(2)[Fe(CN)(2)(CO)('S(3)')] (4) was found ('S(3)'(2-)=bis(2-mercaptophenyl)sulfide(2-)). Starting complex for the synthesis of 4 was [Fe(CO)(2)('S(3)')](2) (1). Complex 1 formed from [Fe(CO)(3)(PhCH=CHCOMe)] and neutral 'S(3)'-H(2). Reactions of 1 with PCy(3) or DPPE (1,2-bis(diphenylphosphino)ethane) yielded diastereoselectively [Fe(CO)(2)(PCy(3))('S(3)')] (2) and [Fe(CO)(dppe)('S(3)')] (3). The diastereoselective formation of 2 and 3 is rationalized by the trans influence of the 'S(3)'(2-) thiolate and thioether S atoms which act as pi donors and pi acceptors, respectively. The trans influence of the 'S(3)'(2-) sulfur donors also rationalizes the diastereoselective formation of the C(1) symmetrical anion of 4, when 1 is treated with four equivalents of NEt(4)CN. The molecular structures of 1, 3 x 0.5 C(7)H(8), and (AsPh(4))(2)[Fe(CN)(2)(CO)('S(3)')] x acetone (4 a x C(3)H(6)O) were determined by X-ray structure analyses. Complex 4 is the first complex that models the unusual 2:1 cyano/carbonyl and dithiolate coordination of the [NiFe] hydrogenase iron site. Complex 4 can be reversibly oxidized electrochemically; chemical oxidation of 4 by [Fe(Cp)(2)PF(6)], however, led to loss of the CO ligand and yielded only products, which could not be characterized. When dissolved in solvents of increasing proton activity (from CH(3)CN to buffered H(2)O), complex 4 exhibits drastic nu(CO) blue shifts of up to 44 cm(-1), and relatively small nu(CN) red shifts of approximately 10 cm(-1). The nu(CO) frequency of 4 in H(2)O (1973 cm(-1)) is higher than that of any hydrogenase state (1952 cm(-1)). In addition, the nu(CO) frequency shift of 4 in various solvents is larger than that of [NiFe] hydrogenase in its most reduced or oxidized state. These results demonstrate that complexes modeling properly the nu(CO) frequencies of [NiFe] hydrogenase probably need a [Ni(thiolate)(2)] unit. The results also demonstrate that the nu(CO) frequency of [Fe(CN)(2)(CO)(thiolate)(2)] complexes is more significantly shifted by changing the solvent than the nu(CO) frequency of [NiFe] hydrogenases by coupled-proton and electron-transfer reactions. The "iron-wheel" complex [Fe(6)[Fe('S(3)')(2)](6)] (6) resulting as a minor by-product from the recrystallization of 2 in boiling toluene could be characterized by X-ray structure analysis.     

Synthesis and structure of nickel-containing cuboidal clusters derived from [W3Se4(H2O)9]4+. Site-differentiated substitution at the nickel site in the series [W3NiQ4(H2O)10]4+ (Q = S, Se)

New Ni-containing heterometallic cuboidal cluster aqua complex [W3(NiCl)Se4(H2O)9]3+, the missing link in the family of the M3NiQ4 clusters (M = Mo, W; Q = S, Se), has been prepared by the reaction of [W3Se4(H2O)9]4+ with Ni in 2 M HCl. Single crystals of edge-linked double-cuboidal cluster [{W3NiSe4(H2O)9}2](pts)8.18H2O (pts = p-toluenesulfonate) were grown from the solution of the aqua complex in 3 M Hpts, and their structures were determined. The Ni site in the clusters [W3(NiCl)Q4(H2O)9]3+ selectively coordinates typical pi-acceptor ligands such as CO, olefins, acetylenes, phosphines, arsines, or SnCl3-. This allows stabilization by coordination of such elusive species as HP(OH)2 and As(OH)3. The stability constants for coordination of HP(OH)2, As(OH)3, and SnCl3- were determined. The Se for S substitution increases the stability by 1-2 orders of magnitude. Supramolecular adducts with cucurbit[6]uril (Cuc), [W3(Ni(HP(OH)2))Q4(H2O)9]Cl4.Cuc.11H2O and [W3(NiAs(OH)3)S4(H2O)8Cl]Cl3.Cuc.13H2O, were isolated and structurally characterized.     

P2 addition to terminal phosphide M[triple bond]P triple bonds: a rational synthesis of cyclo-P3 complexes

The diphosphaazide complex (Mes*NPP)Nb(N[Np]Ar)3 (Mes* = 2,4,6-tri-tert-butylphenyl, Np = neopentyl, Ar = 3,5-Me2C6H3), 1, has previously been reported to lose the P2 unit upon gentle heating, to form (Mes*N)Nb(N[Np]Ar)3, 2. The first-order activation parameters for this process have been estimated here using an Eyring analysis to have the values Delta H(double dagger) = 19.6(2) kcal/mol and Delta S(double dagger) = -14.2(5) eu. The eliminated P2 unit can be transferred to the terminal phosphide complexes P[triple bond]M(N[(i)Pr]Ar)3, 3-M (M = Mo, W), and [P[triple bond]Nb(N[Np]Ar)3](-), 3-Nb, to give the cyclo-P3 complexes (P3)M(N[(i)Pr]Ar)3 and [(P3)Nb(N[Np]Ar)3](-). These reactions represent the formal addition of a P[triple bond]P triple bond across a M[triple bond]P triple bond and are the first efficient transfers of the P2 unit to substrates present in stoichiometric quantities. The related complex (OC)5W(Mes*NPP)Nb(N[Np]Ar)3, 1-W(CO)5, was used to transfer the (P2)W(CO)5 unit in an analogous manner to the substrates 3-M (M = Mo, W, Nb) as well as to [(OC)5WP[triple bond]Nb(N[Np]Ar)3](-). The rate constants for the fragmentation of 1 and 1-W(CO)5 were unchanged in the presence of the terminal phosphide 3-Mo, supporting the hypothesis that molecular P2 and (P2)W(CO)5, respectively, are reactive intermediates. In a reaction related to the combination of P[triple bond]P and M[triple bond]P triple bonds, the phosphaalkyne AdC[triple bond]P (Ad = 1-adamantyl) was observed to react with 3-Mo to generate the cyclo-CP2 complex (AdCP2)Mo(N[(i)Pr]Ar)3. Reactions of the electrophiles Ph3SnCl, Mes*NPCl, and AdC(O)Cl with the anionic, nucleophilic complexes [(OC)5W(P3)Nb(N[Np]Ar)3](-) and [{(OC)5W}2(P3)Nb(N[Np]Ar)3](-) yielded coordinated eta(2)-triphosphirene ligands. The Mes*NPW(CO)5 group of one such product engages in a fluxional ring-migration process, according to NMR spectroscopic data. The structures of (OC)5W(P3)W(N[(i)Pr]Ar)3, [(Et2O)Na][{(OC)5W}2(P3)Nb(N[Np]Ar)3], (AdCP2)Mo(N[(i)Pr]Ar)3, (OC)5W(Ph3SnP3)Nb(N[Np]Ar)3, Mes*NP(W(CO)5)P3Nb(N[Np]Ar)3, and {(OC)5W}2AdC(O)P3Nb(N[Np]Ar)3, as determined by X-ray crystallography, are discussed in detail.     

Preparative and structural studies on iron(II)-thiolate cyanocarbonyls: relevance to the [NiFe]/[Fe]-hydrogenases

A number of thermally stable iron(II)-thiolate cyanocarbonyl complexes, cis,cis-[Fe(CN)2(CO)2(CS3-S,S)]2-(1), mer-[Fe(CO)2(CN)3(NCCH3)]-(2)mer-[Fe(CO)3(CN)(CS3-S,S)]-(3), cis-[Fe(CO)2(CN)(S(CH2)2S(CH2)2S-S,S,S)]-(4), [Fe(CO)2(CN)3Br]2-(5), mer-[Fe(CO)2(CN)3(m-SC6H4Br)]2-(6) and mer-[Fe(CO)2(CN)3(SPh)]2-(7) were isolated and characterized by IR and X-ray diffraction analysis. The extrusion of one strong sigma-donor CN- ligand instead of CO from the iron(II) center of the thermally stable complexes [FeII(CO)2(CN)3Br]2-(5) containing less electron-donating bromide reflects the electron-rich character of the mononuclear [FeII(CN)2(CO)2(CS3-S,S)]2-(1) when ligated by by the bidentate thiolate, and the combination of one cyanide, two carbonyls and a tridentate thiolate provides the stable complex 4 as a result of the reaction of complex 5 and chelating ligand [S(CH2)2S(CH2)2S]2-. The preference of the sixth ligand coordinated to the unsaturated [FeII(CO)(CN)2(CS3-S,S)]2- Fe(II) center, the iron-site architecture of the bimetallic Ni-Fe active-site of [NiFe] hydrogenases, is a strong pi-acceptor CO group. Scrutiny of the coordination chemistry of iron(II)-thiolate cyanocarbonyl species [FeII(CO)x(CN)y(SR)z]n- reveals that certain combinations of thiolate, cyanide and carbonyl ligands (3 < or = y+z > or = 4) bound to Fe(II) are stable and this could point the way to understand the reasons for Nature's choice of combinations of these ligands in hydrogenases.     

Synthesis and Crystal Structure of a Molybdenum Carbonyl Compound with Thiolate and Dithiocarbamate Ligands,[Bu4N][(OC)4Mo(μ-SC6H5)2Mo(C5H10CNS2)(CO)2]

A di-molybdenum carbonyl compound containing thiolate and dithiocarbamate li- gands, [Bu4N][(CO)4Mo(μ-SC6H5)2Mo(C5H10dtc)(CO)2] 1 (C5H10dtc = S2CNC5H10), has been pre- pared by reaction of [Mo2(SC6H5)2(CO)8] with C5H10dtcNa and [NBu4]Br in acetone. It crystallizes in monoclinic, space group P21/n with a = 13.162(3), b = 17.466(2), c = 20.453(4)(A),β = 100.77(1)°, Z = 4, V = 4619(2)(A)3, C40H56Mo2N2O6S4, Mr = 980.95, Dc = 1.389 g/cm3, μ= 7.66 cm-1, F(000) = 1988 and R = 0.0746 for 5161 observed reflections with I > 2σ(I). The complex contains a [Mo2S2]2- planar core in which one Mo atom is chelated by a C5H10dtc ligand, leading to different coordination environments of the two Mo atoms. 95Mo NMR measurement indicates that the two Mo atoms are in different oxidation states.     

Cubane-type heterometallic sulfido clusters: incorporation of two metal fragments into a dinuclear ReS(mu-S)2ReS core affording bimetallic M2Re2(mu 3-S)4 clusters (M = Ru,Pt, Cu) or trimetallic MM'Re2(mu 3-S)4 clusters via incomplete cubane-type MRe2(mu 3-S)(mu 2-S)3 intermediates (M = Ru,Rh, Ir; M' = Mo,W, Pd,Ru, Rh)

Reactions of a dirhenium tetra(sulfido) complex [PPh(4)](2)[ReS(L)(mu-S)(2)ReS(L)] (L = S(2)C(2)(SiMe(3))(2)) with a series of group 8-11 metal complexes in MeCN at room temperature afforded either the cubane-type clusters [M(2)(ReL)(2)(mu(3)-S)(4)] (M = CpRu (2), PtMe(3), Cu(PPh(3)) (4); Cp = eta(5)-C(5)Me(5)) or the incomplete cubane-type clusters [M(ReL)(2)(mu(3)-S)(mu(2)-S)(3)] (M = (eta(6)-C(6)HMe(5))Ru (5), CpRh (6), CpIr (7)), depending on the nature of the metal complexes added. It has also been disclosed that the latter incomplete cubane-type clusters can serve as the good precursors to the trimetallic cubane-type clusters still poorly precedented. Thus, treatment of 5-7 with a range of metal complexes in THF at room temperature resulted in the formation of novel trimetallic cubane-type clusters, including the neutral clusters [[(eta(6)-C(6)HMe(5))Ru][W(CO)(3)](ReL)(2)(mu(3)-S)(4)], [(CpM)[W(CO)(3)](ReL)(2)(mu(3)-S)(4)] (M = Rh, Ir), [(Cp*Ir)[Mo(CO)(3)](ReL)(2)(mu(3)-S)(4)], [[(eta(6)-C(6)HMe(5))Ru][Pd(PPh(3))](ReL)(2)(mu(3)-S)(4)], and [(Cp*Ir)[Pd(PPh(3))](ReL)(2)(mu(3)-S)(4)] (13) along with the cationic clusters [(Cp*Ir)(CpRu)(ReL)(2)(mu(3)-S)(4)][PF(6)] (14) and [(Cp*Ir)[Rh(cod)](ReL)(2)(mu(3)-S)(4)][PF(6)] (cod = 1,5-cyclooctadiene). The X-ray analyses have been carried out for 2, 4, 7, 13, and the SbF(6) analogue of 14 (14') to confirm their bimetallic cubane-type, bimetallic incomplete cubane-type, or trimetallic cubane-type structures. Fluxional behavior of the incomplete cubane-type and trimetallic cubane-type clusters in solutions has been demonstrated by the variable-temperature (1)H NMR studies, which is ascribable to both the metal-metal bond migration in the cluster cores and the pseudorotation of the dithiolene ligand bonded to the square pyramidal Re centers, where the temperatures at which these processes proceed have been found to depend upon the nature of the metal centers included in the cluster cores.     

Heterometallic cluster complexes (RhMo, RhW) containing bridging 1,2-dicarba-closo-dodecaborane-1,2-dichalocogenolato ligands

The 16-electron half-sandwich rhodium complex [Cp*Rh{E2C2(B10H10)}] [Cp* = eta5-C5Me5, E = S (1a), Se (1b)] [Cp*Rh{E2C2(B10H10)} = eta5-pentamethylcyclopentadienyl[1,2-dicarba-closo-dodecaborane(12)-dichalcogenolato]rhodium] reacted with Mo(CO)3(py)3 in the presence of BF3.Et2O in THF solution to afford the {Cp*Rh[E2C2(B10H10)]}2Mo(CO)2 (E = S (3a); Se (3b)), {Cp*Rh[S2C2(B10H10)]}{Mo(CO)2[S2C2(B10H10)]} (4). The voluminous di-tert-butyl substituted Cp half-sandwich rhodium complex [Cp'Rh{E2C2(B10H10)}] [E = S (2a), Se (2b)] [CpRh{E2C2(B10H10)} = eta5-(1,3-di(tert-butyl)cyclopentadienyl-[1,2-dicarba-closo-dodecaborane(12)-dichalcogenolato]rhodium) reacted with W(CO)3(py)3 in the presence of BF3.Et2O in THF solution to give the {Cp'Rh[S2C2(B10H10)]}{W(CO)2[S2C2(B10H10)]} (5) and {Cp'Rh[Se2C2(B10H10)]}(mu-CO)[W(CO)3] (6), respectively. The complexes have been fully characterized by IR and NMR spectroscopy as well as by elemental analyses. The X-ray crystal structures of the complexes 3-6 are reported.