The temperature-dependent elastic properties of B2-MgRE intermetallic compounds from first principles

The temperature-dependent elastic modulus of MgRE (RE=Y, Dy, Pr, Sc, Tb) intermetallics with B2-type structure are presented from first-principles quasistatic approach, in which the static volume-dependent elastic constants are obtained by the first-principles total-energy method within density functional theory and the thermal expansion is obtained from the quasiharmonic approach based on density-functional perturbation theory. The comparison between the predicted results and the available experimental data for a benchmark material NiAl provides good agreements. At T=0 K, our calculated values of lattice parameter and elastic moduli for MgRE intermetallics show excellent agreement with previous theoretical results and experimental data. With temperature increasing, we find that the elastic constants satisfy the stability conditions for B2 structures and follow a normal behavior with temperature, i.e., decrease and approach linearity at higher temperature and zero slope around zero temperature. In addition, the sound velocities as a function of temperature for the NiAl and MgRE intermetallics are calculated and the relations to phonon spectrums have also been discussed.     

On the core structure and mobility of the 〈100〉{010} and 〈100〉{01^-1} dislocations in B2 structure YAg and YCu

Dislocations are thought to be the principal mechanism of high ductility of the novel B2 structure intermetallic compounds YAg and YCu.In this paper,the edge dislocation core structures of two primary slip systems 〈100 〉{010} and 〈100 〉 {011} for YAg and YCu are presented theoretically within the lattice theory of dislocation.The governing dislocation equation is a nonlinear integro-differential equation and the variational method is applied to solve the equation.Peierls stresses for 〈100 〉 {010} and 〈100 〉 {011} slip systems are calculated taking into consideration the contribution of the elastic strain energy.The core width and Peierls stress of a typical transition-metal aluminide NiAl is also reported for the purpose of verification and comparison.The Peierls stress of NiAl obtained here is in agreement with numerical results,which verifies the correctness of the results obtained for YAg and YCu.Peierls stresses of the 〈100 〉 {011} slip system are smaller than those of〈100 〉 {010} for the same intermetallic compounds originating from the smaller unstable stacking fault energy.The obvious high unstable stacking fault energy of NiAl results in a larger Peierls stress than those of YAg and YCu although they have the same B2 structure.The results show that the core structure and Peierls stress depend monotonically on the unstable stacking fault energy.     

Elastic and brittle properties of the B2-MgRE (RE = Sc,Y, Ce,Pr, Nd,Gd, Tb,Dy, Ho,Er) intermetallics

The brittle and elastic properties of the B2-MgRE (RE = Sc, Y, Ce, Pr, Nd, Gd, Tb, Dy, Ho, Er) intermetallics have been investigated using first-principles density functional calculations. The calculated equilibrium lattice constants and enthalpies of formation are in overall agreement with the available experiment and theoretical results. The related physical properties of those compounds are compared with that of ductile YCu. The Fermi energy occurs above a peak in the DOS for B2-MgRE intermetallics, whereas for ductile YCu the Fermi energy occurs near a minimum in the DOS. For B2-YCu, the partial density of states of d-states at the Fermi energy is low, while for B2-MgRE the RE d-states are partially occupied, indicating their important roles in the directional bonding for this material. The Cauchy pressure (C₁₂-C₄₄) and the ratio of bulk to shear modulus B/G are used to assess the brittle/ductile behavior of B2-MgRE and YCu compounds. It can be concluded that the B2-MgRE alloys have brittle behavior. MgSc is the most brittle, and MgHo is the least brittle amongst those alloys.     

First-Principles Calculations of Structural,Elastic and ElectronicProperties of Tetragonal HfO2under Pressure

Structural, elastic and electronic properties of tetragonal HfO₂ at applied hydrostatic pressure up to 50 GPa have been investigated using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory (DFT). The calculated ground-state properties are in good agreement with previous theoretical and experimental data. Six independent elastic constants of tetragonal HfO₂ have been calculated at zero pressure and high pressure. From the obtained elastic constants, the bulk, shear and Young's modulus, Poisson's coefficients, acoustic velocity and Debye temperature have been calculated at the applied pressure. Band structure shows that tetragonal HfO₂ is an indirect band gap. The variation of the gap versus pressure is well fitted to a quadratic function.     

Site preference and elastic properties of ternary alloying additions in B2 YAg alloys by first-principles calculations

First-principles calculations were preformed to study the site preference behavior and elastic properties of 3d (Ti–Cu) transition-metal elements in B2 ductility YAg alloy. In YAg, Ti is found to occupy the Y sublattice whereas V, Cr, Co, Fe, Ni and Cu tend to substitute for Ag sublattice. Due to the addition of 3d transition metals, the lattice parameters of YAg is decreased in the order: V<Cu<Cr<Ni<Co<Fe<Ti. The calculated elastic constants show that Cr, Fe, Co and Cu can improve the ductility of YAg alloy, and Fe is the most effective element to improve the ductility of YAg, while Ti, Ni and V alloying elements can reduce the ductility of YAg alloy, especially, V transforms ductile into brittle for YAg alloy. In addition, both V and Ni alloying elements can increase the hardness of YAg alloy, and Y₈Ag₇V is harder than Y₈Ag₇Ni.     

First-principles study of elastic and thermo-physical properties of kesterite-type Cu2ZnSnS4

The lattice constants and elastic constants of the kesterite-type Cu₂ZnSnS₄ have been calculated using density-functional theory (DFT). The calculated lattice constants are in good agreement with the experimental data. The calculated elastic constants indicate that the bonding strength along the [1 0 0] and [0 1 0] directions is as strong as the one along the [0 0 1] direction. The high B/G ratio shows that the kesterite-type Cu₂ZnSnS₄ compound has ductile behavior. Finally, using the Debye model, the volume, bulk modulus and heat capacity as a function of temperature for the kesterite-type CZTS have been estimated at different pressures. The Debye temperature and Gruneisen parameter are 157 K and 2.28 at 300 K temperature, respectively. The present results can give some information for the design of the kesterite-type CZTS compounds, and these can also be used to stimulate future experimental and theoretical work.     

Ab-initio study of electronic and elastic properties of B2-type ductile YM (M=Cu, Zn and Ag) intermetallics

A theoretical study of structural, electronic, elastic, thermal and mechanical properties of nonmagnetic intermetallics YM (M=Cu, Zn and Ag), which crystallize in CsCl-type structure, is performed using first principles density functional theory based on full potential linearized augmented plane wave (FP-LAPW) method. The calculations are carried out within the generalized gradient approximation (GGA) for the exchange correlation potential. The calculated ground state properties such as lattice constants, bulk modulus and elastic constants agree well with the experiment. From energy dispersion curves, it is found that these compounds are metallic in nature. The ductility of these intermetallics is determined by calculating the bulk to shear ratio B/G_H. The calculated results indicate that YAg is the most ductile amongst the present YM compounds. The results obtained are compared with the available experimental and theoretical results. The mechanical and thermal properties are predicted from the calculated values of elastic constants.     

First-Principles Calculations of Elastic Properties of LaNi5 Compound

The equilibrium lattice constants, temperature dependence of bulk modulus, the pressure dependence of the normalized volume V/V0, elastic constants Cij and bulk modulus of LaNi5 crystal are obtained using the firstprincipies piane-wave pseudopotential method in the GGA-PBE generalized gradient approximation as well as the quasi-harmonic Debye model. We analyse the relationship between bulk modulus and temperature up to 2000 K and obtain the relationship between bulk modulus B and pressure at diFFerent temperatures. It is found that the bulk modulus B increases monotonously with increasing pressure. Moreover, the pressure dependences of Debye temperatures and the pressure derivatives of lattice constants are also successfully obtained. The calculated results are in agreement with the experimental data and the other theoretical results.     

Elastic constants and anisotropy of RuB2 under pressure

The structural, elastic constants and anisotropy of RuB2 under pressure are investigated by first-principles calcula-tions based on the plane wave pseudopotential density functional theory method within the local density approximation (LDA) as well as the generalized gradient approximation (GGA) for exchange and correlation. The results accord well with the available experimental and other theoretical data. The elastic constants, elastic anisotropy, and Debye temperature Θ as a function of pressure are presented. It is concluded that RuB2 is brittle in nature at low pressure, whereas it becomes ductile at higher pressures. An analysis for the calculated elastic constant has been made to reveal the mechanical stability of RuB2 up to 100 GPa.     

First-principles study of the elastic constants and optical properties of uranium metal

We perform first-principles calculations of the lattice constants,elastic constants,and optical properties for alphaand gamma-uranium based on the ultra-soft pseudopotential method.Lattice constants and equilibrium atomic volume are consistent pretty well with the experimental results.Some difference exists between our calculated elastic constants and the experimental data.Based on the satisfactory ground state electronic structure calculations,the optical conductivity,dielectric function,refractive index,and extinction coefficients are also obtained.These calculated optical properties are compared with our results and other published experimental data.     

Phase transition,elastic and electronic properties of topological insulator Sb_2Te_3 under pressure: First principle study

The phase transition, elastic and electronic properties of three phases(phase Ⅰ,Ⅱ, and Ⅲ) of Sb_2Te_3 are investigated by using the generalized gradient approximation(GGA) with the PBESOL exchange–correlation functional in the framework of density-functional theory. Some basic physical parameters, such as lattice constants, bulk modulus, shear modulus,Young's modulus, Poisson's ratio, acoustic velocity, and Debye temperature Θ are calculated. The obtained lattice parameters under various pressures are consistent with experimental data. Phase transition pressures are 9.4 GPa(Ⅰ→Ⅱ) and 14.1 GPa(Ⅱ→Ⅲ), which are in agreement with the experimental results. According to calculated elastic constants, we also discuss the ductile or brittle characters and elastic anisotropies of three phases. Phases Ⅰ and Ⅲ are brittle, while phaseⅡ is ductile. Of the three phases, phaseⅡ has the most serious degree of elastic anisotropy and phase Ⅲ has the slightest one.Finally, we investigate the partial densities of states(PDOSs) of three phases and find that the three phases possess some covalent features.     

First-principles investigations on structural,elastic, electronic properties and Debye temperature of orthorhombic Ni3Ta under pressure

The structural, elastic, electronic properties and Debye temperature of Ni₃Ta under different pressures are investigated using the first-principles method based on density functional theory. Our calculated equilibrium lattice parameters at 0 GPa well agree with the experimental and previous theoretical results. The calculated negative formation enthalpies and elastic constants both indicate that Ni₃Ta is stable under different pressures. The bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν are calculated by the Voigt–Reuss–Hill method. The bigger ratio of B/G indicates Ni₃Ta is ductile and the pressure can improve the ductility of Ni₃Ta. In addition, the results of density of states and the charge density difference show that the stability of Ni₃Ta is improved by the increasing pressure. The Debye temperature Θ _D calculated from elastic modulus increases along with the pressure.     

First-Principles Calculations of Elastic Properties of Cubic Ni2MnGa

Dependence of bulk modulus on both pressure and temperature, the elastic constants Cij and the pressure and temperature dependence of normalized volume V/Vo of cubic Ni2MnGa alloy are successfully obtained using the first-principles plane-wave pseudopotential （PW-PP） method as well as the quasi-harmonic Debye model. We analyse the relationship between bulk modulus and temperature up to 800 K and obtain the relationships between bulk modulus B and pressures at different temperatures. It is found that the bulk modulus B increases monotonically with increasing pressure. Moreover, the temperature dependences of the Debye temperature are also analysed. The calculated results are in agreement with the available experimental data and the previous theoreticM results.     

MgO高温高压特性及相变的第一性原理研究

应用第一性原理密度泛函理论计算了MgO在零温(0K)下和0~200GPa静水压范围内的晶体结构和弹性模量,以及B1、B4和B8相结构的MgO的声速随压力的变化。利用准简谐近似下的Debye模型,通过拟合三阶Birch-Murnaghan物态方程模拟了高温效应并对三个相在高温高压下的相稳定性做了研究。本工作的计算结果与前人的理论和实验结果符合较好,说明第一性原理结合准简谐Debye模型能够比较准确的模拟矿物如MgO在高温高压下的热力学性质。     

MgO高温高压特性及相变的第一性原理研究

应用第一性原理密度泛函理论计算了MgO在零温(0K)下和0~200GPa静水压范围内的晶体结构和弹性模量,以及B1、B4和B8相结构的MgO的声速随压力的变化。利用准简谐近似下的Debye模型,通过拟合三阶Birch-Murnaghan物态方程模拟了高温效应并对三个相在高温高压下的相稳定性做了研究。本工作的计算结果与前人的理论和实验结果符合较好,说明第一性原理结合准简谐Debye模型能够比较准确的模拟矿物如MgO在高温高压下的热力学性质。     

First-Principles Study of Pressure-Induced Phase Transition in CuGaO<Subscript>2</Subscript>

We have studied the structural, elastic, electronic properties, and pressure-induced phase transition of CuGaO₂ by using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory (DFT). The obtained ground state properties of three phases were in agreement with previous works. The calculated enthalpy variations with pressure showed that the structural phase transition (β → 3R/2H) appeared at 65.5 ± 1 GPa. The changes in volume and band gap of β phase showed that there was a break between 30 and 40 GPa. The independent elastic constants of three phases were calculated. The 3R, 2H, and β phases were all mechanical stability and behaved in ductile manner under zero pressure.     

Structural and elastic properties of TiN under high pressure

We have investigated the structural and elastic properties of TiN at high pressures by the first-principles plane wave pseudopotential density functional theory method at applied pressures up to 45.4 GPa. The obtained normalized volume dependence of the resulting pressure is in excellent agreement with the experimental data investigated using synchrotron radial x-ray diffraction (RXRD) under nonhydrostatic compression up to 45.4 GPa in a diamond-anvil cell. Three independent elastic constants at zero pressure and high pressure are calculated. From the obtained elastic constants, the bulk modulus, Young's modulus, shear modulus, acoustic velocity and Debye temperature as a function of the applied pressure are also successfully obtained.     

First-principles studies of structural,mechanical, electronic,optical properties and pressure-induced phase transition of CuInO2 polymorph

Using the first-principles density-functional theory within the generalized gradient approximation (GGA), we have investigated the structural, elastic, mechanical, electronic, and optical properties and phase transition of CuInO₂. Structural parameters including lattice constants and internal parameter, pressure effects and phase transition pressure were calculated. We have obtained the elastic coefficients, bulk modulus, shear modulus, Young's modulus and Poisson's ratio. We find that two phases of CuInO₂ are indirect band gap semiconductors (F–Γ and H–Γ for 3R and 2H, respectively). Optical properties, including the dielectric function, refractive index, extinction coefficient, reflectivity, absorption coefficient, loss function and optical conductivity have been obtained for radiations of up to 30 eV.     

First-principles study of the structural,elastic, mechanical,electronic, and optical properties of cubic Mg<Subscript>2</Subscript>TiO<Subscript>4</Subscript>

We have performed ab-initio total energy calculations using the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory (DFT) to study structural, elastic, mechanical, electronic, and optical properties of cubic Mg₂TiO₄. The calculated lattice parameter a is in good agreement with the experimental values. The independent elastic constants are calculated. The mechanical properties including bulk, shear and Young’s modulus, Poisson’s coefficient, compressibility and Lamé’s constants are obtained using the Voigt-Reuss-Hill method. Debye temperature is estimated using the Debye-Grüneisen model. Band structure, density of states and charge densities are shown and analyzed. In order to clarify the mechanism of optical transitions of cubic Mg₂TiO₄, the complex dielectric function, refractive index, extinction coefficient, reflectivity, absorption coefficient, loss function and complex conductivity function are calculated.     

α-Ti2Zr高压物性的第一性原理计算研究

基于密度泛函理论的第一性原理计算获得了α-Ti₂Zr的晶体结构、弹性常数、德拜温度和电子分布情况, 研究了它们与压力的关系. 计算得到的晶体结构参数与实验值一致. 运用有限应变方法计算得到了α-Ti₂Zr的体积模量B、剪切模量G、杨氏模量E和泊松比σ. B和E的零压值分别为101.2和35.6 GPa. G/B的值较小, 并且随着压力的增加而减小, 表明α-Ti₂Zr具有优异的延展性. 基于弹性常数得到平均声速, 从而获得了德拜温度Θ=321.7 K. 通过解Christoffel方程获得的压缩波和剪切波数据揭示α-Ti₂Zr具有较强的各向异性. 此外, 压力诱导电子从s轨道到d轨道的转移说明在一定压力下α-Ti₂Zr将转变为β相. 关键词： 第一性原理 α-Ti₂Zr')" href="#">α-Ti₂Zr 物性 高压