高稳定性Ni/SBA-15催化剂的结构特征及其对二氧化碳重整甲烷反应的催化性能

 采用浸渍法制备了Ni含量为2.5%～20%的系列Ni/SBA-15催化剂,在常压连续流动固定床反应器上考察了催化剂对二氧化碳重整甲烷制合成气的催化性能,并用X射线衍射和N2吸附法研究了Ni/SBA-15催化剂的结构特征. 结果表明, Ni/SBA-15催化剂具有很高的CH4和CO2转化率, 12.5%Ni/SBA-15催化剂在800 ℃反应600 h后活性没有明显下降,但反应710 h后CH4的转化率下降了约50%, CO2的转化率下降了约25%. 其活性下降的主要原因是催化剂积炭. 在高温条件下反应时, SBA-15的介孔结构也没有遭到破坏,分子筛的孔壁能有效阻止活性组分Ni的团聚. SBA-15孔中组装一定量的Ni活性组分后,除了SBA-15的介孔外,还会形成另外一种较小的孔,但这不影响SBA-15的有序介孔结构,只是其孔径、孔容和BET比表面积降低.     

介孔Ni-β-Mo2C/SBA-16催化剂在CH4/CO2重整制合成气反应中的催化性能

采用等体积浸渍将双金属活性组分负载到介孔分子筛SBA-16上,通过热分解制备了负载型催化剂Ni--Mo2C/SBA-16.N2吸附-脱附、X射线粉末衍射和透射电镜等结果表明,引入活性组分后,样品依然保持原有的有序介孔结构,活性组分高度分散于载体上,没有团聚.在CH4/CO2重整制合成气反应中,Ni--Mo2C/SBA-16催化剂具有较高的CH4和CO2转化率,以及CO和H2选择性,有明显的抗积炭作用.     

Ni/γ-Al2O3催化剂上CH4-CO2重整体系中积碳-消碳的研究

用动态热重技术和色谱技术联用以及XRD和TEM等表征手段,研究了Ni/γ-Al     

α-和γ-环糊精改性法制备的Ni/SBA-15催化剂的物化性质及其在甲烷二氧化碳重整中的催化性能

以多羟基有机物α-或γ-环糊精为分散促进剂制备了Ni/SBA-15催化剂，通过N2吸附-脱附、X射线衍射、透射电镜、程序升温还原和热重等手段对该催化剂的物理化学性质进行了表征，并将其应用于甲烷二氧化碳重整(CRM)制合成气反应。结果显示，与采用传统浸渍法制备的Ni/SBA-15催化剂相比，采用α-或γ-环糊精改性法制备的催化剂具有更小的NiO颗粒，并在CRM中显示出更高的催化活性及更强的抗积碳性能。机理研究表明，采用传统浸渍法制备Ni/SBA-15催化剂时，浸渍液中的Ni2+主要在浓度梯度的作用下逐渐进入到SBA-15孔道内部， Ni2+水合物容易团聚，分散程度较低；而采用α-或γ-环糊精改性方法制备催化剂时，在水溶液中Ni2+与环糊精形成包覆物，环糊精携带Ni2+进入SBA-15孔道内，并且环糊精的存在使得Ni2+之间相互隔离，以高度分散形态存在于SBA-15孔道表面，有利于后续热处理中NiO在载体上较好地分散。     

α-和γ-环糊精改性法制备的Ni/SBA-15催化剂的物化性质及其在甲烷二氧化碳重整中的催化性能

以多羟基有机物α-或γ-环糊精为分散促进剂制备了Ni/SBA-15催化剂,通过N2吸附-脱附、X射线衍射、透射电镜、程序升温还原和热重等手段对该催化剂的物理化学性质进行了表征,并将其应用于甲烷二氧化碳重整(CRM)制合成气反应。结果显示,与采用传统浸渍法制备的Ni/SBA-15催化剂相比,采用α-或γ-环糊精改性法制备的催化剂具有更小的NiO颗粒,并在CRM中显示出更高的催化活性及更强的抗积碳性能。机理研究表明,采用传统浸渍法制备Ni/SBA-15催化剂时,浸渍液中的Ni2+主要在浓度梯度的作用下逐渐进入到SBA-15孔道内部, Ni2+水合物容易团聚,分散程度较低;而采用α-或γ-环糊精改性方法制备催化剂时,在水溶液中Ni2+与环糊精形成包覆物,环糊精携带Ni2+进入SBA-15孔道内,并且环糊精的存在使得Ni2+之间相互隔离,以高度分散形态存在于SBA-15孔道表面,有利于后续热处理中NiO在载体上较好地分散。     

CeO_2/Ni/Mo/SBA-15甲烷二氧化碳重整催化剂的表征和催化性能(英文)

考察了CeO2修饰及未修饰的Ni/Mo/SBA-15催化剂在CH4-CO2重整上的催化性能并采用N2吸脱附、CO2程序升温脱附、H2程序升温还原、傅里叶红外光谱、X射线衍射、扫描电子显微镜和X射线光电子能谱对催化剂进行了表征.结果表明,在常压,800oC条件下,经过100h在线评价后,Ni/Mo/SBA-15和CeO2/Ni/Mo/SBA-15催化剂仍具有高的反应活性和规整的六方介孔结构,其中CeO2修饰的CeO2/Ni/Mo/SBA-15催化剂表面没有积炭形成,表明CeO2的加入促进了Ni物种在SBA-15介孔分子筛表面的分散,从而阻止了Ce/Ni/Mo/SBA-15催化剂上Ni的烧结和积炭.     

La2O3—Ni／SrAl12O19催化剂上甲烷与二氧化碳重整反应的研究

采用ＸＲＤ，ＵＶ－ＤＲＳ，Ｈ２－Ｏ２滴定，ＴＰＲ，吡啶吸附红外光谱等技术，研究了Ｌａ２Ｏ３助剂对Ｌａ２Ｏ３－Ｎｉ／ＳｒＡｌ１２Ｏ１９催化剂的还原性，表面酸性，金属镍的分散度和抗烧结能力，以及对催化甲烷与二氧化碳重整制取合成气反应性能的影响。结果表明，在负载型的镍催化剂中，添加Ｌａ２Ｏ３助剂，能够削弱金属组分与载体之间的相互作用，降低催化剂的还原性，提高金属镍在催化剂表面的分散度和在反应过程中的抗烧     

Pd掺杂的Ni催化剂表面CH4解离吸附的理论研究

使用密度泛函理论研究了Pd掺杂的Ni(111),Ni(100)和Ni(211)表面最稳定的结构,同时考察了干净的和Pd掺杂的Ni表面催化CH₄解离反应的活性.结果表明,由Pd原子取代最外层Ni原子而形成的表面Pd掺杂的Ni表面在热力学上最为稳定,亚表面Pd掺杂的Ni表面在热力学上都不稳定; 而对于表面Pd吸附的Ni表面,只有Pd/Ni(211)表面是稳定的.表面掺杂的Pd/Ni表面上CH₄解离中间体(CH₄,CH₃,CH,C,H)吸附能的计算结果表明,Pd的掺杂在不同程度上减弱了除CH₄之外各解离中间体的吸附能.另外,CH₄和CH均优先在Ni(211)和Pd/Ni(211)台阶面上解离,其次是在比较开阔的Ni(100)和Pd/Ni(100)表面上.Pd的掺杂不同程度上提高了CH₄和CH解离的能垒,对于活性最高的Ni(211)面,Pd的掺杂使得CH脱氢的能垒较CH₄脱氢的高,改变了其速率控制步骤,从而抑制了积碳的生成.     

金属改性SBA-15应用于乙醇水蒸气重整制氢的研究

采用水热法将Ce金属引入SBA-15骨架,合成一系列Ce-SBA-15（Si/Ce=40,20,10）载体,再通过浸渍法制得Co/Ce-SBA-15催化剂.利用XRD、UV-Vis、FT-IR、H₂-TPR、N₂吸附-脱附等手段对催化剂进行表征,并用于乙醇水蒸汽重整制氢反应（ESR）,考察载体骨架中Ce金属对催化剂结构和性能的影响.结果表明,水热法制备可使得Ce离子进入到SBA-15分子筛骨架,合成的载体仍保持SBA-15特有的介孔结构.与Co/SBA-15催化剂相比,基于铈的储放氧功能,Ce的加入提高了活性金属分散度,降低了反应积碳的生成,改善了催化剂稳定性.适量铈与钴的协同作用,提高了钴物种的分散度,降低了钴的烧结程度,催化剂Co/Ce-SBA-15（Si/Ce=20）具有良好的催化活性,乙醇转化率为96.6%,H₂选择性达到75.5%,反应后积碳率仅为5.6%.     

镧助剂对模拟生物沼气重整制备合成气中Ni/SBA-15催化剂结构和性能的影响

以介孔分子筛SBA-15为载体, 采用浸渍法制备了镍质量分数(w)为12.5%, 并且分别添加质量分数(w)为2.5%的镧、铈、镁、钙、锶等助剂的系列Ni基催化剂. 以CH4/CO2体积比为2:1的模拟生物沼气和适量氧气作为原料气, 在常压固定床反应器上评价了催化剂对模拟生物沼气重整制合成气的反应性能. 采用X射线粉末衍射(XRD)、N2吸附/脱附、透射电子显微镜(TEM)、X射线光电子能谱(XPS)及H2程序升温还原(H2-TPR)等对催化剂的结构进行了表征. 催化活性评价显示, 添加镧助剂的2.5%La/12.5%Ni/SBA-15催化剂比添加铈、镁、钙、锶等助剂的催化剂具有更高的催化活性, 并且具有很好的稳定性. 因此, 文中着重研究了镧助剂对催化剂结构和模拟生物沼气重整制合成气的反应性能的影响. 结果表明, 镧能明显提高Ni/SBA-15催化剂的表面镍含量, 同时还具有很好的抗积炭作用, 在850 ℃的温度下反应820 h没有发现积炭生成, 这些可能是提高催化剂性能和稳定性的重要因素.     

Rh doping effect on coking resistance of Ni/SBA-15 catalysts in dry reforming of methane

A series of SBA-15 supported bimetallic Rh–Ni catalysts with different weight ratio of Rh/Ni in the range of 0–0.04 were prepared for carbon dioxide reforming of methane. The doping effect of Rh on catalytic activity as well as carbon accumulation and removal over the catalysts was studied. The characterization results indicated that the addition of a small amount of Rh promoted the reducibility of Ni particles and decreased the Ni particle size. During the dry reforming reaction, the carbon deposition was originated from CH4 decomposition and CO disproportionation. The Rh–Ni catalyst with small metallic particle size inhibited the carbon formation and exhibited high efficiency in the removal of coke. In comparison with bare Ni-based catalyst, the Rh–Ni bimetallic catalysts showed high activity and stability in the dry reforming of methane.     

Effect of Ni Loading and CexZr1-xO2 Promoter on Ni-Based SBA-15 Catalysts for Steam Reforming of Methane

A series of Ni/SBA-15 catalysts with Ni contents ranging from 5wt% to 20wt% as well as 10wt%Ni/10wt?xZn-xO2/SBA-15 (z=0, 0.5, 1) were prepared. The structures of the catalysts were characterized using XRD, TPR, TEM and BET techniques. The catalytic activities of the catalysts for steam reforming of methane were evaluated in a continuous flow microreactor. The results indicated that both the Ni/SBA-15 and the Ni/CexZr1-xO2/SBA-15 catalysts had good catalytic activities at atmospheric pressure. The 10wt%Ni/SBA-15 catalyst exhibited excellent stability at 800癈 for time on stream of 740 h. After the reaction, carbon deposits were not formed on the surface of the catalyst. There existed a regular hexagonal mesoporous structure in the Ni/SBA-15 and the Ni/CexZr1-xO2/SBA-15 catalysts. The nickel species and the CexZr1-xO2 component were all confined in the SBA-15 mesopores. The CexZr1-xO2 could promote dispersion of the nickel species in the Ni/CexZr1-xO2/SBA-15 catalysts.     

Carbon dioxide reforming of methane over Ni/Mo/SBA-15-La2O3 catalyst: Its characterization and catalytic performance

The Ni/Mo/SBA-15 catalyst was modified by La2O3 in order to improve its thermal stability and carbon deposition resistance during the CO2 reforming of methane to syngas. The catalytic performance, thermal stability, structure, dispersion of nickel and carbon deposition of the modified and unmodified catalysts were comparatively investigated by many characterization techniques such as N2 adsorption, H2-TPR, CO2-TPD, XRD, FT-IR and SEM. It was found that the major role of La2O3 additive was to improve the pore structure and inhibit carbon deposition on the catalyst surface. The La2O3 modified Ni/Mo/SBA-15 catalyst possessed a mesoporous structure and high surface area. The high surface area of the La2O3 modified catalysts resulted in strong interaction between Ni and Mo-La, which improved the dispersion of Ni, and retarded the sintering of Ni during the CO2 reforming process. The reaction evaluation results also showed that the La2O3 modified Ni/Mo/SBA-15 catalysts exhibited high stability.     

高比表面积有序介孔Ni/SiC催化CH4-CO2重整反应

采用纳米浇铸法制备了高比表面积（345 m²/g）且孔径均一的有序介孔SiC材料（SiC-OM），以商用SiC（49 m²/g，SiC-C）材料为参比载体。采用等体积浸渍法分别制备了Ni/SiC-OM和Ni/SiC-C，并考察其在CH₄-CO₂重整反应中的催化性能。利用ICP、BET、XRD、H₂-TPR、XPS、HRTEM、TG和Raman等手段对反应前后的两种催化剂进行表征。结果表明，在700℃、1.013×10⁵ Pa和12 L/（h·g）的重整条件下，Ni/SiC-OM的平均积炭速率比Ni/SiC-C降低了一个数量级，这主要归因于强金属-载体相互作用和有序介孔骨架的"限域效应"作用。     

Yb_2O_3助剂对Ni/SiC催化剂甲烷二氧化碳重整性能的影响

采用浸渍法制备了Ni/SiC和Ni-Ybx/SiC(x=2%、4%、6%、10%,质量分数)催化剂,在固定床反应装置中考察了催化剂在甲烷二氧化碳重整反应中的性能。利用BET、ICP-AES、XRD、H2-TPR、TG-DTA、XPS和TEM等技术对催化剂进行了表征。实验结果表明,Yb的适宜添加量为4%~6%。在800℃条件下Ni-Yb4/SiC和Ni-Yb6/SiC催化剂具有优异的催化活性和稳定性,在100 h的重整反应中,甲烷和二氧化碳的转化率始终保持在90%以上。Yb2O3助剂能够抑制镍颗粒的生长和减少碳沉积量,因此,Ni-Yb/SiC催化剂在连续反应中表现出稳定的活性。     

Ni/MgO catalyst prepared using atmospheric high-frequency discharge plasma for CO2 reforming of methane

A new type of Ni/MgO catalyst was prepared using atmospheric high-frequency discharge cold plasma. The influences of conventional method, plasma method, and plasma plus calcination method on the catalytic activity were studied and the CO2 reforming of methane was chosen as the probe reaction. The catalysts were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscopy, and CO2 temperature-programmed surface reaction techniques. The results suggested that the nickel-based catalyst prepared by plasma plus calcination method possessed a smaller particle size and a higher dispersion of active component, better low-temperature activity and enhanced anti-coking ability. The conversion of CO2 and CH4 was 90.70% and 89.37%, respectively, and the reaction lasted for 36 h without obvious deactivation under 101.325 kPa and 750°C with CO2/CH4 = 1/1.     

Low-temperature utilization of CO2 and CH4 by combining partial oxidation with reforming of methane over Ru-based catalysts

Combination of partial oxidation of methane (POM) with carbon dioxide reforming of methane (CRM) has been studied over Ru-based catalysts at 550 ℃. POM, CRM and combined reaction were performed over 8wt%Ru/γ-Al2O3 and the results show that both POM and CRM contribute to the combined reaction, between which POM plays a more important role. Moreover, the addition of Ce to Ru-based catalyst results in an improvement in the activity and CO selectivity under the adopted reaction conditions. The Ce-doped catalyst was characterized by N2 adsorption-desorption, SEM, XRD, TPR, XPS and in situ DRIFTS. The mechanism has been studied by in situ DRIFTS together with the temperature distribution of catalyst bed. The mechanism of the combined reaction is more complicated and it is the combination of POM and CRM mechanisms in nature. The present paper provides a new catalytic system to activate CH4 and CO2 at a rather low temperature.     

不同助剂对CuO-ZnO/SBA-15催化CO_2加氢制甲醇性能影响的研究

以硅质骨架结构介孔分子筛SBA-15为载体,采用浸渍法合成CuO-ZnO/SBA-15(CZ/SBA-15)、CuO-ZnO-MnO_2/SBA-15(CZM/SBA-15)、CuO-ZnO-ZrO_2/SBA-15(CZZ/SBA-15)三组多孔催化剂,在固定床反应器上评价了各组催化剂催化CO_2加氢合成甲醇的性能,同时结合N_2吸附-脱附(BET)、X射线衍射(XRD)、H_2程序升温还原(H_2-TPR)、程序升温脱附(H_2-TPD、CO_2-TPD)、N_2O滴定、X射线光电子能谱(XPS)、透射电子显微镜(TEM)等表征研究了不同助剂对CO_2催化加氢制甲醇的影响。结果表明,催化剂中的金属氧化物改变了SBA-15分子筛载体的孔径大小和比表面积;催化剂CuO-ZnO-MnO_2/SBA-15、CuO-Zn O-ZrO_2/SBA-15中铜的分散度(D_(Cu))和比表面积(A_(Cu))更大,表面CuO粒径更小,更易被还原;相比Mn-O簇,Zr-O簇为增强了碱性位点,提高了甲醇选择性。此外,CuO-ZnO-ZrO_2/SBA-15具有更高的氧空位浓度,催化活性更好,其甲醇选择性为25.02%,与CuO-ZnO/SBA-15、CuO-ZnO-Mn O_2/SBA-15相比分别提高了28%和136.9%,催化效果最好。