Formation and spectra of clathrate hydrates of methanol and methanol-ether mixtures

Infrared spectra of mixed clathrate hydrates, with either ethylene oxide (EO) or tetrahydrofuran (THF) and methanol molecules as the guest species, have been obtained from thin films prepared by vapor deposition of D₂O mixtures in the 115–130 K range. Although methanol acts as a suppressant to the direct vapor deposition of a type I clathrate with EO, nearly complete conversion of 115 K amorphous codeposits, to the crystalline mixed clathrate, occurs upon warming near 150 K. By contrast, the type II clathrate of THF shows an increased crystalline quality when methanol is included in the vapor deposits of the mixed clathrate hydrate at 130 K. The observation of the O---D stretch-mode band of weakly bonded CD₃OD near 2575 cm⁻¹ is part of the evidence that the methanol molecules are encaged. However, as shown theoretically by Tanaka, the clathrate hydrates of methanol, even when mixed with an ether help gas, are not stable structures but form at low temperatures because of kinetic factors, only to decompose in the 140–160 K range. Attempts to prepare a simple type I or type II clathrate hydrate of methanol have produced mixed results. Limited amounts of clathrate hydrate form during deposition but annealing does not result in complete conversion to crystalline clathrates, particularly for host : guest ratios of 17 : 1.     

Thick porous tungsten trioxide films by anodization of tungsten in fluoride containing phosphoric acid electrolyte

In the present work, we report on the formation of mesoporous thick tungsten trioxide films grown on tungsten foil by anodization in fluoride containing concentrated phosphoric acid (85%) electrolyte. Under optimized experimental conditions, mesoporous WO₃ films with a thickness up to approximately 2 μm are formed. SEM shows the films to consist of a connected network with a typical pore and feature diameter of ca 50 nm. These films as formed are amorphous and can be annealed to orthorhombic WO₃ structure. These thick porous films can show significant enhanced electrochromic and improved photocatalytic properties.     

The crystal structure of 3-methyluracil from X-ray powder diffraction data

The crystal structure of 3-methyluracil has been determined ab initio by conventional monochromatic X-ray powder diffraction data. The crystal data are: orthorombic, a=6.6294(1), b=13.1816(3), c=6.53938(9) (Å), V=571.45(3) (ų), space group Pbnm, Z=8. The structure was solved by direct methods and the final Rietveld refinement converged to R_p=0.0398, R_wp=0.0528, R_Bragg=0.0294. The crystal structure exhibits endless chains of planar molecules, connected via head-to-tail N-H?O hydrogen bonds.     

红外光谱法对六氟磷酸锂的快速定量分析

本文建立了一种用傅里叶红外光谱(FT-IR)法快速定量分析LiPF6的方法。采用红外光谱(IR)法和X射线衍射(XRD)法对LiPF6样品进行了定性分析。选取LiPF6红外光谱847cm-1处的特征吸收峰为分析对象,利用吸光度峰面积积分法进行定量分析,由标准曲线可知,LiPF6的含量与其红外光谱特征峰的吸收强度有很好的线性关系,相关系数达0.9998,线性范围在0.04～25mg.mL-1,检出限可达0.02mg.mL-1。LiPF6样品定量测定的相对标准偏差(RSD)约为0.18%,回收率为96%～98%。     

Spectroscopic and structural studies on metal halide complexes of 4-vinylpyridine

Fourier transform infrared spectra (4000–400 cm⁻¹) are reported for metal(II) halide 4-vinlypridine complexes of the following stoichiometries: [MX₂(4-vipy]_n (n=4, M=Ni, X=Cl or Br; n=2, M=Cd, X=Cl, Br or I) and assignment are given for all the observed bands. These spectra were compared with X-ray powder diffraction patterns of complexes. It is shown that the proposed structures for these complexes derived from FTIR spectra are consistent with the X-ray powder diffraction measurements and the elemental analysis results. Coordination effect on 4-vinylpyridine has also been investigated.     

Electrochemical lithium intercalation into WO3 and lithium tungstates Li x WO3+ x /2 of various structures

Hexagonal and monoclinic tungsten trioxides WO₃ and hexagonal lithium tungstates Li _x WO_{3+ x /2} (x = 0.10–0.42) from a soft chemistry route were used as the active cathode material in secondary lithium batteries. The hexagonal structures, regardless of their being an oxide or a tungstate, showed higher specific capacities and better cycling behavior in Li⁺ intercalation reactions than the monoclinic form. The presence of pre-allocated lithium (as Li₂O) in hexagonal tungstates decreased the capacity for lithium intercalation. Additionally, the plot of open-circuit voltage (OCV) against the depth of intercalation (n) for anhydrous tungstates showed two straight lines with different slopes that can be related to the structural changes in lithium intercalation. The effective diffusion coefficients of lithium insertion into the host structure, D˜, were also found to be dependent on the structure and the composition of these compounds. Received: 28 November 1997 / Accepted: 6 March 1998     

Electrocatalysis of oxygen reduction and hydrogen oxidation in platinum dispersed on tungsten carbide in acid medium

Tungsten carbide dispersed on a high surface area carbon (W₂C/C) prepared by a sonochemical method was used as the support of a Pt-based electrocatalyst (Pt-W₂C/C). The resulting materials were tested for two important reactions with practical interest in fuel cells, that is, the oxygen reduction and hydrogen oxidation reactions, in acid medium. The electrochemical techniques considered were cyclic voltammetry, linear sweep voltammetry, and steady-state polarization curves, obtained utilizing an ultrathin catalyst layer in a rotating ring–disk electrode. The results showed that the Pt-W₂C/C catalyst led to a remarkable enhancement of the oxygen reduction in acid medium, when compared to the standard Pt/C, both following a four-electron mechanism. The hydrogen oxidation reaction showed similar kinetics on Pt-W₂C/C and Pt/C following the direct discharge mechanism on both catalysts. The W₂C/C support presented remarkable activity for the hydrogen oxidation reaction, most probably after the Heyrovsky–Volmer mechanism at low overpotential and the direct discharge irreversible mechanism at high overpotentials. This paper is dedicated to Prof. Francisco Nart, in memoriam.     

Competitive cage occupancy of hydrogen and argon in structure-II hydrates

The cage occupancy of hydrogen in the single-crystals of simple hydrogen hydrates and hydrogen + argon mixed-gas hydrates was investigated by means of in situ Raman spectroscopy under the three-phase (hydrate + water + fluid) equilibrium condition. In the equilibrium pressure region higher than approximately 25 MPa, four hydrogen cluster and argon competitively occupied the large cages of structure-II hydrogen + argon mixed-gas hydrates. In addition, Raman spectroscopic analysis at liquid nitrogen temperature (77 K) supports that the clusters of two, three, or four hydrogen molecules occupy large cages.     

Spectroscopic and structural analysis of Ca substituted La orthoferrite

Samples of orthoferrites La_1−xCa_xFeO₃ (0.15≤x≤0.45) were synthesized by double sintering ceramic technique. X-ray diffraction and infrared spectroscopy experiments were carried out and discussed for the investigated samples. The data showed the formation of single-phase orthorhombic structure of space group Pbnm. The FTIR spectra were performed in the region (1200–200 cm⁻¹). Four main absorption bands were present with some side bands and shoulders in the range (1200–400 cm⁻¹). Another four bands were appeared in the range (400–200 cm⁻¹). The positions, intensities and values of the absorptions bands vary depending on the Ca content in the samples. The first absorption band appeared at about 920 cm⁻¹ was assigned to the La–O stretching vibration.     

Thermal stability of hexagonal tungsten trioxide in air

We studied the thermal stability of different hexagonal tungsten trioxide, h-WO₃ samples, which were prepared either by annealing hexagonal ammonium tungsten bronze, (NH₄)_0.33−xWO_3−y, or by soft chemical synthesis from Na₂WO₄. The structure and composition of the samples were studied by powder XRD, SEM-EDX, XPS and ¹H-MAS NMR. The thermal properties were investigated by simultaneous TG/DTA, on-line evolved gas analysis (TG/DAT-MS), SEM and in situ powder XRD. The preparative routes influenced the thermal properties of h-WO₃ samples, i.e. the course of water release, the exothermic collapse of the hexagonal framework and the phase transformations were all affected.     

Influence of coordination on N-H X hydrogen bonds. Part II. Zn(NH3)2Br2 and Ni(NH3)2X2 (X is Cl and Br)

Microcrystalline samples of Zn(NH₃)₂Br₂ and Ni(NH₃)₂X₂ (X is Cl⁻ and Br⁻) have been investigated from 100 to 293 K using X-ray diffraction and IR spectroscopy measurements (range 400–4000 cm⁻) performed with isotopically dilute (5% deuterated) samples. Values of Δν(ND)/ΔT for all compounds hint at the existence of hydrogen bonds. Zn(NH₃)₂Br₂ shows The dynamics of ammonia molecules even at 100 K, and no indications are apparent that dynamic disorder of ammonia molecules takes place in Ni(NH₃)₂X₂ (X is Cl⁻ and Br⁻). A comparison between octahedrally coordinated ammoniates [Ni(NH₃)₆]Br₂, Ni(NH₃)₂Br₂ and [Zn(NH₃)₆]Br₂ with tetrahedrally coordinated ones [Zn(NH₃)₂Br₂] leads to the conclusion that the lower coordination number increases the strength of the hydrogen bonds. Because this effect is small, it is not possible to separate the influence of the type of coordinating ions for one coordination number from the influence of the coordination number itself.     

Infrared spectroscopic study of microwave-sintered Pb(Zr,Ti)O<Subscript>3</Subscript>-based ceramics

Infrared spectroscopy is often used to monitor the formation of the perovskite phase during the preparation of lead zirconate titanate (PZT) thin films and fibres and also to detect phase transitions. Infrared spectroscopy has rarely been used to investigate bulk samples or thick films of PZT. In this study, the first results of infrared investigations of microwave-sintered PZT and PZT reinforced with powdered copper are presented and compared with results from thermally heated samples. The infrared spectra show the typical Zr/TiO₆ metal–oxygen octahedral vibrational modes in the range 750 to 450 cm⁻¹. This band is broadened for the pure PZT samples at higher sintering temperatures. A shift of the peak to lower wave numbers with increasing temperatures can be proven for pure PZT samples, but not for the Cu-reinforced PZT samples.     

High-pressure studies of the hydrogen bond networks in molecular crystals

This article gives some examples of using high-pressure techniques to study hydrogen bond networks in molecular crystals.     

X-ray diffraction analysis and spectral studies of new derivatives of pyrazol-5-one

The molecular and crystal structures of 4-acetamido-2,3-dimethyl-1-phenylpyrazol-5-one (1) and 4-maleylamido-2,3-dimethyl-l-phenylpyrazol-5-one (2) were studied. The molecular conformations are stabilizedvia systems of intermolecular hydrogen bonds between the amide groups and the carbonyl oxygen atoms of the pyrazolone rings. The conformation of compound 2 is additionally stabilizediva an intramolecular interaction between the carboxyl group and the amide oxygen atom. According to the IR spectral data, protonation of the compounds under study in an acetonitrile solution occurs at the carbonyl oxygen atom of the pyrazolone ring, which is also confirmed by the UV spectral data. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1286–1292, July, 1999.     

基于胶束插层方法制备高热稳定性和大层间距有机化蒙脱土

采用不同方法制备了多种有机化蒙脱土,并分别采用X射线衍射仪、红外光谱分析仪、热重分析仪、电感耦合等离子体发射光谱仪、元素分析仪、扫描电子显微镜对产物进行了表征,并提出了有机物插层新方式——胶束插层.结果表明:适量钠基蒙脱土(Na-MMT)、十六烷基三甲基溴化铵(CTAB)和磷酸三苯酯(TPP)在丙酮/水的混合溶剂中进行溶液插层,得到的有机化蒙脱土具有更大的层间距,比单纯采用CTAB的插层效果显著.产物中含有约21.54%的CTAB和17.47±1.05%的TPP,插层机理为CTAB-TPP胶束插层.该有机化蒙脱土的初始热降解温度比单纯CTAB插层蒙脱土最多提高了17.4℃.采用该方法制备的改性蒙脱土既可以进一步提高蒙脱土的层间距,又可以封闭TPP于MMT的片层间,阻止TPP挥发;同时克服季铵盐改性蒙脱土的热稳定性低的问题,得到了层间距大、热稳定性高的有机化蒙脱土,为有机化蒙脱土在高熔点聚合物改性方面提供了条件.     

Possibilities and limitations of synchrotron X-ray powder diffraction with double crystal and double multilayer monochromators for microscopic speciation studies

The performance of a combined microbeam X-ray fluorescence/X-ray powder diffraction (XRF/XRPD) measurement station at Hamburger Synchrotronstrahlungslabor (HASYLAB) Beamline L is discussed in comparison to that at European Synchrotron Radiation Facility (ESRF) ID18F/ID22. The angular resolution in the X-ray diffractograms is documented when different combinations of X-ray source, optics and X-ray diffraction detectors are employed. Typical angular resolution values in the range 0.3–0.5° are obtained at the bending magnet source when a ‘pink’ beam form of excitation is employed. A similar setup at European Synchrotron Radiation Facility beamlines ID18F and ID22 allows to reach angular resolution values of 0.1–0.15°. In order to document the possibilities and limitations for speciation of metals in environmental materials by means of Hamburger Synchrotronstrahlungslabor Beamline L X-ray fluorescence/X-ray powder diffraction setup, two case studies are discussed, one involved in the identification of the crystal phases in which heavy metals such as chromium, iron, barium and lead are present in polluted soils of an industrial site (Val Basento, Italy) and another involved in the speciation of uranium in depleted uranium particles (Ceja Mountains, Kosovo). In the former case, the angular resolution is sufficient to allow identification of most crystalline phases present while in the latter case, it is necessary to dispose of an angular resolution of ca. 0.2° to distinguish between different forms of oxidized uranium.     

Synthesis and characterization of copper 4-carboxyphenylphosphonates

Three new copper 4-carboxyphenylphosphonates with formulae Cu(HOOCC₆H₄PO₃)·2H₂O, Cu(HOOCC₆H₄PO₃) and Cu₃(OOCC₆H₄PO₃)₂·3H₂O were prepared and characterized by thermogravimetric analysis, X-ray diffraction analysis, energy-dispersive X-ray microanalysis and infrared spectroscopy. The preparation conditions of Cu(HOOCC₆H₄PO₃)·2H₂O and Cu₃(OOCC₆H₄PO₃)₂·3H₂O differ in the acidity of the reaction mixture, where Cu(HOOCC₆H₄PO₃) was prepared under hydrothermal conditions. Copper 4-carboxyphenylphosphonate with formula Cu₃(OOCC₆H₄PO₃)₂·3H₂O reacts with 4-carboxyphenylphosphonic acid to form Cu(HOOCC₆H₄PO₃)·2H₂O.Cu(HOOCC₆H₄PO₃)·2H₂O is orthorhombic, space group Pbcn (no. 60), a=8.234(2) Å, b=9.438(2) Å, c=24.899(5) Å. Cu(HOOCC₆H₄PO₃) crystallizes in the monoclinic space group P2₁/c (no. 14), a=19.0951(3), b=8.0968(4), c=5.2111(11) Å, β=94.914(6)°, Z=4. Its layered structure is composed of distorted CuO₆ octahedra arranged hexagonally in a gibbsite-like manner around two phosphonate groups, which have their carboxyphenyl groups extending into the space above and below the copper–phosphonate layer. Infrared spectra indicate that for both Cu(HOOCC₆H₄PO₃)·2H₂O and Cu(HOOCC₆H₄PO₃) the acid hydrogen is present at the carboxyl group and not at the phosphonic group.     

钽内标X射线荧光光谱法测定钨精矿中WO_3

提出了以钽为内标波长色散X射线荧光光谱法测定钨精矿中WO3的新方法。以Na2B4O7和Li2B4O7(质量比65:35)的混合物作为熔剂,Ta2O5为内标,同时加入LiNO3为氧化剂,在1200℃下进行熔融制样,最后将本方法应用于实际样品的分析,结果表明,以钽作为内标测定WO3,不仅可以在很大程度上降低实验操作和仪器测量带来的偏差,也可以消除基体效应的影响。方法用于测定白钨精矿和黑钨精矿中WO3,其准确度和精密度优于重量分析法。