Nonlinear optical properties of [（CH3）4N]Au（dmit）2 using Z-scan technique

The third-order optical nonlinearities of [（CH3）4N]Au（dmit）2 （dmit = 4,5-dithiolate-1,3-dithiole-2-thione） at 532 nm and 1064 nm are investigated using the Z-scan technique with pulses of picoseconds duration. The Z-scan spectra reveal a strong nonlinear absorption （reverse saturable absorption） and a negative nonlinear refraction at 532 nm. No nonlinear absorption is observed at 1064 nm. The molecular second-order hyperpolarizability γ for the [（CH3）4N]Au（dmit）2 molecule at 532nm is estimated to be as high as （2.1 ±0.1） × 10^-31 esu, which is nearly three times larger than that at 1064 nm. The mechanism responsible for the difference between the results is analysed. Nonlinear transmission measurements suggest that this material has potential applications in optical limiting.     

Investigation on the third order nonlinearity of some organic charge-transfer complexes

The degenerate four wave mixing experiments have been performed in the N, N-dimethylformamide solutions of 3, 4, 9, 10-Tetramethylperylene (TMP) · AsF_6 and (TMP) · PF_6, respectively. The result showed that the two complexes have large nonlinear optical response.     

Ultrafast third-order optical nonlinearity of several sandwich-type phthalocyaninato and porphyrinato europium complexes

The third-order optical nonlinearity of two sandwich-type phthalocyaninato and porphyrinato europium com- plexes, including double- and triple-deckers （Eu[Pc（OC5H11）8]2, Eu2（Pc）（TPP）2, Pc=phthalocyanine, TPP=5, 10, 15, 20- tetraphenylporphyrinate）, was investigated by using the femtosecond time-resolved optical Kerr gate method at 830 nm wavelength. Their second-order hyperpolarizability is estimated to be 0.74× 10^-30esu and 3.0× 10^-3esu respectively. This exhibits an evident enhancement in comparison with 0.47×10^-30esu for one-decker Eu（Pc）（acac） （acac=acetylacetonate）, which is also measured under the same conditions. The enhancement is attributed to the introduction of lanthanide metal to the large π-conjugated system, intermacrocycle interaction and two-photon resonance etc.     

Synthesis and third-order nonlinear optical property of poly（urethane-imide）

The poly（urethane-imide） （PUI） which uses isophorone diisocyanate, dispersed red 19 （DR-19）, and py- romellitic dianhydride is synthesized. The PUI is characterized by Fourier transform infrared （FT-IR） spectroscopy, differential scanning calorimetry （DSC）, and thermogravimetric analysis （TGA）. The results of DSC and TGA indicate that the PUI exhibits high thermal stability up to its glass-transition temperature of 209 ℃ and 5° heat weight loss temperature of 296℃. The fluorescence spectra of PUI and DR-19 are measured, showing that the fluorescence effect of PUI is very similar to that of DR-19 except for the light decrease of fluorescence intensity, which indicates that the fluorescence effect of PUI is generated by the azobenzene groups in its macromolecular chains. The maximum molar absorption coefficient, absorp- tion wavelength, and chromophores density are measured and used to calculate the third-order nonlinear optical coefficient X（3） to be 3.96×10^-13 esu. The nonlinear refractive index coefficient and molecular hyperpolarizabilitv of PUI are also obtained. PUI is oroved to have an excellent ootical Performance.     

Large third—order optical nonlinearity in Au nanomeytre particle doped BaTiO3 composite films near the resonant frequency

Nanometre-sized gold particles embedded in BaTiO₃ composite thin films (Au/BaTiO₃) were fabricated by the pulsed laser deposition technique. The films were grown on MgO (100) substrates at 700℃. The crystalline property of the films was studied with x-ray diffraction. X-ray photoelectron spectroscopy was used to check the Au composition and chemical nature for the deposited films. The absorption peak due to the surface plasmon resonance of Au particles was observed at the wavelength of about 570 nm, which increased as the metal particle size was increased. The nonlinear optical properties of the Au/BaTiO₃ films were determined using the z-scan method at the wavelength of 532 nm, which was close to the resonant frequency. The real and imaginary parts of the third-order nonlinear susceptibility χ⁽³⁾ at an Au concentration of about 6.7 at.% were determined to be 6.62×10^-7 esu and -6.24×10^-8 esu, respectively. The films showed a very large absorption, masking the nonlinear refraction effect at high metal concentrations.     

Propagation of light in （2＋1）-dimensional nonlinear optical media with spatially inhomogeneous nonlinearities

The （2＋1）-dimensional nonlinear SchrSdinger （NLS） equation with spatially inhomogeneous nonlinearities is investigated, which describes propagation of light in （2＋1）-dimensional nonlinear optical media with inhomogeneous nonlinearities. New types of optical modes and nonlinear effects in optical media are presented numerically. The results reveal that the regular split of beam can be obtained in （2＋1）-dimensional nonlinear optical media with inhomogeneous nonlinearities, by adjusting the guiding parameter. Furthermore, the stability of beam regular split is discussed numerically, and the results reveal that the beam regular split is stable to the finite initial perturbations.     

不同链长二元分子卟啉酞菁（TTP－O－（CH_2）_n－O－Pc的三阶光学非线

利用简并四波混频（ＤＦＷＭ）方法测量二元分子卟啉酞菁的三阶非线性极化系数Ｘ（３）值．得到二元分子卟啉酞菁的ｘ（３）值比它们单元分子卟啉、酞菁的ｘ（３）值大；二元分子卟啉酞菁的ｘ（３）值起初是随链长的增加而增加，链长增至ｎ＝３时，ｘ（３）值达到最大值．当链长进一步增加时，二元分子卟啉酞菁的ｘ（３）值反而下降．这同二元分子中卟啉、酞菁分子由柔性链连接有关．本文对结果给出可能的解释．     

First-principles study on the electronic structure and optical properties of T12Cd2（SO4）3 and Rb2Cd2（SO4）3

With the help of ab initio full-potential linearized augmented plane wave （FPLAPW） method, calculating the electronic structure and linear optical properties is carried out for XCd2（SO4）3 （X =Tl, Rb）. The results show that Tl2Cd2（SO4）3 （TlCdS） has a larger band gap than Rb2Cd2（SO4）3 （RbCdS） and the energy bands for RbCdS are more dispersive than those of TlCdS. From their partial densities of states （PDOS）, we have observed that the hybridization between S ionic 2p and O atomic 2p orbitals forms SO4 ionic groups. The remarkable difference between RbCdS and TlCdS is, however, the degree of hybridization between cation （Tl and Rb） and its surrounding oxygen atoms. In the view of quantum chemistry, the strong p-d hybridization indicates the existence of their cation ionic bonds （Cd-O, Rb-O, and Tl-O）. The calculations of TlCdS and RbCdS show their optical properties to be less anisotropic. Their anisotropies in the optical properties mainly occur in a low photon energy region of 5-16 eV.     

Electronic structure and optical properties of LiXH3 and XLiH3 （X= Be,B or C）

The equilibrium lattice constant, the cohesive energy and the electronic properties of light metal hydrides LiXH3 and XLiH3 （X = Be, B or C） with perovskite lattice structures have been investigated by using the pseudopotential plane-wave method. Large energy gap of LiBeH3 indicates that it is insulating, but other investigated hydrides are metallic. The pressure-induced metallization of LiBeH3 is found at about 120 GPa, which is attributed to the increase of Be-p electrons with pressure. The electronegativity of the p electrons of X atom is responsible for the metallicity of the investigated LiXH3 hydrides, but the electronegativity of the s electrons of X atom plays an important role in the metallicity of the investigated XLiH3 hydrides. In order to deeply understand the investigated hydrides, their optical properties have also been investigated. The optical absorption of either LiBeH3 or BeLiH3 has a strong peak at about 5 eV, showing that their optical responses are qualitatively similar. It is also found that the optical responses of other investigated hydrides are stronger than those of LiBeH3 and BeLiH3 in lower energy ranges, especially in the case of CLiH3.     

Ge-Ga-Cd硫化物玻璃的超快三阶非线性光学性质与结构关系研究

本文采用飞秒时间分辨光学克尔门技术测量了GeS2-Ga2S3-CdS硫化物玻璃体系的超快三阶非线性光学响应，所用激光波长分别为820nm和640nm。?实验结果证明了GeS2-Ga2S3-CdS组分玻璃具有很大的飞秒超快三阶非线性光学响应，另外，其Kerr信号随摩尔组分的不同呈显著变化。通过拉曼光谱结构分析，探讨了此系列硫化物玻璃的三阶非线性光学性质与结构的关系，结果表明构成玻璃网络的四面体结构单元[GeS4]([GaS4])对其超快三阶光学非线性起重要作用。实验还表明了此硫化物玻璃体系的超快三阶非线性不符合半经验的Miller定律。     

GeS2-Ga2S3-CsCl玻璃的三阶非线性光学性能研究

用传统的熔融急冷法制备了组分为(100-2x) GeS₂-xGa₂S₃-xCsCl (x= 15, 20, 25 mol%)系列硫卤玻璃, 测试了样品玻璃的吸收光谱. 采用Z-扫描方法测试了样品的三阶非线性光学特性. 分析了激光光子能量与玻璃三阶非线性光学特性的关系,并研究了组分变化对玻璃的三阶非线性性能的影响. 研究结果表明,光子能量的少许改变可以使非线性吸收系数在一个较大的范围内变化,随着光子能量的增大, 玻璃的非线性吸收系数β 增大;当光子能量趋近于0.5E_g时, β值趋近于0,玻璃有最佳的品质因子; 玻璃样品中CsCl含量的增加使得玻璃的光学带隙E_g增大,短波截止边蓝移,非线性吸收系数β 减小. 但是由于结构与带隙对光学非线性的影响相反,非线性折射率γ 值变化不大. 该结果表明样品的光学非线性性能由光学带隙和结构两方面因素共同决定,对今后研究全光开关用硫系玻璃具有一定的指导意义和参考价值.     

Study on the structure dependent ultrafast third-order optical nonlinearity of GeS2–In2S3 chalcogenide glasses

The results of the femtosecond time-resolved optical Kerr at 820 nm in GeS₂–In₂S₃ chalcogenide glasses indicate that the response time in GeS₂–In₂S₃ glasses is subpicosecond, which is predominantly due to the distortion of the electron cloud. The value of χ⁽³⁾ in 0.95GeS₂–0.05In₂S₃ glass is also as large as 2.7 × 10⁻¹³ esu, and it reduces with the addition of In₂S₃, which may be ascribed to the microstructure evolution of GeS₂–In₂S₃ glasses. It is deduced that the intrinsic [Ge(In)S₄] tetrahedral structure units that possess the high hyperpolarizability may do great contribution to the enhancement of third-order optical nonlinearity while [S₃Ge–GeS₃] ethane-like molecular units make no considerable contribution to that in femtosecond time scale. These GeS₂–In₂S₃ and GeS₂–In₂S₃-based chalcogenide glasses would be expected to be the promising materials for all-optical switching devices.     

Third-order nonlinearity and optical limiting of dichloromethane solutions of cis-Mo(CO)4(PPh3)2

Oxidized dichloromethane solutions of cis-Mo(CO)₄(PPh₃)₂ stabilized by the addition of excess PPh₃ exhibit unusual large molecular second-order hyperpolarizabilities with minimal linear absorption. To better understand the mechanism by which this occurs, DFWM, Z-scan and optical limiting experiments have been carried out on oxidized dichloromethane solutions of cis-Mo(CO)₄(PPh₃)₂ using 5.8 ns laser pulses at 532 nm. Our results demonstrate that the mechanism by which the oxidized species enhance the third-order nonlinear response is not dominated by thermal effects, but is instead due to the strong nonlinear absorption and nonlinear refraction of the oxidized species. Moreover, the oxidized species shows very strong optical limiting properties. Such complexes would be very interesting third-order nonlinear optical materials for optical limiting applications.     

Thermoelectric power of TTF[Ni(dmit)2]2

The 1D organic salt TTF[Ni(dmit)₂]₂ becomes superconductor with T_c=1.6 K under an applied hydrostatic pressure of 7 kbar. Structural determinations in this system lead us to suspect that superconductivity (SC) coexists with a charge density wave (CDW) instability at low pressure. In order to better understand how SC emerge from a CDW and to revisit the pressure–temperature phase diagram of the TTF[Ni(dmit)₂]₂ we performed transport and thermoelectric power measurements under pressure.     

希夫碱配合物M3L3(NO3)6(H3O)2的合成与光谱性质

以4-氨基-1,2,4-三氮唑与对二甲氨基苯甲醛为原料, 在冰醋酸催化下合成了配体4-氨基-1,2,4-三氮唑缩对二甲氨基苯甲醛（L）。 然后利用L与过渡金属硝酸盐［M(NO3)2·xH2O(M=Cu,　Co,　Zn,　Cd; x=3～6)］在无水乙醇中反应, 制得固态配合物M3L6(NO3)6(H2O)2。 通过元素分析、 红外光谱、 紫外光谱、 荧光光谱等手段对合成的配体及配合物进行了表征。 实验结果表明, 该物质是一种多晶粉末状的发光材料,　在紫外光的激发下,　在乙醇溶液体系中的荧光发射峰在416 nm处,　为蓝色荧光, 色纯度高,　荧光量子效率高, 而配合物M3L6(NO3)6(H2O)2的荧光发射峰则红移至445 nm左右, 同时荧光强度显著增强。　M3L6(NO3)6(H2O)2中与M(Ⅱ)发生配位作用的基团是配体中三氮唑环上的氮原子。     

Improved GaSb surfaces using a (NH4)2S/(NH4)2S04 solution

Bulk (1 0 0) n-GaSb surfaces have been treated with a sulphur based solution ((NH₄)₂S/(NH₄)₂SO₄) to which sulphur has been added, not previously reported for the passivation of GaSb surfaces. Au/n-GaSb Schottky barrier diodes (SBDs) fabricated on the treated material show significant improvement compared to that of the similar SBDs on the as-received material as evidenced by the lower ideality factor (n), higher barrier height (?_b) and lower contact resistance obtained. Additionally, the reverse leakage current, although not saturating, has been reduced by almost an order of magnitude at −0.2 V. The sample surfaces were studied by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The native oxide, Sb–O, present on the as-received material is effectively removed on treating with ([(NH₄)₂S/(NH₄)₂SO₄]+S) and (NH₄)₂S. Analysis of the as-received surface by XPS, prior to and after argon sputtering, suggests that the native oxide layer is ≤8.5 nm.