Anion exchange reaction potentials as approximate estimates of the relative thermodynamic stabilities of Mg/Al layered double hydroxides containing different anions

Coatings of hydrotalcite-like nitrate-intercalated Mg/Al layered double hydroxides are electrochemically deposited on a Pt electrode by electrogeneration of base by reduction of a mixed metal nitrate aqueous solution. As-prepared coatings are stable to workup and function as rugged electrodes. The voltammetric response generated by anion exchange of intercalated nitrate for dissolved anions from solution under equilibrium conditions is employed to estimate the thermodynamic stabilities of the Mg/Al layered double hydroxides comprising different anions relative to the nitrate-containing phase. Among monovalent anions, the most stable is the fluoride-containing LDH (ΔG° = -48.7 kJ mol(-1)) relative to the nitrate-containing LDH. The stability in aqueous phase decreases as F(-) > Cl(-) > Br(-) > NO(2)(-) > NO(3)(-), whereas, among divalent anions, SO(4)(2-) (ΔG° = -8.7 kJ mol(-1)) > CO(3)(2-) (ΔG° = 14.3 kJ mol(-1)). The results of monovalent ions match well with the Miyata series, whereas the divalent anion series is at variance with the commonly held belief that carbonate-LDHs are more stable than sulfate-LDHs.     

Anion-dependent formation of helicates versus mesocates of triple-stranded M2L3 (M = Fe2+, Cu2+) complexes

A series of dinuclear triple-stranded complexes, [Fe(2)L(3)?X]X(6) [X = BF(4)(-) (1), ClO(4)(-) (2)], [Fe(2)L(3)?SO(4)](2)(SO(4))(5) (3), [Fe(2)L(3)?Br](BPh(4))(6) (4), Fe(2)L(3)(NO(3))Br(6) (5), and [Cu(2)L(3)?NO(3)](NO(3))(6) (6), which incorporate a central cavity to encapsulate different anions, have been synthesized via the self-assembly of iron(II) or copper(II) salts with the N,N'-bis[5-(2,2'-bipyridyl)methyl]imidazolium bromide (LBr) ligand. X-ray crystallographic studies (for 1-4 and 6) and elemental analyses confirmed the cagelike triple-stranded structure. The anionic guest is bound in the cage and shows remarkable influence on the outcome of the self-assembly process with regard to the configuration at the metal centers. The mesocates (with different configurations at the two metal centers) have formed in the presence of large tetrahedral anions, while helicates (with the same configuration at both metal centers) were obtained when using the relatively smaller spherical or trigonal-planar anions Br(-) or NO(3)(-).     

Subtle role of polyatomic anions in molecular construction: structures and properties of AgX bearing 2,4'-thiobis(pyridine) (X(-) = NO(3)(-), BF(4)(-), ClO(4)(-), PF(6)(-), CF(3)CO(2)(-), and CF(3)SO(3)(-))

Studies on the subtle effects and roles of polyatomic anions in the self-assembly of a series of AgX complexes with 2,4'-Py(2)S (X(-) = NO(3)(-), BF(4)(-), ClO(4)(-), PF(6)(-), CF(3)CO(2)(-), and CF(3)SO(3)(-); 2,4'-Py(2)S = 2,4'-thiobis(pyridine)) have been carried out. The formation of products appears to be primarily associated with a suitable combination of the skewed conformers of 2,4'-Py(2)S and a variety of coordination geometries of Ag(I) ions. The molecular construction via self-assembly is delicately dependent upon the nature of the anions. Coordinating anions afford the 1:1 adducts [Ag(2,4'-Py(2)S)X] (X(-) = NO(3)(-) and CF(3)CO(2)(-)), whereas noncoordinating anions form the 3:4 adducts [Ag(3)(2,4'-Py(2)S)(4)]X(3) (X(-) = ClO(4)(-) and PF(6)(-)). Each structure seems to be constructed by competition between pi-pi interactions of 2,4'-Py(2)S spacers vs Ag.X interactions. For ClO(4)(-) and PF(6)(-), an anion-free network consisting of linear Ag(I) and trigonal Ag(I) in a 1:2 ratio has been obtained whereas, for the coordinating anions NO(3)(-) and CF(3)CO(2)(-), an anion-bridged helix sheet and an anion-bridged cyclic dimer chain, respectively, have been assembled. For a moderately coordinating anion, CF(3)SO(3)(-), the 3:4 adduct [Ag(3)(2,4'-Py(2)S)(4)](CF(3)SO(3))(3) has been obtained similarly to the noncoordinating anions, but its structure is a double strand via both face-to-face (pi-pi) stackings and Ag.Ag interactions, in contrast to the noncoordinating anions. The anion exchanges of [Ag(3)(2,4'-Py(2)S)(4)]X(3) (X(-) = BF(4)(-), ClO(4)(-), and PF(6)(-)) with BF(4)(-), ClO(4)(-), and PF(6)(-) in aqueous media indicate that a [BF(4)(-)] analogue is isostructural with [Ag(3)(2,4'-Py(2)S)(4)]X(3) (X(-) = ClO(4)(-) and PF(6)(-)). Furthermore, the anion exchangeability for the noncoordinating anion compounds and the X-ray data for the coordinating anion compounds establish the coordinating order to be NO(3)(-) > CF(3)CO(2)(-) > CF(3)SO(3)(-) > PF(6)(-) > ClO(4)(-) > BF(4)(-).     

Role of anions in the synthesis of cyclobutane derivatives via [2 + 2] cycloaddition reaction in the solid state and their isomerization in solution

trans-3-(4'-Pyridyl)acrylic acid (4-PA) is inert to photodimerization reaction both in solution and solid state. It is made photoreactive by forming salts with various acids. The anions of these salts play a key role in directing the packing of 4-PAH(+) in the solid state. The anions CF(3)CO(2)(-), Cl(-), ClO(4)(-), and BF(4)(-) direct the parallel alignments of 4-PAH(+) in head-to-tail (HT) fashion and lead to the formation of HT-photodimer. On the other hand, bivalent anion SO(4)(2-) directs parallel alignment of 4-PAH(+) in head-to-head (HH) fashion and lead to the formation of HH-photodimer. The details of the anion-controlled stereoselective syntheses of these two cyclobutane derivatives are presented. Interestingly, both cyclobutane compounds undergo isomerization from rctt-form to rctc-form in solution catalyzed by acid.     

Anion selectivity in zwitterionic amide-functionalised metal salt extractants

Amide-functionalised salen ligands capable of extracting metal salts have been synthesised and characterised. Single-crystal X-ray structure determinations of complexes of NiSO4, [Ni(L)(SO4)], confirm that the ionophores are in a zwitterionic form with Ni(II) bound in the deprotonated salen moiety and the SO4(2-) ion associated with protonated pendant N'-amidopiperazine groups. Treatment of [Ni(L)(SO4)] with base removes the protons from the pendant amido-amine group resulting in loss of the SO4(2-) ion and formation of metal-only complexes of type [Ni(L-2H)], which have been characterized by single-crystal X-ray diffraction. Three of the ligands with solubilities suitable for solvent extraction studies show loading and stripping pH-profiles that are suitable for the recovery of CuSO4 or CuCl2 from industrial leach solutions. The copper-only complexes, [Cu(L-2H)], are selective for Cl- over SO4(2-) in both solvent extraction and bulk liquid membrane transport experiments and were found to bind Cl- in two steps via the formation of a 1:1:1 [Cu(L-H)Cl] assembly, followed by a 1:1:2 [Cu(L)Cl2] assembly as the pH of the aqueous phase is lowered. The anion transport selectivity was evaluated for a number of other mono-charged anions and interestingly the ligands were found to display a preference for the Br- ion. To probe the influence of the Hofmeister bias on the selectivity of anion complexation, single-phase potentiometric titration experiments were employed to investigate the binding of SO4(2-) and Cl- by one of the copper only complexes, [Cu(L-2H)] in 95 %/5 % MeOH/water. Under these conditions selectivity was reversed (SO4(2-)>Cl-) confirming that the Hofmeister bias, which reflects the relative hydration energies of the anions, dominates the selectivity of anion extraction from aqueous media into CHCl3.     

Communication: Vibrational spectroscopy of atmospherically relevant acid cluster anions: bisulfate versus nitrate core structures

Infrared multiple photon dissociation spectra for the smallest atmospherically relevant anions of sulfuric and nitric acid allow us to characterize structures and distinguish between clusters with a bisulfate or a nitrate core. We find that bisulfate is the main charge carrier for HSO(4)(-)·H(2)SO(4)·HNO(3) but not for NO(3)(-)·H(2)SO(4)·HNO(3). For the mixed dimer anion, we find evidence for the presence of two isomers: HSO(4)(-)·HNO(3) and NO(3)(-)·H(2)SO(4). Density functional calculations accompany the experimental results and provide support for these observations.     

Solid-state chelation of metal ions by ethylenediaminetetraacetate intercalated in a layered double hydroxide

The solid-state chelation of transition metal ions (Co(2+), Ni(2+), and Cu(2+)) from aqueous solutions into the lithium aluminum layered double hydroxide ([LiAl(2)(OH)(6)]Cl x 0.5H(2)O or LDH) which has been pre-intercalated with EDTA (ethylenediaminetetraacetate) ligand has been investigated. The intercalated metal cations form [M(edta)](2)(-) complexes between the LDH layers as indicated by elemental analysis, powder X-ray diffraction, and IR and UV-vis spectroscopies. If metal chloride or nitrate salts are used in the reaction with the LDH then co-intercalation of either the Cl(-) or NO(3)(-) anions is observed. In the case of metal acetate salts the cations intercalate without the accompanying anion. This can be explained by the different intercalation selectivity of the anions in relation to the LDH. In the latter case the introduction of the positive charge into LDH structure was compensated for by the release from the solid of the equivalent quantity of lithium and hydrogen cations. Time-resolved in-situ X-ray diffraction measurements have revealed that the chelation/intercalation reactions proceed very quickly. The rate of the reaction found for nickel acetate depends on concentration as approximately k[Ni(Ac)(2)](3).     

Matrix influences on the determination of common ions by using ion chromatography part 1--determination of inorganic anions

Ion chromatography is the most popular instrumental analytical method used for the determination of anions and cations in water and wastewater. Isocratic ion chromatography with suppressed conductivity detection is frequently used in laboratories carrying out routine analyses of inorganic anions. The paper presents the results of the research into the influence of selected inorganic anions dominant in environmental samples (Cl(-), NO(3)(-), SO(4)(2-)) on the possibility of simultaneous determination of F(-), Cl(-), NO(2)(-), NO(3)(-), PO(4)(3-) and SO(4)(2-) with the application of this most popular ion chromatography type in standard separation conditions. Four Dionex and four Metrohm anion-exchange columns were tested in standard separation conditions recommended by their manufacturers with both standard solutions and environmental samples with complex matrix.     

Triphenylene based copper ensemble for the detection of cyanide ions

The binding behavior of triphenylene based copper ensemble prepared in situ has been investigated toward various anions (F(-), Cl(-), Br(-), I(-), CH(3)COO(-), H(2)PO(4)(-), NO(3)(-), OH(-), ClO(4)(-), CN(-), CO(3)(-) and SO(4)(-)) by UV-vis and fluorescence spectroscopy. Among various anions tested, 1-Cu(2+) ensemble shows selective and sensitive response towards cyanide ions and responds to CN(-) ions even in the presence of bovine serum albumin and in blood serum milieu. Further, as practical application of compound 1, we utilized the TLC strips coated with THF solution of 1 for the solid state detection of copper and cyanide ions.     

Detection of binuclear copper-caffeine complexes under electrospray ionization condition

A number of copper salts, Cu(OOCCH(3))(2), Cu(ClO(4))(2), Cu(NO(3))(2), CuCl(2) and CuSO(4) have been tested for their ability to form binuclear copper-caffeine complexes. The electrospray ionization (ESI) mass spectra of methanol solution containing caffeine and CuCl(2) or CuSO(4) show signals of two copper atom containing ions, so the signals correspond to binuclear complexes: [2Caf + Cu(2)SO(4)](+), [2Caf + Cu(2)](+), [2Caf + Cu(2)Cl](+), [2Caf + Cu(2)Cl(2)](+) and [2Caf + Cu(2)Cl(3)](+). Sulfate and chloride anion are characterized by charge densities higher than those of the carboxylate, nitrate and perchlorate anion. Thus, due to the electrostatic forces, the binuclear complexes containing SO(4)(2-) or Cl(-) can survive the transfer from solution to the gas phase and then can successfully be observed on ESI mass spectra. The ion [2Caf + Cu(2)Cl(3)](+) is present in solution and could be detected when using methanol/chloroform as solvent. The ions [2Caf + Cu(2)](+), [2Caf + Cu(2)Cl](+) and [2Caf + Cu(2)Cl(2)](+) are formed from the [2Caf + Cu(2)Cl(3)](+) ion (by subsequent loss of Cl atoms) on transfer from the solution to the gas phase or in the gas phase. The ion [2Caf + Cu(2)](+) does not contain a bridging agent, thus it is reasonable to assume that it contains a Cu-Cu bond.     

Effect of different salts and detergents on luciferin-luciferase luminescence of the enchytraeid Fridericia heliota

The study addresses the effect produced by different inorganic salts and detergents (SDS, Triton X-100, the Tween series) on the ATP-dependent bioluminescent reaction catalyzed by the luciferase of the new earthworm species Fridericia heliota (Annelida: Clitellata: Oligochaeta: Enchytraeidae). It has been shown that the effect of divalent metal salts on luminescence is determined by the action of cations. Three of them - Mg(2+), Mn(2+) and Ca(2+) - can stimulate luciferase activity at concentrations varying within a wide range, and Mn(2+) can act as a 100%-effective substitute for Mg(2+) in F. heliota luminescence reaction in vitro. The inhibitory effect of monovalent metal salts on luminescence is largely determined by the action of the anion part of the molecule. The effectiveness of the inhibitory effect of anions increases in the following order: Cl(-)相似文献   

Halide and nitrite recognizing hexanuclear metallacycle copper(II) pyrazolates

Halide-centered hexanuclear, anionic copper(II) pyrazolate complexes [trans-Cu(6)((3,5-CF(3))(2)pz)(6)(OH)(6)X](-), X = Cl, Br, I are isolated in a good yield from the redox reaction of the trinuclear copper(I) pyrazolate complex [μ-Cu(3)((3,5-CF(3))(2)pz)(3)] with a halide source such as PPh(3)AuCl or [Bu(4)N]X, X = Cl, Br, or I, in air. X-ray structures of the anion-centered hexanuclear complexes show that the six copper atoms are bridged by bis(3,5-trifluoromethyl)pyrazolate and hydroxyl ligands above and below the six copper atom plane. The anions are located at the center of the cavity and weakly bound to the six copper atoms in a μ(6)-arrangement, Cu-X = ~3.1 ?. A nitrite-centered hexanuclear copper(II) pyrazolate complex [trans-Cu(6)((3,5-CF(3))(2)pz)(6)(OH)(6)(NO(2))](-) was obtained when a solution of [PPN]NO(2) in CH(3)CN was added dropwise to the trinuclear copper(I) pyrazolate complex [μ-Cu(3)((3,5-CF(3))(2)pz)(3)] dissolved in CH(3)CN, in air. Blue crystals are produced by slow evaporation of the acetonitrile solvent. The X-ray structure of [PPN][trans-Cu(6)((3,5-CF(3))(2)pz)(6)(OH)(6)(NO(2))] complex shows the nitrite anion sits in the hexanuclear cavity and is perpendicular to the copper plane with a O-N-O angle of 118.3(7)°. The (19)F and (1)H NMR of the pyrazolate ring atoms are sensitive to the anion present in the ring. Anion exchange of the NO(2)(-) by Cl(-) can be observed easily by (1)H NMR.     

Organobismuth compounds with the pincer ligand 2,6-(Me2NCH2)2C6H3: monoorganobismuth(III) carbonate, sulfate, nitrate, and a diorganobismuthenium(III) salt

The reaction of RBiCl(2) (1) [R = 2,6-(Me(2)NCH(2))(2)C(6)H(3)] with Na(2)CO(3) or Ag(2)SO(4) (1 : 1 molar ratio) gave RBiCO(3) (2) and RBiSO(4) (3), respectively. RBi(NO(3))(2) (4) was obtained from RBiCl(2) and AgNO(3) (1 : 2 molar ratio). The ionic complex [R(2)Bi][W(CO)(5)Cl] (6) was obtained from R(2)BiCl (5) and W(CO)(5)(THF), following an unusual chlorine transfer from bismuth to tungsten. Compounds 2-4 are partially soluble in water. The molecular structures of 2·0.5CH(2)Cl(2), 3, 4·H(2)O and 6 were established by single-crystal X-ray diffraction. The carbonate 2 and the sulfate 3 exhibit a polymeric structure based on bridging oxo anions, while for the compound 4 dimer associations are formed, with both bridging and terminal nitrate anions. Dimer associations, based on weak Cl···H interactions between the cation and the anion, were found in the crystal of 6.     

Studies on the effects of metal ions and counter anions on the aggregate behaviors of meso-tetrakis(p-sulfonatophenyl)porphyrin by absorption and fluorescence spectroscopy

The aggregation behaviors of meso-tetrakis(p-sulfonatophenyl)porphyrin (TPPS) in the function of metal ions and their counter anions (Cl(-), SO(4)(2-), and NO(3)(-)) were investigated by absorption, fluorescence spectroscopy and resonance scattering spectrum. It was shown that the TPPS J-aggregates could be effectively promoted by metal ions under lower ionic strength. Moreover, the prominent effects of counter ions (Cl(-), SO(4)(2-), and NO(3)(-)) on TPPS J- and/or H-aggregate formation at higher ionic strength were observed. These results suggested that the counter anions play a significant role in the formation of TPPS J- and/or H-aggregates and their conversion each other. Very interestingly, the absorption spectrum of metal ions investigated except for Co(2+) leaves a WINDOW from ca. 450 to 550nm centered at 490nm in which the absorption of Cu(2+) or Ni(2+) ions per se was very weak. The spectrum window might be really significant in avoiding possible spectrum interferences when porphyrins are chosen as spectrometric reagents for the determination of metal ions based on J-aggregation.     

Novel cation [N(SO2NMe3)2]+ and its synthesis and crystal structure. Dichloride of imido-bis(sulfuric) acid HN(SO2Cl)2. Part 1. Crystal structures of KN(SO2Cl)2.(1/2)CH3CN, KN(SO2Cl)2.(1/6)CH2Cl2, and [PCl4][N(SO2Cl)2

Several salts of bis(chlorosulfonyl)imide HN(SO2Cl)2 (1), namely, two solvates of its potassium salt, KN(SO2Cl)2.(1/2)CH3CN (1K1), KN(SO2Cl)2.(1/6)CH2Cl2 (1K2), and its tetrachlorophosphonium salt, [PCl4][N(SO2Cl)2] (2), were prepared and structurally characterized. The reaction of HN(SO2Cl)2 with Me3N gives the [N(SO2Cl)2]- salt of a novel cation, [N(SO2NMe3)2]+. This cation is analogous to the [HC(SO2NMe3)2]+ cation, but in contrast to the latter, it is fairly stable to hydrolysis. The salt [N(SO2NMe3)2]+[N(SO2Cl)2]- (3) can be converted into salts of other anions by being treated with diluted aqueous solutions of the respective acids, and thus NO3-, Cl-.H2O, SeO3(2-), CH3COO-, HSO4-, (COO)2(2-) salts were prepared. Treatment of 3 with concentrated HNO3 gave the [N(SO2NMe3)2]+ [O2NO-H-ONO2]- salt, and the addition of an HCl-acidified FeCl3 aqueous solution yielded the FeCl4- salt. Methanolysis resulted in the formation of MeOSO3- and [MeOSO2NSO2OMe]- salts. All salts have been characterized by chemical analysis, vibrational spectroscopy, and X-ray structure determinations.     

Reversible anion exchanges between the layered organic-inorganic hybridized architectures: syntheses and structures of manganese(II) and copper(II) complexes containing novel tripodal ligands

Six noninterpenetrating organic-inorganic hybridized coordination complexes, [Mn(3)(2)(H(2)O)(2)](ClO(4))(2).2 H(2)O (5), [Mn(3)(2)(H(2)O)(2)](NO(3))(2) (6), [Mn(3)(2)(N(3))(2)].2 H(2)O (7), [Cu(3)(2)(H(2)O)(2)](ClO(4))(2) (8), [Mn(4)(2)(H(2)O)(SO(4))].CH(3)OH.5 H(2)O (9) and [Mn(4)(2)](ClO(4))(2) (10) were obtained through self-assembly of novel tripodal ligands, 1,3,5-tris(1-imidazolyl)benzene (3) and 1,3-bis(1-imidazolyl)-5-(imidazol-1-ylmethyl)benzene (4) with the corresponding metal salts, respectively. Their structures were determined by X-ray crystallography. The results of structural analysis of complexes 5, 6, 7, and 8 with rigid ligand 3 indicate that their structures are mainly dependant on the nature of the organic ligand and geometric need of the metal ions, but not influenced greatly by the anions and metal ions. While in complexes 9 and 10, which contain the flexible ligand 4, the counteranion plays an important role in the formation of the frameworks. Entirely different structures of complexes 5 and 10 indicate that the organic ligands greatly affect the structures of assemblies. Furthermore, in complexes 5 and 6, the counteranions located between the cationic layers can be exchanged by other anions. Reversible anion exchanges between complexes 5 and 6 without destruction of the frameworks demonstrate that 5 and 6 can act as cationic layered materials for anion exchange, as determined by IR spectroscopy, elemental analyses, and X-ray powder diffraction.     

Functionalized polymeric stationary phases for ion chromatography

Synthesis and properties of the multilayered stationary phases, which contain quaternary amine functional groups for the analysis of anions by ion chromatography, are described. The bonded phases were characterized by elemental analysis, solid-state (13)C NMR spectroscopy and chromatographic methods. The surface of 1,4-di(2-hydroxy-3-methacryloyloxypropoxy)phenol (solid support) was coated with polymeric layers formed by condensation polymerization of primary amine with diepoxide. Each layer of the anion exchange stationary phase consists of copolymer of methylamine (MA) and 1,4-butanedioldiglycidyl ether (BDDE). A series of stationary phases with different numbers of polymerized layers were tested. The separation of an inorganic anions sample (F(-), Cl(-), NO(2)(-), Br(-), NO(3)(-), additionally HPO(4)(2-) and SO(4)(2-)) was performed. In the measurement, a hydroxide, carbonate, bicarbonate and their mixture were used as mobile phases.     

Binding of polyanions by biogenic amines. I. Formation and stability of protonated putrescine and cadaverine complexes with inorganic anions

The formation and stability of proton diamine-inorganic anion [Cl(-), SO(4)(2-), HPO(4)(2-), P(2)O(7)(4-) and Fe(CN)(6)(4-)] complexes was studied potentiometrically [(H(+))-glass electrode] at 25 degrees C. Several general formula ALH(r) complexes are formed in these various systems. The stability of complexes formed between H(2)A(2+) and different anions ranges from one to six (log formation constants). The formation constants are slightly dependent on the length of the alkylic chain whilst they strongly depend on the anion charge. A general relationship [logK=-0.85+1.81z-0.055n] was found for the reaction H(2)A(2+)+L(z-)=ALH(2)((2-z)) [L=inorganic anions, A=NH(2)-(CH(2))(n)-NH(2) diamines with n=2...8].     

Dual-stimuli responsive behaviors of diblock polyampholyte PDMAEMA-b-PAA in aqueous solution

The rheological behaviour of aqueous suspensions of boehmite (AlO(OH)) modified with different Ce-salts (Ce(NO(3))(3), CeCl(3), Ce(CH(3)COO)(3) and Ce(2)(SO(4))(3)) was investigated at a fixed Ce/Al molar ratio (0.05). Freshly prepared boehmite suspensions were near-Newtonian and time-independent. A shear-sensitive thixotropic network developed when Ce-salts with monovalent anions were introduced in the nanoparticle sols. The extent of particle aggregation dramatically increased with ageing for Ce(NO(3))(3) and CeCl(3) whereas an equilibrium value was reached with Ce(CH(3)COO)(3). The addition of Ce(2)(SO(4))(3) with divalent anions involved no thixotropy but rather a sudden phase separation. The combined data set of IRTF and DRIFT spectra indicated that free NO(3)(-) anions of peptized boehmite adsorb on the nanoparticle surface by H-bond. The introduction of Ce-salts in the boehmite sol led to the coordination between Ce(3+) ions and NO(3)(-) anions adsorbed on boehmite i.e. to [Ce(NO(3))(4)(H(2)O)(x)](-) complex. Such coordination led to a thixotropic behaviour which was lower with Ce(NO(3))(3) compared to CeCl(3) and Ce(CH(3)COO)(3). In contrast, Ce(2)(SO(4))(3) formed insoluble complexes with dissolved aluminium species. The formation of H-bonded surface nitrate complexes was found to play a decisive role on the particle-particle interactions and consequently on the rheological behaviour of the sols.     

Synthesis of Cu1.8S and CuS from copper-thiourea containing precursors; anionic (Cl(-), NO3(-), SO4(2-)) influence on the product stoichiometry

A novel and unique understanding pertaining to the synthesis of Cu(1.8)S and CuS in bulk was achieved from the analysis of the products of the Cu-Tu precursors, with Cl(-), NO(3)(-), and SO(4)(2-) as the counteranions, in ethylene glycol. [Cu(4)(tu)(9)](NO(3))(4)·4H(2)O always yielded CuS whether the dissociation was carried out in ethylene glycol in the presence of air or argon or under solvothermal conditions. Cu(1.8)S was the only product when [Cu(tu)(3)]Cl was dissociated in air as well as in flowing argon in ethylene glycol. A mixture of Cu(1.8)S and CuS was formed from the chloride ion containing precursor when dissociated solvothermally. [Cu(2)(tu)(6)]SO(4)·H(2)O yielded a mixture of CuS and Cu(1.8)S on dissociation in the presence of air and argon, as well as under solvothermal conditions. The oxidizing power of the anions Cl(-), SO(4)(2-), and NO(3)(-), present in the precursor, greatly determined the extent of formation of Cu(1.8)S and CuS. While Cu(1.8)S showed hexagonal plate like morphology, flower like morphology was observed for CuS in the SEM images. In the mixed phase, Cu(1.8)S + CuS, both these morphologies were present. Cu(1.8)S and CuS showed scattering resonances at 470 cm(-1) and 474 cm(-1), respectively, in the Raman spectrum. Magnetization measurements at room temperature revealed diamagnetic behavior for Cu(1.8)S indicating the presence of +1 oxidation state for copper. Weak paramagnetic behavior was observed for CuS with χ(M) value of 1.198 × 10(-3) emu/mol at 300 K. Both Cu(1.8)S and CuS showed similar emission behavior in the photoluminescence spectrum with band positions centered at around 387, 390, 401, 423, and 440 nm. The origin of photoluminescence in these two copper sulfides remains elusive.