Surface-enhanced Raman and fluorescence joint analysis of soil humic acids

Surface-enhanced Raman scattering (SERS) and surface-enhanced fluorescence (SEF) combined emissions were used in this work to the analysis of humic acids (HA). This study examined HA structure at different pH and HA concentrations and assessed the structural differences taking place in HA as a result of various amendment trials. Raman and fluorescence emissions behave in opposite ways due to the effect of the metal surface on the aromatic groups responsible for these emissions. The information afforded by these techniques can be successfully employed in the structural and dynamic analysis of these important macromolecules. The surface-enhanced emission (SEE) spectra, that is the sum of the Raman and the fluorescence emissions, were acquired by using both macro- and micro-experimental configurations in order to apply imaging and confocal Raman and fluorescence spectroscopy techniques on the analysis of HA.     

One-pot synthesis of silver colloid with body-heat for surface-enhanced Raman spectroscopy detections

In this study, a convenient method of preparing the substrate is proposed with one-pot synthesis of silver colloid under body heat, and the SERS detection uses the fresh substrate to avoid the drawback of substrates' short life of use. The synthesis of silver colloid is carried out in a 10 mL vial by using ascorbic acid as a reductant and trisodium citrate as a stabilizer. The vial is grasped with the palm of the experimenter for several minutes without shaking. The proposed method is simple, rapid, green energy and cost-effective. By adjusting the concentration of trisodium citrate, not only the particle size can be controlled from about 110 nm to 50 nm but also the homogeneity of nanoparticles can be improved. As a SERS substrate, the silver colloid has high batch reproducibility and showed good SERS activity. The relative standard deviation between different manufacturers is 5.51% when the substrate of silver colloid is used for the detection of rhodamine 6 G. Using the substrate, the lowest detection concentrations of rhodamine 6 G, crystal violet, enrofloxacin, melamine and leucomalachite green are 1.0×10~(-8), 6.1×10~(-8),1.4 × 10~(-6), 7.1 ×10~(-5) and 5.1 ×10~(-8) mol/L, respectively. Results demonstrate that the developed method has the advantage of convenience and high efficiency in the field preparation of reliable SERS substrate.     

Density functional theory study on surface-enhanced Raman scattering of 4,4′-azopyridine on silver

Surface-enhanced Raman scattering (SERS) of 4,4′-azopyridine (AZPY) on silver foil substrate was measured under 1064 nm excitation lines. Density-functional theory (DFT) methods were used to calculate the structure and vibrational spectra of models such as Ag–AZPY, Ag₄–AZPY and Ag₆–AZPY complexes with B3LYP/6-31++G(d,p)(C,H,N)/Lanl2dz(Ag) basis set. The Raman bands of AZPY were identified on the ground of analog computation of potential energy distribution. The calculated spectra of Ag₄–AZPY and Ag₆–AZPY models were much approximated to the experimental results than that of Ag–AZPY model. The DFT results showed that the angles between two pyridyl rings keep 0° from AZPY to Ag–AZPY, Ag₄–AZPY and Ag₆–AZPY model. The energy gaps between the HOMO and LUMO changed from 363 to 1140 nm for AZPY-Ag complexes according to the DFT results. An conclusion was conceived that chemical enhancement mechanism may play an important role in the SERS of AZPY on silver substrate.     

Improved surface-enhanced Raman scattering on optimum electrochemically roughened silver substrates

In this work, the effects of preparation conditions used in roughening silver substrates by electrochemical triangular-wave oxidation-reduction cycles (ORC) on surface-enhanced Raman scattering (SERS) were first investigated. The optimum roughening conditions for obtaining strongest SERS of Rhodamine 6G (R6G) are as follows. Ag electrodes were cycled in deoxygenated aqueous solutions containing 0.1 M NaCl from −0.3 to +0.2 V versus Ag/AgCl at 25 mV s⁻¹ for five scans. The SERS of R6G adsorbed on this optimum procedure-prepared roughened Ag substrate exhibits a higher intensity by one order of magnitude, as compared with that of R6G adsorbed on a normally roughened Ag substrate.     

Reaction pathway change on plasmonic Au nanoparticles studied by surface-enhanced Raman spectroscopy

Gold nanoparticles (Au NPs) are nanoscale sources of light and electrons, which are highly relevant for their extensive applications in the field of photocatalysis. Although a number of research works have been carried out on chemical reactions accelerated by the energetic hot electrons/holes, the possibility of reaction pathway change on the plasmonic Au surfaces has not been reported so far. In this proof-of-concept study, we find that Au NPs change the reaction pathway in photooxidation of alkyne under visible light irradiation. This reaction produces benzil (COCO) without the presence of Au NPs. In contrast, as indicated by surface-enhanced Raman spectroscopic (SERS) results, the CC triple bonds (CC) adsorbed on Au NPs are converted into carboxyl (COOH) and acyl chloride (COCl) groups. The plasmonic Au NPs not only provide energetic charge carriers but also activate the reactant molecules as conventional heterogeneous catalysts. This study discloses the second role of plasmonic NPs in photocatalysis and bridges the gap between plasmon-driven and conventional heterogeneous catalysis.     

Surface-enhanced Raman scattering for perchlorate detection using cystamine-modified gold nanoparticles

Perchlorate (ClO₄⁻) has recently emerged as a widespread environmental contaminant found in groundwater and surface water, and there is a great need for rapid detection and monitoring of this contaminant. This study presents a new technique using cystamine-modified gold nanoparticles as a substrate for surface-enhanced Raman scattering (SERS) detection of perchlorate at low concentrations. A detection limit of 5 × 10⁻⁶ M (0.5 mg/L) has been achieved using this method without sample preconcentration. This result was attributed to a strong plasmon enhancement by gold metal surfaces and the electrostatic attraction of ClO₄⁻ onto positively charged, cystamine-modified gold nanoparticles at a low pH. The methodology also was found to be reproducible, quantitative, and not susceptible to significant interference from the presence of anions such as sulfate, phosphate, nitrate and chloride at concentrations <1 mM, making it potentially suitable for rapid screening and routine analysis of perchlorate in environmental samples.     

Silver–platinum core–shell nanoparticles for surface-enhanced Raman spectroscopy

Core–shell Ag@Pt nanoparticles have been synthesised by the means of seed-growth reaction including reduction of PtCl₄²⁻ with silver and replacing Ag atoms with Pt. Surface-enhanced Raman scattering (SERS) spectra of pyridine (which gives slightly different spectra when interacting with various metals) adsorbed on synthesised Ag@Pt clusters were measured. SERS measurements have revealed that deposition of the platinum layer causes near elimination of the spectral interferences from pyridine directly interacting with the silver core. The average SERS enhancement factor for pyridine adsorbed on the Ag@Pt clusters was estimated as equal to about 10³–10⁴, significantly higher than the SERS enhancement factor achievable on the pure platinum nanostructures. Using the silver core (instead of the previously used gold cores) allows for measurement of strong SERS spectra on the Pt covered nanostructures for the wider range of the excitation radiation. This procedure of platinum deposition was tested with various silver nanoparticles – produced with borohydride, citrate and citrate/borohydride methods – which substantially differ in size distribution. The application of formed Ag@Pt structures for obtaining intense Raman spectra for molecules adsorbed on only slightly modified platinum surfaces is discussed.     

In-situ surface-enhanced Raman scattering and FT-Raman spectroscopy of black prints

The black inkjet and laser prints were analysed with regard to application in forensic analysis of questioned documents. The purpose of this work was to study spectral properties and compare the suitability of surface-enhanced Raman scattering (SERS) with Fourier transform Raman spectra of prints. This work aimed to find optimal surface-enhanced Raman spectroscopic approach for the future analysis of documents using statistical methods. In this work, we analysed eight prints of four laser and four inkjet devices. The samples were measured using two dispersive Raman devices; (DXR Raman microscope with excitation line 532 nm, Foram 685-2 spectrometer − 685 nm) and FT-Raman device (Bruker Spectrometer MultiRAM with excitation line 1064 nm). The silver nanoparticles (AgNPs) colloid for SERS experiment were synthesised and checked by UV–vis spectroscopy and scanning electron microscopy (SEM). The remarkable differences caused by centrifugation of silver colloid were observed just in the SEM images. The main contribution of this paper is to propose the novel approach achieving sufficient SERS signal intensity of black prints using the both, laser and inkjet printers. Moreover, this method is based on just a single metal colloid, and the analysis can be performed in-situ, i.e. directly on the printed sample surface. We consider the SERS could by highly promising and universal for applications in the forensic analysis of printed documents with the combination of statistical method when conventional methods are not effective.     

The auxiliary determination of the binding site of berberine binding to human serum albumin by surface-enhanced Raman scattering

We report on the joint application of fluorescence, ultraviolet-visible (UV-Vis) and Raman spectroscopy to the study of berberine with human serum albumin (HSA). We propose the surface-enhanced Raman scattering (SERS) technique to improve the understanding of the quenching interaction caused by berberine which could be applied in recognition process of fluorescent drugs with large biomolecules. The fluorescence and UV-Vis spectroscopic results show that the fluorescence intensity of HSA is significantly decreased in the presence of berberine, and the quenching mechanism is static. The SERS technique demonstrates clear advantages over direct measurements in physiological conditions. By means of this method, we are able to deduce important information concerning the binding property of berberine when interacting with HSA. We show the nitrogen atom is free but the dioxolane is involved in the spontaneously electrostatic inducement and subsequently hydrophobic binding.     

Improved surface-enhanced Raman scattering on electrochemically roughened silver substrates prepared in bielectrolyte solutions

In this work, the effect of supplemental LiClO₄ electrolytes in KCl solutions used in roughening silver substrates by electrochemical triangular-wave oxidation-reduction cycles (ORC) on surface-enhanced Raman scattering (SERS) was first investigated. To prepare SERS-active substrates by ORC procedures, electrolytes of KCl were generally employed. In contrast, LiClO₄ ones were unsuitable for producing SERS-active substrates. Encouragingly, SERS of Rhodamine 6G (R6G) adsorbed on the roughened Ag substrate prepared in an aqueous solution containing KCl and LiClO₄ electrolytes exhibits a higher intensity by one order of magnitude, as compared with that of R6G adsorbed on a roughened Ag substrate prepared in a solution only containing KCl. Further investigations indicate that the oxidation state of Cl on the roughened Ag substrate demonstrates decided effects on this improved SERS.     

A simple approach for ultrasensitive detection of bisphenols by multiplexed surface-enhanced Raman scattering

Bisphenol A (BPA) is well known for its use in plastic manufacture and thermal paper production despite its risk of health toxicity as an endocrine disruptor in humans. Since the publication of new legislation regarding the use of BPA, manufacturers have begun to replace BPA with other phenolic molecules such as bisphenol F (BPF) and bisphenol B (BPB), but there are no guarantees regarding the health safety of these compounds at this time. In this context, a very simple, cheap and fast surface-enhanced Raman scattering (SERS) method was developed for the sensitive detection of these molecules in spiked tap water solutions. Silver nanoparticles were used as SERS substrates. An original strategy was employed to circumvent the issue of the affinity of bisphenols for metallic surfaces and the silver nanoparticles surface was functionalized using pyridine in order to improve again the sensitivity of the detection. Semi-quantitative detections were performed in tap water solutions at a concentrations range from 0.25 to 20 μg L⁻¹ for BPA and BPB and from 5 to 100 μg L⁻¹ for BPF. Moreover, a feasibility study for performing a multiplex-SERS detection of these molecules was also performed before successfully implementing the developed SERS method on real samples.     

Determination of primary aromatic amines using immobilized nanoparticles based surface-enhanced Raman spectroscopy

Primary aromatic amines(PAAs) are substances with toxicity and suspected human carcinogenicity. A facile method for highly sensitive detection of PAAs using surface-enhanced Raman spectroscopy(SERS)is reported. The immobilization of Au nanoparticles(AuNPs) on the glycidyl methacrylate–ethylene dimethacrylate(GMA-EDMA) materials makes the substrate a closely packed but not aggregated AuNP arrays which provides a prominent SERS enhancement. Four PAAs with different substituent groups,namely, p-toluidine, p-nitroaniline, benzidine and 4,4-methylene-bis-(2-chloroaniline) have been successfully identified and quantified. High sensitivity and good linear relationship between SERS signals and concentrations of PAAs are obtained for all four PAAs.     

Surface-enhanced Raman scattering (SERS) for probing internal cellular structure and dynamics

Surface-enhanced Raman scattering (SERS) provides vibrational information about molecules that are located within several nanometers of the surface of a metallic nanoparticle. This review describes the various challenges and successes of applying SERS inside living cells in order to gain information about the internal structure and dynamic processes occurring in the intracellular matrix. In particular, the challenges associated with the introduction of metal nanoparticles into cells are described, as well as the complexity of interpreting SERS spectra from within complex biological environments. Strategies for understanding and improving the specificity of SERS in vivo are also presented.

Chemical analysis of polycyclic aromatic hydrocarbons by surface-enhanced Raman spectroscopy

The use of surface-enhanced Raman spectroscopy (SERS) for trace determination of polycyclic aromatic hydrocarbons (PAHs) is described. This paper focuses on the development of SERS-active substrates that are specific for the characterization and spectroscopic study of PAHs. The SERS-active substrates are based on thin gold films evaporated on a glass surface previously treated with a mercaptoalkylsilane. SERS of PAHs was investigated over uncoated gold island films and over such films coated with a self-assembled monolayer (SAM) of 1-propanethiol. Adsorption of PAHs on a plain SERS-active Au-film led to a surface-induced decomposition of PAHs, due to catalytic properties of nanostructured gold. Thus, the functionalization of the SERS-active substrates by means of SAM was done aiming at a specific chemical interaction toward PAHs. Thus, in addition to preventing decomposition of the PAHs, the coating also concentrates the hydrophobic PAHs close enough to the SERS-active interface. Results show that high sensitivity, SERS-active nanostructured gold substrates that show selectivity towards PAHs were obtained, with the following properties: strong intensification of the Raman signal, reproducibility, and stability over time. The employed methodology enables the observation of excellent Raman spectra of PAHs in aqueous environment at ppm levels.     

Photochemical decoration of silver nanoparticles on magnetic microspheres as substrates for the detection of adenine by surface-enhanced Raman scattering

In this work, silver nanoparticles (AgNPs) decorated magnetic microspheres (MMs) are prepared as surface-enhanced Raman scattering (SERS) substrate for the analysis of adenine in aqueous solutions. To prepare these substrates, magnetic particles were first synthesized by coprecipitation of Fe(II) and Fe(III) with ammonium hydroxide. A thin layer of cross-linked polymer was formed on these magnetic particles by polymerization through suspension of magnetic particles into a solution of divinyl benzene/methyl methacrylate. The resulted polymer protected magnetic particles are round in shape with a size of 80 μm in diameter. To form AgNPs on these MMs, photochemical reduction method was employed and the factors in photochemical reduction method were studied and optimized for the preparation of highly sensitive and stable AgNPs on MMs substrates (abbreviated as AgMMs substrates). By dispersing the AgMMs in aqueous samples, cylindrical magnet was used to attract the AgMMs for SERS detections. The observed enhancement factor of AgMMs reached 7 orders in magnitude for detection of adenine with a detection limit approaching to few hundreds of nanomolar.     

Silver-particle-based surface-enhanced resonance Raman scattering spectroscopy for biomolecular sensing and recognition

We demonstrate in this work that 2-μm-sized Ag (μAg) powders can be used as a core material for constructing biomolecular sensing/recognition units operating via surface-enhanced resonance Raman scattering (SERRS). This is possible because μAg powders are very efficient substrates for both the diffuse reflectance IR and the surface-enhanced Raman scattering–SERRS spectroscopic characterization of molecular adsorbates prepared in a similar manner on silver surfaces. Besides, the agglomeration of μAg particles in a buffer solution can be prevented by the layer-by-layer deposition of cationic and anionic polyelectrolytes such as poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA). In this particular study, we used rhodamine B isothiocyanate (RhBITC) as a SERRS marker molecule, and μAg powders adsorbed consecutively with RhBITC and PAH–PAA bilayers were finally derivatized with biotinylated poly(l-lysine). On the basis of the nature of the SERRS peaks of RhBITC, those μAg powders were confirmed to selectively recognize streptavidin molecules down to concentrations of 10⁻¹⁰ g mL⁻¹. Since a number of different molecules can be used as SERS–SERRS marker molecules, the present method proves to be an invaluable tool for multiplex biomolecular sensing/recognition via SERS and SERRS.     

Analysis of plant genomic DNAs and the genetic relationship among plants by using surface-enhanced Raman spectroscopy

The study aimed to distinguish genomic DNAs from nine species of plants belonging to six families and analyze their genetic relationship by using surface-enhanced Raman scattering (SERS). The silver nano-colloid and excitation wavelength of 785 nm used in this study yielded excellent quality of the SERS spectra. Raman signals were remarkably enhanced. Although the spectra for the nine species of plants appeared very similar, there were significant differences according to the analysis of variance analysis. There were three strong characteristic peaks. The peak at 625 cm⁻¹ was due to the vibration overlap of C3′-endo/anti deoxyribose, cytosine, and guanine; the one at 715 cm⁻¹ was due to the scissoring vibrations of C2N1C6 of adenine; and that at 1011 cm⁻¹ was due to the stretching vibration of the CO bond of deoxyribose and vibrations of cytosine. The SERS data were smoothed and standardized and evaluated using second derivative analysis, principal component analysis, and hierarchical cluster analysis. A model was established using the data from hierarchical cluster analysis and principal components of the second derivative. The clustering result of this model was highly consistent with the traditional classification of plants; all plant species investigated were correctly clustered into classes according to the cluster distance coefficient among them; the accuracy of clustering was 100%. Chinese cabbage (Brassica pekinensis Rupr.) and green cabbage (Brassica chinensis L.) belonging to Cruciferae, maize (Zea mays L.) and bamboo (Sinocalamus affinis McClure) belonging to Gramineae, and magnolia (Magnolia delavayi Franch.) and champaca (Michelia alba DC.) belonging to Magnoliaceae were clustered into three separate classes, and fern (Nephrolepis auriculata L., Nephrolepidaceae), garlic (Allium sativum L., Amaryllidaceae), and ginkgo (Ginkgo biloba L., Ginkgoaceae) were each clustered into separate classes. These findings suggest that the SERS spectra of plant genomic DNAs can be used to classify species and analyze their genetic relationship. It is an effective and perfect supplement to traditional classification and can form the basis for genetic analysis.     

等离激元激励表面增强拉曼光谱检测技术与仪器

本文总结了近年来基于传播型表面等离激元（Propagafingsurfaceplasmons,PSPs）参与的表面增强拉曼（Surface—enhancedRamanscattering,SERS）技术和仪器方面的研究进展．内容主要包括3部分：（1）基于PSPs激励拉曼散射的装置和技术,包括在消逝场下激发PSPs共振增强拉曼的原理与装置、与表面等离子体共振（Surfaceplasmonresonance,SPR）传感技术的联用及新型结构的长程等离激元激励拉曼技术的研究进展;（2）通过引入局域型表面等离激元（Localizedsurfaceplasmons,LSPs）进一步增强SERS,进而实现PSPs-LSPs共同增强拉曼的超灵敏检测技术,包括在消逝场激发的PSPs基础上,增加纳米粒子实现的PSPs与LSPs共同增强拉曼的原理、装置,以及用该方法进行生物体系的免疫识别检测,此外,还在微纳周期结构上实现了PSPs与LSPs共同激励拉曼;（3）基于PSPs耦合的定向SERS技术,包括在消逝场结构和周期结构上实现SERS定向耦合发射以达到高激发和高收集效率的新技术．     

Surface enhanced Raman spectroscopy signals of mixed pesticides and their identification

A rapid and sensitive method to identify and analyze mixed pesticides of tricyclazole,paraquat and flusilazole by surface-enhanced Raman scattering has been reported.Aqueous samples can be detected by SERS in low concentrations of 0.01 mg/L, 0.1 mg/L and 2.85 mg/L for individual tricyclazole,paraquat and flusilazole respectively.When mixing the three pesticides in the low concentrations,their characteristic peaks can still be identified from the SERS spectrum of the mixture.