Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

Measurement of the reactive and available solid-supported carboxylic,N-hydroxysuccinylated carboxylic,and aldehydo groups

We describe new colorimetric methods for the determination of the reactive and available solid-supported carboxylic,N-hydroxysuc cinylated carboxylic, and aldehydo groups under conditions usually applied for the coupling of biomolecules. The methods involve the reaction of the solid-supported functional groups with tyramine or cysteine, and the subsequent titration of the ligand coupled onto the solid supports using the commercially available bicinchoninic acid/copper protein assay reagent (BCA). The titration is based on the ability of these ligands to reduce Cu²⁺ to Cu⁺, which forms a chelate complex with bicinchoninic acid absorbing at 562 nm. The quantita tion is finally carried out through standard curves obtained using tyramine or cysteine solutions of known concentrations. The values obtained by the assays developed for several solid supports carrying carboxylic, NHS-ester, and aldehydo groups were well correlated with those obtained by other literature methods or provided by the manu facturers. All of the proposed methods are simple, more sensitive than other relevant literature methods, and require only commericially available reagents.     

Liposome-based immunostrip for the rapid detection of Salmonella

Salmonellae are ubiquitous human pathogens, which pose a danger to the elderly and children. Due to the increased number of outbreaks of human illness associated with the consumption of contaminated products in the USA and many other countries, there is an urgent need to develop rapid assays to detect common food-borne pathogens. This study demonstrates the feasibility of using a detectable label comprising methyl blue (MB), a visible dye, entrapped inside liposomes. Immunoliposomes tagged with anti-Salmonella common structural antigens (CSA) antibody encapsulating MB dye were prepared and used as the signal amplifier for the development of a field-portable colorimetric immunoassay to detect Salmonellae. Tapping mode atomic force microscopy (TMAFM), a scanning probe technique, was utilized to demonstrate the presence of anti-Salmonella antibody at the thus-prepared liposome. A plastic-backed nitrocellulose strip with two immobilized zones formed the basis of a sandwich assay. The first zone was the antigen capture zone (AC zone), used in a sandwich (noncompetitive) assay format; the other was the biotin capture zone (BC zone), used as a quality control index for the strip assay. During the capillary migration of the wicking reagent containing 80 μL of immunoliposomes and 40 μL of the test sample (heat-killed S. typhimurium), sample pathogens with surface-bound immunoliposomes were captured at the AC zone, while the unbound immunoliposomes continued to migrate and bind to the anti-biotin antibodies coated on the BC zone. The color density of the AC zone was directly proportional to the number of Salmonella typhimurium in the test sample. The detection limit of the current assay with heat-killed Salmonella typhimurium was 1,680 cells. The cross-reactivity of the proposed immunoassay was also investigated, and pathogens including E. coli O157:H7 and Listeria genus specific caused no interference with the detection of Salmonella typhimurium. Shi-Chin Zeng and Wei-Hsiang Tseng contributed equally to this publication.     

Quantitation ofAcidothermus cellulolyticus E1 endoglucanase andThermomonospora fusca E3 exoglucanase using enzyme-linked immunosorbent assay (ELISA)

Two distinct quantitative indirect ELISAs were developed to determine the concentration of recombinant cellulase enzymes in culture filtrates. A monoclonal antibody (E1P7) was used as the primary antibody in developing an ELISA specific forAcidothermus cellulolyticus E1 endoglucanase. Likewise, a polyclonal rabbit serum (Ab684) was used to develop an ELISA specific forThermomonospora fusca E₃ exoglucanase. Dose-response curves indicated a dynamic range for both assays between 0.01 and 0.08 μg/mL (1–8 ng/assay) when purified enzymes were used as standards. These assays have been used to estimate concentrations of secreted recombinant E1 and/or E₃ in culture supernatants ofStreptomyces lividans strain TK24 in which the corresponding genes have been cloned and expressed.     

Highly Dispersed X/SiO(2) and C/X/SiO(2) (X=Alumina, Titania, Alumina/Titania) in the Gas and Liquid Media

Fumed oxides, such as silica, alumina, titania, and mixed X/silicas (X=Al₂O₃ (AS), TiO₂ (TS), CVD-TiO₂, Al₂O₃/TiO₂ (AST)), pristine or covered by carbon deposits formed due to pyrolysis of cyclohexene, were studied using nitrogen adsorption–desorption, photon correlation spectroscopy particle sizing, and electrophoresis. A significant influence of the nature of surface-active sites and structural features of oxides (individual silica, mixed fumed, or prepared using chemical vapor deposition (CVD)) on the pyrolysis of cyclohexene is observed with respect to the pore size distributions due to differences between primary particles in aggregates and on their outer surfaces in the filling of channels by pyrocarbon, resulting also in a decrease in fractal dimension. Structural characteristics and dependences of the particle size distribution and electrokinetic potential of X/SiO₂ and C/X/SiO₂ on the pH of aqueous suspensions suggest that the carbon deposit covers mainly acidic sites at the X/SiO₂ interfaces and X phase patches possessing catalytic activity in pyrolysis, as the negative charge of particles is reduced by pyrocarbon grafting.     

The Heavy-Atom Effect on the Photophysics of Aromatic Hydrocarbons in the Presence of Solid Clays

The exchange of the original cation present on a Laponite clay (usually Na⁺) for heavy atoms such as Rb⁺, Cs⁺, and Tl⁺ significantly alters the emission characteristics of some aromatic hydrocarbons (p-terphenyl, naphthalene, pyrene, and biphenyl). The increase of the atomic mass of the cation induces a decrease of the fluorescence emission simultaneous with an increase of the emission in the region of lower energies of the spectra, ascribed to the phosphorescence of those hydrocarbons. Time-resolved experiments for the pyrene–clay system showed a decrease of singlet lifetimes for the heavier atoms. Hydrocarbon aggregates were also detected from both the emission spectra and the time-resolved studies. The “excimer-like” emission showed longer lifetimes (10–25 ns) than the monomolecular hydrocarbons (1–3 ns), as already found for other similar systems. The amount of aggregates increased for the heavier cations due to the smaller surface available on the clay particles. Experiments increasing the amount of Tl⁺ in samples containing a constant concentration of naphthalene allowed evaluation of the distance between the heavy atoms and the probe on the clay surface. The Perrin model treatment was used and resulted in approximately R₀=9.2 Å.     

Modification of poly(styrene-co-divinylbenzene) membrane by grafting of salicylic acid via a ketone bridge

Chelating solid phase extraction is a method particularly adapted to the recovery of metallic ions in polluted waters. The principle consists in the partitioning of the analyte between the solution and a solid sorbent grafted by a ligand. Aromatic organic crosslinked copolymers, which are commercially available, permit to consider numerous ways of linking the ligand to the sorbent. In this way, the grafting of salicylic acid (SA) via a ketone bridge on Amberlite^® XAD-4 resin has been previously achieved with success. Then the same grafting on Empore^™ SDB-XC membrane was also considered. The yield obtained is 33%. The determination of complexing capacities highlights the fact that about 20% of the grafted complexing sites could efficiently retain metallic ions. For the first time, a ligand has been covalently linked to Empore^™ SDB-XC membrane.     

Immunoaffinity chromatographic isolation of prostate-specific antigen from seminal plasma for capillary electrophoresis analysis of its isoforms

Prostate-specific antigen (PSA) concentration in serum has been the biomarker employed for prostate cancer diagnosis in the last two decades. However, new more specific biomarkers allowing a better differentiation of cancer from non-malignant prostate diseases are necessary. Glycosylation of PSA gives rise to different forms of the protein which can be separated into several isoforms by analytical techniques, such as CE. Because PSA glycosylation is influenced by pathological conditions, the CE pattern of PSA isoforms could be different in prostate cancer than in non-malignant prostate diseases. To study this CE pattern of PSA, prior purification of the protein from the biological fluid is mandatory. In this study an immunoaffinity chromatography method which allows PSA purification without altering the CE pattern is developed. An in-house prepared column produced with commercial anti-PSA antibodies is employed. The use of 1 M propionic acid as elution agent provides higher than 40% recovery of high purity PSA. CE analysis of PSA immunopurified from seminal plasma of a healthy individual shows the same 8 peaks as the commercially available PSA standard. Sample preparation only requires dilution with phosphate buffered saline prior to immunoaffinity purification. High repeatability for the sample preparation step was achieved (RSD% for percentage of corrected peak area in the range 0.6–5.3 for CE analysis of three independently purified seminal plasma aliquots compared to range 0.8–4.9 for a given aliquot analyzed three times by CE). IAC of five microliters seminal plasma provided enough PSA to achieve signal/noise ratio larger than 5 for the smallest CE isoforms.     

Thermocapillary Alignment of Gas Bubbles Induced by Convective Transport

The effect of a weak convective heat transfer on the thermocapillary interaction of two bubbles with an arbitrary orientation relative to an externally imposed temperature gradient is examined. Asymptotic analysis of the case of large separation distances, Z, suggests that the corrections to the bubbles' velocities are of (Pe/Z²), rather than (Pe²) previously found for an isolated bubble. Equal-sized bubbles are known to move with the same velocities, as if they were isolated, when heat conduction is the only transport mechanism. However, the convective transport results in a relative motion of the bubbles. The tendency of equal bubbles to line up in a plane perpendicular to the applied thermal gradient is shown analytically in the weakly nonlinear limit of small Pe numbers, and an interesting interaction behavior in the case of unequal bubbles is discussed.     

Adsorption of Amphiphilic Dimers at Surfaces

Adsorption of amphiphilic dimers is analyzed in the framework of density functional Ono–Kondo theory. There are three configurations for dimers absorbed at a surface: one parallel to the surface and two perpendicular to the surface (AB and BA, with A or B touching the surface, respectively). Densities of molecules in each configuration are calculated from density functional theory and compared to Monte Carlo simulation data. There is good agreement between theory and simulations. It is shown that the parallel configuration is preferred over the perpendicular configuration, except when there are very strong asymmetries in intermolecular forces. In most cases, the parallel configuration is even preferred over the combination of the two perpendicular configurations.     

Partially disposable biosensors for the quick assessment of damage in foodstuff after thermal treatment

A novel approach towards a quick, easy and reliable solution to the quite complex problems connected with the Amadori's compounds and furosine formation in several foodstuff is here proposed and based on enzymatic reactions, either as far as L-lysine release after partial hydrolysis from proteic material of the food matrix (bioavailable L-lysine), or as far as the determination of total and free L-lysine is concerned.The contribution proposes the use of specific L-lysine sensitive bioelectrodes for the evaluation of the possible heat damage through the rapid measure of L-lysine consumption. The L-lysine biosensor has been realized by immobilizing the enzyme L-lysine-α-oxidase (LOx) on an amperometric H₂O₂ sensitive electrode.The bioelectrode-enzymatic reaction arrangement allows to perform determinations of L-lysine and bioavailable L-lysine in foodstuff from different sources and after different thermal treatments in a very rapid inexpensive and reliable way in the range 1.0–33 ppm, with a limit of detection LOD = 0.5 ppm, so that a considerable number of samples can be easily monitored quickly and with very low costs.     

Poly(N-vinyl-2-pyrrolidone) and 1-Octyl-2-pyrrolidinone Modified Ionic Microemulsions

The influence of the nonionic polymer poly(N-vinyl-2-pyrrolidone) (PVP) in comparison to the surfactant 1-octyl-2-pyrrolidinone (OP) on the phase behavior of the system SDS/pentanol/xylene/water was studied. In both modified systems a strong increase in the water solubilization capacity was found, accompanied by a change in the spontaneous curvature toward zero. In the polymer-modified system an isotropic phase channel is formed with increasing polymer content that connects the L1 and the L2 phase. The lamellar liquid crystalline phase is destabilized in both cases. In the L1 phase the adsorption of PVP at the surface of the microemulsion droplets and the formation of a cluster-like structure is proven by several methods like ¹³C NMR T₁ relaxation time measurments, zeta potential measurements, and rheology. In the L2 phase a modification of the interface of the inverse droplets is detected by a shift in the percolation boundary (conductivity) and ¹³C NMR T₁ relaxation measurements. The formation of a cluster-like structure can be assumed on the basis of our rheological measurements.     

The electrochemical polymerization of <Emphasis Type="Italic">o</Emphasis>-phenylenediamine on <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine functionalized glassy carbon electrode and its application

The polymerization of o-phenylenediamine (OPD) on l-tyrosine (Tyr) functionalized glassy carbon electrode (GCE) and its electro-catalytic oxidation towards ascorbic acid (AA) had been studied in this report. l-Tyrosine was first covalently grafted on GCE surface via electrochemical oxidation, which was followed by the electrochemical polymerization of OPD on the l-tyrosine functionalized GCE. Then, the poly(o-phenylenediamine)/l-tyrosine composite film modified GCE (POPD-Tyr/GCE) was obtained. X-ray photo-electron spectroscopy (XPS), field emission scanning electron microscope (SEM), and electrochemical techniques have been used to characterize the grafting of l-tyrosine and the polymerization and morphology of OPD film on GCE surface. Due to the doping of the carboxylic functionalities in l-tyrosine molecules, the POPD film showed good redox activity in neutral medium, and thus, the POPD-Tyr/GCE exhibited excellent electrocatalytic response to AA in 0.1 mol l⁻¹ phosphate buffer solution (PBS, pH 6.8). The anode peak potential of AA shifted from 0.58 V at GCE to 0.35 V at POPD-Tyr/GCE with a greatly enhanced current response. A linear calibration graph was obtained over the AA concentration range of 2.5 × 10⁻⁴–1.5 × 10^–3 mol l⁻¹ with a correlation coefficient of 0.9998. The detection limit (3δ) for AA was 9.2 × 10⁻⁵ mol l⁻¹. The modified electrode showed good stability and reproducibility and had been used for the determination of AA content in vitamin C tablet with satisfactory results.     

Silylating Agents Grafted onto Silica Derived from Leached Chrysotile

Silica from leached chrysotile fibers (SILO) was silanized with trialkoxyaminosilanes to yield inorganic–organic hybrids designated SILx (x=1–3). The greatest amounts of the immobilized agents were quantified as 2.14, 1.90, and 2.18 mmol g⁻¹ on SIL1, SIL2, and SIL3 for –(CH₂)₃NH₂,–(CH₂)₃NH(CH₂)₂NH₂, and –(CH₂)₃NH(CH₂)₂NH(CH₂)₂NH₂ groups attached to the inorganic support. The infrared spectra for all modified silicas showed the absence of the Si–OH deformation mode, originally found at 950 cm⁻¹, and the appearance of asymmetric and symmetric C–H stretching bands at 2950 and 2840 cm⁻¹. Other important bands associated with the organic moieties were assigned to ν_as(NH) at 3478 and ν_sym(NH) at 3418 cm⁻¹. The NMR spectrum of the solid precursor material suggested two different kinds of silicon atoms: silanol and siloxane groups, between −90 and 110 ppm; however, additional species of silicon that contain the organic moieties bonded to silicon at −58 and −66 ppm appeared after chemical modification. These modified silicas showed a high adsorption capacity for cobalt and copper cations in aqueous solution, in contrast to the original SILO matrix, confirming the unequivocal anchoring of silylating agents on the silica surface.     

Preparation and Antibacterial Function of Quaternary Ammonium Salts Grafted Cellulose Fiber Initiated by Fe2 +-H2O2 Redox

The surface contact disinfecting technique is a newly developed method for water sterilization. In this paper, the grafted quaternary ammonium salts (QAS) antibacterial fibers were prepared and designed to apply for the surface contact disinfecting process in water treatment. The antibacterial fibers were directly prepared by grafting methacryloxylethyl benzyl dimethyl ammonium chloride (DMAE-BC) onto cellulose fiber using thiocarbonate-H₂O₂ redox system. All kinds of factors in the grafting reactions, such as reaction time, reaction temperature, monomer concentration, initiator concentration, which influence the percentage of grafting, were studied and optimized. The modified cellulose fibers were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope(SEM). The effects of the percentage of grafting of the grafted cellulose fibers on bactericidal activity were also studied. The spread plate method was used to characterize the bactericidal activity. The disinfection process was further investigated by directly observing the morphology of the bacterial cells adsorbed on the antibacterial fibers with SEM and measuring extracelluar total protein concentration in suspension. The poly(DMAE-BC)-grafted cellulose ?ber was found to exhibit particularly high activity against E.coli.     

Ultra-sensitive DNA assay based on single-molecule detection coupled with fluorescent quantum dot-labeling and its application to determination of messenger RNA

Rapid, inexpensive, and convenient methods for quantifying elemental sulfur (S⁰) with low or sub-μg g⁻¹ limits of detection would be useful for a range of applications where S⁰ can act as a precursor for noxious off-aromas, e.g., S⁰ in pesticide residues on winegrapes or as a contaminant in drywall. However, existing quantification methods rely on toxic reagents, expensive and cumbersome equipment, or demonstrate poor selectivity. We have developed and optimized an inexpensive, rapid method (∼15 min per sample) for quantifying S⁰ in complex matrices. Following dispersion of the sample in PEG-400 and buffering, S⁰ is quantitatively reduced to H₂S in situ by dithiothreitol and simultaneously quantified by commercially available colorimetric H₂S detection tubes. By employing multiple tubes, the method demonstrated linearity from 0.03 to 100 μg S⁰ g⁻¹ for a 5 g sample (R² = 0.994, mean CV = 6.4%), and the methodological detection limit was 0.01 μg S⁰ g⁻¹. Interferences from sulfite or sulfate were not observed. Mean recovery of an S⁰ containing sulfur fungicide in grape macerate was 84.7% with a mean CV of 10.4%. Mean recovery of S⁰ in a colloidal sulfur preparation from a drywall matrix was 106.6% with a mean CV of 6.9%. Comparable methodological detection limits, sensitivity, and recoveries were achieved in grape juice, grape macerate and with 1 g drywall samples, indicating that the methodology should be robust across a range of complex matrices.     

Electroosmotic Flow of a General Electrolyte Solution through a Fibrous Medium

Although hydrotropy is extensively used in industry, the molecular mechanism of hydrotropic solubilization has not been completely elucidated yet. In this paper the interaction between a nonionic surfactant (ethoxylated fatty alcohol containing between five and six oxyethylenic units) and sodium p-toluene sulfonate is examined. Surface tension measurements confirm that the hydrotropic effect occurs at a concentration in which the hydrotropes self-associate. Photon correlation spectroscopy studies show that for this concentration of hydrotropes a drastic reduction in the surfactant micellar radius occurs. Furthermore the luminescence of the hydrotrope used as a fluorescence probe indicates that at low concentrations p-toluene sulfonate dissolves in the surfactant micelles but beyond the minimum concentration for hydrotropic solubilization the hydrotrope is present in the aqueous phase. These results suggest that the hydrotropic effect is related to alterations in the water structure induced by the hydrotrope molecules and to the presence of hydrotrope aggregates that furnish an appropriate niche for the surfactant amphiphile.     

Quantification of free and total salicylic acid in plants by solid-phase extraction and isocratic high-performance anion-exchange chromatography

Salicylic acid (SA) is an important signaling compound in plants and is involved in various defense responses. Here we report a new method for quantification of free and total soluble SA in Arabidopsis thaliana with 5-fluorosalicylic acid (5-FSA) as internal standard. The SA was isolated from leaf extracts by solid-phase extraction with phenyl-phase cartridges and selectively eluted as the cationic iron(III)-complex. Recoveries of SA and 5-FSA were equal and exceeded 90%. Free SA was subsequently released from the iron(III)-complex by addition of 2,2-bipyridyl and high-performance anion-exchange chromatography was performed on an NH₂ column. The SA appeared as last peak with a retention time of 15 min, baseline-separated from other substances. On-line detection was performed fluorimetrically for both SA and 5-FSA at an excitation wavelength of 300 nm and an emission wavelength of 410 nm, because both substances give similar fluorescence spectra. The detection limit for SA was 5 ng g^–1 FW for a sample size of 100 mg. Thus the main advantages of the method are highly selective sample preparation, increased sensitivity, reduced analysis time compared with reversed-phase HPLC, and use of a novel internal standard detectable under the same conditions as SA. The techniques described are applicable to other plant materials.     

Grafting onto ultrafine ferrite particles: Reaction of isocyanate-capped polypropylene glycol with hydroxyl groups on the surface

The grafting of polypropylene glycol (PPG) onto an ultrafine ferrite by the reaction of hydroxyl groups on the surface with isocyanate-capped PPG (PPG-NCO), prepared by the reaction of an equimolecular amount of PPG with tolylene 2,4-diisocyanate, was investigated. When PPG-NCO (M _n=2.5×10³) was heated with the ferrite in bulk, the percentage of grafting onto the ferrite at 120 °C was increased up to 18.5%. On the contrary, the grafting by the reaction of PPG with hydroxyl groups on the ferrite at 120°C was scarcely observed. The grafted PPG onto the ferrite was removed by hydrolysis with a dilute methanol solution of potassium hydroxide. Therefore, it was considered that PPG was grafted onto the ferrite surface with urethane bond. The grafting of PPG onto the surface was also confirmed by infrared spectra. The reaction of PPG-NCO with the ferrite was accelerated by the addition of-picoline as a catalyst. PPG-grafted ferrite was found to produce a stable colloidal dispersion in organic solvents. Furthermore, the effect of molecular weight of PPG-NCO on the grafting onto the ferrite was discussed.     

Aggregation and Polymerization of PEG-Based Macromonomers with Methacryloyl Group as the Only Hydrophobic Segment

Aggregation behavior in aqueous solution of a series of poly (ethylene glycol) (PEG)-based macromonomers with methacryloyl group as the only hydrophobic segment has been investigated using surface tension, steady-state and time-resolved fluorescence spectroscopy using pyrene as a probe, and small-angle neutron scattering techniques. The general formula of these macromonomers is CH₂=C(CH₃)–CO–O–E_m–CH₃, where E is the ethylene glycol unit and m=8 (ME₈), 18 (ME₁₈), 49 (ME₄₉), and 120 (ME₁₂₀). The results indicate that a macromonomer with 8 ethylene glycol units forms as an aggregate above a certain critical concentration, which can be defined as critical aggregation concentration. The observed high value of I₁/I₃ in pyrene emission spectra at the interface of these aggregates and the inability to scatter a neutron beam by these aggregates indicate that the hydrophobic cluster formed by this macromonomer is remarkably solvated. ME₁₈ has a tendency to aggregate but others do not form any hydrophobic cluster. The homopolymerization behaviors of these macromonomers in an aqueous medium at 70°C are consistent with these possibi- lities.