Improvement of the analysis of the biochemical oxygen demand (BOD) of Mediterranean seawater by seeding control

Biochemical oxygen demand (BOD) is a useful parameter for assessing the biodegradability of dissolved organic matter in water. At the same time, this parameter is used to evaluate the efficiency with which certain processes remove biodegradable natural organic matter (NOM). However, the values of BOD in seawater are very low (around 2 mg O₂ L⁻¹) and the methods used for its analysis are poorly developed. The increasing attention given to seawater desalination in the Mediterranean environment, and related phenomena such as reverse osmosis membrane biofouling, have stimulated interest in seawater BOD close to the Spanish coast. In this study the BOD analysis protocol was refined by introduction of a new step in which a critical quantity of autochthonous microorganisms, measured as adenosine triphosphate, is added. For the samples analyzed, this improvement allowed us to obtain reliable and replicable BOD measurements, standardized with solutions of glucose-glutamic acid and acetate. After 7 days of analysis duration, more than 80% of ultimate BOD is achieved, which in the case of easily biodegradable compounds represents nearly a 60% of the theoretical oxygen demand. BOD₇ obtained from the Mediterranean Sea found to be 2.0 ± 0.3 mg O₂ L⁻¹ but this value decreased with seawater storage time due to the rapid consumption of labile compounds. No significant differences were found between two samples points located on the Spanish coast, since their organic matter content was similar. Finally, the determination of seawater BOD without the use of inoculum may lead to an underestimation of BOD.     

Syntheses, crystal structures and Raman spectra of Ba(BF4)(PF6), Ba(BF4)(AsF6) and Ba2(BF4)2(AsF6)(H3F4); the first examples of metal salts containing simultaneously tetrahedral BF4 and octahedral AF6 anions

In the system BaF₂/BF₃/PF₅/anhydrous hydrogen fluoride (aHF) a compound Ba(BF₄)(PF₆) was isolated and characterized by Raman spectroscopy and X-ray diffraction on the single crystal. Ba(BF₄)(PF₆) crystallizes in a hexagonal space group with a=10.2251(4) Å, c=6.1535(4) Å, V=557.17(5) Å³ at 200 K, and Z=3. Both crystallographically independent Ba atoms possess coordination polyhedra in the shape of tri-capped trigonal prisms, which include F atoms from BF₄⁻ and PF₆⁻ anions. In the analogous system with AsF₅ instead of PF₅ the compound Ba(BF₄)(AsF₆) was isolated and characterized. It crystallizes in an orthorhombic Pnma space group with a=10.415(2) Å, b=6.325(3) Å, c=11.8297(17) Å, V=779.3(4) Å³ at 200 K, and Z=4. The coordination around Ba atom is in the shape of slightly distorted tri-capped trigonal prism which includes five F atoms from AsF₆⁻ and four F atoms from BF₄⁻ anions. When the system BaF₂/BF₃/AsF₅/aHF is made basic with an extra addition of BaF₂, the compound Ba₂(BF₄)₂(AsF₆)(H₃F₄) was obtained. It crystallizes in a hexagonal P6₃/mmc space group with a=6.8709(9) Å, c=17.327(8) Å, V=708.4(4) Å³ at 200 K, and Z=2. The barium environment in the shape of tetra-capped distorted trigonal prism involves 10 F atoms from four BF₄⁻, three AsF₆⁻ and three H₃F₄⁻ anions. All F atoms, except the central atom in H₃F₄ moiety, act as μ₂-bridges yielding a complex 3-D structural network.     

Study on photocatalytic oxidation for determination of the low chemical oxygen demand using a nano-TiO2-Ce(SO4)2 coexisted system

A new photocatalytic system, nano-TiO₂-Ce(SO₄)₂ coexisted system, which can be used to determine the low chemical oxygen demand (COD) is described. Nano-TiO₂ powders is used as photocatalyst in this system. The measuring method is based on direct determination of the concentration change of Ce(IV) resulting from photocatalytic oxidation of organic compounds. The mechanism of the photocatalytic oxidation for COD determination was discussed and the optimum experimental conditions were investigated. Under the optimum conditions, a good calibration graph for COD values between 1.0 and 12 mg l⁻¹ was obtained and the LOD value was achieved as low as 0.4 mg l⁻¹. When determining the real samples, the results were in good agreement with those from the conventional methods.     

Preparation of photocatalytic nano-ZnO/TiO2 film and application for determination of chemical oxygen demand

A composite nano-ZnO/TiO₂ film as photocatalyst was fabricated with vacuum vaporized and sol-gel methods. The nano-ZnO/TiO₂ film improved the separate efficiency of the charge and extended the range of spectrum, which showed a higher efficiency of photocatalytic than the pure nano-TiO₂ and nano-ZnO film. The photocatalytic mechanism of nano-ZnO/TiO₂ film was discussed, too. A new method for determination of low chemical oxidation demand (COD) value in ground water based on nano-ZnO/TiO₂ film using the photocatalytic oxidation technology was founded. This method was originated from the direct determination of the Mn(VII) concentration change resulting from photocatalytic oxidation of organic compounds on the nano-ZnO/TiO₂ film, and the COD values were calculated from the absorbance of Mn(VII). Under the optimal operation conditions, the detection limit of 0.1 mg l⁻¹, COD values with the linear range of 0.3-10.0 mg l⁻¹ were achieved. The results were in good agreement with those from the conventional COD methods.     

Theoretical study of the triplet excited state of PtPOP and the exciplexes M-PtPOP (M = Tl, Ag) in solution and comparison with ultrafast X-ray scattering results

The [Pt₂(H₂P₂O₅)₄]⁴⁻ ions in the ground and excited states and the excited-state complexes M-[Pt₂(H₂P₂O₅)₄]³⁻ and M₂-[Pt₂(H₂P₂O₅)₄]²⁻ (M = Ag, Tl) were studied in solution with various density functional theory (DFT) functionals from Gaussian 09 and Amsterdam Density Functional (ADF) programs. Calculated results were compared with ultrafast X-ray solution scattering data. Time dependent DFT (TD-DFT) calculations with the B3PW91 functional and unrestricted open shell calculations with the mPBE functional produce good agreement with the experimental results. Compared to gas phase calculations, the surrounding solvent is found to play an important role to shorten the Pt-Pt and M-Pt (M = Ag, Tl) bond lengths, lowering the molecular orbital energies and influences the molecular orbital transitions upon excitation, which stabilizes the excited transient molecules in solution.     

丙炴醇聚合膜对铁在酸性溶液中的缓蚀作用

The formation of polymer film of propargyl alcohol(PA) and its protective ability against corrosion in Fe/H_2SO_4 and Fe/H_2SO_4+H_2S systems have been investigated using impedance measurement. The composition and morphology of the corrosion surface of iron, on which PA polymerized at different bines, were obtained with the aid of SEM and AFM as well as EDX. The results showed that PA polymerized into compact polymer film in Fe/H_2SO_4 and Fe/ H_2SO_4 + H_2S systems, which made iron surface smooth and have a morphologies of regular square structure in microscopic level. In Fe/H_2SO_4 system, macroscopic continuous polymer film of PA was not formed leading to local corrosion on electrode surface. In Fe/H_2SO_4 +H_2S system, the adsorption of H_2S and HS - on electrode surface slowed down the formation of polymer film of PA. However, the iron sulfide, produced after a longer time, increased the continuity of the polymer film of PA and therefore, the polymer film could perform its long-te...更多rm inhibition action.     

Removal of SO2 from Gas Streams by Oxidation using Plasma-Generated Hydroxyl Radicals

The key problem for the removal of SO₂ by electrical discharge methods is how to obtain the hydroxyl radicals at high concentration and large production rates. With the micro-gap discharge method, O₂ and H₂O in simulated gas streams (N₂/O₂/H₂O/SO₂) are ionized into a large number of OH^. radicals to oxidize SO₂ into SO₃ which reacts with H₂O forming H₂SO₄ droplets at 120 °C in the absence of any catalyst or absorbent. The droplets are captured with an electrostatic precipitator. As a result, conversion of SO₂ to primarily H₂SO₄ is limited by the generation of OH^. radicals. By increasing the reduced field and concentrations of O₂ and H₂O, the amount of OH^. radicals increase resulting in more removal of SO₂ from gas streams. The removal efficiency of SO₂ reaches 100% when the residence time is only 0.74 s. Therefore, a new gas-phase oxidation method for removal of SO₂ without NH₃ additive is found.     

Electrochemical behavior of hexafluoroniobate, heptafluorotungstate, and oxotetrafluorovanadate anions in N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide room temperature ionic liquid

Electrochemical behavior of hexafluoroniobate (Nb(V)F₆⁻), heptafluorotungstate (W(VI)F₇⁻), and oxotetrafluorovanadate (V(V)OF₄⁻) anions has been investigated in N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide (BMPyrTFSA) ionic liquid at 298 K by means of cyclic voltammetry and chronoamperometry. Cyclic voltammograms at a Pt electrode showed that Nb(V)F₆⁻ anion is reduced to Nb(IV)F₆²⁻ by a one-electron reversible reaction. Electrochemical reductions of W(VI)F₇⁻ and V(V)OF₄⁻ anions at a Pt electrode are quasi-reversible and irreversible reactions, respectively, according to cyclic voltammetry. The diffusion coefficients of Nb(V)F₆⁻, W(VI)F₇⁻ and V(V)OF₄⁻ determined by chronoamperometry are 1.34 × 10⁻⁷, 7.45 × 10⁻⁸ and 2.49 × 10⁻⁷ cm² s⁻¹, respectively. The Stokes radii of Nb(V)F₆⁻, W(VI)F₇⁻, and V(V)OF₄⁻ in BMPyrTFSA have been calculated to be 0.23, 0.38, and 0.12 nm, from the diffusion coefficients and viscosities obtained.     

Study of the vibrational spectra of SO2, H2O and D2O using the U(4) algebraic model

Using the U(4) algebraic model, in this work we report a study of the vibrational spectra of SO₂, H₂0¹⁸ and D₂O¹⁶. The inclusion of intermode couplings in algebraic models has been stated to give a deep insight into detailed spectroscopy for these bent XY₂ molecules. Improved set of algebraic parameters has been reported to provide improved RMS deviations for these molecules.     

Solvent-Free One-Pot Synthesis of Sulfonephthaleins from Saccharin and Phenols

Sulfonephthaleins can be synthesized in a single pot from saccharin and phenol via the in situ formation of 2-sulfobenzoic anhydride, followed by its reaction with phenol using H₂SO₄ as the condensing agent, in the absence of any solvent. This solvent-free synthesis is more economical and environmentally benign.     

Sensitive determination of verticine and verticinone in Bulbus Fritillariae by ionic liquid assisted capillary electrophoresis-electrochemiluminescence system

CE/Ru(bpy)₃²⁺ electrochemiluminescence (ECL) system with the assistance of ionic liquids (ILs) was successfully established for sensitive determination of verticine and verticinone in Bulbus Fritillariae for the first time. Migration behavior of alkaloid largely relies on the hydrogen bonding interactions between alkyl imidazolium cations in ILs and the alkaloids. Running buffer containing 40 mmol/L 1-butyl-3-methylimidazolium tetrafluoroborate (BMImBF₄) IL-8 mmol/L phosphate resulted in significant changes in separation selectivity for alkaloids with similar structures. The highest sensitivity of the detection was obtained by maintaining the detection potential at 1.2 V. Under the optimized conditions, relative standard derivations of the ECL intensity and the migration time were 3.27 and 2.84% for verticine and 4.42 and 1.69% for verticinone, respectively. The standard curves were linear between 1 × 10⁻⁸ and 1 × 10⁻⁶ mol/L for verticine and between 5 × 10⁻⁸ and 1 × 10⁻⁶ mol/L for verticinone, respectively. Detection limits of 1.25 × 10⁻¹⁰ mol/L for verticine and 1 × 10⁻¹⁰ mol/L for verticinone were obtained (S/N = 3). Developed method was successfully applied to determine the amounts of alkaloids in Bulbus Fritillariae.     

Effects of hydroxyl radicals and oxygen species on the 4-chlorophenol degradation by photoelectrocatalytic reactions with TiO2-film electrodes

The supported nano-TiO₂ electrode was prepared by sol–gel and hydrothermal method, and the photoelectrocatalytic degradation of 4-chlorophenol (4-CP) under UV irradiation has been investigated to reveal the roles of hydroxyl radicals and dissolved oxygen species for TiO₂-assisted photocatalytic reactions. The degradation kinetics, the formation and decay of intermediates, the isotopic tracer experiments with H₂O¹⁸, the removal yield of total organic carbon and the formation of active radical species in the presence of oxygen or not were examined by HPLC, GC–MS, TOC and spin-trap ESR spectrometry. It was found that most of OH radicals in the primary hydroxylated intermediates derived from the oxidation of adsorbed H₂O or HO⁻ by photo-holes in the electrochemically assisted TiO₂ photocatalytic system. It also indicates that the enhancement in the separation efficiency of photogenerated charges by applying a positive bias (+0.5 V vs SCE) has little role in the following decomposition and mineralization of these hydroxylated intermediates in the absence of oxygen. According to above experimental results, the pathway of 4-CP photocatalytic degradation was deduced initially. Due to the combined effect of OH radicals and dissolved oxygen species, the hydroxylated 4-chlorphenol, via cis, cis-3-chloromuconic acid, was decomposed into low molecular weight acid and CO₂.     

Influence of support acidity on electronic state of platinum in oxide systems promoted by SO4 2− anions

The electronic state of platinum supported on SO₄/ZrO₂, SO₄/TiO₂, SO₄/Al₂O₃, and SO₄/SiO₂ systems and on systems unpromoted by sulfur was investigated by diffuse-reflectance IR spectroscopy using CO as the probe molecule. The introduction of SO₄ ²⁻ anions increases the electron deficit on platinum particles. This suppresses the formation of bridging CO complexes with the metal, leads to the high-frequency shift of absorption maxima of CO adsorbed in the linear form, and stabilizes positively charged metal species (Pt^δ+ and Pt⁺) during the reduction process. The formation of the positively charged species includes the interaction between the acidic protons and the metal particles yielding [Pt−H]^δ+ adducts. The extent of the influence of the support on the electronic state of the metal increases in the series SO₄/SiO₂<SO₄/Al₂O₃<SO₄/TiO₂<SO₄/ZrO₂ in parallel with an increase in the strength of the acid sites in the system. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1094–1099, June, 1998.     

Correlation of the position of the bond functions in H-X with electronegativity

S type Gaussian bond functions are optimized for HF, H₂O, NH₃, and CH₄. The optimization is carried out with respect to the exponent and position in the H-X bond. The position is found to correlate well with the electronegativity of Pauling and Allred-Rochow.     

Nitrite formation in aerated aqueous azide solutions: A radiation chemical study

Gamma radiolysis of oxygenated 1–10 mM azide solutions was carried out at various pH values. In oxygenated 10 mM azide solutions, H₂O₂ and NO ₂ ⁻ were observed as radiolytic products while NH3 was not. The concentration of H₂O₂ reached its maximum level at a dose of 1 kGy, whereas NO ₂ ⁻ yield increased non-linearly beyond 2 kGy in this system. Both in aerated and oxygenated systems, G(NO ₂ ⁻ ) and G(H₂O₂) were found to vary with N ₃ ⁻ concentration. The yield of NO ₂ ⁻ was found to be dependent on both dose rate and pH. On pulse radiolysis, NO ₂ ⁻ was found as a radiolytic product in aerated 1 mM azide solution at pH 6.8. In this system the intermediate generated exhibits absorbance around 250 nm. The overall results obtained during the present study reveal that in presence of both reducing radical (mainly e _aq ⁻ ) and oxygen, N ₃ ⁻ produced an intermediate possibly NH₂O ₂ ^• radical, which is the prime source for NO ₂ ⁻ generation.     

Recent advances in fluorescent probes for the detection of reactive oxygen species

Reactive oxygen species (ROS) have captured the interest of many researchers in the chemical, biological, and medical fields since they are thought to be associated with various pathological conditions. Fluorescent probes for the detection of ROS are promising tools with which to enhance our understanding of the physiological roles of ROS, because they provide spatial and temporal information about target biomolecules in in vivo cellular systems. ROS probes, designed to detect specific ROS with a high selectivity, would be desirable, since it is now becoming clear that each ROS has its own unique physiological activity. However, dihydro-compounds such as 2′,7′-dichlorodihydrofluorescein (DCFH), which have traditionally been used for detecting ROS, tend to react with a wide variety of ROS and are not completely photostable. Some attractive fluorescent probes that exhibit a high degree of selectivity toward specific ROS have recently been reported, and these selective probes are expected to have great potential for elucidating unknown physiological mechanisms associated with their target ROS. This review focuses on the design, detection mechanism, and performance of fluorescent probes for the detection of singlet oxygen (¹O₂), hydrogen peroxide (H₂O₂), hydroxyl radicals (^.OH), or superoxide anion (O₂ ^−.), a field in which remarkable progress has been achieved in the last few years.     

Experimental and theoretical study of the hydration of phosphate groups in esters of biological interest

We have studied the influence of different groups esterified to phosphates on the strength of the interaction of the PO bond with one water molecule. Experimental vibrational spectra of PO(4)3-, HPO4(2-), H2PO4-, phosphoenolpiruvate (PEP) and ortho-phosphocholamine (o-PC) were obtained by means of FTIR spectroscopy. Geometry calculations were performed using standard gradient techniques and the default convergence criteria as implemented in GAUSSIAN 98 Program. In order to assess the behaviour of such DFT theoretical calculations using B3LYP with 6-31G* and 6-311++G** basis sets, we carried out a comparative work for those compounds. The results were then used to predict the principal bands of the vibrational spectra and molecular parameters (geometrical parameters, stabilisation energies, electronic density). In this work, the relative stability and the nature of the PO bond in those compounds were systematically and quantitatively investigated by means of Natural Bond Order (NBO) analysis. The topological properties of electronic charge density are analysed employing Bader's Atoms in Molecules theory (AIM). The hydrogen bonding of phosphate groups with water is highly stable and the PO bond wavenumbers are shifted to lower experimental and calculated values (with the DFT/6-311++G** basis set). Accordingly, the predicted order of the relative stability of the hydrogen bonding of the water molecule to the PO bond of the investigated compounds is: PO(4)3->HPO4(2-)>H2PO4->phosphoenolpiruvate>phosphocholamine for the two basis sets used.     

SO42-改性后的TiO2(锐钛和/或金红石)表面上MoO3的分散性质研究

采用红外(IR)、拉曼(Raman)、X-射线衍射(XRD)、程序升温还原(TPR)等方法考察了经硫酸根改性后的金红石(SR)与锐钛矿(SA)的混合比例变化时的负载型催化剂，MoO₃ / TiO₂(SR+SA)，的一些物理化学性质(如活性组分MoO₃的分散行为、表面酸碱性、氧化还原性)的变化规律。结果表明：对于MoO₃ / TiO₂(SR+SA)样品，低含量MoO₃表面分散时倾向于优先与混合载体中的改性金红石(SR)发生作用；TiO₂载体表面SO₄^2-的存在，使得载体表面产生了新的酸性位，导致样品中表面分散的钼物种主要以聚合八面体状态存在。     

H2SO4-Promoted Synthesis of (E)-Stilbenes from Substituted Phenylacetones and Substituted Benzaldehydes Through Tandem Aldol–Grob Reaction

Stilbene derivates (stilbenoids) are present in plants and show a wide range of biological activities and potential therapeutic value. In continuation of our natural product synthesis program, an efficient, simple, and practical method has been developed to regioselectively synthesize (E)-stilbenes using H₂SO₄ as a catalyst in a short time (30–60 s) at room temperature in good to excellent yields.

Evaluation of 4-amino-2-hydroxybenzoic acid as an eluent for indirect photometric determination of uncommon anions

Summary The efficacity of 4-amino-2-hydroxybenzoic acids as an eluent for the separation and determination of uncommon anions has been evaluated. The intensely absorbing eluent (λ_max 320 nm) offers a convenient indirect photometric approach to quantitate the species of interest in ppm and sub-ppm range. In the singlecolumn ion chromatography mode at 2 mM/2 mL/min and pH=6.0, clean separations of common and uncommon anions can be realized.