Square wave voltammetric determination of Hg(II) using thiol functionalized chitosan-multiwalled carbon nanotubes nanocomposite film electrode

Covalent tethering of cysteamine to chitosan using glutaraldehyde yields thiol-functionalized chitosan (CS-SH). It was cast on a glassy carbon electrode which is found to be very stable in acidic solutions and to possess a strong affinity for Hg(II) ions as confirmed by quartz crystal microbalance measurements. A glassy carbon electrode modified with a nanocomposite made from CS-SH and multiwalled carbon nanotubes was applied for square wave voltammetric determination of Hg(II). The procedure comprises the steps of (a) chemical accumulation of Hg(II) under open-circuit condition and (b) electrochemical determination of Hg(II). Linear responses are obtained in the range from 10 to 140 nM, with a limit of detection of 3 nM (S/N?=?3) under optimized conditions. The electrode was applied to the determination of Hg(II) in water samples with satisfactory recoveries.     

An amperometric method for the determination of trace mercury(II) by formation of complexes with l-tyrosine

A selective and sensitive amperometric method of analysis has been developed for determination of the trace amounts of mercury in waters at a platinum electrode based on the effect of the presence of mercury ions on the current due to oxidation of l-tyrosine. A decrease of signal was observed due to the formation of a complex of tyrosine with the Hg(II) ion adsorbed on the electrode surface. Several parameters were varied, such as applied potential, pH and concentration of tyrosine. The calibration plot was linear in the range from 0.02 to 3 μmol l⁻¹ Hg(II) with r=0.997 and the detection limit (3σ) was 0.014 μmol l⁻¹; the relative standard deviation was 2.2%. The study of interferences from other metal ions revealed a good selectivity of this method towards mercury(II). The stoichiometry of the mercury-tyrosine complex was determined to be 1:2 and the formation constant 627±19. Formation of complexes with mercury ions was also demonstrated with several catechol compounds and other amino acids. The method was applied to the analysis of contaminated waters.     

Square Wave Anodic Stripping Voltammetric Determination of Hg(II) with N1-Hydroxy-N1,N2-diphenylbenzamidine Modified Carbon Paste Electrode

Mercury is a highly toxic metal, of which even small doses (<200 ng mL⁻¹) can cause serious problems for humans, plants, animals and microorganisms, including marine species and freshwater organisms. Hence, a simple, fast, highly selective and sensitive and accurate method for the detection of mercury in the environmental, clinical or biological samples is necessary. A new, sensitive and selective method for the determination of Hg(II) with 5 % N¹-hydroxy-N¹,N²-diphenylbenzamidine modified carbon paste electrode has been developed. Hg(II) was accumulated for 210 s on the surface of the modified electrode using 0.1 M CH₃COONa of pH 7 at −0.8 V vs Ag/AgCl, followed by electrochemical stripping with SWASV in 0.1 M NH₄Cl at pH 4. The linear range is 0.02–10 μM Hg(II) with limit of detection of 1.28 nM. The method has RSDs of 3.7 %. The method was applied for the determination Hg(II) in five types of water samples. The recoveries were in the range 97.8–103 %. The proposed method was found to be highly selective and sensitive and has many attractive features compared to previous reports such as low cost, simplicity of electrode preparation, long term stability, fast response, easy renewable ability, and reasonable short accumulation time.     

金纳米颗粒@碳微球的制备及其电化学检测汞离子性能研究

本文研究了金纳米颗粒@碳微球(Au@CMSs)的制备及水环境中汞离子在该材料上的电化学行为. 实验结果表明,在0.1mol•L^-1 pH = 5.0的NaAc-HAc缓冲溶液中,采用方波伏安法测定汞离子,其浓度与氧化峰电流强度线性良好,相关系数为0.997,检出限为3.69 × 10^-8 mol•L^-1（3σ方法）.     

A highly selective colorimetric aqueous sensor for mercury

A new colorimetric mercury sensor is reported based on binding to terpyridine derivatives. It is able to selectively detect Hg II ions over a number of environmentally relevant ions including Ca II, Pb II, Zn II, Cd II, Ni II, Cu II, and others. The response time upon exposure to Hg II is instantaneous. By the "naked eye," the detection limit of Hg II is 2 ppm (25 microM) in solution. With a spectrometer, this detection limit is increased down to 2 ppb (25 nM), which is the current EPA standard for drinking water. The significant problem of mercury poisoning requires new methods of detection that are sensitive and selective. Here we report a new simple system that takes advantage of the unique optical properties generated by terpyiridine-Hg complexes.     

Palladium Particles‐Impregnated Natural Phosphate Electrodes for Electrochemical Determination of Mercury in Ambient Water Samples

We present here a simple procedure for the determination of mercury(II) using differential pulse anodic stripping voltammetry (DPASV) at palladium particles‐impregnated natural phosphate modified carbon paste electrodes (Pd‐NP‐CPE). The surface of modified electrode was characterized using SEM, infrared spectroscopy, X‐ray diffraction and electrochemical analysis. All experimental variables involved in the voltammetric stripping method were optimized. The detection limit was found to be 4.99×10^?8 mol L^?1 (S/N=3) that is not different to the permitted value for Hg(II) in water reported by the Environmental Protection Agency (EPA). The proposed electrode exhibits good applicability for monitoring Hg(II) in tap and wastewater.     

Preparation of a clay-modified carbon paste electrode based on 2-thiazoline-2-thiol-hexadecylammonium sorption for the sensitive determination of mercury.

A montmorillonite from Wyoming-USA was used to prepare an organo-clay complex, named 2-thiazoline-2-thiol-hexadecyltrimethylammonium-clay (TZT-HDTA-clay), for the purpose of the selective adsorption of the heavy metals ions and possible use as a chemically modified carbon paste electrode (CMCPE). Adsorption isotherms of Hg2+, Pb2+, Cd2+, Cu2+, and Zn2+ from aqueous solutions as a function of the pH were studied at 298 K. Conditions for quantitative retention and elution were established for each metal by batch and column methods. The organo-clay complex was very selective to Hg(II) in aqueous solution in which other metals and ions were also present. The accumulation voltammetry of Hg(II) was studied at a carbon paste electrode chemically modified with this material. The mercury response was evaluated with respect to the pH, electrode composition, preconcentration time, mercury concentration, "cleaning" solution, possible interferences and other variables. A carbon paste electrode modified by TZT-HDTA-clay showed two peaks: one cathodic peak at about 0.0 V and an anodic peak at 0.25 V, scanning the potential from -0.2 to 0.8 V (0.05 M KNO3 vs. Ag/AgCl). The anodic peak at 0.25 V presents excellent selectivity for Hg(II) ions in the presence of foreign ions. The detection limit was estimated as 0.1 microg L(-1). The precision of determination was satisfactory for the respective concentration level.     

Construction and Application of an Electrochemical Sensor for Simultaneous Determination of Cd(II), Cu(II) and Hg(II) in Water and Foodstuff Samples

By incorporation of synthesized magnetite nanoparticles (Fe₃O₄ NPs) coated with a new Schiff base into carbon paste electrode, a novel modified electrode was constructed for simultaneous determination of ultra trace amounts of Cd(II), Cu(II) and Hg(II). The complexation reaction of Schiff base with metal ions was studied spectrophotometrically. Under optimal conditions a detection limit of 0.20, 0.90 and 1.00 ng mL^?1 for Cd(II), Cu(II) and Hg(II), respectively, was obtained. We take the advantages of the proposed method for simple, rapid, sensitive and selective simultaneous determination of trace amounts of hazardous Cd(II), Cu(II) and Hg(II) in water and foodstuff samples.     

Metallated porphyrin noncovalent interaction with reduced graphene oxide‐modified electrode for amperometric detection of environmental pollutant hydrazine

A reduced graphene oxide/platinum(II) tetraphenylporphyrin nanocomposite (RGO/Pt‐TPP)‐modified glassy carbon electrode was developed for the selective detection of hydrazine. The RGO/Pt‐TPP nanocomposite was successfully prepared via noncovalent π–π stacking interaction. The prepared nanocomposite was characterized using nuclear magnetic resonance, electrochemical impedance, ultraviolet–visible and Raman spectroscopies, scanning electron microscopy and X‐ray diffraction. The electrochemical detection of hydrazine was performed via cyclic voltammetry and amperometry. The RGO/Pt‐TPP nanocomposite exhibited good electrocatalytic activity towards detection of hydrazine with low overpotential and high oxidation peak current. The fabricated sensor exhibited a wide linear range from 13 nM to 232 μM and a detection limit of 5 nM. In addition, the fabricated sensor selectively detected hydrazine even in the presence of 500‐fold excess of common interfering ions. The fabricated electrode exhibited good sensitivity, stability, repeatability and reproducibility. In addition, the practical applicability of the sensor was evaluated in various water samples with acceptable recoveries.     

Characterization of Mercury – Humic Acids Interaction by Potentiometric Titration with a Modified Carbon Paste Mercury Sensor

Stability constant for mercury binding by commercial and natural humic acids (HA) were determined using a new potentiometric mercury(II) sensor based on dithiosalicylic acid modified carbon paste electrode. The sensor present a high selective and sensitive response to mercury(II) ions, and a low detection limit of 1.8×10^?8 M. The potentiometric titrations curves of humic acids against mercury(II) ions were modeled. For 1.00×10^?7 to 3.00×10^?4 M mercury(II) ion concentration levels the results are consistent with the presence of two different binding sites in the humic acid macromolecule. The strongest binding sites (log K₁ ranging from 10.1 to 6.8) are probably due to interaction with carboxylic acid and amine groups in the molecule, whereas weakest binding sites (log K₂ ranging from 8.8 to 4.5) can be associated to phenolic groups.     

A Sensitive and Selective Nitrite Detection in Water Using Graphene/Platinum Nanocomposite

A glassy carbon electrode modified with reduced graphene oxide and platinum nanocomposite film was developed simply by electrochemical method for the sensitive and selective detection of nitrite in water. The electrochemical reduction of graphene oxide (GO) efficiently eliminates oxygen‐containing functional groups. Pt nanoparticles were electrochemically and homogeneously deposited on the ErGO surface. Field emission scanning electron microscopy (FE‐SEM), Raman spectroscopy, attenuated total reflectance‐fourier transform infrared spectroscopy (ATR‐FTIR), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) were used to examine the surface morphology and electrocatalytic properties of the Pt‐ErGO nanocomposite film‐modified electrode surface. The fabricated nitrite sensor showed good electrochemical performance with two linear ranges; one from 5 to 100 µM (R²=0.9995) and the other from 100 to 1000 µM (R²=0.9972) and a detection limit of 0.22 µM. The proposed sensor was successfully applied for the detection of nitrite in tap water samples which proves performance of the Pt‐ErGO nanocomposite films.     

Fabrication of a sensor chip containing Au and Ag electrodes and its application for sensitive Hg(II) determination using chronocoulometry

In this work, we explored a novel fabrication method to construct Au and Ag electrodes on chip, utilizing the different solubility of gold and silver in different etching solutions. KI-I₂ etching solution and 50% HNO₃ were chosen to dissolve the metal layers alternatively. Planar electrodes with gold and silver could be simultaneously and accurately patterned on chip using photolithographic technique. The as-prepared electrode could be directly served as integrated three-electrode system for electrochemical measurement. Based on it, a sensing strategy has been carried out using home-made electrochemical sensing (ECS) chip, which depended on the competition of double strand DNA and Hg(II)-mediated T–T base pairs (T-Hg(II)-T). Actually, a mercury specific oligonucleotide (MSO) was immobilized onto the thus-fabricated gold working electrode and employed as the sensing element. Chronocoulometry (CC) was chosen to monitor the differences of surface charge volume and quantify the concentrations of Hg(II) ions with a low detection limit down to 1 nM. Therefore, a facile method to fabricate Au and Ag electrodes has been demonstrated to simplify the production of ECS chip. The ECS chip was finally used for constructing an effective sensing platform for sensitive Hg(II) determination, which held promising potential for designing ECS chip in lab-on-a-chip device or point-of-care diagnosis.     

Simultaneous determination of Pt and Rh by catalytic adsorptive stripping voltammetry, using hexamethylene tetramine (HMTA) as complexing agent

Characteristics of the adsorption/electro-reduction of Pt/Rh hexamethylene tetramine (HMTA) complex on static mercury drop electrode surface were studied. Cyclic voltammetry was carried out to get the insight about the mechanistic behaviour of the catalytic current obtained in the voltammetric scan of Pt/Rh HMTA complex in acidic solution. Adsorptive stripping voltammetry using HMTA as the complexing agent was found to be highly sensitive method for the determination of Pt/Rh. Voltammetric measurements were carried out using hanging mercury drop electrode (HMDE) as the working electrode, a glassy carbon rod as the counter and an Ag/AgCl/KCl_saturated as the reference electrode. Various electrochemical parameters like deposition potential, deposition time, concentration of the ligand, supporting electrolyte etc. were optimized. The detection limit of Pt and Rh was found to be 4.38 pML⁻¹ and 2.80 pML⁻¹, respectively for the deposition time of 30 s. Simultaneous determination of Pt(II) and Rh(III) in water samples was possible. The method was found to be free from the commonly occurring interfering ions such as Cu(II), Cd(II), Zn(II), Pb(II), Cr(III), Cr(VI), Fe(III), Fe(II), Ni(II) and Co(II). Spike recovery tests for both Pt and Rh in tap water and sea water samples were also carried out. The method has been verified by analyzing certified reference material (WMG-1).     

聚对氨基苯磺酸/石墨烯修饰玻碳电极伏安法测定痕量汞

制备了对氨基苯磺酸/石墨烯复合膜修饰电极,研究了汞在修饰电极上的电化学行为。 在0.1 mol/L、pH=4.0的磷酸盐缓冲液中,以此修饰电极为工作电极,在-1.2 V搅拌富集5 min,用差分脉冲伏安法测定0.31 V处的溶出峰电流。 结果表明,该电极显著提高了汞离子的电化学响应信号。 在优化条件下,峰电流与Hg2+的浓度在1.0×10-6~5.0×10-4 mol/L范围内呈良好的线性关系,相关系数为0.995。 方法的检出限为5.0×10-7 mol/L。 将该法用于水样中痕量汞的测定,回收率为92.2%~105.2%。     

Stripping voltammetric detection of mercury(II) based on a surface ion imprinting strategy in electropolymerized microporous poly(2-mercaptobenzothiazole) films modified glassy carbon electrode

This work reports a surface ion imprinting strategy in electropolymerized microporous poly(2-mercaptobenzothiazole) (MPMBT) films at the surface of glassy carbon electrode (GCE) for the electrochemical detection of Hg(II). The Hg(II)-imprinted MPMBT/GCE exhibits larger binding to functionalized capacity, faster binding kinetics and higher selectivity to template Hg(II) due to their high ratio of surface-imprinted sites, larger surface-to-volume ratios, the complete removal of Hg(II) templates and larger affinity to Hg(II). The square wave anodic stripping voltammetry (SW ASV) response of the Hg(II)-imprinted MPMBT/GCE to Hg(II) is ca. 3.0 and 5.9 times larger than that at the direct imprinted poly(2-mercaptobenzothiazole) modified GCE and non-imprinted MPMBT/GCE sensor, respectively; and the detection limit for Hg(II) is 0.1 nM (which is well below the guideline value given by the World Health Organization). Excellent wide linear range (1.0–160.0 nM) and good repeatability (relative standard deviation of 2.5%) were obtained for Hg(II). The interference experiments showed that mercury signal was not interfered in the presence of Pb(II), Cd(II), Zn(II), Cu(II) and Ag(I), respectively. These values, particularly the high sensitivity and excellent selectivity compared favorably with previously reported methods in the area of electrochemical Hg(II) detection, demonstrate the feasibility of using the prepared Hg(II)-imprinted MPMBT/GCE for efficient determination of Hg(II) in aqueous environmental samples.     

A lead(II) sensor based on a glassy carbon electrode modified with Fe3O4 nanospheres and carbon nanotubes

We have developed a highly sensitive and selective sensor for lead(II) ions. A glassy carbon electrode was modified with Fe₃O₄ nanospheres and multi-walled carbon nanotubes, and this material was characterized by scanning electron microscopy and X-ray diffraction. The electrode displays good electrochemical activity toward Pb(II) and gives anodic and cathodic peaks with potentials at ?496 mV and ?638 mV (vs. Ag/AgCl) in pH?6.0 solution. The sensor exhibits a sensitive and fairly selective response to Pb(II) ion, with a linear range between 20 pM and 1.6 nM, and a detection limit as low as 6.0 pM (at a signal-to noise ratio of 3). The sensor was successfully applied to monitor Pb(II) in spiked water samples.

Determination of mercury traces by differential-pulse stripping voltammetry after sorption of mercury vapour on a gold-plated electrode

Trace mercury is reduced with tin(II) to mercury metal, which is volatilised by bubbling air through the solution. A certain fraction of this mercury is sorbed on a rotating gold disk electrode and stripped in a thiocyanate solution. The detection limit is about 30 ng Hg(II) in solution; the relative standard deviation is 6% for 100 ng Hg(II) (n = 7). The detection limit for mercury in air is 1.7 ng l^?1 with a preconcentration time of 10 min.     

Stripping voltammetric determination of mercury(II) at antimony-coated carbon paste electrode

A new procedure was elaborated to determine mercury(II) using an anodic stripping square-wave voltammetry at the antimony film carbon paste electrode (SbF-CPE). In highly acidic medium of 1 M hydrochloric acid, voltammetric measurements can be realized in a wide potential window. Presence of cadmium(II) allows to separate peaks of Hg(II) and Sb(III) and apparently catalyses reoxidation of electrolytically accumulated mercury, thus allowing its determination at ppb levels. Calibration dependence was linear up to 100 ppb Hg with a detection limit of 1.3 ppb. Applicability of the method was tested on the real river water sample.     

Biomass valorization of walnut shell into biochar as a resource for electrochemical simultaneous detection of heavy metal ions in water and soil samples: Preparation,characterization, and applications

Lately, due to its accessibility and eco-friendliness, walnut shell biochar (WS-BC) is gaining attention as an electrode material component in the electrochemical detection of water pollutants. The overall performance of WS-BC is reliant on the nature of raw biomass and the production methods as well. In our concept, biochar, prepared from raw walnut shell (WS) by pyrolysis, was added to a carbon paste electrode (CPE), and poly-tyrosine (p-Tyr) was electrodeposited on the surface of the BC-doped electrode. The conditions of the elaboration of the electrode, such as pH, potential, and the number of deposition cycles, pH were optimized. The obtained p-Tyr-BC-CPE platform was tested for the determination of cadmium, lead, copper, and mercury ions in water and soil samples, using square wave voltammetry (SWV). The raw WS biomass and its BC were examined by thermal analysis (TG-DSC), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDX) techniques. The synergistic effects of the coexistence of the WS-BC and the thin film of p-Tyr, for the detection of traces of heavy metal ions were investigated by electrochemical tests. The electrochemical characterization of the unmodified and modified electrodes was performed using the cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods, while the Cd²⁺, Pb²⁺, Cu^2+, and Hg²⁺ detection experiments were studied using the CV and SWV techniques. The optimized experimental conditions for the p-Tyr-BC-CPE platform were evaluated. The obtained electrochemical results showed that the p-Tyr-BC-CPE platform produced excellent sensitivity toward the heavy metal ions: LOD of 0.086, 0.175, 0.246, and 0.383 nM for Cd(II), Pb(II), Cu(II) and Hg(II), respectively. The modified electrode platform displayed high selectivity, stability, and good reproducibility.     

A new fully automated on-line digestion system for ultra trace analysis of mercury in natural waters by means of FI-CV-AFS

A fully automated flow injection (FI) system utilizing the extraordinary oxidation power of bromine monochloride (BrCl) for the transformation of dissolved mercury species to Hg(2+) and oxidation of dissolved organic carbon (DOC) has been developed and coupled to cold vapor (CV) atomic fluorescence spectrometry (AFS) for highly sensitive mercury detection. The system can be applied to natural waters, sea water as well as freshwater and provides a detection limit as low as 16 pg Hg l(-1) from a sample volume of 7 ml. The relative standard deviation is about 4-10%. A 3-fold measurement of one sample is completely processed within 15 min. Dissolved organic carbon, chloride and iodide ions are tolerated in concentrations of 15 mg DOC l(-1), >21 g Cl(-)l(-1), and 10 mg I(-)l(-1). Validation of the proposed method yielded a good recovery of total mercury in a moorland water sample and in the certified reference material ORMS-3, river water. Investigation of eight real water samples with mercury concentrations in the range of 0.3-1.4 ng l(-1) also confirmed the suitability of the proposed method.