Quantitative measurement of serum allergen-specific IgE on protein chip

Type I allergy is an immunoglobulin E (IgE)-mediated hypersensitivity disease inflicting more than quarter of the world population. In order to identify allergen sources, skin provocation test and IgE serology was performed using allergen extracts. Such process identifies allergen-containing sources but cannot identify the disease-eliciting allergenic molecules. Recently, microarray technology has been developed for allergen-specific IgE detection using rolling circle amplification. This study was carried out to evaluate protein chip technology for the quantitative measurement and limits of sensitivity of multiple allergen-specific IgE by an immunofluorescence assay. Significance of positive calibrators was tested using purified human IgE. Dermatophagoides pteronyssinus (Dp), egg white, milk, soybean, and wheat were used as allergens and human serum albumin as negative control. Sensitivity and clinical efficacy of protein chip were evaluated using allergy immune serum for Dp. The fluorescent intensities for purified human IgE as calibrator were well correlated with the concentrations of human IgE. Two-fold dilution of serum allowed an optimal reaction with Dp (1 mg/ml) at which serum Dp-specific IgE levels by protein chip were compatible with those by UniCap. The sensitivity of protein chip in this study was found at level of 1 IU/ml of IgE. Dp-specific IgE levels by protein chip correlated well with those of UniCap by comparing 10 atopic dermatitis. Additional 18 sera were tested for above multiple antigens other than Dp and significant results were obtained for many antigens as well as Dp. These results indicated that spotting of heterogeneous protein mixture on protein chip and the quantitative measurement of serum allergen-specific IgE levels using immunofluorescence assay can be successfully applied in the clinical laboratory for the diagnosis of allergy and could be applied to diagnosis of autoimmune and infectious diseases     

Optimization of critical factors affecting the performance of an allergen chip for the analysis of an allergen-specific human IgE in serum.

A sensitive and multiplexed assay of allergen-specific human immunoglobulin E (IgE) is of great significance in the precise diagnosis of allergies. We report on the optimization of critical factors for chip-based analysis of IgE in human serum with a high reliability. Extracts of two mite species were used as model allergens, and were spotted onto a glass slide for the construction of an allergen chip. Respective allergen-specific IgE in human serum was analyzed by using biotinylated anti-human IgE and a streptavidin-Cy3 conjugate. Factors affecting the performance of the allergen chip were investigated and optimized. Especially, the effect of additives, the concentrations of biotinylated anti-human IgE and the streptavidin-Cy3 conjugate, the serum dilution factor, and the concentration of allergen extract as a capturing agent were examined in detail. Under the optimized conditions, a chip-based analysis for sera from 43 patients revealed a reliable and reproducible diagnosis of respective allergies, showing a good correlation with a conventional CAP assay.     

A new time-resolved fluorometric microarray detection system using core–shell-type fluorescent nanosphere and its application to allergen microarray

We have developed a new time-resolved fluorometric (TRF) microarray detection system consisting of fluorescent NH₂ nanosphere, TRF microarray detector and gamma-irradiated polystyrene chip. Using the TRF microarray detector, we detected 500 particles of the fluorescent nanosphere in one channel. Cross-talk fluorescence from the adjacent channels was little observed in the TRF microarray detector (<0.0004 %). The TRF microarray detection system was further applied for serum allergen-specific immunoglobulin E (IgE) multi-analyses. As a labeled tag antibody, an anti-human IgE Fab’ fragment-conjugated fluorescent nanosphere (Fab’ nanosphere) was prepared as described previously. As a chip surface appropriate for allergen immobilization, the polystyrene chip surface was modified by gamma irradiation. The immunoassay reactivity using the gamma-irradiated polystyrene chip was approximately 2.5-times improved compared with that of the non-treated polystyrene chip. Non-specific adsorption of the Fab’ nanosphere onto the gamma-irradiated polystyrene chip surface was very low level (<0.0009 %). In only 20 μl of serum, six allergen-specific IgEs could be simultaneously determined in one reaction well in fewer than 90 min. Good correlation curves were obtained between the microarray immunoassay and the CAP RAST fluoro-enzyme immunoassay (CAP/RAST FEIA) method (r>0.961). Reproducibility (CVs) of the microarray immunoassay was 8.6 % to 19.0 % (n=5).     

Surface plasmon resonance-based immunoassay for procalcitonin

A surface plasmon resonance (SPR) biosensor has been developed for rapid immunoassay of procalcitonin (PCT) with high detection sensitivity and reproducibility. The 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDC)-activated protein A (PrA), diluted in 1% (v/v) 3-aminopropyltriethoxysilane (APTES) was dispensed on a KOH-treated Au-coated SPR chip, resulting in the covalent binding of PrA in 30 min. This “single-step” PrA immobilization strategy led to the oriented binding of the anti-PCT antibody (Ab) on a PrA-functionalized gold (Au) chip. The leach-proof immobilization procedure is five-fold faster than conventional counterparts, enabling high detection specificity and reproducibility. The IA detects 4–324 ng mL⁻¹ of PCT with a limit of detection (LOD) and a limit of quantification (LOQ) of 4.2 ng mL⁻¹ and 9.2 ng mL⁻¹, respectively. It was capable of detecting PCT in real sample matrices and patient samples with high precision. The Ab-bound SPR chips were stable for more than five weeks.     

Immuno-capture and in situ detection of Salmonella typhimurium on a novel microfluidic chip

The new method presented in this article achieved the goal of capturing Salmonella typhimurium via immunoreaction and rapid in situ detection of the CdSe/ZnS quantum dots (QDs) labeled S. typhimurium by self-assembly light-emitting diode-induced fluorescence detection (LIF) microsystem on a specially designed multichannel microfluidic chip. CdSe/ZnS QDs were used as fluorescent markers improving detection sensitivity. The microfluidic chip developed in this study was composed of 12 sample channels, 3 mixing zones, and 6 immune reaction zones, which also acted as fluorescence detection zones. QDs–IgG–primary antibody complexes were generated by mixing CdSe/ZnS QDs conjugated secondary antibody (QDs–IgG) and S. typhimurium antibody (primary antibody) in mixing zones. Then, the complexes went into immune reaction zones to label previously captured S. typhimurium in the sandwich mode. The capture rate of S. typhimurium in each detection zone was up to 70%. The enriched QDs-labeled S. typhimurium was detected using a self-assembly LIF microsystem. A good linear relationship was obtained in the range from 3.7 × 10 to 3.7 × 10⁵ cfu mL⁻¹ using the equation I = 0.1739 log (C) − 0.1889 with R² = 0.9907, and the detection limit was down to 37 cfu mL⁻¹. The proposed method of online immunolabeling with QDs for in situ fluorescence detection on the designed multichannel microfluidic chip had been successfully used to detect S. typhimurium in pork sample, and it has shown potential advantages in practice.     

Fc-specific biotinylation of antibody using an engineered photoactivatable Z–Biotin and its biosensing application

The development of a site-specific and covalent attachment methodology is crucial for antibody–biotin conjugates to preserve the antigen-binding ability of antibodies and yield homogeneous products. In this study, an engineered photoactivatable Z-domain variant [an UV-active amino acid benzoylphenylalanine (Bpa) was genetically incorporated into the Z-domain] carrying one biotin molecule (Z_Bpa–Biotin) was prepared by employing aminoacyl-tRNA synthetase/suppressor tRNA and Avitag/BirA techniques. The site-specific and covalent attachment of IgG–biotin conjugates, viz. photo-biotinylated IgG, was successfully achieved after UV exposure by combining the inherent Fc-binding capability of the Z-domain with the formation of covalent bond by the photo-crosslinker. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis assay showed that more than 90% of IgGs conjugated with Z_Bpa–Biotin molecules suffered 3 h UV irradiation. Further pepsin digestion analysis confirmed that the Z_Bpa–Biotin was conjugated to the Fc fragment of IgG without interference. We took the tumor biomarker carcinoembryoic antigen (CEA) as model to evaluate the detection efficiency of the site-specific photo-biotinylated IgG in biosensing application using surface plasmon resonance (SPR) technology. The photo-biotinylated IgG coated surface gave a limit of detection (LOD) of 2 ng mL^-1, is 5-fold lower than that of the randomly NHS-biotinylated IgG (10 ng mL^-1). Given that the (strept)avidin–biotin complex is extensively used in immunoassays, the proposed method for biotinylated IgG provides a powerful approach to further expand related applications.     

Continuous Immunoassay for Sulfamethazine by Surface Plasmon Resonance-Based Biosensor

Regeneration of the sensor chip surface is difficult in many surface plasmon resonance (SPR) biosensor assays. Improper regeneration will reduce life span of the sensor chip and decrease the quality of the data. Considering the advantages of reducing the regeneration frequency, a theoretically feasible continuous SPR biosensor immunoassay for sulfamethazine (SMT) was developed. In the continuous inhibitive immunoassay, the sensor chip surface is regenerated only once after a definite number of tests instead of every test. The SMT-bovine serum albumin (BSA) conjugate was covalently immobilized to a carboxymethyldextran modified gold film. The immobilization conditions of the antigen were studied and the working dilution of the antibody was optimized. The antibody was mixed with SMT of different concentrations prepared with PBS buffer to construct the calibration curve. The limit of detection was 0.5 ng mL^?1. The continuous SPR biosensor assay was proved to be simpler and more practical than a normal one.     

A novel antibody–antigen based impedimetric immunosensor for low level detection of HER2 in serum samples of breast cancer patients via modification of a gold nanoparticles decorated multiwall carbon nanotube-ionic liquid electrode

A highly sensitive impedimetric immunosensor based on a gold nanoparticles/multiwall carbon nanotube-ionic liquid electrode (AuNPs/MW-CILE) was developed for the determination of human epidermal growth factor receptor 2 (HER2). Gold nanoparticles were used to enhance the extent of immobilization and to retain the immunoactivity of the antibody Herceptin on the electrode. Cyclic voltammetry and electrochemical impedance spectroscopy were employed for characterization of various layers coated onto the AuNPs/MW-CILE. The impedance measurements at different steps were based on the charge transfer kinetics of the [Fe(CN)₆]^3−/4− redox pair. The immobilization of antibody and the corresponding antigen–antibody interaction at the electrode surface altered the interfacial electron transfer. The interactions of antibody with various concentrations of antigen were also monitored via the change of impedance response. The results showed that the charge transfer resistance increases linearly with increasing concentrations of HER2 antigen. The linear range and limit of detection were found as 10–110 ng mL⁻¹ and 7.4 ng mL⁻¹, respectively. The sensitivity and specificity of the immunosensor were validated. The results showed that the prepared immunosensor is a useful tool for screening of trace amounts of HER2 in serum samples of breast cancer patients.     

SERS detection of protein biochip fabricated by etching polystyrene template

In this study, a nanoscale protein chip is prepared by using an etched polystyrene (PS) template. This protein chip can be directly used for immunoassay, with the help of Surface Enhanced Raman Scattering (SERS) spectra. Some glass slides submerged in aldehyde is initially prepared, modified with antibodies, human immunoglobulin G (IgG). Then PS arrays are self-assembled on these slides with the Langmuir–Blodgett method. The PS template pattern is transferred to the human IgG substrate using an etching process—slides are exposed to O₂ plasma for 90 s. The PS nanoparticles are then washed away using phosphate buffered saline solution. Next, the slides are dipped into bovine serum albumin solution to ensure that the anti IgG would bond only to the human IgG. At this moment, a patterned protein chip is obtained. When used for protein detection, the protein chip could be immersed into labeled specificity antigen solution. Here we chose fluorescein isothiocyanate anti-human IgG. After washing, only bonded antigens remain. Fluorescence microscopy and SERS is used to characterize the samples. The SERS spectra intensity shows liner correlation with the concentration of anti-human IgG. All the experiments are conducted in a phosphate buffered saline solution at 37 °C for 2 h.     

A self-assembled fusion protein-based surface plasmon resonance biosensor for rapid diagnosis of severe acute respiratory syndrome

A surface plasmon resonance (SPR)-based biosensor was developed for simple diagnosis of severe acute respiratory syndrome (SARS) using a protein created by genetically fusing gold binding polypeptides (GBPs) to a SARS coronaviral surface antigen (SCVme). The GBP domain of the fusion protein serves as an anchoring component onto the gold surface, exploiting the gold binding affinity of the domain, whereas the SCVme domain is a recognition element for anti-SCVme antibody, the target analyte in this study. SPR analysis indicated the fusion protein simply and strongly self-immobilized onto the gold surface, through GBP, without surface chemical modification, offering a stable and specific sensing platform for anti-SCVme detection. AFM and SPR imaging analyses demonstrated that anti-SCVme specifically bound to the fusion protein immobilized onto the gold-micropatterned chip, implying that appropriate orientation of bound fusion protein by GBP resulted in optimal exposure of the SCVme domain to the assay solution, resulting in efficient capture of anti-SCVme antibody. The best packing density of the fusion protein onto the SPR chip was achieved at the concentration of 10 μg mL⁻¹; this density showed the highest detection response (906 RU) for anti-SCVme. The fusion protein-coated SPR chip at the best packing density had a lower limit of detection of 200 ng mL⁻¹ anti-SCVme within 10 min and also allowed selective detection of anti-SCVme with significantly low responses for non-specific mouse IgG at all tested concentrations. The fusion protein provides a simple and effective method for construction of SPR sensing platforms permitting sensitive and selective detection of anti-SCVme antibody.     

A comparative analysis of polyurethane hydrogel for immobilization of IgG on chips

Hydrogels are considered an optimum material for protein chip surfaces, since they provide a quasi-liquid environment which allows protein activity to be maintained and shows good spot morphology as well as excellent immobilization capacity. In the following, we present a polyurethane (PU) chip that electrostatically binds IgG. The PU surface is optimized with regard to layer thickness (∼200 nm), hydrogel (2%) and immobilized antibody concentration (0.5 mg mL⁻¹; 0.3 ng spot⁻¹), pH and ionic strength of the print buffer as well as to blocking solution. Evaluation is done in a direct IgG immunoassay using the Nexterion slide H as a reference. It is shown that higher IgG loading is achieved on the PU chip than on slide H, no matter whether 1× PBS (pH 7.2), Sörensen (pH 5.8) or Nexterion buffer was used as a spotting solution. Moreover, the crossreactivity with goat IgG, human IgG and monoclonal anti-CRP spotted in Nexterion buffer was as low as ≤0.74% (slide H: ≤3.34%).     

Amperometric carbohydrate antigen 19-9 immunosensor based on three dimensional ordered macroporous magnetic Au film coupling direct electrochemistry of horseradish peroxidase

A sandwich-type electrochemical immunosensor for the detection of carbohydrate antigen 19-9 (CA 19-9) antigen based on the immobilization of primary antibody (Ab₁) on three dimensional ordered macroporous magnetic (3DOMM) electrode, and the direct electrochemistry of horseradish peroxidase (HRP) that was used as both the label of secondary antibody (Ab₂) and the blocking reagent. The 3DOMM electrode was fabricated by introducing core–shell Au–SiO₂@Fe₃O₄ nanospheres onto the surface of three dimensional ordered macroporous (3DOM) Au electrode via the application of an external magnet. Au nanoparticles functionalized SBA-15 (Au@SBA-15) was conjugated to the HRP labeled secondary antibody (HRP-Ab₂) through the Au–SH or Au–NH₃⁺ interaction, and HRP was also used as the block reagent. The formation of antigen–antibody complex made the combination of Au@SBA-15 and 3DOMM exhibit remarkable synergistic effects for accelerating direct electron transfer (DET) between HRP and the electrode. Under the optimal conditions, the DET current signal increased proportionally to CA 19-9 concentration in the range of 0.05 to 15.65 U mL⁻¹ with a detection limit of 0.01 U mL⁻¹. Moreover, the immunosensor showed high selectivity, good stability, satisfactory reproducibility and regeneration. Importantly, the developed method was used to assay clinical serum specimens, achieving a good relation with those obtained from the commercialized electrochemiluminescent method.     

Regenerable immuno-biochip for screening ochratoxin A in green coffee extract using an automated microarray chip reader with chemiluminescence detection

Ochratoxin A (OTA) can contaminate foodstuffs in the ppb to ppm range and once formed, it is difficult to remove. Because of its toxicity and potential risks to human health, the need exists for rapid, efficient detection methods that comply with legal maximum residual limits. In this work we have synthesized an OTA conjugate functionalized with a water-soluble peptide for covalent immobilization on a glass biochip by means of contact spotting. The chip was used for OTA determination with an indirect competitive immunoassay format with flow-through reagent addition and chemiluminescence detection, carried out with the stand-alone automated Munich Chip Reader 3 (MCR 3) platform. A buffer model and real green coffee extracts were used for this purpose. At the present, covalent conjugate immobilization allowed for at least 20 assay-regeneration cycles of the biochip surface. The total analysis time for a single sample, including measurement and surface regeneration, was 12 min and the LOQ of OTA in green coffee extract was 0.3 μg L⁻¹ which corresponds to 7 μg kg⁻¹.     

Homogeneous immunoassay for human IgG using oriented hen egg IgY immobilized on gold sol nanoparticles

Homogeneous immunoassays using (red) gold nanoparticles represent an attractive detection scheme because of the option of photometric readout. We have applied oriented immobilization of hen egg immunoglobulin Y (IgY) on gold nanoparticles when developing a homogeneous immunoassay for human IgG. In oriented immobilization, as opposed to random immobilization, the antigen binding capabilities of the antibodies are retained. It is shown that such immunoassay has significantly better sensitivity in comparison with methods based on conventional immobilization of affinity-purified antibodies. It is also shown that hen egg IgY is better suited than rabbit antibodies, because much more antibody can be immobilized on gold nanoparticles without any destabilization, probably because of the more acidic nature of these antibodies. In addition, hen egg IgY can be supplied in higher quantity and can be prepared more easily than IgG from rabbits. Bleeding and slaughtering of animals is not needed. The assay presented here has a wide detection range (30–500?ng?.mL^?1) and a limit of detection as low as 30?ng.mL^?1 of human IgG.

Preparation and application of triangular silver nanoplates/chitosan composite in surface plasmon resonance biosensing

This paper reports the utilization of triangular silver nanoplates (TSNPs) to enhance the sensitivity of surface plasmon resonance (SPR) biosensor. TSNPs modified with 3-mercaptopropinic acid (MPA) were simply mixed with chitosan and glutaraldehyde to form TSNPs/chitosan composite. The composite was deposited on Au film as immobilization substrate for SPR biosensor. The novel structures of TSNPs are preserved against etching by MPA and chitosan polymer. Moreover, chitosan cross-linked by glutaraldehyde enables antibody to be immobilized on fabricated substrate directly via Schiff alkali reaction. In the optimized conditions, the resulting biosensor based on TSNPs/chitosan composite shows a satisfactory response to bovine IgG in the concentration range of 0.075–40.00 μg mL⁻¹. While the biosensor based on chitosan without TSNPs shows a response in the concentration range of 0.6–40 μg mL⁻¹ and the biosensor based on Au film shows a response in the concentration range of 2.5–40 μg mL⁻¹. The experiment results show that the sensitivity of SPR biosensor based on TSNPs/chitosan composite was significantly enhanced and the immobilization procedure of antibody was simplified.     

Disposable amperometric magnetoimmunosensor for the sensitive detection of the cardiac biomarker amino-terminal pro-B-type natriuretic peptide in human serum

A novel amperometric magnetoimmunosensor using an indirect competitive format is developed for the sensitive detection of the amino-terminal pro-B-type natriuretic peptide (NT-proBNP). The immunosensor design involves the covalent immobilization of the antigen onto carboxylic-modified magnetic beads (HOOC-MBs) activated with N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysulfosuccinimide (sulfo-NHS), and further incubation in a mixture solution containing variable concentrations of the antigen and a fixed concentration of an HRP-labeled detection antibody. Accordingly, the target NT-proBNP in the sample and that immobilized on the MBs compete for binding to a fixed amount of the specific HRP-labeled secondary antibody. The immunoconjugate-bearing MBs are captured by a magnet placed under the surface of a disposable gold screen-printed electrode (Au/SPE). The amperometric responses measured at –0.10 V (vs. a Ag pseudo-reference electrode), upon addition of 3,3′,5,5′-tetramethylbenzidine (TMB) as electron transfer mediator and H₂O₂ as the enzyme substrate, are used to monitor the affinity reaction. The developed magnetoimmunosensor provides attractive analytical characteristics in 10-times diluted human serum samples, exhibiting a linear range of clinical usefulness (0.12–42.9 ng mL⁻¹) and a detection limit of 0.02 ng mL⁻¹, which can be used in clinical diagnosis of chronic heart failure in the elderly and for classifying patients at risk of death after heart transplantation. The magnetoimmunosensor was successfully applied to the analysis of spiked human serum samples.     

Well-oriented ZZ–PS-tag with high Fc-binding onto polystyrene surface for controlled immobilization of capture antibodies

The site specificity and bioactivity retention of antibodies immobilized on a solid substrate are crucial requirements for solid phase immunoassays. A fusion protein between an immunoglobulin G (IgG)-binding protein (ZZ protein) and a polystyrene-binding peptide (PS-tag) was constructed, and then used to develop a simple method for the oriented immobilization of the ZZ protein onto a PS support by the specific attachment of the PS-tag onto a hydrophilic PS. The orientation of intact IgG was achieved via the interaction of the ZZ protein and the constant fragment (Fc), thereby displayed the Fab fragment for binding antigen. The interaction between rabbit IgG anti-horseradish peroxidase (anti-HRP) and its binding partner HRP was analyzed. Results showed that the oriented ZZ–PS-tag yielded an IgG-binding activity that is fivefold higher than that produced by the passive immobilization of the ZZ protein. The advantage of the proposed immunoassay strategy was demonstrated through an enzyme-linked immunosorbent assay, in which monoclonal mouse anti-goat IgG and HRP-conjugated rabbit F(ab′)₂ anti-goat IgG were used to detect goat IgG. The ZZ–PS-tag presented a tenfold higher sensitivity and a wider linear range than did the passively immobilized ZZ protein. The proposed approach may be an attractive strategy for a broad range of applications involving the oriented immobilization of intact IgGs onto PS supports, in which only one type of phi-PS (ZZ–PS-tag) surface is used.     

Immunosensors Based on Layer‐by‐Layer Self‐Assembled Au Colloidal Electrode for the Electrochemical Detection of Antigen

Colloidal Au particles have been deposited on the gold electrode through layer‐by‐layer self‐assembly using cysteamine as cross‐linkers. Self‐assembly of colloidal Au on the gold electrode resulted in an easier attachment of antibody, larger electrode surface and ideal electrode behavior. The redox reactions of [Fe(CN)₆]^4?/[Fe(CN)₆]^3? on the gold surface were blocked due to antibody immobilization, which were investigated by cyclic voltammetry and impedance spectroscopy. The interaction of antigen with grafted antibody recognition layers was carried out by soaking the modified electrode into a phosphate buffer at pH 7.0 with various concentrations of antigen at 37 °C for 30 min. Further, an amplification strategy to use biotin conjugated antibody was introduced for improving the sensitivity of impedance measurements. Thus, the sensor based on this immobilization method exhibits a large linear dynamic range, from 5–400 μg/L for detection of Human IgG. The detection limit is about 0.5 μg/L.     

Development and validation of an open screening method for diuretics,stimulants and selected compounds in human urine by UHPLC–HRMS for doping control

A new doping control screening method for the analysis of diuretics and stimulants using ultra high pressure liquid chromatography–high resolution Orbitrap mass spectrometry has been developed. The screening was performed in full scan MS with scan-to-scan polarity switching which allowed to detect more than 120 target analytes. Sample preparation was limited to 10-fold dilution of the urine into the internal standard solution followed by injection. Total run time per sample was 10 min. Validation of the method yielded detection limits for diuretics between 25 and 250 ng mL⁻¹ and for stimulants between 5 and 500 ng mL⁻¹. The screening method has been implemented in routine doping control.     

Real-time prostate-specific antigen detection with prostate-specific antigen imprinted capacitive biosensors

Prostate specific antigen (PSA) is a valuable biomarker for early detection of prostate cancer, the third most common cancer in men. Ultrasensitive detection of PSA is crucial to screen the prostate cancer in an early stage and to detect the recurrence of the disease after treatment. In this report, microcontact-PSA imprinted (PSA-MIP) capacitive biosensor chip was developed for real-time, highly sensitive and selective detection of PSA. PSA-MIP electrodes were prepared in the presence of methacrylic acid (MAA) as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as the cross-linker via UV polymerization. Immobilized Anti-PSA antibodies on electrodes (Anti-PSA) for capacitance measurements were also prepared to compare the detection performances of both methods. The electrodes were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM) and cyclic voltammetry (CV) and real-time PSA detection was performed with standard PSA solutions in the concentration range of 10 fg mL⁻¹–100 ng mL⁻¹. The detection limits were found as 8.0 × 10⁻⁵ ng mL⁻¹ (16 × 10⁻¹⁷ M) and 6.0 × 10⁻⁴ ng mL⁻¹ (12 × 10⁻¹⁶ M) for PSA-MIP and Anti-PSA electrodes, respectively. Selectivity studies were performed against HSA and IgG and selectivity coefficients were calculated. PSA detection was also carried out from diluted human serum samples and finally, reproducibility of the electrodes was tested. The results are promising and show that when the sensitivity of the capacitive system is combined with the selectivity and reproducibility of the microcontact-imprinting procedure, the resulting system might be used successfully for real-time detection of various analytes even in very low concentrations.