Demonstration of Quantum Entanglement Control Using Nuclear Magnetic Resonance

With the two forms of the quantum entanglement control, the quantum entanglement swapping and preservation are demonstrated in a three-qubit nuclear magnetic resonance quantum computer. The pseudopure state is prepared to represent the quantum entangled states through macroscopic signals. Entanglement swapping is directly realized by a swap operation. By controlling the interactions between the system and its environment,we can preserve an initial entangled state for a longer time. The experimental results are in agreement with the experiment.     

Realization of a Quantum Scheduling Algorithm Using Nuclear Magnetic Resonance

The quantum scheduling algorithm proposed by Grover is generalized to extend its scope of applications. The generalized algorithm proposed here is realized on a nuclear magnetic resonance quantum computer. The experimental results show that the generalized algorithm can work efficiently in the case that Grover‘s scheduling algorithm is completely invalid, and represent the quantum advantages when qubits replace classical bits.     

Influence of Nuclear Deformation on the Potential Energy Surface in Di—Nuclear Model

Influence of the nuclear deformation on the potential energy surface(PES) in a di-nuclear system is studied in details.It is found that the PES shape changes greatly due to the deformation effect.The top point of the PES could be reduced significantly,which implies that the optimum excitation energy could also be reduced greatly and may enhance the fromation probability of the compound nucleus.The dynamical deformaiton as a function of the reaction time in the reaction process is dramatic.The Z/N ratios of fragments tend to follow that of the compound nucleus during the nucleon exchange process,but to fluctuate.     

Realization of the Fredkin Gate by Three transition Pulses in a Nuclear Magnetic Resonance Quantum Information Processor

We have experimentally realized the Fredkin gate with only three transition pulses in a solution of alanine.It appears that no experimental realization of the Fredkin gate with fewer pulses has been reported yet.In addition,the simple structure of our scheme makes it easy to implement in experiments.     

Study of Fe85 –xCrxB15 (x = 0–20) Amorphous Alloys by the 11B Nuclear Magnetic Resonance Method

Doklady Physics - Amorphous alloys of Fe85 –xCrxB15 (x = 0–20) obtained by ultrafast melt quenching are investigated by the pulsed 11В nuclear magnetic resonance (NMR) method at a...     

Diffusion Coefficients of Several Rhodamine Derivatives as Determined by Pulsed Field Gradient–Nuclear Magnetic Resonance and Fluorescence Correlation Spectroscopy

Rhodamine derivatives are popular, photostable fluorophores that are used in a number of fluorescent based techniques, including fluorescence correlation spectroscopy (FCS). Indeed, in FCS, both rhodamine 6G (R6G) and rhodamine 110 (R110) are used as calibration standards to determine the dimensions of the instrument confocal volume. In spite of a requirement for precise values of the diffusion coefficients, literature values are scarce and vary over an order of magnitude. In this paper, the diffusion coefficients of four rhodamine fluorophores (rhodamine 6G (R6G), rhodamine B (RB), rhodamine 123 (R123), rhodamine 110 (R110)) were determined by pulsed field gradient nuclear magnetic resonance (PFG-NMR) spectrometry and then validated by comparison with fluorescence correlation spectroscopy. With the objective of validating the FCS calibration, diffusion coefficients of several dextrans and a polystyrene nanoparticle were also determined and compared with literature values or theoretical values that were based upon the Stoke–Einstein equation. The work presented here lead us to conclude that the diffusion coefficients for R6G and R110 have generally been underestimated in the literature. We propose revised values of 4.4 × 10⁻¹⁰ m² s⁻¹ for R110 and 4.0 × 10⁻¹⁰ m² s⁻¹ for R6G. Using the revised D value for R110 to calibrate the FCS instrument, diffusion coefficients have then been systematically determined for different conditions of pH, ionic strength and concentration. To correct for differences due to solvent effects (D₂O vs. H₂O), an isotopic correction factor, of 1.23, was determined from both FCS and from the solvent auto-diffusion coefficients obtained by NMR.     

Magnetic phase diagrams of Fe–Mn–Al alloy on the Bethe lattice

The magnetic behaviors of the Fe–Mn–Al alloy are simulated on the Bethe lattice by using a trimodal random bilinear exchange interaction(J) distribution in the Blume–Capel(BC) model. Ferromagnetic(J 0) or antiferromagnetic(J 0)bonds or dilution of the bonds(J = 0) are assumed between the atoms with some probabilities. It is found that the secondor the first-order phase boundaries separate the ferromagnetic(F), antiferromagnetic(AF), paramagnetic(P), or spin-glass(SG) phases from the possible other one. In addition to the tricritical points, the special points at which the second- and the first-order and the spin-glass phase lines meet are also found. Very rich phase diagrams in agreement with the literature are obtained.     

Hetero-Colloidal Metal Particle Multilayer Films Grown Using Electrostatic Interactions at the Air–water Interface

The formation of nanoparticle multilayer films by electrostatic immobilization of surface-modified colloidal particles at the air–water interface has been recently demonstrated by us. In this paper, we extend our study to show that multilayer assemblies consisting of metal particles of different chemical nature (hetero-colloidal particle superlattices) and size can be deposited by the versatile Langmuir–Blodgett technique. Multilayer films consisting of a different number of bilayers of gold and silver colloidal particles have been deposited and characterized using quartz crystal microgravimetry and UV–visible spectroscopy measurements. It is observed that while layer-by-layer deposition of the different colloidal particle assemblies is possible by this technique without a detectable variation in the cluster density in the different layers, a degree of post-deposition reorganization of the clusters occurs in the film. In addition to this aging behavior, the effect of different organic solvents on the reorganization process has also been studied.     

Influence of environment on the corrosion of glass–metal connections

‘Glass sensors’ of the eighteenth century Backer glass and the sixteenth century enamel from Limoges have been chosen for a series of experiments. Combinations of these materials with different base materials such as copper and bronze has been investigated. To create surface changes on the ‘glass sensor’, a corrosion process was induced in a controlled environment. A variety of corrosive agents such as hydrochloric acid, sulfuric acid, water and formaldehyde were used. The sample immersed in the corrosive solution was exposed alternately to light and high temperature for a total of 38 weeks. During this period, macroscopic and microscopic observations were made and series of tests such as SEM/EDS and Raman spectroscopy were performed on the surface of the samples. ICP-MS methods were used to determine the change in the chemical composition of the solutions where the samples had corroded. The primary aim of this study was to identify the impact of a number of external corrosive variables such as temperature, humidity and local environment to identify the most damaging environments for glass–metal objects. The obtained results showed the chemical and physical phenomena acting on the surface of the glass, metal or in the place of their joints. Information obtained on this study was used to explain the influence of the environment on the surface of glass–metal materials. Results can be used in the design of conservation work as well as for sustainable conservation.     

Magnetic properties of the Ashkin–Teller model on a hexagonal nanotube

A new theoretical model for nanomagnets represented by the Ashkin–Teller model on a core-shell hexagonal nanotube is proposed. The Mean Field Theory from the Bogoliubov inequality is applied to study the magnetizations, phase boundaries and tricritical points. For a positive couplings system (ferromagnetic), first order and continuous phase transitions between the stable, metastable and unstable states are observed. For a negative core-shell coupling system, only continuous phase transitions between the stable and unstable states are observed. The phase diagram is presented to illustrate the different phases and transitions exhibited by the model.     

The Influence of Defect Structure on Oxidation Rate of V–Cr–W–Zr Alloy During Heat Treatment in Air

Russian Physics Journal - The results of an investigation of the influence of microstructure on the oxidation rate of an alloy of the V–Cr–W–Zr system investigated under the...     

13C Nuclear Magnetic Resonance Studies of the Conformations of Serine‐3′‐ and 5′‐Thymidine Monophosphate Conjugates

The differences in the backbone conformation between O‐thymidine‐3′‐(1) and 5′‐yl O‐alkyl N‐phosphoryl serine methyl esters (2) have been investigated by solution ¹³C NMR spectroscopy. The stereo‐sensitive vicinal ³¹P–¹³C coupling constants were measured and used in the conformational analysis for the P–O5′–C5′, P–O3′–C3′, and P–N–C_α bonds. Three‐dimensional structural characteristics of dephosphorylation reactions of Compounds are also discussed.     

Pulsed Gradient Spin Echo Nuclear Magnetic Resonance Measurement and Simulation of Two-Fluid Taylor Vortex Flow in a Vertically Oriented Taylor–Couette Device

Magnetic resonance microscopy and Ansys Fluent^? computational fluid dynamics simulation have been used to classify Taylor vortex flows (TVF) for several single fluid and axially stratified two-fluid systems in a vertically oriented Taylor–Couette device. A Rheo-NMR (nuclear magnetic resonance) Couette system (Magritek Ltd, New Zealand) with a 1.05-mm gap was used to evaluate the transition from Couette flow to TVF in 1.65 cSt silicone oil, 1 cSt deionized water, and 0.65 cSt silicone oil. The rotation rate at which instability onset occurred agreed between experiment and simulation, as did the critical wavelength. Velocities were mapped for axially stratified two-fluid systems. The vortex containing the two-fluid interface was found to form with a significantly longer wavelength than that observed in the pure fluids. For experiments and simulations in the TVF regime, a region with no secondary flows was found at the interface, indicating interface stabilization by surface tension forces.     

Research on Quantum Effects of Coupled Double Resonance Circuit Using the Scheme of Gauss Propagator

The time evolvement of quantum state has been researched by the schemes of Louisell’s common canonical quantization and Gauss Propagator for mesoscopic coupled double resonance circuit with electrical sources. Moreover, the formulae of time evolvement wave function and transition probability of quantum state of this circuit are given. It is more significant for the quantitative analysis quantum character of mesoscopic circuit.