Effect of metal centres and substituents on the structure and optoelectronic properties of diarylethene compounds: A theoretical study

Diarylethene derivatives are a class of fascinating photochromic materials because of their open and closed isomers with different absorption spectra and many other characteristics.To reveal the detailed structure and optoelectronic properties as well as the effect of metal centres and substituents on them,a systematic study on a series of diarylethene derivatives and their Re(I),Pt(II),and Ir(III) complexes was performed via theoretical calculation.The optimized geometries,electronic properties,frontier molecular orbitals,ionization potentials,electron affinities,reorganization energies,and absorption spectra for both of their open-and closed-isomers have been calculated and analyzed.Metal-coordination and substituents exhibit great influence on the photophysical,charge-injection and-transporting characteristics.In addition,the binding of F-with the boron atom of dimesitylboryl group through Lewis acid/base interactions also induces great changes of structural,photophysical and electronic properties for these diarylethene derivatives,and consequently the compound with the substituent of dimesitylboryl group can be used as selective near-infrared phosphorescent F-probe.     

Bipolar molecules with high triplet energies: synthesis, photophysical, and structural properties

This article sheds new light on the interplay of electronic and conformational effects in luminescent bipolar molecules. A series of carbazole/1,3,4-oxadiazole hybrid molecules is described in which the optoelectronic properties are systematically varied by substituent effects which tune the intramolecular torsion angles. The synthesis, photophysical properties, cyclic voltammetric data, X-ray crystal structures, and DFT calculations are presented. Excited state intramolecular charge transfer (ICT) is observed from the donor carbazole/2,7-dimethoxycarbazole to the acceptor phenyl/diphenyloxadiazole moieties. Introducing more bulky substituents onto the diphenyloxadiazole fragment systematically increases the singlet and triplet energy levels (E(S) and E(T)) and blue shifts the absorption and emission bands. The triplet excited state is located mostly on the oxadiazole unit. The introduction of 2,7-dimethoxy substituents onto the carbazole moiety lowers the value of E(S), although E(T) is unaffected, which means that the singlet-triplet gap is reduced (for 7bE(S) - E(T) = 0.61 eV). A strategy has been established for achieving unusually high triplet levels for bipolar molecules (E(T) = 2.64-2.78 eV at 14 K) while at the same time limiting the increase in the singlet energy.     

Effect of axially projected oligothiophene pendants and nitro-functionalized diimine ligands on the lowest excited state in cationic Ir(III) bis-cyclometalates

The novel terthiophene (3T) oligomer 6 and a series of cationic Ir(III) bis-cyclometalates [Ir(C^N)(2)(N^N)]PF(6) 9-12 were prepared. The synthesis, characterization, electrochemical, and photophysical properties are reported. The cyclometalating ligands (C^N) are 2-phenylpyridinato (ppy) or the 3T oligomer (3T-ppy), asymmetrically capped in the 5 and 5" positions with the ppy and mesityl groups. The diimine ligands (N^N) are 2,2'-bipyridine (bpy) or 4-NO(2)-bipyridine (4-NO(2)-bpy). Hybrid metal-organic complexes 11 and 12 bear 3T-pendants ligated through the ppy cap, 10 and 12 contain NO(2) functionalized diimines, whereas 9 contains neither. Structural characterization of 10 by single crystal X-ray diffraction confirms the presence of the NO(2) substituent and pseudo-octahedral coordination geometry about the Ir(III) ion. Cyclic voltammetry highlights the large electron withdrawing effect of the NO(2) substituent, providing an 850 mV shift toward lower potentials for the first diimine centered reduction of 10 and 12. Strong overlap of the intense π → π* absorptions of the 3T-pendants with Ir(III) charge transfer bands is evident in complexes of 11 and 12, precluding the possibility for selective excitation of either chromophore. Photoexcitation (λ(ex) = 400 nm) of the series affords strong luminescence from the 3T oligomer 6 and the unsubstituted 9, with φ(em) = 0.11. In stark contrast the NO(2) and 3T functionalized complexes 10-12 display near total quenching of luminescence. Computations of the ground and excited state electronic structure using density functional theory (DFT) and time-dependent DFT (TD-DFT) indicate that both the NO(2) and 3T substituents play an important role in excited state deactivation of complexes 10-12. A substantial electronic contribution of the NO(2) substituent results in stabilization of the diimine based molecular orbital (MO) and offers an efficient nonradiative decay pathway for the excited state. Spin-orbit coupling effects of the Ir(III) ion lead to efficient population of the low lying, nonluminescent, triplet states centered on the 3T-pendants.     

The role of substituents on functionalized 1,10-phenanthroline in controlling the emission properties of cationic iridium(III) complexes of interest for electroluminescent devices

The photophysical and electrochemical properties of the novel complexes [Ir(ppy)(2)(5-X-1,10-phen)][PF(6)] (ppy = 2-phenylpyridine, phen = phenanthroline, X = NMe(2), NO(2)), [Ir(pq)(2)(5-X-1,10-phen)][PF(6)] (pq = 2-phenylquinoline, X = H, Me, NMe(2), NO(2)), [Ir(ppy)2(4-Me,7-Me-1,10-phen)][PF(6)], [Ir(ppy)2(5-Me,6-Me-1,10-phen)][PF(6)], [Ir(ppy)(2)(2-Me,9-Me-1,10-phen)][PF(6)], and [Ir(pq)2(4-Ph,7-Ph-1,10-phen)][PF(6)] have been investigated and compared with those of the known reference complexes [Ir(ppy)(2)(4-Me or 5-H or 5-Me-1,10-phen)][PF(6)] and [Ir(ppy)(2)(4-Ph,7-Ph-1,10-phen)][PF(6)], showing how the nature and number of the phenanthroline substituents tune the color of the emission, its quantum yield, and the emission lifetime. It turns out that the quantum yield is strongly dependent on the nonradiative decay. The geometry, ground state, electronic structure, and excited electronic states of the investigated complexes have been calculated on the basis of density functional theory (DFT) and time-dependent DFT approaches, thus substantiating the electrochemical measurements and providing insight into the electronic origin of the absorption spectra and of the lowest excited states involved in the light emission process. These results provide useful guidelines for further tailoring of the photophysical properties of ionic Ir(III) complexes.     

DFT/TDDFT Investigation of the Modulation of Photochromic Properties in an Organoboron‐Based Diarylethene by Fluoride Ions

The diarylethene derivative 1,2‐bis‐(5′‐dimesitylboryl‐2′‐methylthieny‐3′‐yl)‐cyclopentene ( 1 ) containing dimesitylboryl groups is an interesting photochromic material. The dimesitylboryl groups can bind to F^?, which tunes the optical and electronic properties of the diarylethene compound. Hence, the diarylethene derivative 1 containing dimesitylboryl groups is sensitive to both light and F^?, and its photochromic properties can be tuned by a fluoride ion. Herein, we studied the substituent effect of dimesitylboron groups on the optical properties of both the closed‐ring and open‐ring isomers of the diarylethene molecule by DFT/TDDFT calculations and found that these methods are reliable for the determination of the lowest singlet excitation energies of diarylethene compounds. The introduction of dimesitylboron groups to the diarylethene compound can elongate its conjugation length and change the excited‐state properties from π→π* transition to a charge‐transfer state. This explains the modulation of photochromic properties through the introduction of dimesitylboron groups. Furthermore, the photochromic properties can be tuned through the binding of F^? to a boron center and the excited state of the diarylethene compound is changed from a charge‐transfer state to a π→π* transition. Hence, a subtle control of the photochromic spectroscopic properties was realized. In addition, the changes of electronic characteristics by the isomerization reaction of diarylethene compounds were also investigated with theoretical calculations. For the model compound 2 without dimesitylboryl groups, the closed‐ring isomer has better hole‐ and electron‐injection abilities, as well as higher charge‐transport rates, than the open‐ring isomer. The introduction of dimesitylboron groups to diarylethene can dramatically improve the charge‐injection and ‐transport abilities. The closed isomer of compound 1 ( 1 C ) has the best hole‐ and electron‐injection abilities, whereas the charge‐transport rates of the open isomer of compound 1 ( 1 O ) are higher than those of 1 C . Importantly, 1 O is an electron‐accepting and ‐transport material. These results show that the diarylethene compound containing dimesitylboryl groups has promising potential to be applied in optoelectronic devices and thus is worth to be further investigated.     

含咔唑生色团的有机芳香杂环分子的二阶非线性光学性质

采用密度泛函理论B3LYP/6-31G^*方法, 对一系列含咔唑生色团的有机芳香杂环分子进行结构优化, 并采用有限场(FF)和含时密度泛函理论(TD-DFT)方法在6-311G^**水平上探讨了体系的二阶非线性光学(NLO)性质和电子光谱. 结果表明, 咔唑取代基推或拉电子能力的改变和引入芳香杂环对研究分子的极化率α和二阶NLO系数β值都有较大影响. 当取代基分别连有拉电子硝基和推电子羟基, 以及引入呋喃杂环都可以使体系分子的β值随分子的最大吸收波长λ_max的增大而减小(蓝移). 该系列化合物兼具有很大的二阶非线性响应与良好的透光范围, 避免了“非线性-透光性”矛盾, 可能在非线性材料领域中有很大的潜在应用价值.     

Electron-donor substituents on the dppz-based ligands to control luminescence from dark to bright emissive state in Ir(III) complexes

The structures and electronic properties of a series of cyclometalated Ir(III) complexes with substituted dppz ancillary ligand (dppz: dipyrido[3,2-a:2′,3′-c]phenazine) including tert-butyl, pyrrolidine ring, and alkoxys substituents as donor group have been theoretically study. With the aim of highlight the attractive qualities of each system for their use as luminescent material, the effects of the electron-donor substituents onto dppz was evaluated on the structural, charge transport, absorption, and phosphorescent properties. The effect of the substituent was studied on the modulation of the bright and dark triplet states. Main results show that ortho-methoxy and tert-butyl substituents act as lower electron-donating groups, then, efficient electron donation ability was displayed with alkoxy (ethoxy and propoxy) substituents. The best performance was found in a complex with pyrrolidine ring according since their phosphorescence is favored, highlighting their larger electric transition dipole moment value, proposing this system as potential candidate to LEC technology.     

Structural,Electronic and Optical Properties of Multifunctional Iridium(III) and Platinum(II) Metallophosphors for Organic Light‐Emitting Diodes

An elaborated theoretical investigation on the optical and electronic properties of three fluorene‐based platinum(II) and iridium(III) cyclometalated complexes Pt‐a , Ir‐a and Ir‐b is reported. The geometric and electronic structures of the complexes in the ground state are studied with density functional theory and Hartree Fock approaches, while the lowest triplet excited states are optimized by singles configuration interaction (CIS) methods. At the time‐dependent density functional theory (TD‐DFT) level, molecular absorption and emission properties were calculated on the basis of optimized ground‐ and excited‐state geometries, respectively. The computational results show that the appearance of triphenylamino (TPA) moiety at the 9‐position of fluorene ring favors the hole‐creation and leads to red‐shifts of absorption and emission spectra. Moreover, Pt‐a and Ir‐b are nice hole‐transporting materials whereas Ir‐a has good charge‐transfer balance, which render them useful for the realization of efficient OLEDs (Organic Light‐Emitting Diodes).     

Influence of halogen atoms on a homologous series of bis-cyclometalated iridium(III) complexes

A series of homologous bis-cyclometalated iridium(III) complexes Ir(2,4-di-X-phenyl-pyridine)(2)(picolinate) (X = H, F, Cl, Br) HIrPic, FIrPic, ClIrPic, and BrIrPic has been synthesized and characterized by NMR, X-ray crystallography, UV-vis absorption and emission spectroscopy, and electrochemical methods. The addition of halogen substituents results in the emission being localized on the main cyclometalated ligand. In addition, halogen substitution induces a blue shift of the emission maxima, especially in the case of the fluoro-based analogue but less pronounced for chlorine and bromine substituents. Supported by ground and excited state theoretical calculations, we rationalized this effect in a simple manner by taking into account the σp and σm Hammett constants on both the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy levels. Furthermore, in comparison with FIrPic and ClIrPic, the impact of the large bromine atom remarkably decreases the photoluminescence quantum yield of BrIrPic and switches the corresponding lifetime from mono to biexponential decay. We performed theoretical calculations based on linear-response time-dependent density functional theory (LR-TDDFT) including spin-orbit coupling (SOC), and unrestricted DFT (U-DFT) to obtain information about the absorption and emission processes and to gain insight into the reasons behind this remarkable change in photophysical properties along the homologous series of complexes. According to theoretical geometries for the lowest triplet state, the large halogen substituents contribute to sizable distortions of specific phenylpyridine ligands for ClIrPic and BrIrPic, which are likely to play a role in the emissive and nonradiative properties when coupled with the heavy-atom effect.     

Controlling phosphorescence color and quantum yields in cationic iridium complexes: a combined experimental and theoretical study

We report a combined experimental and theoretical study on cationic Ir(III) complexes for OLED applications and describe a strategy to tune the phosphorescence wavelength and to enhance the emission quantum yields for this class of compounds. This is achieved by modulating the electronic structure and the excited states of the complexes by selective ligand functionalization. In particular, we report the synthesis, electrochemical characterization, and photophysical properties of a new cationic Ir(III) complex, [Ir(2,4-difluorophenylpyridine)2(4,4'-dimethylamino-2,2'-bipyridine)](PF(6)) (N969), and compare the results with those reported for the analogous [Ir(2-phenylpyridine)2(4,4'-dimethylamino-2,2'-bipyridine)](PF(6)) (N926) and for the prototype [Ir(2-phenylpyridine)2(4,4'-tert-butyl-2,2'-bipyridine)](PF(6)) complex, hereafter labeled N925. The three complexes allow us to explore the (C/\N) and (N/\N) ligand functionalization: considering N925 as a reference, we investigate in N926 the effect of electron-releasing substituents on the bipyridine ligand, while in N969, we investigate the combined effect of electron-releasing substituents on the bipyridine ligand and the effect of electron-withdrawing substituents on the phenylpyridine ligands. For N969 we obtain blue-green emission at 463 nm with unprecedented high quantum yield of 85% in acetonitrile solution at room temperature. To gain insight into the factors responsible for the emission color change and the different quantum yields, we perform DFT and TDDFT calculations on the ground and excited states of the three complexes, characterizing the excited-state geometries and including solvation effects on the calculation of the excited states. This computational procedure allows us to provide a detailed assignment of the excited states involved in the absorption and emission processes and to rationalize the factors determining the efficiency of radiative and nonradiative deactivation pathways in the investigated complexes. This work represents an example of electronic structure-driven tuning of the excited-state properties, thus opening the way to a combined theoretical and experimental strategy for the design of new iridium(III) phosphors with specific target characteristics.     

Synthesis,One‐ and Two‐Photon Photophysical and Excited‐State Properties,and Sensing Application of a New Phosphorescent Dinuclear Cationic Iridium(III) Complex

A new phosphorescent dinuclear cationic iridium(III) complex ( Ir1 ) with a donor–acceptor–π‐bridge–acceptor–donor (D? A? π? A? D)‐conjugated oligomer ( L1 ) as a N^N ligand and a triarylboron compound as a C^N ligand has been synthesized. The photophysical and excited‐state properties of Ir1 and L1 were investigated by UV/Vis absorption spectroscopy, photoluminescence spectroscopy, and molecular‐orbital calculations, and they were compared with those of the mononuclear iridium(III) complex [Ir(Bpq)₂(bpy)]⁺PF₆^? ( Ir0 ). Compared with Ir0 , complex Ir1 shows a more‐intense optical‐absorption capability, especially in the visible‐light region. For example, complex Ir1 shows an intense absorption band that is centered at λ=448 nm with a molar extinction coefficient (ε) of about 10⁴, which is rarely observed for iridium(III) complexes. Complex Ir1 displays highly efficient orange–red phosphorescent emission with an emission wavelength of 606 nm and a quantum efficiency of 0.13 at room temperature. We also investigated the two‐photon‐absorption properties of complexes Ir0 , Ir1 , and L1 . The free ligand ( L1 ) has a relatively small two‐photon absorption cross‐section (δ_max=195 GM), but, when complexed with iridium(III) to afford dinuclear complex Ir1 , it exhibits a higher two‐photon‐absorption cross‐section than ligand L1 in the near‐infrared region and an intense two‐photon‐excited phosphorescent emission. The maximum two‐photon‐absorption cross‐section of Ir1 is 481 GM, which is also significantly larger than that of Ir0 . In addition, because the strong B? F interaction between the dimesitylboryl groups and F^? ions interrupts the extended π‐conjugation, complex Ir1 can be used as an excellent one‐ and two‐photon‐excited “ON–OFF” phosphorescent probe for F^? ions.     

Efficient blue‐emitting Ir(III) complexes with phenyl‐methyl‐benzimidazolyl and picolinate ligands: A DFT and time‐dependent DFT study

The series of heteroleptic cyclometalated Ir(III) complexes for organic light‐emitting display application have been investigated theoretically to explore their electronic structures and spectroscopic properties. The geometries, electronic structures, and the lowest‐lying singlet absorptions and triplet emissions of Ir‐(pmb)₃ and theoretically designed models Ir‐(Rpmb)₂pic were investigated with density functional theory (DFT)‐based approaches, where pmb = phenyl‐methyl‐benzimidazolyl, pic = picolinate, and R = H/F. Their structures in the ground and excited states have been optimized at the DFT/B3LYP/LANL2DZ and TDDFT/B3LYP/LANL2DZ levels, and the lowest absorptions and emissions were evaluated at B3LYP and M062X level of theory, respectively. The mobility of holes and electrons were studied computationally based on the Marcus theory. Calculations of ionization potentials were used to evaluate the injection abilities of holes into these complexes. The reasons for the higher electroluminescence efficiency and phosphorescence quantum yields in Ir‐(Rpmb)₂pic than in Ir‐(pmb)₃ have been investigated. The designed moleculars are expected to be highly emissive in pure‐blue region. © 2013 Wiley Periodicals, Inc.     

Substituent effect on the photophysical properties, electrochemical properties and electroluminescence performance of orange-emitting iridium complexes

A series of bis(2-phenylbenzothiozolato-N,C(2'))iridium(acetylacetonate) [(bt)(2)Ir(acac)] derivatives, 1-4, were synthesized. Different substituents (CF(3), F, CH(3), OCH(3)) were introduced in the benzothiazole ring to study the substituent effect on the photophysical, electrochemical properties and electroluminescent performance of the complexes, and finally to select high-performance phosphors for use in organic light-emitting diodes (OLEDs). All complexes 1-4 and (bt)(2)Ir(acac) are orange-emitting with tiny spectral difference, despite the variation of the substituent. However, the phosphorescent quantum yield increases with the electron-withdrawing ability of the substituent. This is in contrast to the previous observation that the substituent in the phenyl ring bonded to the metal center of (bt)(2)Ir(acac) not only affected the luminescent quantum efficiency but also greatly tuned the emission color of the complexes. Quantum chemical calculations revealed that the substituents in this position do not make a significant contribution to both the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), which probably accounts for the fact that they do no strongly influence the bandgap and emission color of the complexes. Orange OLEDs were fabricated using 1-4 as doped emitters. The electron-withdrawing CF(3) and F groups favor improving the electroluminescence efficiency in comparison with that of the parent (bt)(2)Ir(acac), while electron-donating CH(3) and OCH(3) are not favorable for light emission. The complex 1 based OLED exhibited a maximum luminance efficiency of 54.1 cd A(-1) (a power efficiency of 24 lm W(-1) and an external quantum efficiency of 20%), which are among the best results ever reported for vacuum deposited orange OLEDs so far.     

Synthesis, optophysical and electrochemical properties of bipolar-transporting europium(III) complexes with carbazole and oxadiazole units

A series of bipolar-transporting europium(III) complexes containing carbazole and oxadiazole units were synthesized and characterized. Two intense UV absorption bands at around 286 nm and 352 nm, and sharply red emissions peaked at 614 nm were observed for these europium complexes in dichloromethane. Importantly, the bipolar-transporting europium(III) complexes exhibited higher thermal stability, more intense UV absorption at 286 nm and twofold increased photoluminescent quantum yield compared to the reported red chromophore of tri(dibenzoylmethane) (1,10-phenanthroline) europium(III).     

Theoretical study on the influence of ancillary and cyclometalated ligands on the electronic structures and optoelectronic properties of heteroleptic iridium(III) complexes

We report a theoretical analysis of a series of heteroleptic iridium(III) complexes (dox)(2)Ir(acac) [dox = 2,5-diphenyl-1,3,4-oxadiazolato-N,C(2), acac = acetylacetonate] (1a), (fox)(2)Ir(acac) [fox = 2,5-bis(4-fluorophenyl)-1,3,4-oxadiazolato-N,C(2)] (1b), (fox)(2)Ir(Et(2)dtc) [Et(2)dtc = N,N'-diethyldithiocarbamate] (2), (fox)(2)Ir(Et(2)dtp) [Et(2)dtp = O,O'-diethyldithiophosphate] (3), (pypz)(2)Ir(acac) [pypz = 3,5-di(2-pyridyl)pyrazole] (4a), (O-pypz)(2)Ir(acac) (4b), (S-pypz)(2)Ir(acac) (4c) and (bptz)(2)Ir(acac) [bptz = 3-tert-butyl-5-(2-pyridyl)triazole] (5) by using the density functional theory (DFT) method to investigate their electronic structures and photophysical properties and obtain further insights into the phosphorescent efficiency mechanism. Meanwhile, we also investigate the influence of ancillary and cyclometalated ligands on the properties of the above complexes. The results reveal that the nature of the ancillary ligands can influence the electron density distributions of frontier molecular orbitals and their energies, resulting in change in transition character and emission color, while the different cyclometalated ligands have a large impact on the charge transfer performances of the studied complexes. The calculated absorption and luminescence properties of the four complexes 1a, 1b, 2 and 3 are compared with the available experimental data and a good agreement is obtained. Further, the assumed complexes 4a and 4b possess better charge transfer abilities and more balanced charge transfer rates, and they are potential candidates as blue-emitting materials.     

Computational studies on the injection,transport, absorption,and phosphoresce properties of a series of cationic iridium (III) complexes [Ir(C∧N)2(L)2]+ (C∧N = ppy,tpy, dfppy,bzq)

Quantum chemistry methods are applied to investigate the electronic structures, injection and transport properties, absorption and phosphorescence mechanism of a series of Iridium (III) complexes [Ir(C∧N)₂(L)₂]⁺ (L = 4‐pyCO₂Et; C∧N = 2‐phenylpyridine, 1 ; 2‐(4‐tolyl)pyridine, 2 ; 2‐(4,6‐difluorophenyl)pyridimato, 3 ; benzoquinoline, 4 ), which may be used as emitters on organic light emitting diodes (OLEDs). Calculations of ionization potentials and electron affinities are used to evaluate the injection abilities of holes and electrons into these complexes. The reorganization energy (λ) calculations show that the four complexes are suitable as emitters in OLEDs. The absorptions and emissions can be tuned by adding substituent to the ppy ligand or extending the π‐conjugation effect of the C∧N ligand, and quantum yields of 1 – 4 are investigated. In addition, no solvent effect is observed in the absorption and emission spectra. © 2012 Wiley Periodicals, Inc.     

Highly selective phosphorescent chemosensor for fluoride based on an iridium(III) complex containing arylborane units

A new phosphorescent iridium(III) complex [Ir(Bpq)2(bpy)](+)PF6(-) based on cyclometalated ligands (Bpq) containing a dimesitylboryl group was synthesized and characterized by photophysical and electrochemical studies. The excited-state properties of Bpq and [Ir(Bpq)2(bpy)](+)PF6(-) were investigated using molecular orbital calculations. Importantly, both Bpq and [Ir(Bpq)2(bpy)](+)PF6(-) could be used as highly selective chemosensors for a fluoride anion (F(-)) detected by the naked eye, owing to the interaction of the dimesitylboryl group (BMes2) with F(-). For the Bpq ligand, a red shift of the emission spectrum was observed upon the addition of F(-), which could be attributed to an excited-state switch from a pi-pi* transition to a charge-transfer transition upon complexation with F(-). The addition of F(-) to a solution of [Ir(Bpq)2(bpy)](+)PF6(-) induced a change in the solution color from yellow to orange-red and phosphorescent quenching, indicating that [Ir(Bpq)2(bpy)](+)PF6(-) could act as an excellent ON-OFF-type phosphorescent chemosensor for F(-).     

Phosphorescent binuclear iridium complexes based on terpyridine-carboxylate: an experimental and theoretical study

The phosphorescent binuclear iridium(III) complexes tetrakis(2-phenylpyridine)μ-(2,2':6',2'-terpyridine-6,6'-dicarboxylic acid)diiridium (Ir1) and tetrakis(2-(2,4-difluorophenyl) pyridine))μ-(2,2':6',2'-terpyridine-6,6'-dicarboxylic acid)diiridium (Ir2) were synthesized in a straightforward manner and characterized using X-ray diffraction, NMR, UV-vis absorption, and emission spectroscopy. The complexes have similar solution structures in which the two iridium centers are equivalent. This is further confirmed by the solid state structure of Ir2. The newly reported complexes display intense luminescence in dichloromethane solutions with maxima at 538 (Ir1) and 477 nm (Ir2) at 298 K (496 and 468 nm at 77 K, respectively) and emission quantum yields reaching ~18% for Ir1. The emission quantum yield for Ir1 is among the highest values reported for dinuclear iridium complexes. It shows only a 11% decrease with respect to the emission quantum yield reported for its mononuclear analogue, while the molar extinction coefficient is roughly doubled. This suggests that such architectures are of potential interest for the development of polymetallic assemblies showing improved optical properties. DFT and time-dependent-DFT calculations were performed on the ground and excited states of the complexes to provide insights into their structural, electronic, and photophysical properties.     

Substituent Effect on the π Linkers in Triphenylamine Dyes for Sensitized Solar Cells: A DFT/TDDFT Study

A series of metal‐free organic donor–π bridge–acceptor dyes are studied computationally using density functional theory (DFT) and time‐dependent DFT (TDDFT) approaches to explore their potential performances in dye‐sensitized solar cells (DSSCs). Taking triphenylamine (TPA) and cyanoacrylic acid moieties as donor and acceptor units, respectively, the effects of different substituents of the π linkers in the TPA‐based dyes on the energy conversion efficiency of the DSSCs are theoretically evaluated through optimized geometries, charge distributions, electronic structures, simulated absorption spectra, and free energies of injection. The results show that the molecular orbital energy levels and electron‐injection driving forces of the TPA dyes can be tuned by the introduction of substituents with different electron‐withdrawing or ‐donating abilities. The electron‐withdrawing substituent always lowers the energies of both frontier orbitals, while the electron‐donating one heightens them simultaneously. The efficiency trend of these TPA derivatives as sensitizers in DSSCs is also predicted by analyzing the light‐harvesting efficiencies and the free energies of injection. The following substituents are shown to increase the efficiency of the dye: OMe, OEt, OHe, and OH.     

Phosphorescent platinum(II) complexes derived from multifunctional chromophores: synthesis, structures, photophysics, and electroluminescence

The synthesis and structural, photophysical, electrochemical, and electroluminescent properties of a novel class of trifunctional Pt(II) cyclometalated complexes are reported in which the hole-transporting triarylamine, electron-transporting oxadiazole, and electroluminescent metal components are integrated into a single molecule. These neutral metal chelates display good thermal stability (>250 degrees C under N2) and morphological stability. All of them exhibit intense ligand-centered fluorescence and phosphorescence in fluid solutions at room temperature, but the emission spectra become largely dominated by triplet emission bands in CH2Cl2 glass at 77 K. Substituents with different electronic properties were introduced into the bipolar cyclometalating ligands to fine-tune the absorption and emissive characteristics of the compounds, and the results were correlated with theoretical calculations using density functional theory. A comparison of the photophysics and electrochemistry of our multifunctional systems to those only derived from each of the constituent components was also made and discussed. These Pt complexes can be vacuum-sublimed and applied as emissive dopants for the fabrication of vapor-deposited electrophosphorescent organic light-emitting devices (OLEDs), which generally exhibit good device performance with efficiencies up to 3.6%, 11.0 cd A-1, and 5.8 lm W-1. While the electroluminescence energy resembles that recorded in fluid solutions for these Pt emitters, these monochromatic OLEDs can emit tunable colors by varying the aryl ring substituents and the level of doping. Saliently, single dopant white-light electroluminescence, triggered by the simultaneous fluorescence/phosphorescence emission of the metal complexes and a variation of applied driving voltages, has also been realized based on some of these multifunctional complexes with peak electrophosphorescence efficiencies of 6.8 cd A-1 and 2.6%.