Structures, photoluminescence, and reversible vapoluminescence properties of neutral platinum(II) complexes containing extended pi-conjugated cyclometalated ligands

Reacting K2PtCl4 with the tridentate R-C(wedge)N(wedge)C-H2 ligands 2,6-di-(2'-naphthyl)-4-R-pyridine (R = H, 1a; Ph, 1b; 4-BrC6H4, 1c; 3,5-F2C6H3, 1d) in glacial acetic acid, followed by heating in dimethyl sulfoxide (DMSO), gave complexes [(R-C(wedge)N(wedge)C)Pt(DMSO)] (2a-d). In the crystal structures of 2a-c, the molecules are paired in a head-to-tail orientation with Pt...Pt separations >6.3 A, and there are extensive close C-H...pi (d = 2.656-2.891 A), pi...pi (d = 3.322-3.399 A), and C-H...O=S (d = 2.265-2.643 A) contacts. [(Ph-C(wedge)N(wedge)C)Pt(PPh3)] (3) was prepared by reacting 2b with PPh3. Reactions of 2a-d with bis(diphenylphosphino)methane (dppm) gave [(R-C(wedge)N(wedge)C)2Pt2(mu-dppm)] (4a-d). Both head-to-head (syn) and head-to-tail (anti) conformations were found for 4a.6CHCl3.C5H12, whereas only one conformation was observed for 4b.2CHCl3 (syn), 4c.3CH2Cl2 (syn), and 4d.2CHCl3 (anti). In the crystal structures of 4a-d, there are close intramolecular Pt...Pt contacts of 3.272-3.441 A in the syn conformers, and long intramolecular Pt...Pt separations of 5.681-5.714 A in the anti conformers. There are weak C-H...X (d = 2.497-3.134 A) and X...X (X = Cl or Br; d = 2.973-3.655 A) interactions between molecules 4a-d and occluded CHCl3/CH2Cl2 molecules, and their solvent channels are of varying diameters (approximately 9-28 A). Complexes 2a-d, 3, and 4a-d are photoluminescent in the solid state, with emission maxima at 602-643 nm. Upon exposure to volatile organic compounds, 4a shows a fast and reversible vapoluminescent response, which is most intense with volatile halogenated solvents (except CCl4). Powder X-ray diffraction analysis of desolvated 4a revealed a more condensed molecular packing of syn and anti complexes than crystal 4a.6CHCl3.C5H12.     

Peri- and enantioselectivity of thermal, scandium-, and [pybox/scandium]-catalyzed Diels-Alder and hetero-Diels-Alder reactions of methyl (E)-2-oxo-4-aryl-butenoates with cyclopentadiene

The cycloaddition between methyl (E)-2-oxo-4-aryl-3-butenoates (2 a-d) and cyclopentadiene, in addition to the expected normal Diels-Alder (DA) adducts endo-3 a-d and exo-4 a-d, gives the less expected endo-5 a-d products of the [4+2] hetero-Diels-Alder (HDA) reaction in which the alpha-ketoester behaves as a heterodiene. If a comparison is made between the thermal and the scandium(III) triflate-catalyzed conditions, the periselectivity changes and whereas under thermal conditions the main products are those from the DA reaction (3 a-d), in the presence of Sc(OTf)3 (OTf=triflate), the HDA products 5 a-d become largely predominant. The reactions are enantioselectively catalyzed by the scandium(III) triflate complex of (4'S,5'S)-2,6-bis[4'-(triisopropylsilyl)oxymethyl-5'-phenyl-1',3'-oxazolin-2'-yl]pyridine (1) and both the DA and the HDA products are obtained with excellent enantiomeric excess, up to >99% ee. The X-ray crystallographic structure determination of 5 c assigns it the 4R,4aS,7aR absolute configuration. The thermal retro-Claisen rearrangement of 3 c into (4R,4aS,7aR)-5 c allows the correlation of their absolute configuration, and 3 c has therefore the 2R,3R configuration. By analogy the same absolute configuration can be assigned to 3 a,b,d and 5 a,b,d, and the stereospecific thermal Claisen rearrangement of the optically active 5 a,b,d into 3 a,b,d completes the correlation between their absolute configuration. The [3,3]-sigmatropic rearrangements can be easily carried out under catalytic conditions with scandium(III) triflate, which promotes the equilibration between 3 a-d and 5 a-d, with a different degree of enantioselectivity characterizing the process starting from 3 a-d or 5 a-d. The unambiguous attributions of the configuration to the products allows us to propose a rationale of the stereochemical outcome of the catalyzed cycloaddition and to investigate the reaction mechanism of the competing DA and HDA reactions and shifts in products distribution by acid catalysis.     

Copolymerization of silyl vinyl ethers with olefins by (alpha-diimine)PdR+

This paper reports that (alpha-diimine)PdMe+ catalyzes the copolymerization of olefins and silyl vinyl ethers. The reactions of (alpha-diimine)PdMe+ (alpha-diimine = (2,6-iPr2-C6H3)N=CMe-CMe=N(2,6-iPr2-C6H3)) with excess vinyl ethers CH2=CHOR (1a-d: R = tBu (a), SiMe3 (b), SiPh3 (c), Ph (d)) in CH2Cl2 at 20 degrees C afford polymers for 1a (rapidly) and 1b (slowly) but not for 1c or 1d. The structures of poly(1a,b) indicate a cationic polymerization mechanism. The reaction of (alpha-diimine)PdMe+ with 1-2 equiv of 1a-d proceeds by sequential C=C pi-complexation to form (alpha-diimine)PdMe(CH2=CHOR)+ (2a-d), 1,2 insertion to form (alpha-diimine)Pd(CH2CHMeOR)+ (3a-d), reversible isomerization to (alpha-diimine)Pd(CMe2OR)+ (4a-d), beta-OR elimination to generate (alpha-diimine)Pd(OR)(CH2=CHMe)+ (not observed), and allylic C-H activation to yield (alpha-diimine)Pd(eta3-C3H5)+ (5) and ROH. The reaction of (alpha-diimine)PdMe+ with 1-hexene/1b and 1-hexene/1c mixtures in CH2Cl2 at 20 degrees C affords copolymers containing up to 20 mol % silyl vinyl ether. The copolymers were purified to be free of any -[CH2CHOSiR3]n- homopolymer. The copolymer structures are similar to that of homopoly(1-hexene) generated under the same conditions. The major comonomer units are CH3CH(OSiR3)CH2-, CH2(OSiR3)CH2- and -CH2CH(OSiR3)CH2-. The 1-hexene/CH2=CHOSiR3 copolymers can be desilylated to give 1-hexene/CH2=CHOH copolymers. The results of control experiments argue against cationic and radical mechanisms for the copolymerization, and an insertion/chain-walking mechanism is proposed.     

Synthesis of novel 4(5)-(5-aminotetrahydropyran-2-yl)imidazole derivatives and their in vivo release of neuronal histamine measured by brain microdialysis

The (2R,5S)-trans- and (2S,5S)-cis-stereoisomers 1a and 1b of 4(5)-(5-aminotetrahydropyran-2-yl)imidazole, which have two chiral centers and adopt a stable chair conformation, were synthesized via cyclization of diol intermediates 7 using L-glutamine as the starting material. Their enantiomers, (2S,5R)-trans-1c and (2R,5R)-cis-1d, were synthesized by the same methodology from D-glutamine. Stereo isomers 1a-d were converted into cyanoguanidines 11a-d, and into N-isopropyl and N-3,3-dimethylbutyl derivatives 12a-d and 13a-d, respectively. The results of in vivo brain microdialysis of the derivatives apparently indicated that only (2S,5R)-isomers increased the release of neuronal histamine. Among the many (2S,5R)-N-alkyl derivatives, 13c (OUP-133) and 18 (OUP-153) increased histamine release to 180-190% and 180-200% of basal levels, respectively, and were found to be novel histamine H(3) antagonists.     

Re(2)(CO)(10)-promoted S-binding, C-S bond cleavage, and hydrogenation of benzothiophenes: organometallic models for the hydrodesulfurization of thiophenes

In hydrodesulfurization model reactions of dinuclear metal complexes with thiophenes, we observe that ultraviolet photolysis of Re(2)(CO)(10) and benzothiophenes (BT) in hexanes solution produces the ring-opened BT complexes Re(2)(CO)(7)(mu-BT) (1a-d) (BT = benzothiophene (BT) 1a, 2-methylbenzothiophene (2-MeBT) 1b, 3-methylbenzothiophene (3-MeBT) 1c, and 3,5-dimethylbenzothiophene (3,5-Me(2)BT) 1d). The eta(1)(S)-bound BT complexes Re(2)(CO)(9)(eta(1)(S)-BT) (2a-d), prepared from Re(2)(CO)(9)(THF) and BT, are readily converted into 1a-d in good yields (40-60%) during UV photolysis in hexanes solution, which suggests that the eta(1)(S)-bound complexes 2a-d are precursors to 1a-d in the reactions of Re(2)(CO)(10) with BT. Irradiation of Re(2)(CO)(10) and 3,5-Me(2)BT with UV light in decane solution under an atmosphere of H(2) produces complex 1d and the partially hydrogenated BT complex Re(2)(CO)(7)(mu-3,5-Me(2)BT-H)(eta-H) (3d). Reactions of 1a with phosphines yield further ring-opened BT-Re complexes of the types Re(2)(CO)(7)(PMe(3))(3)(mu-BT) (4) and Re(2)(CO)(7)(PR(3))(2)(mu-BT) (R = Me (5), (i)Pr (6), Cy (7), and bis(diethylphosphino)ethane (8)). Structures of 1d, 2c, 3d, and 6, which demonstrate various bonding modes of benzothiophene and its C-S cleaved derivatives to two metal centers, were determined by X-ray crystallographic studies.     

Electron-transfer-catalyzed rearrangement of unsymmetrically substituted diiron dithiolate complexes related to the active site of the [FeFe]-hydrogenases

Novel asymmetrically substituted azadithiolate compounds [Fe2(CO)4(kappa2-dppe){micro-SCH2N(R)CH2S}] (R=iPr, 1a; CH2CH2OCH3, 1b; CH2C6H5, 1c) have been synthesized by treatment of [Fe2(CO)6(micro-adt)] [adt=SCH2N(R)CH2S, with R=iPr, CH2CH2OCH3, CH2C6H5] with dppe (dppe=Ph2PCH2CH2PPh2) in refluxing toluene in the presence of Me3NO. 1a-c have been characterized by single-crystal X-ray diffraction analyses. The electrochemical investigation of 1a-c and of [Fe2(CO)4(kappa2-dppe)(micro-pdt)] (1d) [pdt=S(CH2)3S] in MeCN- and THF-[NBu4][PF6] has demonstrated that the electrochemical reduction of 1a-d gives rise to an Electron-transfer-catalyzed (ETC) isomerization to the symmetrical isomers 2a-d where the dppe ligand bridges the iron centers. Compounds 2a-d were characterized by IR and NMR spectroscopy, elemental analysis, and X-ray crystallography for 2a.     

Solid phase synthesis and application of trisubstituted thioureas

Resin-bound amines 1a-e condense with isothiocyanates to give thiourea resins 2a-i. Resins 2a-g subsequently react with iodomethane followed by cleavage affording S-methyl isothioureas 4a-g, and resins 2a-b,h-i react with acyl chlorides to afford N-acylated thioureas 6a-d. N-Acylthioureas 8a-f (R(2) = H) were prepared directly from resin-bound amines 1a-d with acyl isothiocyanates. N-Acylthioureas 8a-d,f(R(2) = H) were used for the preparation of S-methyl-N-acylisothioureas 10a-e. Alkylation was performed using methyl iodide. Resin-bound S-methyl-N-acylisothioureas 10a,b,d are converted by an action of hydrazines into 3-amino-1,2,4-triazoles 13a-d. Condensation of resins 8a-e (R(2) = H) with 2-bromoacetophenones in the presence of TEA affords thiazoles 15 a-e. All transformations proceeded in high yields and gave products of good purities.     

Synthesis and structural characterization of configurational isomers of tungsten-palladium complexes with bridging diphenyl(dithioalkoxycarbonyl)phosphine as a ligand and phosphine transfer from tungsten to palladium

Treatment of the complex [W(CO)5[PPh2(CS2Me)]] (2) with [Pd(PPh3)4] (1) affords binuclear complexes such as anti-[(Ph3P)2Pd[mu-eta 1,eta 2-(CS2Me)PPh2]W(CO)5] (3), syn-[(Ph3P)2Pd[mu-eta 1,eta 2-(CS2Me)PPh2]W(CO)5] (4), and trans-[W(CO)4(PPh3)2] (5). In 3 and 4, respectively, the W and Pd atoms are in anti and syn configurations with respect to the P-CS2 bond of the diphenyl(dithiomethoxycarbonyl)phosphine ligand, PPh2(CS2Me). Complex 3 undergoes extensive rearrangement in CHCl3 at room temperature by transfer of a PPh3 ligand from Pd to W, eliminating [W(CO)5(PPh3)] (7), while the PPh2CS2Me ligand transfers from W to Pd to give [[(Ph3P)Pd[mu-eta 1,eta 2-(CS2Me)PPh2]]2] (6). In complex 6, the [Pd(PPh3)] fragments are held together by two bridging PPh2(CS2Me) ligands. Each PPh2(CS2Me) ligand is pi-bonded to one Pd atom through the C=S linkage and sigma-bonded to the other Pd through the phosphorus atom, resulting in a six-membered ring. Treatment of Pd(PPh3)4 with [W(CO)5[PPh2[CS2(CH2)nCN]]] (n = 1, 8a; n = 2, 8b) in CH2Cl2 affords syn-[(Ph3P)2Pd[mu-eta 1,eta 2-[CS2(CH2)nCN]PPh2]W(CO)5] (n = 1, 9a; n = 2, 9b). Similar configurational products syn-[(Ph3P)2Pd[mu-eta 1,eta 2-(CS2R)PPh2]W(CO)5] (R = C2H5, C3H5, C2H4OH, C3H6CN, 11a-d) are synthesized by the reaction of Pd(PPh3)4 with [W(CO)5[PPh2(CS2R)]] (R = C2H5, C3H5, C2H4OH, C3H6CN, 10a-d). Although complexes 11a-d have the same configuration as 9a,b, the SR group is oriented away from Pd in the former and near Pd in the latter. In these complexes, the diphenyl(dithioalkoxycarbonyl)phosphine ligand is bound to the two metals through the C=S pi-bonding and to phosphorus through the sigma-bonding. All of the complexes are identified by spectroscopic methods, and the structures of complexes 3, 6, 9a, and 11d are determined by single-crystal X-ray diffraction. Complexes 3, 9, and 11d crystallize in the triclinic space group P1 with Z = 2, whereas 6 belongs to the monoclinic space group P2/c with Z = 4. The cell dimensions are as follows: for 3, a = 10.920(3) A, b = 14.707(5) A, c = 16.654(5) A, alpha = 99.98(3) degrees, beta = 93.75(3) degrees, gamma = 99.44(3) degrees; for 6, a = 15.106(3) A, b = 9.848(3) A, c = 20.528(4) A, beta = 104.85(2) degrees; for 9a, a = 11.125(3) A, b = 14.089(4) A, c = 17.947(7) A, alpha = 80.13(3) degrees, beta = 80.39(3) degrees, gamma = 89.76(2) degrees; for 11d, a = 11.692(3) A, b = 13.602(9) A, c = 18.471(10) A, alpha = 81.29(5) degrees, beta = 80.88(3) degrees, gamma = 88.82(1) degrees.     

Furopyridines. XXVIII. Reactions of 3-bromo derivatives of furo[2,3-b]-, -[3,2-b]-, -[2,3-c]- and -[3,2-c]pyridine and their N-oxides

Bromination of 3-bromofuro[2,3-b]- 1a , -[3,2-b]- 1b and - [3,2-c]pyridine 1d afforded the 2,3-dibromo derivatives 2a, 2b and 2d , while the -[2,3-c]- compound 1c did not give the dibromo derivative. Nitration of 1a-d gave the 2-nitro-3-bromo compounds 3a-d . The N-oxides 4a-d of 1a-d were submitted to the cyanation with trimethylsilyl cyanide to yield the corresponding α-cyanopyridine compound 6a-d . Chlorination of 4a and 4d with phosphorus oxychloride gave mainly the chloropyridine derivatives 7a, 7′a and 7d , while 4b and 4c gave mainly the chlorofuran derivatives 7′b and 7′c accompanying formation of the chloropyridine derivatives 7b, 7′b and 7c . Acetoxylation of 4a and 4b with acetic anhydride yielded the acetoxypyridine compounds 8a, 8′a and 8b , while 4c and 4d gave the acetoxypyridine 8′c, 8′d and 8′d , pyridone 8c and 8d , acetoxyfuran 8′c and dibromo compound 9c and 9′c.     

Diphosphanes derived from phobane and phosphatrioxa-adamantane: similarities, differences and anomalies

The homodiphosphanes CgP-PCg (1) and PhobP-PPhob (2) and the heterodiphosphanes CgP-PPhob (3), CgP-PPh(2) (4a), CgP-P(o-Tol)(2) (4b), CgP-PCy(2) (4c), CgP-P(t)Bu(2) (4d), PhobP-PPh(2) (5a), PhobP-P(o-Tol)(2) (5b), PhobP-PCy(2) (5c), PhobP-P(t)Bu(2) (5d) where CgP = 6-phospha-2,4,8-trioxa-1,3,5,7-tetramethyladamant-9-yl and PhobP = 9-phosphabicyclo[3.3.1]nonan-9-yl have been prepared from CgP(BH(3))Li or PhobP(BH(3))Li and the appropriate halophosphine. The formation of 1 is remarkably diastereoselective, with the major isomer (97% of the product) assigned to rac-1. Restricted rotation about the P-P bond of the bulky meso-1 is detected by variable temperature (31)P NMR spectroscopy. Diphosphane 3 reacts with BH(3) to give a mixture of CgP(BH(3))-PPhob and CgP-PPhob(BH(3)) which was unexpected in view of the predicted much greater electron-richness of the PhobP site. Each of the diphosphanes was treated with dimethylacetylene dicarboxylate (DMAD) in order to determine their propensity for diphosphination. The homodiphosphanes 1 and 2 did not react with DMAD. The CgP-containing heterodiphosphanes 4a-d all added to DMAD to generate the corresponding cis alkenes CgPCH(CO(2)Me)=CH(CO(2)Me)PR(2) (6a-d) which have been used in situ to form chelate complexes of the type [MCl(2)(diphos)] (7a-d) where M = Pd or Pt. The PhobP-containing heterodiphosphanes 3 and 5a-d react anomalously with DMAD and do not give the products of diphosphination. The X-ray crystal structures of the diphosphanes 2, 3, 4a, and 5a, the monoxide and dioxide of diphosphane 1, and the platinum chelate complex 7c have been determined and their structures are discussed.     

Synthesis and characterisation of luminescent rhenium tricarbonyl complexes with axially coordinated 1,2,3-triazole ligands

A series of 1-alkyl-4-aryl-1,2,3-triazoles (1-methyl-4-phenyl-1,2,3-triazole (1a); 1-propyl-4-phenyl-1,2,3-triazole (1b); 1-benzyl-4-phenyl-1,2,3-triazole (1c); 1-propyl-4-p-tolyl-1,2,3-triazole (1d)) have been prepared through a one-pot procedure involving in situ generation of the alkyl azide from a halide precursor followed by copper catalysed alkyne/azide cycloaddition (CuAAC) with the appropriate aryl alkyne. Cationic Re(I) complexes [Re(bpy)(CO)(3)(1a-d)]PF(6) (2a-d) were then prepared by stirring [Re(bpy)(CO)(3)Cl] with AgPF(6) in dichloromethane in the presence of ligands 1a-d. X-ray crystal structures were obtained for 2a and 2b. In the solid state, 2a adopts a highly distorted geometry, which is not seen for 2b, in which the plane of the triazole ligand tilts by 13° with respect to the Re-N bond as a result of a π-stacking interaction between the Ph substituent and one of the rings of the bpy ligand. This π-stacking interaction also results in severe twisting of the bpy ligand. Infrared spectra of 2a-d exhibit ν(CO) bands at ～2035 and ～1926 cm(-1) suggesting that these ligands are marginally better donors than pyridine (ν(CO) = 2037, 1932 cm(-1)). The complexes are luminescent in aerated dichloromethane at room temperature with emission maxima at 542 to 552 nm comparable to that of the pyridine analogue (549 nm) and blue shifted relative to the parent chloride complex. Long luminescent lifetimes are observed for the triazole complexes (475 to 513 ns) in aerated dichloromethane solutions at room temperature.     

1H NMR direct observation of enantiomeric exchange in palladium(II) and platinum(II) complexes containing N,N' bidentate aryl-pyridin-2-ylmethyl-amine ligands

The complexes [MCl(2)(kappa2-N approximately N')] (N approximately N' = 2-C(5)H(4)N-CH2-NHAr; Ar = 4-MeC(6)H(4), a; 2,6-Me(2)C(6)H(3), b; 4-MeOC(6)H(4), c; 4-CF(3)C(6)H(4), d; M = Pd, 1a-d; Pt, 2a-d) have been prepared and fully stereochemically characterized both in the solid state and in solution. Their behavior in DMSO-d6 solution is dependent on the substituents of the aryl group and on the metal. Complexes of palladium with substituents at the para position (1a, 1c, 1d) display a dynamic 1H NMR pattern when the solutions are heated. An enantiomeric exchange Slambda/Rdelta is suggested to explain such behavior. On the basis of the calculated negative DeltaS values, an associative mechanism involving the solvent is proposed. Under the same conditions, analogous complexes of platinum (2a, 2c, 2d) proved to be unstable, and release of the N approximately N' ligand was observed. Complexes 1b and 2b show temperature-variable 1H NMR spectra without any evidence accounting for enantiomeric exchange or decoordination. DFT calculations on models of 1a and 1b show that diastereomeric exchange Sdelta/Slambda is a process where the complex with the higher sterical hindrance, 1b, has a lower energy barrier.     

Highly selective addition of chiral,sulfonimidoyl substituted bis(allyl)titanium complexes to N-sulfonyl alpha-imino esters: asymmetric synthesis of gamma,delta-unsaturated alpha-amino acids bearing a chiral,electron-withdrawing nucleofuge at the delta-position

Selective addition of the chiral, sulfonimidoyl substituted bis(allyl)titanium complexes 5a-d, which are configurationally labile in regard to the Calpha-atoms, to N-toluenesulfonyl (Ts)-, N-2-trimethylsilylethanesulfonyl (SES)-, and N-tert-butylsulfonyl (Bus) alpha-imino ester (9a-c) in the presence of Ti(OiPr)(4) and ClTi(OiPr)(3) afforded with high regio- and diastereoselectivities in good yields the (syn, E)-configured beta-alkyl-gamma,delta-unsaturated alpha-amino acid derivatives 2a-g, which carry a chiral, electron-withdrawing nucleofuge at the delta-position and a cyclohexyl, an isopropyl, a phenyl, and a methyl group at the beta-position. Addition of the cyclic bis(allyl)titanium complex 14 to N-Bus alpha-imino ester 9c afforded with similar high regio- and diastereoselectivities the (E)- and (Z)-configured amino acid derivatives (E)-8 and (Z)-8. Reaction of complexes 5a-d with alpha-imino esters 9a-c in the presence of Ti(OiPr)(4) occurs stepwise to give first the mono(allyl)titanium complexes containing 2a-g as ligands, which react in the presence of ClTi(OiPr)(3) with a second molecule of 9a-c with formation of two molecules of 2a-g. Formation of (S,R,E)-configured homoallylic amines 2a-g entails Si,Re,E processes of alpha-imino esters 9a-c with the (R,R)-configured bis(allyl)titanium complexes (R,R)-5a-d and (R)-configured mono(allyl)titanium complexes (R)-17a-d, both of which are most likely in rapid equilibrium with their (S,S)-diastereomers and (S)-diastereomers, respectively. Interestingly, in the reaction of 5a-d with aldehydes, the (S,S)-configured complexes (S,S)-5a-d are the ones which react faster. Reaction of the N-titanated amino acid derivatives Ti-2a and Ti-2b with N-Ts alpha-imino ester 9a led to the highly diastereoselective formation of imidazolidinones 15a and 15b, respectively. Cleavage of the sulfonamide group of the N-Bus amino acid derivative 2d with CF(3)SO(3)H gave quantitatively the sulfonimidoyl functionalized amino acid H-2d. A Ni-catalyzed cross-coupling reaction of the amino acid derivative 2e with ZnPh(2) led to a substitution of the sulfonimidoyl group by a phenyl group and furnished the enantiomerically pure protected alpha-amino acid Bus-1. Two new N-sulfonyl alpha-imino esters, the SES and the Bus alpha-imino esters 9b and 9c, respectively, have been synthesized from the corresponding sulfonamides by the Kresze method in medium to good yields. The N-SES alpha-imino ester 9b and the N-Bus alpha-imino ester 9c should find many synthetic applications, in particular, in cases where the N-Ts alpha-imino ester 9a had been used before.     

Syntheses and 1H-, 13C- and 15N-NMR spectra of ethynyl isocyanide, H-C triple bond C-N triple bond C, D-C triple bond C-N triple bond C and prop-1-ynyl isocyanide, H3C-C triple bond C-N triple bond C, D3C-C triple bond C-N triple bond C: high resolution infrared specturm of prop-1-ynyl isocyanide

Ethynyl isocyanide, H-C triple bond C-N triple bond C (1a), deuteroethynyl isocyanide, D-C triple bond C-N triple bond C (1b), prop-1-ynyl isocyanide, H3C-C triple bond C-N triple bond C (1c), and trideuteroprop-1-ynyl isocyanide, D3C-C triple bond C-N triple bond C (1d) are synthesized by flash vacuum pyrolysis of suitable organometallic precursor molecules (CO)5Cr(CN-CCl triple bond CClH) (5a), (CO)5Cr(CN-CCI=CClD) (5b), (CO)5Cr(CN-CCl=CCl-CH3) (5c) and (CO)5Cr(CN-CCI=CCl-CD3) (5d), respectively. Compounds 5a-d are formed in two steps by radical alkylation of tetraethyl-ammonium pentacarbonyl(cyano)chromate, NEt4[Cr(CO)5(CN)] (2) by 1,1,2,2,-tetrachloroethane (3a), 1,1,2,2-tetrachloro-1,2-dideuteroethane (3b), 1,1,2,2,-tetrachloropropane (3c), and 1,1,2,2-tetrachloro- 1,3,3,3-tetradeutero-propane (3d) yielding [(CO)5Cr(CN-CCl2-CCl2-H)] (4a), [(CO)5Cr(CN-CCl2-CCl2D)] (4b), [(CO)5Cr(CN-CCl2-CCl2-CH3)] (4c), and [(CO)5Cr(CN-CCl2-CCl2-CD3)] (4d). Dehalogenation of 4a-d using zinc in diethylether/acetic acid gives 5a-d, respectively. A multinuclear NMR study revealed the 1H-, 13C- and 15N-NMR data of 1a and 1c. Molecular spectroscopic data of 1c were determined by high resolution infrared spectroscopy. The by-products of the pyrolysis are the E and Z isomers of the halogenated ethenyl isocyanides H(Cl)C=CCl-NC (6a) and H3C(Cl)C=CCl-NC (6c) which have been characterized by IR, MS and NMR spectroscopy.     

Synthesis of optically active 2-alkoxy-2H-pyran-3(6H)-ones. Their use as dienophiles in Diels-Alder cycloadditions.

Optically active 2-alkoxy-2H-pyran-3(6H)-ones (4a-d) were synthesized in one step by the tin(IV) chloride-promoted glycosylation and rearrangement of the 2-acetoxy-3,4-di-O-acetyl-D-xylal (3) prepared from D-xylose (1). The absolute configuration of the new stereocenter at C-2 was determined by chemical transformation of the dihydropyranones 4a and 4b into the known alkyl pentopyranosides (7a and 7b, respectively). Also, from (1)H NMR experiments using a chiral ytterbium shift reagent, the enantiomeric excesses for 4a (>86%) and 4b (>77%) were established. Enantiomerically pure 4c and 4d were obtained by reaction of 3 with chiral 2-octanol (R and S, respectively). Dihydropyranones 4a-d were employed as dienophiles in Diels-Alder cycloadditions with 2,3-dimethylbutadiene and butadiene. Under thermal conditions, only moderate yields (approximately 50%) of cycloadducts 9a-c and 10a were respectively obtained with good diastereofacial selectivity (>80%). Optimized Lewis acid promoted cycloadditions led to 9a-d and 10a,c in higher yields (approximately 80%) and with higher diastereoselectivities (>94%). The major products were formed by approach of the dienes from the less hindered face of the dihydropyranones, and the minor products (such as 11a) were formed by addition from the opposite side. Furthermore, cycloadduct 9a was stable in an alkaline solution, whereas 11a underwent epimerization under the same conditions.     

Controlling both ground- and excited-state thermal barriers to Bergman cyclization with alkyne termini substitution

The cross-coupling reaction of 2,3-dibromo-5,10,15,20-tetraphenylporphyrin with corresponding organostannanes in the presence of a Pd0 catalyst in THF at reflux temperature yields free base 2,3-dialkynylporphyrins 1a,c-e. The subsequent deprotection of trimethylsilyl group of 1a with TBAF in THF under aqueous conditions produces the 2,3-diethynyl-5,10,15,20-tetraphenylporphyrins 1b in 87% yield. Compounds 1a-d undergo zinc insertion upon treatment with Zn(OAc)2.2H2O in CHCl3/MeOH to give zinc(II) 2,3-dialkynyl-5,10,15,20-tetraphenylporphyrins (2a-d) in 70-92% yields. Thermal Bergman cyclization of 1a-e and 2a-d was studied in chlorobenzene and approximately 35-fold 1,4-cyclohexadiene at 120-210 degrees C. Compounds 1b and 2b with R = H react at lower temperature (120 degrees C) and produce cyclized products 3b and 4b in higher yields (65-70%) than their propyl, isopropyl, and phenyl analogues, with R = Ph being the most stable. Continuing in this trend, the -TMS derivatives 1a and 2a exhibit no reactivity even after heating at 190 degrees C in chlorobenzene/CHD for 24 h. Photolysis (at lambda >/= 395 nm) of 1b and 2b at 10 degrees C leads the formation of isolable picenoporphyrin products in 15 and 35% yields, respectively, in 72 h, whereas these compounds are stable in solution under same reaction conditions at 25 degrees C in the dark. Unlike thermolysis at 125 degrees C, which did not yield Bergman cyclized product for R = Ph, photolysis generated very small amounts of picenoporphyrin products (3c: 5%; 4c: 8% based on 1H NMR) as well as a mixture of reduced porphyrin products that were not separable. Thus, trends in the barrier to Bergman cyclization in the excited state exhibit the same trend as those observed in the ground state as a function of R-group. Finally, photolysis of 2b at 10 degrees C with lambda >/= 515 or 590 nm in benzene/iPrOH (4:1, 72 h) produces 4b in 15 and 6% isolated yields, indicating that conjugation of the enediyne unit into the porphyrin electronic transitions leads to sufficient distortion to generate photoproduct even with long wavelength excitation.     

Fluorescence spectroscopic properties and crystal structure of a series of donor-acceptor diphenylpolyenes

A series of p-nitro-p'-alkoxy(OR)-substituted (E,E,E)-1,6-diphenyl-1,3,5-hexatrienes (1a, R = Me; 1b, R = Et; 1c, R = n-Pr; 1d, R = n-Bu) were prepared. The absorption and fluorescence spectra in solution were almost independent of the alkoxy chain length. The absorption maximum showed only a small dependence on the solvent polarity, whereas the fluorescence maximum red-shifted largely as the polarity increased. The solid-state absorption and fluorescence spectra were red-shifted relative to those in low polar solvents and were clearly dependent on the alkoxy chain length. The fluorescence maxima for the crystals of 1b and 1d were observed at 635-650 nm, which were red-shifted by 40-50 nm relative to those for 1a and 1c. The Stokes shifts were all relatively small (3000-3500 cm-1). For all four compounds, the fluorescence decay curves in the solid state were able to be analyzed by single-exponential fitting to give the lifetimes of 1.1-1.3 ns. This indicates that the emission of 1a-d is not originated from an excimer or molecular aggregates, but from only one emitting monomeric species. The fluorescence quantum yields of 1a-d were considerably high compared with the values for organic solids, which is consistent with their monomeric origin of emission. Single-crystal X-ray structure analyses of 1a, 1c, and 1d showed that the crystal packing was dependent on the alkoxy chain length. The crystals of 1a and 1c had herringbone structure, whereas that of 1d had pi-stacked structure. Strong pi-pi interaction in the crystal of 1d would be the cause of the spectral red shifts relative to those for 1a and 1c. No observation of excimer fluorescence from crystal 1d can be attributed to the limited overlap between the pi-planes of the molecules due to its "slipped-parallel" structure.     

Spectral, structural, and electrochemical properties of ruthenium porphyrin diaryl and aryl(alkoxycarbonyl) carbene complexes: influence of carbene substituents, porphyrin substituents, and trans-axial ligands

A wide variety of ruthenium porphyrin carbene complexes, including [Ru(tpfpp)(CR(1)R(2))] (CR(1)R(2) = C(p-C(6)H(4)Cl)(2) 1 b, C(p-C(6)H(4)Me)(2) 1 c, C(p-C(6)H(4)OMe)(2) 1 d, C(CO(2)Me)(2) 1 e, C(p-C(6)H(4)NO(2))CO(2)Me 1 f, C(p-C(6)H(4)OMe)CO(2)Me 1 g, C(CH==CHPh)CO(2)CH(2)(CH==CH)(2)CH(3) 1 h), [Ru(por)(CPh(2))] (por=tdcpp 2 a, 4-Br-tpp 2 b, 4-Cl-tpp 2 c, 4-F-tpp 2 d, tpp 2 e, ttp 2 f, 4-MeO-tpp 2 g, tmp 2 h, 3,4,5-MeO-tpp 2 i), [Ru(por)[C(Ph)CO(2)Et]] (por=tdcpp 2 j, tmp 2 k), [Ru(tpfpp)(CPh(2))(L)] (L = MeOH 3 a, EtSH 3 b, Et(2)S 3 c, MeIm 3 d, OPPh(3) 3 e, py 3 f), and [Ru(tpfpp)[C(Ph)CO(2)R](MeOH)] (R = CH(2)CH==CH(2) 4 a, Me 4 b, Et 4 c), were prepared from the reactions of [Ru(por)(CO)] with diazo compounds N(2)CR(1)R(2) in dichloromethane and, for 3 and 4, by further treatment with reagents L. A similar reaction of [Os(tpfpp)(CO)] with N(2)CPh(2) in dichloromethane followed by treatment with MeIm gave [Os(tpfpp)(CPh(2))(MeIm)] (3 d-Os). All these complexes were characterized by (1)H NMR, (13)C NMR, and UV/Vis spectroscopy, mass spectrometry, and elemental analyses. X-ray crystal structure determinations of 1 d, 2 a,i, 3 a, b, d, e, 4 a-c, and 3 d-Os revealed Ru==C distances of 1.806(3)-1.876(3) A and an Os==C distance of 1.902(3) A. The structure of 1 d in the solid state features a unique "bridging" carbene ligand, which results in the formation of a one-dimensional coordination polymer. Cyclic voltammograms of 1 a-c, g, 2 a-d, g-k, 3 b-d, 4 a, b, and 3 d-Os show a reversible oxidation couple with E(1/2) values in the range of 0.06-0.65 V (vs Cp(2)Fe(+/0)) that is attributable to a metal-centered oxidation. The influence of carbene substituents, porphyrin substituents, and trans-ligands on the Ru==C bond was examined through comparison of the chemical shifts of the pyrrolic protons in the porphyrin macrocycles ((1)H NMR) and the M==C carbon atoms ((13)C NMR), the potentials of the metal-centered oxidation couples, and the Ru==C distances among the various ruthenium porphyrin carbene complexes. A direct comparison among iron, ruthenium, and osmium porphyrin carbene complexes is made.     

From large 12-membered macrometallacycles to ionic (NHC)2M+Cl- type complexes of gold and silver by modulation of the N-substituent of amido-functionalized N-heterocyclic carbene (NHC) ligands

A series of structurally diverse gold and silver complexes extending from ionic (NHC) 2M(+)Cl(-) (M=Au, Ag) type complexes to large 12-membered macrometallacycles have been prepared by the appropriate modification of the N-substituent of amido-functionalized N-heterocyclic carbenes. Specifically, the ionic, [1-(R)-3-{ N-(t-butylacetamido)imidazol-2-ylidene}]2M(+)Cl(-), (R=t-Bu, i-Pr; M=Au, Ag; 1b, 1c, 2b, 2c) complexes, were obtained in case of the N- t-butyl substituent of the amido-functionalized sidearm while 12-membered macrometallacycles, [1-(R)-3-{N-(2,6-di i-propylphenylacetamido)imidazol-2-ylidene}]2M2, (R=t-Bu, i-Pr; M=Au, Ag; 3b, 3c, 4b, 4c) were obtained in case of the 2,6-di i-propylphenyl N-substituent. These structurally diverse complexes of gold and silver were, however, prepared employing a common synthetic pathway involving the reactions of the imidazolium chloride salts (1a, 2a, 3a, 4a) with Ag2O to give the silver complexes (1b, 2b, 3b, 4b) and which, when treated with (SMe2)AuCl, gave the gold complexes (1c, 2c, 3c, 4c). Detailed density functional theory studies of 1b, 1c, 2b, 2c, 3b, 3c, 4b, and 4c were carried out to gain insight about the structure, bonding, and the electronic properties of these complexes. The NHC-metal interaction in the ionic 1b, 1c, 2b, and 2c complexes is primarily composed of the interaction of the carbene lone pair with the empty p orbital of the metal (5p for Ag and 6p for Au) while the same in the macrometallacyclic 3b, 3c, 4b, and 4c complexes consisted of the interaction of the carbene lone pair with the empty s orbital of the metal (5s for Ag and 6s for Au). The observation of a low energy emission in about the 580-650 nm region has been tentatively assigned to originate from the presence of weak metallophilic interaction in these macrometallacyclic 3b, 3c, 4b, and 4c complexes.     

Amination of 4-nitro- and 4-cyanopyridazines by liquid ammonia/potassium permanganate

4-Nitro-3- R ¹-6- R ²-pyridazines ( 1 ) ( a, R ¹ = R ² = 2-pyridyl; b, R ¹ = H, R ² = phenyl; e, R ¹ = H, R ² = p-methoxyphenyl; d, R ¹ = R ² = H ) are aminated by liquid ammonia/potassium permanganate to the corresponding 5-amino-4-nitropyridazines 3a-d. The 4-cyano-3-R¹-6-R²-pyridazines 4a,b are only aminated in the presence of potassium amide in liquid ammonia/potassium permanganate to give the 5-amino-4-cyanopyridazines 6a,b. The 5-amino-4-nitropyridazines 3a,b,d are converted to the 4,5-diaminopyridazines 7a,b,d by reduction over a Pd/C catalyst. Reaction of 7b with glyoxal leads to 5-phenylpyrazino[2,3-d]pyridazine ( 8b ).