Feasible fabrication of o-phenanthroline-based polymer adsorbent for selective capture of aqueous Ag(I)

Devising a desirable adsorbent for efficiently selective capture of Ag(I) from wastewater has attracted much attention but faced with huge challenges. Herein, a novel linear o-phenanthroline-based polymer l-PRL was prepared via chemical oxidative polymerization for the adsorption of Ag(I). The maximum adsorption capacity for Ag(I) by l-PRL is 325.8 mg/g at pH 0. In addition, l-PRL owes ascendant selectivity for Ag(I) from aqueous solutions containing various interfering metal ions of Pb(II), Co(II), Ni(II), Cd(II) and Fe(III). Multiple characterizations of FT-IR and XPS uncover that the N groups on l-PRL act as adsorption sites to coordinate with Ag(I). Density functional theory (DFT) calculations further evidence the mechanism that l-PRL is provided with the admirable adsorptivity and selectivity for Ag(I). It is mainly attributed to the most stable complexes of l-PRL with Ag(I), which possesses shortest Ag-N bond length compared with other heavy metal ions. Furthermore, 93.5% of initial adsorption capacity is reserved after four continuous regeneration cycles, indicating that l-PRL is equipped with superior recyclability and durability, and l-PRL is capable of removing Ag(I) in low-concentration actual Ag(I)-containing wastewater completely. This study shed light on the rational design of polymer adsorbents and in-depth insight into selective removal of aqueous Ag(I).     

A selective chemosensor for detection of Ag(I) and Cu(I) based on an acenaphthoquinone derivative and its complexes

A new Schiff base, acenaphthoquinone bis(diphenylmethlenehydrazone) (L), was synthesized and employed as a chemosensor for detecting Ag(I) and Cu(I). Experimental results showed that the chemosensor exhibited high selectivity and sensitivity. The sensitivity of the chemosensor for Ag(I) or Cu(I) was not affected by other metal ions, such as Ni(II), Nd(III), Zn(II), Fe(III), Cu(II), Na(I), La(III), K(I), and Co(II). Complexes 1 and 2 were synthesized by coordination of L with Ag(I) and Cu(I), respectively. The crystal structures of 1 and 2 were determined by single-crystal X-ray diffraction. They had the same space group P2₁/c. Based on theoretical calculation, mechanism of the chemosensor detecting Ag(I) and Cu(I) was suggested.     

Solid phase extractors derived by functionalising sub-micro silica gel with chelating agents and their pH-tunable adsorbing capability towards Pb(II) and Ag(I)

Three novel solid phase extraction agents were developed by functionalising sub-micron sized silica gel with organic functional moieties possessing {SN}-ligating atoms. The extractors were characterised by FTIR and TGA. Their capability of adsorbing the ions Fe(III), Cu(II), Zn(II), Cd(II), Cr(VI), Hg(II), Pb(II), Co(II), Ni(II), and Ag(I) is described. The extractors show pH-tunable selectivity for Ag(I) and/or Pb(II). By adjusting the pH to 5 or 6, high affinity is found for both Ag(I) and Pb(II), with little or no interference by the other metal ions. At pH values of <2, the extractors become highly selective for Ag(I), with an adsorption capacity of 35 mg g^?1. Little mechanical stirring is required due to the size of the particles. The recovery rates for both Ag(I) and Pb(II) were better 90% even after five repetitive adsorption-desorption cycles.     

Selective transport of Ag(Ⅰ) ion across a bulk liquid and polymer membranes incorporated with di-N-benzylated O_3N_2 donor macrocycles

<正>The selective bulk liquid membrane and polymer membrane transports of Ag(Ⅰ) from an aqueous solution containing seven metal cations,Co(Ⅱ),Ni(Ⅱ),Cu(Ⅱ),Zn(Ⅱ),Ag(Ⅰ),Cd(Ⅱ) and Pb(Ⅱ),was studied.The source phases contained equimolar concentrations of the above-mentioned cations,with the source and receiving phases being buffered at pH 5.0 and 3.0,respectively. Ag(Ⅰ) ion transport occurred with a good efficiency from the aqueous source phases across the bulk liquid membrane and polymer membrane(derived from cellulose triacetate) containing ligand 1 as the ionophores,into the aqueous receiving phases.Clear transport selectivity for Ag(Ⅰ) was observed using ligand 1.There was no selectivity for the cations using ligand 2 in the both bulk liquid membrane and polymer membrane transports.     

Selective separation of silver(I) and mercury(II) ions in natural water samples using alumina modified thiouracil derivatives as new solid phase extractors

A simple and reliable solid-phase extraction (SPE) method has been developed to synthesise two new sorbents: 6-propyl-2-thiouracil and 5,6-diamino-2-thiouracil physically loaded onto alumina surface, phases I and II, respectively. The synthesis of these new phases has been confirmed by IR-spectroscopy. The surface concentrations of the organic moieties were determined to be 0.182 and 0.562 mmol g^?1 for phases I and II, respectively. The evaluation of the selectivity and metal uptake properties incorporated in these two alumina phases were also studied and discussed for 10 different metal ions: Ca(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Hg(II), Pb(II) and Ag(I) under different controlling factors. The data obtained clearly indicated that the new SP-extractors have the highest affinity for retention of Hg(II) ions. Selective separation of Hg(II) from Ag(I) as one of the most interfering ion, in addition to the other eight coexisting metal ions under investigation, was achieved successfully using the new sorbents at pH = 9.0 under static conditions. Therefore, Hg(II) exhibits major retention percentage (100.0%) using phase I or II. However, Ag(I) exhibits minor retention percentage equal to 1.33% using phase I and 0.67% using phase II. On the other hand, the retention percentage of the other eight metal ions ranged (0.0–3.08%) using phase I and (0.0–1.54%) using phase II at the same pH. The new phases were applied for separation and determination of trace amounts of Hg(II) and Ag(I) spiked natural water samples using cold vapour atomic absorption spectroscopy and atomic absorption spectroscopy with no matrix interference. The high recovery values of Hg(II) and Ag(I) obtained using phases I and II were ranged 98.9 ± 0.1–99.2 ± 0.05% along with a good precision (RSD% 0.01–0.502%, N = 3) demonstrate the accuracy and validity of the new sorbents for separation and determination of Hg(II) and Ag(I).     

Synthesis and characterization of silica gel microspheres encapsulated by salicyclic acid functionalized polystyrene and its adsorption of transition metal ions from aqueous solutions

The present study was undertaken to develop a novel adsorbent for heavy metal ions, and this paper presents the synthesis and characterization of a composite material-silica gel microspheres encapsulated by salicyclic acid functionalized polystyrene (SG-PS-azo-SA) with a core-shell structure. SG-PS-azo-SA was used to investigate the adsorption of Mn(II), Co(II), Ni(II), Fe(III), Hg(II), Zn(II), Cd(II), Cr(VI), Pd(II), Cu(II), Ag(I), and Au(III) from aqueous solutions. The results revealed that SG-PS-azo-SA has better adsorption capacity for Cu(II), Ag(I) and Au(III). Langmuir and Freundlich isotherm models were applied to analyze the experimental data, the best interpretation for the experimental data was given by the Langmuir isotherm equation with the maximum adsorption capacity for Cu(II), Ag(I), and Au(III) at 1.288 mmol g⁻¹, 1.850 mmol g⁻¹ and 1.613 mmol g^t-1, respectively. Thus, silica gel encapsulated by salicyclic acid functionalized polystyrene (SG-PS-azo-SA) is favorable and useful for the removal of Cu(II), Ag(I) and Au(III) metal ions.     

以硫醚为主链的螯合树脂研究Ⅰ.4-氨基安替吡啉树脂和乙基原磺酸基树脂的合成及吸附性能

聚环硫氯丙烷或环硫氯丙烷与环氧氯丙烷共聚物，在少量二乙烯三胺存在下制得交联预聚物，将交联预聚物与4－氨基安替吡啉（4AAP）或乙基原磺酸钾（PEA）反应，制得四种侧链带氨基安替吡啉，乙基原碘酸基的新型螯合树脂。它们对贵金属具有优良的吸附性能和高的吸附选择性。并通过X－射线光电子能谱初步探讨了树脂对金属离子的螯合作用。     

Voltammetric stripping analysis of metal concentrates with polymers soluble in aqueous solutions

The conditions were worked out for the simultaneous stripping voltammetric determination of components of the ternary Pb(II)-Cu(II)-Cd(II) and binary Ag(I)-Cu(II) systems at a carbon-paste electrode in 2% aqueous solutions of the water soluble polymer polyethyleneimine (PEI) and its thiourea-containing derivative (TU-PEI). Water-soluble polymers are shown to reduce the mutual effects of the components of the binary and ternary system at the electrode surface. The different complex stability of Ag(I), Pb(II) or Cd(II) and Cu(II) with PEI and TU-PEI allows Ag(I), Pb(II) and Cd(II) to be determined in the presence of a large excess of Cu(II).     

Determination of Fe(II), Cu(II) and Ag(I) by using silica gel loaded with 1,10-phenanthroline

The modified silica gel with 1,10-phenanthroline adsorbed was obtained. The adsorption from aqueous solutions onto loaded silica gel of Fe(II), Cu(II) and Ag(I) and their complexes was studied. The loaded silica gel was applied to Fe(II), Cu(II) and Ag(I) reflectance spectroscopy determinations in water (detection limits 0.08, 0.03 and 0.01 ppm respectively). Visual test scales for Fe, Cu and Ag ion determinations in water were worked out.     

A new resin containing benzimidazolylazo group and its use in the separation of heavy metals

A new resin incorporating benzimidazolylazo group into a matrix of polystyrene divinylbenzene has been prepared. The exchange capacity of the resin for the ions mercury(II), silver(I) and palladium(II) as a function of pH has been determined. The resin exhibits no affinity for alkali or alkaline earth metals. It is highly selective for Hg(II), Ag(I) and Pd(II). In column operation, it has been observed that Hg(II), Ag(I) and Pd(II) in trace quantities can be selectively separated from geological, medicinal and environmental samples.     

A chelating resin containing bis(2-benzimidazolylmethyl)amine: synthesis and metal-ion uptake properties suitable for analytical application

A new stable chelating resin was synthesized by incorporating the bis(2-benzimidazolyl methyl)amine into Merrifield polymer through CN covalent bond and characterized by elemental analysis, IR and thermal study. The sorption capacity of the newly formed resin for Ag(I), Cu(II), Fe(III), Hg(II) and Pb(II) as a function of pH have been studied. The resin exhibits no affinity for alkali or alkaline earth metals. In column operation it has been observed that Ag(I) in trace quantities can be separated from different complex matrices and Hg(II) can be removed from the river water spiked with Hg(II) at usual pH of natural waters.     

以硫醚为主链的螯合树脂研究Ⅳ．含硫代硫酸根、叠氮基树脂的合成及吸附性能

聚环硫氯丙烷或环硫氯丙烷与环氧氯丙烷共聚物，在少量二乙烯三胺存在下制得交联预聚物，将交联预聚物分别与硫代硫酸钠，叠氮化钠反应，制得四种侧链带有硫代硫酸根或叠氮基的新型螯合树脂。它们对贵金属离子具有较高的吸附容量和较好的吸附选择性。     

Effect of Polyethylenimine on the Selectivity of Determining Silver(I) by Stripping Voltammetry in the Presence of Copper(II)

It has been proposed that a water-soluble complexing polymer, polyethylenimine (PEI), be used to lower intermetallic interactions at the surface of solid electrodes in the determination of Ag(I) by stripping voltammetry in the presence of Cu(II). The introduction of PEI in the binary Ag(I)–Cu(II) system weakened the effect of Cu(II) on the anodic peak of Ag(I) and enhanced the selectivity in determining Ag(I) in the presence of excess amounts of Cu(II). With the use of PEI, Ag(I) can be determined at a Cu(II)-to-Ag(I) concentration ratio of 1000 : 1, compared to that of 20 : 1 in the absence of the polymer.     

Fast recovery of Au (III) and Ag(I) via amine-modified zeolitic imidazolate framework-8

In this paper, zeolitic imidazolate framework-8 modified by the ethanediamine (NH₂-ZIF-8) was employed for adsorbing Au (III) and Ag(I) from aqueous solutions. The adsorption capacities of NH₂-ZIF-8 towards Au (III) and Ag(I) were found to be significantly affected by the pH values of the solution. The adsorption kinetics studies show that NH₂-ZIF-8 presents a fast adsorption property towards metals, attaining 93% of adsorption equilibrium uptake for Au (III) within the first 30 min. This phenomenon can be ascribed to the coordination interaction between the amino group and Au (III). The thermodynamic data suggest that the adsorption of NH₂-ZIF-8 towards Au (III) is endothermic process, while that for Ag(I) is exothermic. The maximum adsorption capacities of NH₂-ZIF-8 toward Au (III) and Ag(I) can be achieved to 357 mg·g⁻¹ and 222.25 mg·g⁻¹, respectively. The metal ions interference results show that Cu (II) and Ni (II) hardly have no interference on Au (III) adsorption in e-waste containing 1500 mg·l⁻¹ Cu (II),100 mg·l⁻¹ Ni (II) and 10 mg·l⁻¹ Au (III); while for Ag(I), Cd (II) and Zn (II) have little interference on Ag(I) adsorption in the hybrid solutions containing Ag(I), Ni (II), Cd (II) and Zn (II) with equal concentration (50 mg·l⁻¹), but Ni (II) interference most. The XPS study shows that partial Au (III) was reduced to Au(I), and that Ag(I) was completely reduced to Ag(0) during the adsorption process. The abundant of active sites of NH₂-ZIF-8 containing C=N, N-H, and Zn-OH groups play a key role in the adsorption of Au (III) and Ag(I). In addition, electrostatic interaction can be responsible for the adsorption of Au (III) by NH₂-ZIF-8. The regeneration experiments results show that the adsorption capacities of NH₂-ZIF-8 towards Au (III) and Ag(I) can maintain after three cycles. This work provides a reliable method to improve the adsorption kinetics for metal ions.     

Coated-wire silver ion-selective electrode based on silver complex of cyclam.

A coated-wire ion-selective electrode (ISE) based on cyclam (1,4,8,11-tetraazacyclotetradecane) as a neutral carrier in a polyvinyl chloride (PVC) matrix was fabricated for the determination of Ag(I) ions. The coated-wire ISE exhibited a linear Nernstian response over the range 1 x 10(-1) to 1 x 10(-7) M with a slope of 59 +/- 2 mV per decade change and a detection limit of 5 x 10(-8) M. The ISE shows a greater preference for Ag over other cations with good precision. The electrode was selective towards Ag(I) ions in the presence of 13 different metal ions tested. The selectivity coefficients (K(ij)) were determined for Na(I), K(I), Mg(II), Ca(II), Ba(II), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Pb(II) and Hg(II). The selectivity coefficients of these cations are in the range of 10(-4) to 10(-2). This ISE was used for the determination of free silver and total silver in electroplating bath solutions, additives and brighteners.     

Vinyl 2-hydroxyethyl sulfide polymers and their sorption properties with respect to transition metals

Vinyl 2-hydroxyethyl sulfide (VHES) homopolymer and the homopolymer and vinyl 2-hydroxyethyl sulfide-acryl amide copolymer cross-linked by bisacrylamide were prepared by radical polymerization. The sorption of Au(III), Ag(I), Pd(II), Pt(IV), Hg(II), Pb(II), Fe(III), Ni(II), Cu(II) on these polymers under the static conditions was studied in relation to the solution pH. The polymers are highly selective and efficient sorbents for Au(III), Ag(I) and Hg(II).     

Voltammetric stripping analysis of metal concentrates with polymers soluble in aqueous solutions

The conditions were worked out for the simultaneous stripping voltammetric determination of components of the ternary Pb(II)-Cu(II)-Cd(II) and binary Ag(I)-Cu(II) systems at a carbon-paste electrode in 2% aqueous solutions of the water soluble polymer polyethyleneimine (PEI) and its thiourea-containing derivative (TU-PEI). Water-soluble polymers are shown to reduce the mutual effects of the components of the binary and ternary system at the electrode surface. The different complex stability of Ag(I), Pb(II) or Cd(II) and Cu(II) with PEI and TU-PEI allows Ag(I), Pb(II) and Cd(II) to be determined in the presence of a large excess of Cu(II). Received: 17 July 1997 / Revised: 1 December 1997 / Accepted: 3 December 1997     

Tris(2,2′-bipyridyl)iron(II)tetraphenylborate as a solid analytical reagent in the spectrophotometric determination of Ag(I), Tl(I), and Hg(II)

Analytical applications of a new solid reagent tris(2,2′-dipyridyl)iron(II) tetraphenylborate are described. The solid reagent selectively reacts with Ag(I), Tl(I), and Hg(II) cations to release the colored tris(2,2′-bipyridyl)iron(II) cation in solution, which is determined spectrophotometrically. The experimental data show that the Ag(I), Tl(I), and Hg(II) cations respond linearly in 5 to 50-ppm range.     

Photoactive chemosensors 3: a unique case of fluorescence enhancement with Cu(II)

Chemosensor (4a) shows fluorescence enhancement with Cu(II) and can estimate 1-300 microM Cu(II) by using fluorescence (1-20 MicroM) and UV-Vis (10-300 microM) spectroscopic techniques. Ni(II), Cd(II), Zn(II), Ag(I) and Hg(II) do not interfere in fluorescence studies and only Ag(I) and Hg(II) interfere in UV-Vis studies.     

Extraction of Sr(II), Ag(I) and Pb(II) by some oxa-tia- and tia-crown ethers

Liquid-liquid extraction of several cations by some oxa-tia- and tia-crown ethers was studied. Sr(II), Pb(II) and Ag(I) were taken as hard, borderline and soft Lewis acids, respectively. Trace amounts of²¹⁰Sr and^110mAg were used as chemical yield monitors. The results were explained by the Pearson theory. Some of the examined compounds posses high affinity towards Ag(I) and Pb(II) extraction. The distribution coefficent for Ag(I) reached the value of 140.