Nucleation and growth mechanism of Pd/Pt bimetallic clusters in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles as studied by in situ X-ray absorption spectroscopy

We report in situ X-ray absorption spectroscopy (XAS) investigations on the formation of palladium-platinum (Pd/Pt) bimetallic clusters at the early stage within the water-in-oil microemulsion system of water/AOT/n-heptane. The reduction of palladium and platinum ions and the formation of corresponding clusters are monitored as a function of dosage of reducing agent, hydrazine (N(2)H(5)OH). Upon successive addition of the reducing agent, hydrazine (N(2)H(5)OH), five distinguishable steps are observed in the formation process of Pd/Pt clusters at the early stage. Both in situ X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) analysis for both the Pd K-edge and Pt L(III)-edge revealed the formation of Pd/Pt bimetallic clusters. A corresponding structural model is proposed for each step to provide a detailed insight into the nucleation and growth mechanism of Pd/Pt bimetallic clusters. We also discussed the atomic distribution of Pd and Pt atoms in Pd/Pt bimetallic clusters based on the calculated XAS structural parameters.     

Nucleation reaction dynamics of Pt nanoparticles observed by the heterodyne transient grating method

The nucleation reaction dynamics of platinum nanoparticles in the photoreduction process of H(2)Pt(IV)Cl(6) solution were investigated by the heterodyne transient grating (HD-TG) method. The formation mechanism of platinum nanoparticles was considered, supported by information obtained from UV/VIS absorption spectroscopy during the reaction and SEM images of the generated nanoparticles. In particular, the roles of poly(N-vinyl-2-pyrrolidone) (PVP) as a protective polymer and ethanol as a solvent were studied. The chemical species involved in the reaction can be identified from the diffusion coefficients obtained from HD-TG measurements; the species observed by UV pulse irradiation were assigned to H(2)Pt(IV)Cl(6) as a reactant species and H(2)Pt(II)Cl(4) and Pt nuclei as product species. It was observed that the amounts of the reactant and product species increased, and many homogeneous nanoparticles were generated, by an increase in PVP concentration. The addition of ethanol to the solvent showed a larger effect on the enhancement of the reduction of H(2)Pt(IV)Cl(6) than that of PVP; however, it did not lead to Pt nuclei formation in the order of seconds. Nevertheless, because nanoparticle formation was confirmed by UV/VIS absorption spectroscopy and SEM images, the formation of nanoparticles following nuclei formation must have proceeded via a slow reaction. Therefore, nucleation and nanoparticle formation are considered to occur on a longer time scale than 10 s in water/ethanol solvent.     

Nucleation and aggregative growth process of platinum nanoparticles studied by in situ quick XAFS spectroscopy

The early stage in the nucleation and subsequent aggregative particle growth of the colloidal platinum (Pt) dispersions produced by photoreduction in an aqueous ethanol solution of poly(N-vinyl-2-pyrrolidone) (PVP) was quantitatively investigated by means of in situ quick XAFS (QXAFS) measurements. The stages of the reduction-nucleation and the association process (aggregative particle growth and Ostwald ripening) of Pt atoms to produce Pt nanoparticles was successfully discriminated in course of the photoreduction time. The present QXAFS analysis indicated that Pt nuclei (i.e., (Pt(0))(m) nucleates approximately m = 4) were continuously produced in the reduction-nucleation process at the early time, followed by the aggregative particle growth with the autocatalytic reduction of Pt ionic species on the surface of Pt nuclei to produce Pt nanoparticles. Subsequently the particle growth proceeded via Ostwald ripening, resulting in the production of larger Pt nanoparticles at a later time. It was also found that the aggregative particle growth follows a sigmoidal profile well described either by the solid-state kinetic model or by the chemical-mechanism-based kinetic model, specifically the Avrami-Erofe'ev or Finke-Watzky models. The difference in terms of the formation mechanism was observed between the reduction of Pt(IV)Cl(6)(2-) and Pt(II)Cl(4)(2-) as a source material. Also presented is that the addition of the photoactivator such as benzoin, benzophenone, and acetophenone in the system is very effective to enhance the rate for the formation of Pt nanoparticles.     

Kinetic Monte Carlo simulations of the interaction of oxygen with Pt(111)

The adsorption, dissociation, diffusion, and desorption of oxygen interacting with the Pt(111) surface have been studied using kinetic Monte Carlo simulations. This study has been motivated by uncertainties in the theoretical and the experimental derivations of O(2)Pt(111) reaction barriers. The simulations reproduce all known experimental data within basically one set of parameters, thus yielding microscopic insights into the elementary reaction steps occurring in the interaction of oxygen with Pt(111) and providing reliable estimates for adsorption energies and diffusion and desorption barriers. In particular, we confirm that the distance of oxygen atoms directly after dissociation is caused by ballistic hot atom motion rather than by diffusive motion. We address the equilibrium structure of oxygen atoms at high coverages. At low temperatures, chains of oxygen pairs are formed. We show that this mechanism can be explained by a lowered dissociation in the vicinity of already adsorbed atoms. Finally we discuss the role of the lateral interaction between the oxygen atoms in the oxygen desorption process.     

Quantitative Analysis of the Reduction Kinetics of a Pt(Ⅱ) Precursor in the Context of Pt Nanocrystal Synthesis?

In this letter, we report a quantitative analysis of how a Pt(Ⅱ) precursor is reduced to atoms at different temperatures for the formation of Pt nanocrystals with different morphologies and sizes. Our results suggest that in the early stage of a synthesis, the Pt(Ⅱ) precursor is reduced to atoms exclusively in the solution phase, followed by homogeneous nucleation to generate nuclei and then seeds. At a relatively low reaction temperature such as 22℃, the growth of the seeds is dominated by autocatalytic surface reduction that involves the adsorption and then reduction of the Pt(Ⅱ) precursor on the surface of the just-formed seeds. This particular growth pathway results in relatively large assemblies of Pt nanocrystals. When the reaction temperature is increased to 100℃, the dominant reduction pathway will be switched from surface to solution phase, producing much smaller assemblies of Pt nanocrystals. Our results also demonstrate that a similar trend applies to the seed-mediated growth of Pt nanocrystals in the presence of Pd nanocubes.     

Kinetics and mechanism of nitrate and nitrite electroreduction on Pt(100) electrodes modified by copper adatoms

Kinetics and mechanism of nitrate and nitrite reduction on Pt(100) electrode modified by Cu adatoms have been studied in solutions of sulfuric and perchloric acids by means of cyclic voltammetry and in situ IR-spectroscopy. It has been shown that the surface redox process with participation of ammonia or hydroxylamine at 0.5–0.9 V occurs only on the Cu-free platinum. The causes of this effect could be low adsorption energy of nitrate reduction products on copper or changes in the composition of the products (ammonia for Pt(100) and N₂O for Pt(100)+Cu). Nitrate reduction on Pt(100)+Cu electrode is much faster in the perchloric acid solution (by several orders of magnitude) as compared with unmodified platinum as a result of induced adsorption of nitrate anions in the presence of partly charged Cu atoms. In the solutions of sulfuric acid the rate of nitrate reduction is considerably lower as copper adatoms facilitate adsorption of sulfate anions, which block the adsorption sites for the nitrate.     

Raman studies on the interaction of the reactants with the platinum nanoparticle surface during the nanocatalyzed electron transfer reaction

Raman studies are conducted to understand the specific interactions between the individual reactants and the platinum nanoparticle surface during the nanocatalyzed electron transfer reaction between hexacyanoferrate (III) ions and thiosulfate ions. When Pt nanoparticles are added to the thiosulfate ion solution, a shift in the symmetric SS stretching mode is observed compared to the frequency observed for the free thiosulfate ions in solution, suggesting that binding to the Pt nanoparticle surface occurs via the S- ion. It is also observed that there are no shifts in the symmetric and asymmetric OSO bending or SO stretching frequencies. This suggests that the thiosulfate ions do not bind to the nanoparticle surface via the O- ion. When platinum nanoparticles are added to the hexacyanoferrate(III) ion solution, evidence is found for both adsorbed hexacyanoferrate(III) ions and a platinum cyanide complex. For adsorbed hexacyanoferrate(III) ions, the CN stretching frequency is observed at 2101 cm(-1) and the Fe-C stretching frequency is found at 368 cm(-1). The observed CN stretching frequencies located at 2147 and 2167 cm(-1) provide strong evidence that there is a Pt(CN)4(2-) platinum cyanide complex formed. In addition, the Pt-CN band is also observed at 2054 cm(-1). These observed bands provide spectroscopic evidence that the hexacyanoferrate(III) ions dissolve by forming a complex with the surface platinum atoms of the nanoparticles. Raman spectra of the product mixtures are obtained after the completion of the reaction when carried out with higher reactant concentrations to observe the Raman spectra, but with a similar 10:1 ratio of thiosulfate to hexacyanoferrate(III) ions as used previously, with and without PVP-Pt nanoparticles at a correspondingly higher concentration. It is observed that there are no shifts in the characteristic Raman bands associated with hexacyanoferrate(II) ions and no evidence for the formation of adsorbed hexacyanoferrate(II) species or platinum cyanide complexes in the presence of the platinum nanoparticles. In addition, there is evidence for the shifted symmetric SS stretching mode, suggesting that some of the unreacted thiosulfate (present in large excess) is bound to the Pt nanoparticle surface. Thus, under the actual reaction conditions, the hexacyanoferrate(III) ions preferentially react with adsorbed thiosulfate ions to form the reaction products, and this supports the surface catalytic mechanism we proposed previously.     

Probing nucleation pathways for morphological manipulation of platinum nanocrystals

Understanding the formation process in the controlled synthesis of nanocrystals will lead to the effective manipulation of the morphologies and properties of nanomaterials. Here, in-situ UV-vis and X-ray absorption spectroscopies are combined to monitor the tracks of the nucleation pathways in the solution synthesis of platinum nanocrystals. We find experimentally that the control over nucleation pathways through changing the strength of reductants can be efficiently used to manipulate the resultant nanocrystal shapes. The in-situ measurements show that two different nucleation events involving the formation of one-dimensional "Pt(n)Cl(x)" complexes from the polymerization of linear "Cl(3)Pt-PtCl(3)" dimers and spherical "Pt(n)(0)" clusters from the aggregation of Pt(0) atoms occur for the cases of weak and strong reductants; and the resultant morphologies are nanowires and nanospheres, respectively. This study provides a crucial insight into the correlation between the particle shapes and nucleation pathways of nanomaterials.     

Methodical aspects of studying the electroreduction of nitrate on modified single crystal Pt(hkl) + Cu electrodes

Technique of modification of basal faces Pt(hkl) by adatoms and epitaxial copper deposits is developed. Analysis of potentiostatic current transients of copper deposition/dissolution and atomic force microscopy showed that the activity of Pt(hkl) faces regarding the processes of copper nucleation and epitaxial growth increases in the sequence of Pt(111) < Pt(110) < Pt(100). The reaction of nitrate anion reduction is sensitive towards the surface structure, not only in the case of platinum, but also in the case of copper deposits (including a monolayer of adatoms). The highest process rate is observed for the Pt(100) electrode modified by a monolayer of adatoms or islands of bulk copper; nitrate reduction at the lowest rate occurs at Pt(111) + Cu electrodes. Structure-sensitive competitive adsorption of background electrolyte and nitrate anions is the factor that largely determines the kinetics of nitrate reduction on different faces of platinum single crystal and copper deposits.     

Study of nucleation and growth mechanism of the metallic nanodumbbells

We propose a general nucleation and growth model that can explain the mechanism of the formation of CoPt(3)/Au, FePt/Au, and Pt/Au nanodumbbells. Thus, we found that the nucleation event occurs as a result of reduction of Au(+) ions by partially oxidized surface Pt atoms. In cases when Au(3+) is used as a gold precursor, the surface of seeds should be terminated by ions (e.g., Co(2+), Pb(2+)) that can reduce Au(3+) to Au(+) ions, which can further participate in the nucleation of gold domain. Further growth of gold domain is a result of reduction of both Au(3+) and Au(+) by HDA at the surface of gold nuclei. We explain the different ability of CoPt(3), Pt, and FePt seeds to serve as a nucleation center for the reduction of gold and further growth of dumbbells. We report that the efficiency and reproducibility of the formation of CoPt(3)/Au, FePt/Au, and Pt/Au dumbbells can be optimized by the concentration and oxidation states of the surface ions on metallic nanocrystals used as seeds as well as by the type of the gold precursor.     

Precise investigation of the axial ligand substitution mechanism on a hydrogenphosphato-bridged lantern-type platinum(III) binuclear complex in acidic aqueous solution

Detailed equilibrium and kinetic studies on axial water ligand substitution reactions of the "lantern-type" platinum(III) binuclear complex, [Pt(2)(mu-HPO(4))(4)(H(2)O)(2)](2)(-), with halide and pseudo-halide ions (X(-) = Cl(-), Br(-), and SCN(-)) were carried out in acidic aqueous solution at 25 degrees C with I = 1.0 M. The diaqua Pt(III) dimer complex is in acid dissociation equilibrium in aqueous solution with -log K(h1) = 2.69 +/- 0.04. The consecutive formation constants of the aquahalo complex () and the dihalo complex () were determined spectrophotometrically to be log = 2.36 +/- 0.01 and log = 1.47 +/- 0.01 for the reaction with Cl(-) and log = 2.90 +/- 0.04 and log = 2.28 +/- 0.01 for the reaction with Br(-), respectively. In the kinetic measurements carried out under the pseudo-first-order conditions with a large excess concentration of halide ion compared to that of Pt(III) dimer (C(X)()- > C(Pt)), all of the reactions proceeded via a one-step first-order reaction, which is a contrast to the consecutive two-step reaction for the amidato-bridged platinum(III) binuclear complexes. The conditional first-order rate constant (k(obs)) depended on C(X)()- as well as the acidity of the solution. From kinetic analyses, the rate-limiting step was determined to be the first substitution process that forms the monohalo species, which is in rapid equilibrium with the dihalo complex. The reaction with 4-penten-1-ol was also kinetically investigated to examine the reactivity of the lantern complex with olefin compounds.     

Dynamics of the dissociation of hydrogen on stepped platinum surfaces using the ReaxFF reactive force field

The dissociation of hydrogen on eight platinum surfaces, Pt(111), Pt(100), Pt(110), Pt(211), Pt(311), Pt(331), Pt(332), and Pt(533), has been studied using molecular dynamics and the reactive force field, ReaxFF. The force field, which includes the degrees of freedom of the atoms in the platinum substrate, was used unmodified with potential parameters determined from previous calculations performed on a training set exclusive of the surfaces considered in this work. The energetics of the eight surfaces in the absence of hydrogen at 0 K were first compared to previous density functional theory (DFT) calculations and found to underestimate excess surface energy. However, taking Pt(111) as a reference state, we found that the trend between surfaces was adequately predicted to justify a relative comparison between the various stepped surfaces. To assess the strengths and weaknesses of the force field, we performed detailed simulations on two stepped surfaces, Pt(533) and Pt(211), and compared our findings to published experimental and theoretical results. In general, the absolute magnitude of reaction rate predictions was low, a result of the force field's tendency to underpredict surface energy. However, when normalized, the simulations show the correct linear scaling with incident energy and angular dependence at collision energies where a direct dissociation mechanism is observed. Because ReaxFF includes all degrees of freedom in the substrate, we carried out simulations aimed at understanding surface-temperature effects on Pt(533). On the basis of the results on Pt(533)/Pt(211), we studied the reaction of hydrogen at normal incidence on all eight surfaces in a range of energies where we anticipated the force field to give reasonable qualitative trends. These results were subsequently fit to a simple linear model that predicts the enhanced reactivity of surfaces containing 111-type atomic steps versus 100-type atomic steps. This model provides a simple framework for predicting high-energy/high-temperature kinetics of complex surfaces not vicinal to Pt(111).     

Oxygen electroreduction at catalysts PtM (M = Co,Ni, or Cr)

Bimetallic catalysts PtM (M = Co, Ni, or Cr) are synthesized. They exceed purely platinum commercial catalyst E-TEK (20 wt % Pt) in its mass activity (mA/mg_Pt) and specific activity (mA/c_Pt²) in the oxygen reduction reaction. According to XRD data, the high-temperature synthesis involving metal N₄-complexes, chloroplatinic acid, and XC72 carbon black as precursors, yields alloys (or solid solutions) of the metals. The higher activity of the bimetallic catalyst PtCo/C is likely to be caused by the practically entire formation of solid solutions (Pt₃Co and PtCo), unlike PtNi and PtCr where nickel and chromium exist also as oxides that decorate the electrode surface and partly block active centers. It is shown that the mechanism of the oxygen reduction reaction at the synthesized catalysts is similar to that of oxygen reduction at the purely platinum catalyst. The slow stage in the process is transfer of the 1st electron; at potentials more positive than 0.6 V the reaction mainly yields water. The higher electrocatalytic activity of the bimetallic systems is caused by the alloy formation, which leads to changes in the bond length between platinum atoms. The achieving of the optimal bond length, as a result of the alloy formation, provides appropriate conditions for dissociative adsorption of oxygen molecules; the surface coverage with oxygen-containing particles adsorbed from water (which block active centers for O₂ adsorption) decreased. The increase in the activity may also be caused by the formation of the “core-shell” structures whose surface is enriched with platinum whose surface properties are changed under the ligand action of the core formed by the metal alloy     

Electroreduction of peroxodisulfate anion at platinum rotating disc electrode in the cyclic voltammetry mode

Electroreduction of peroxodisulfate anion at smooth polycrystalline and platinized (at different deposition potentials) platinum in perchloric acid and sulfuric acid solutions is studied by rotating disc electrode and cyclic voltammetry techniques. Dependences of the process rate on the electrode rotating velocity, the potential scan rate, the anodic limit of the scanning, the peroxodisulfate anion concentration in the solution and the platinizing conditions are found. The suggestion on the complications in the peroxodisulfate anion reduction caused by adsorbate formation is corroborated, at least, for certain potential region. The reaction structure sensitivity is evidenced, which makes it possible to use the reaction for characterization of the platinized Pt surface structure. The comparing of obtained results with literature data concerning smooth platinum and the single-crystal platinum basis faces allows concluding that the peroxodisulfate anion reduction maximal rate in sulfuric-acid solutions occurs at the potentials close to those observed for the (110) face. When the platinized Pt surface roughness factor exceeds ~30, the peroxodisulfate anion reduction reaction proceeds under the inner-diffusion limitation control. The platinized-Pt rotating disc electrode can serve as model tool in the studying of properties of disperse material microdeposits.     

Surface characterization of Pt electrodes using underpotential deposition of H and Cu: Part I. Pt(100)

This paper is the first in a series describing the in situ surface characterization of platinum electrodes using H and Cu deposited at underpotentials. The surface of a Pt(100) electrode pretreated by simple flame annealing and quenching in aqueous sulfuric acid is shown to contain a high concentration of defects such as vacancies and self-adsorbed Pt atoms. Adsorbed hydrogen is more strongly bound at these defects than on a uniform Pt(100) surface. Potential cycling in 1 M HCl produces a higher concentration of defects, while oxide formation and reduction in 0.5 M H₂SO₄ has the opposite effect. The nature of (100)-like sites at a polycrystalline platinum electrode is also discussed.     

Mechanism of the axial ligand substitution reactions on the head-to-tail alpha-pyridonato-bridged cis-diammineplatinum(III) dinuclear complex with olefins

Reactions of the head-to-tail alpha-pyridonato-bridged cis-diammineplatinum(III) dinuclear complex having equivalent two platinum atoms, Pt(N(3)O), with p-styrenesulfonate and 4-penten-1-ol were studied kinetically. Under the pseudo first-order reaction conditions in which the concentration of the Pt(III) dinuclear complex is much smaller than that of olefin, a consecutive basically four-step reaction was observed for the reaction with p-styrenesulfonate, but for the reaction with 4-penten-1-ol, the reaction was three step. The olefin pi-coordinates to one of the two equivalent Pt atoms in the first step (step 1), followed by the second pi-coordination of another olefin molecule to the other Pt atom (step 2). In the next step (step 3), the nucleophilic attack of water to the first pi-coordinated olefin initiates its pi-sigma bond conversion on the Pt atom, and the second pi-bonding olefin molecule on the other Pt atom is released. Finally, dissociation of the alkyl group on the Pt(N(3)O) and reduction of the Pt(III) dinuclear complex to the Pt(II) dinuclear complex occur (step 4). The first water substitution with olefin (step 1) consists of two paths, the reaction of the diaqua dimer complex (path a) and the reaction of the aquahydroxo dimer complex (path b), whereas the second substitution (step 2) proceeds through three reaction paths: the normal path of the direct substitution of H(2)O (path c), the path of the coordinated OH(-) substitution (path d), and the path via the coordinatively unsaturated five-coordinate intermediate (path e). The reaction with p-styrenesulfonate proceeds through paths c, d, and e, whereas the reaction with 4-penten-1-ol proceeds through paths c and d. The third step (step 3) for the reaction with p-styrenesulfonate involves the coordinatively unsaturated intermediate, but that for the 4-pentene reaction does not. The reactivities of the HH dimer and HT dimer with olefins are compared and discussed.     

Dinuclear Pt(II)-bisphosphonate complexes: a scaffold for multinuclear or different oxidation state platinum drugs

Geminal bisphosphonates (BPs), used in the clinic for the treatment of hypercalcaemia and skeletal metastases, have been also exploited for promoting the specific accumulation of platinum antitumor drugs in bone tissue. In this work, the platinum dinuclear complex [{Pt(en)}(2)(μ-AHBP-H(2))](+) (1) (the carbon atom bridging the two phosphorous atoms carrying a 2-ammonioethyl and a hydroxyl group, AHBP-H(2)) has been used as scaffold for the synthesis of a Pt(II) trinuclear complex, [{Pt(en)}(3)(μ-AHBP)](+) (2), and a Pt(IV) adamantane-shaped dinuclear complex featuring an oxo-bridge, [{Pt(IV)(en)Cl}(2)(μ-O)(μ-AHBP-H(2))](+) (3) (X-ray structure). Compound 2 undergoes a reversible, pH dependent, rearrangement with a neat switch point around pH = 5.4. Compound 3 undergoes a one-step electrochemical reduction at E(pc) = -0.84 V affording compound 1. Such a potential is far lower than that of glutathione (-0.24 V), nevertheless compound 3 can undergo chemical reduction to 1 by GSH, most probably through a different (inner-sphere) mechanism. In vitro cytotoxicity of the new compounds, tested against murine glioma (C6) and human cervix (HeLa) and hepatoma (HepG2) cell lines, has shown that, while the Pt(IV) dimer 3 is inactive up to a concentration of 50 μM, the two Pt(II) polynuclear compounds 1 and 2 have a cytotoxicity comparable to that of cisplatin with the trinuclear complex 2 generally more active than the dinuclear complex 1.     

Platinum(II)-catalyzed cyclization sequence of aryl alkynes via C(sp3)-H activation: a DFT study

The mechanism and intermediates of hydroalkylation of aryl alkynes via C(sp(3))-H activation through a platinum(II)-centered catalyst are investigated with density functional theory at the B3LYP/[6-31G(d) for H, O, C; 6-31+G(d,p) for F, Cl; SDD for Pt] level of theory. Solvent effects on reactions were explored using calculations that included a polarizable continuum model for the solvent (THF). Free energy diagrams for three suggested mechanisms were computed: (a) one that leads to formation of a Pt(II) vinyl carbenoid (Mechanism A), (b) another where the transition state implies a directed 1,4-hydrogen shift (Mechanism B), and (c) one with a Pt-aided 1,4-hydrogen migration (Mechanism C). Results suggest that the insertion reaction pathway of Mechanism A is reasonable. Through 4,5-hydrogen transfer, the Pt(II) vinyl carbenoid is formed. Thus, the stepwise insertion mechanism is favored while the electrocyclization mechanism is implausible. Electron-withdrawing/electron-donating groups substituted at the phenyl and benzyl sp(3) C atoms slightly change the thermodynamic properties of the first half of Mechanism A, but electronic effects cause a substantial shift in relative energies for the second half of Mechanism A. The rate-limiting step can be varied between the 4,5-hydrogen shift process and the 1,5-hydrogen shift step by altering electron-withdrawing/electron-donating groups on the benzyl C atom. Additionally, NBO and AIM analyses are applied to further investigate electronic structure changes during the mechanism.     

Platinum(II) Complexes of Cyclic Triphosphenium Ions: a (31)P NMR Spectroscopic and Computational Study

The first transition metal complexes of cyclic triphosphenium ions have been unequivocally identified in solution by (31)P NMR spectroscopy. The ligands coordinate to platinum(II) via the central phosphorus atom, but only when at least one of the outer phosphorus atoms has non-aromatic substituents. Depending on the system, either trans- (the kinetic reaction product) and/or cis- (the thermodynamic reaction product) complexes are formed. The (1)J coupling constants between (195)Pt and the central phosphorus atom of the CTI (P(A)) are small for both cis- and trans-isomers, between 900 and 1300 Hz, whereas other phosphanes in these complexes derived from the platinum(II) starting material show normal (1)J(PtP) values. These results suggest a possible long P-Pt bond between the overall positively charged ligand and the platinum(II) cation. Calculations including predicted (31)P NMR shifts for the CTIs and their Pt(II) complexes largely support our experimental findings.     

Diastereoselective assembling of 21-C-alkylated nickel(II) complexes of inverted porphyrin on a platinum(II) template

Reaction of 21-C-methyl and 21-C-benzyl nickel(II) complexes of inverted meso-tetratolylporphyrin with platinum(II) dichloride or its bis(benzonitrile) complex yields a chloroplatinum(II) species containing two nickel(II) carbaporphyrinoids in a cis arrangement. One of the carbaporphyrinoids coordinates to the platinum ion with the external nitrogen while the other is bound with the external nitrogen and one ortho-carbon of the adjacent meso-aryl ring. The reaction is highly chemoselective. (1)H and (13)C NMR experiments in solution show the diastereoselectivity of the reaction. Single-crystal X-ray data confirm the presence of the diastereomer with opposite configurations of the Ni(II)-coordinated carbons in the subunits of the dimer. Cyclovoltammetric measurements reveal an anodic shift of the nickel(II) oxidation potentials of dimers with respect to those of the parent monomers and two different reduction couples. Reaction of unsubstituted inverted porphyrin with Pt(PhCN)(2)Cl(2) in chlorobenzene yields a monomeric platinum(II) complex of inverted porphyrin. This complex displays a markedly upfield (195)Pt NMR shift compared to tetraphenylporphyrinatoplatinum(II). Under strongly basic conditions deprotonation of the external nitrogen of inverted porphyrin and both electrochemical and chemical oxidation of platinum(II) center are observed.