Direct chiral resolution of tartaric acid in food products by ligand exchange capillary electrophoresis using copper(II)-D-quinic acid as a chiral selector.

Chiral resolution of native DL-tartaric acid was performed by ligand-exchange capillary electrophoresis using copper(II)-D-quinic acid as a chiral selector. Factors affecting chiral resolution, migration time, and peak area of tartaric acid were studied. The running conditions for optimum separation of tartaric acid were found to be 1 mM copper(II) sulfate-10 mM D-quinic acid (pH 5.0) with an effective voltage of -15 kV at 30 degrees C, using direct detection at 250 nm, and resolution of racemic tartaric acid was approximately 1.3. With this system, chiral resolution of DL-tartaric acid in food products was conducted successfully.     

Direct chiral resolution of malic acid in apple juice by ligand-exchange capillary electrophoresis using copper(II)-L-tartaric acid as a chiral selector

Chiral resolution of native DL-malic acid was achieved by ligand-exchange capillary electrophoresis using copper(II)-L-tartrate as a chiral selector. Factors affecting chiral resolution, migration time, and peak area of malic acid were studied. The running conditions for optimum separation of malic acid were found to be 1 mM copper(II) sulfate-1 mM L-tartrate (pH 5.1) with an effective voltage of -20 kV at 30 degrees C, using direct detection at 280 nm, and resolution (Rs) of racemic malic acid was approximately 4. With this system, D- and L-malic acids in apple juice were analyzed successfully.     

Determination of hydroxycarboxylic acids in food products by capillary electrophoresis

A procedure for the capillary-electrophoretic determination of lactic, malic, tartaric, and citric acids in food products was developed. The use of 3-nitrobenzoic acid as a light-absorbing component of the running buffer was proposed for the indirect photometric detection of these substances. This considerably increased the determination sensitivity (up to n × 10 ??g/L), as compared with currently available analogs. The composition of the running buffer was optimized: 3-nitrobenzoic acid, 10 mM; cetyltrimethylammonium bromide, 0.5 mM; EDTA, 0.1 mM; and monoethanolamine, to pH 5.3. The procedure was tested with the samples of food products: fruits, juices, nectars, wines, beer, etc. The accuracy of the analytical results was confirmed by the standard addition method.     

毛细管电泳氨类手性药物对映体拆分机理研究

手性药物及其对映体在药理上可表现出较大的差异,对它们进行研究将具有重要的理论意义和实用价值[1,2].毛细管区带电泳因其分离效率高、药品和试剂用量少、方法简单而成为目前手性拆分鉴定的重要方法之一[3].     

Optimization of the chiral resolution of baclofen by capillary electrophoresis using beta-cyclodextrin as the chiral selector

The chiral resolution of baclofen was achieved by capillary electrophoresis using a fused-silica capillary (60 cm x 75 microm ID). The background electrolyte (BGE) was phosphate buffer (pH 7.0, 50 mM)-acetonitrile (95:5 v/v) containing 10 mM beta-cyclodextrin. The applied voltage was 15 kV. The values of alpha and R(s) were 1.06 and 1.00, respectively. The electrophoretic conditions were optimized varying the pH and the ionic strength of the BGE, concentrations of beta-cyclodextrin and acetonitrile and the applied voltage.     

Analysis of acrylamide in food products by in-line preconcentration capillary zone electrophoresis

Two in-line preconcentration capillary zone electrophoresis (CZE) methods (field amplified sample injection (FASI) and stacking with sample matrix removal (LVSS)) have been evaluated for the analysis of acrylamide (AA) in foodstuffs. To allow the determination of AA by CZE, it was derivatized using 2-mercaptobenzoic acid. For FASI, the optimum conditions were water at pH > or = 10 adjusted with NH3 as sample solvent, 35 s hydrodynamic injection (0.5 psi) of a water plug, 35 s of electrokinetic injection (-10 kV) of the sample, and 6s hydrodynamic injection (0.5 psi) of another water plug to prevent AA removal by EOF. In stacking with sample matrix removal, the reversal time was found to be around 3.3 min. A 40 mM phosphate buffer (pH 8.5) was used as carrier electrolyte for CZE separation in both cases. For both FASI and LVSS methods, linear calibration curves over the range studied (10-1000 microg L(-1) and 25-1000 microg L(-1), respectively), limit of detection (LOD) on standards (1 microg L(-1) for FASI and 7 microg L(-1) for LVSS), limit of detection on samples (3 ng g(-1) for FASI and 20 ng g(-1) for LVSS) and both run-to-run (up to 14% for concentration and 0.8% for time values) and day-to-day precisions (up to 16% and 5% for concentration and time values, respectively) were established. Due to the lower detection limits obtained with the FASI-CZE this method was applied to the analysis of AA in different foodstuffs such as biscuits, cereals, crisp bread, snacks and coffee, and the results were compared with those obtained by LC-MS/MS.     

Determination of pesticides in environmental materials and food products by capillary electrophoresis

A survey of electrophoresis methods for the determination of pesticides from different classes in environmental materials and food products is presented. The main sample preparation procedures, the cleaning of extracts, and the use of various versions of capillary electrophoresis are considered.     

毛细管电泳的手性拆分(文献综述)

 根据最近文献,对毛细管电泳在手性拆分领域中的应用和发展进行了评述,包括各种操作模式和各类手性选择剂,进一步评述了手性拆分机理的研究,显示出毛细管电泳是手性拆分的一种高效、快速、简便的分离手段。     

Fundamental aspects of chiral separations by capillary electrophoresis

A review is presented that surveys the basic theory of direct separation of enantiomers by capillary electrophoretic (CE) techniques. These separations are based on the formation of diastereomeric complexes between the enantiomeric analytes and a chiral selector added to the electrolyte solution. The review covers a comprehensive treatment of the equations needed for optimization of selectivity coefficients, resolution and analysis time in the zone electrophoretic mode. In this context, it takes into account combined equilibria of complexation and protonation/deprotonation as well as complexation and paritition into micelles. On the basis of these equations, the benefits of charged selectors and the optimization potential inherent to pH tuning can be documented. In addition, the review deals with some basic aspects of chiral isoelectric focusing and briefly discusses indirect enantioseparation. In a subsequent section a survey is given on particularfeatures of the various types of chiral selectors. Finally, the recent developments in preparative enantioseparation in continuous free-flow system and by use of isoelectric membranes are discussed.     

毛细管电泳在手性化合物分离中的应用进展

由于手性化合物尤其是手性药物的两个对映体具有不同的化学性质和生理活性,对手性化合物进行分离在医药、生物、食品和环境等领域都具有十分重要的意义。毛细管电泳由于其独特的优势已广泛应用于手性物质的分离。本文对2013~2015年毛细管电泳用于手性分离的最新进展进行了综述,并对其发展前景进行了展望。     

Determination of additives in food by capillary electrophoresis

The application of capillary electrophoresis (CE) to the analysis of additives in food has been reviewed. Additives included in the review are preservatives, antioxidants, sweeteners, colourings, caffeine, niacin, choline, nitrate, and nitrite. The review highlights the versatility of CE in separating this often widely disparate group of compounds. The application of the methods to real food samples is also discussed.     

Separation of linoleic acid oxidation products by micellar electrokinetic capillary chromatography and nonaqueous capillary electrophoresis

In this work the suitability of micellar electrokinetic capillary chromatography (MEKC) and nonaqueous capillary electrophoresis (CE) to the analysis of the primary oxidation products of linoleic acid was studied with uncoated fused-silica capillaries. The primary autoxidation products of linoleic acid are the four hydroperoxide isomers 13-hydroperoxy-cis-9, trans-11-octadecadienoic acid, 13-hydroperoxy-trans-9, trans-11-octadecadienoic acid, 9-hydroperoxy-trans-10,cis-12-octadecadienoic acid, 9-hydroperoxy-trans-10, trans-12-octadecadienoic acid. Addition of a surfactant such as sodium dodecyl sulfate (SDS) or sodium cholate (SC) into the running buffer (20-30 mM 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS) or ammonium acetate, pH 9.5-11) was required to enhance the water solubility of the sample and selectivity of the separation. MEKC proved to be a promising new technique for the separation of the primary oxidation products of lipids giving results comparable to high performance liquid chromatography (HPLC). Partial separation of hydroperoxide isomers was also achieved using nonaqueous CE with methanol-acetonitrile-sodium cholate as running buffer.     

Enantiomeric resolution of chiral imidazole derivatives using capillary electrophoresis with cyclodextrin-type buffer modifiers

Enantiomeric resolutions of some chiral pharmaceuticals containing the imidazole (1,3-diazole) moiety were carried out using capillary electrophoresis. Various native cyclodextrins (ga-, β- and γ-cyclodextrin) and derivatized cyclodextrins (hydroxypropyl-, and sulfobutyl ether-β-cyclodextrin) were used as chiral buffer modifiers. The effects of the cavity size, the structure and the charge of the selectors on the chiral recognition ability were evaluated. The influence of the type and concentration of the organic modifier on the separation of miconazole enantiomers and the pH of the run buffer on the separation of enilconazole enantiomers was also studied.     

Quantitative determination of drug encapsulation in poly(lactic acid) nanoparticles by capillary electrophoresis

Capillary electrophoretic (CE) methods were used for the quantitative determination of model drugs [salbutamol sulphate (SS), sodium cromoglycate (SCG) and beclomethasone dipropionate (BDP)] in poly(D,L-lactic acid) (PLA) nanoparticles, which were prepared by the nanoprecipitation method. Zeta potential and size distribution of the nanoparticles were determined by electrophoretic mobility determinations and photon correlation spectroscopy, respectively. Interactions between the drugs, the PLA nanoparticles and the fused-silica capillary were investigated by electrokinetic capillary chromatography (EKC). A quantitative CE method was developed for salbutamol sulphate and sodium cromoglycate, and the linearity and repeatability of migration times, peak areas and peak heights were determined. Microemulsion electrokinetic chromatography was used for the quantitative determination of beclomethasone dipropionate. According to this study, the applied electromigration techniques were suitable for the interaction, drug entrapment and dissolution studies of pharmaceutical nanoparticles. The results suggest that even quantitation of the drug located inside the nanoparticles was possible. Encapsulation of the more hydrophilic model drugs (SS, SCG) in the PLA nanoparticles was less efficient than in the case of BDP.     

Enantiomeric separation of chiral peptide nucleic acid monomers by capillary electrophoresis with charged cyclodextrins

Direct chiral separation of chiral peptide nucleic acid (PNA) monomers has been achieved for the first time by capillary electrophoresis (CE) with charged cyclodextrins as chiral selectors added to the electrophoretic buffer. Selectively modified 6-deoxy-6-N-histamino-beta-cyclodextrin and sulfobutyl ether-beta-CD were successfully used as chiral selectors for the enantiomeric separation of chiral monomers based on different aminoethylamino acids bearing thymine or adenine as nucleobases. Chiral separations were obtained at low selector concentrations (1-3 mM) with good enantioselectivity and resolution factors. Separations were optimized as a function of pH in order to exploit the effect of the electrostatic interactions between the oppositely charged selector and selectand. The method has been applied to the analysis of the enantiomeric excess of chiral monomers used for the solid phase synthesis of chiral PNA oligomers. CE chiral analysis showed that a very high enantiomeric purity was generally achieved in the synthesis of all monomers, except for histidine and aspartic acid based monomers in which ca. 10% of the "wrong" enantiomer was always present.     

Enantioseparation of amino acid derivatives by capillary zone electrophoresis using vancomycin as chiral selector

The separation of racemic derivatized amino acids (N-acetyl) into their enantiomers was achieved using capillary zone electrophoresis employing vancomycin as a chiral selector. Due to the strong absorption properties of the chiral selector at the low wavelengths used, the partial-filling countercurrent method was adopted in order to improve method sensitivity. In the separation system studied, the chiral selector filled only a part of the capillary and, due to the appropriate selection of the pH, was moving in the opposite direction of the analytes keeping the detector free from absorbing compounds. The effect of several experimental parameters on the enantioresolution of analytes was studied, e.g., vancomycin concentration (0-5 mM), pH of the background electrolyte (pH 4-7), capillary temperature (15-35 degrees C), and the presence of an organic modifier in the run buffer (methanol or ethanol or n-propanol). N-Acetyl glutamic acid, serine, cystine, tyrosine, and proline were all baseline-resolved into their enantiomers and the enantioresolution factor (R(s)) was increased by raising the vancomycin concentration. pH 4 allowed the baseline resolution of the five studied analytes in the presence of 2.5 mM of chiral selector and an increase in pH caused a decrease of R(s).     

Separation and identification of photodegradation products of benzoic acid by capillary zone electrophoresis

A capillary zone electrophoresis (CZE) method was developed for separation and identification of photodegradation products of benzoic acid under irradiation at a wavelength of 300 nm. Parameters such as run buffer, applied voltage and injection time were optimized for the separation of benzoic acid and its photodegradation products. Linearity, limit of detection, and repeatability of migration time as well as peak area of the method were examined. Four reaction products, including salicylic acid, 3-hydroxybenzoic acid, 4-hydroxybenzoic acid and 3,4-dihydroxybenzoic acid have been separated and identified by spiking the known compounds into the irradiated samples using the CZE method developed. The confirmation of the reaction products is one of the key steps for proposing the possible reaction mechanisms involved in the photodegradation of benzoic acid.