TiO2纳米粒子膜表面性质的研究

ＴｉＯ_２纳米粒子膜在光催化降解大气和水中的污染物［１］、光电转换［２］、光致变色［３］等方面有广阔的应用前景,近年来受到了科学界的高度重视．研究表明,膜的表面性质对如上应用有着重要影响．本文采用等离子体化学气相沉积法（ＰＥＣＶＤ法）［４］制备了ＴｉＯ２的纳米粒子膜,分别采用ＴｉＣｌ４等离子体或Ｏ２等离子体处理膜表面,获得两种不同表面性质的ＴｉＯ２纳米粒子膜;并利用表面光电压谱（ＳＰＳ）和电场诱导表面光电压谱（ＥＦＩＳＰＳ）技术对膜的表面性质进行具体分析,探讨了其在光催化领域的可能应用．１实验部…     

The effect of complexing agent on crystal growth,structure and properties of nanostructured Cu_（2-x）S thin films

Thin films of Cu2 x S（x = 0, 1） were deposited on self-assembled, monolayer modified substrates in the copper–thiosulfate system with various concentrations of ethylene diamine tetraacetic acid（EDTA） at a low temperature of 70 8C. The thin films were characterized by means of X-ray diffraction（XRD）, X-ray photoelectron spectroscope（XPS）, field emission scanning electron microscopy（FESEM）, transmission electron microscopy（TEM）. The optical and photoelectrochemical（PEC） properties of the Cu2 x S semiconductor films were investigated by ultraviolet–visible（UV–vis） absorption spectroscopy and a three-electrode system. It is found that EDTA plays a key role in the process of Cu2 x S nanocrystals formation and growth. The compositions of the Cu2 x S nanocrystals varied from Cu2S（chalcocide） to Cu S（covellite） through adjusting the concentration of EDTA, which is used as a complexing agent to yield high-quality Cu2 x S films. The growth mechanisms of Cu2 x S nanocrystals with different EDTA concentrations are proposed and discussed in detail.     

Preparation and Magnetic Properties of Submicron CrO2 Thin Film on Poly-crystal TiO2 Film

The submicron chromium dioxide(CrO₂) thin film was fabricated on a poly-crystal titania(TiO₂) film using Si wafers as substrates by atmospheric pressure chemical vapor deposition(CVD) method. X-Ray diffraction patterns show that the CrO₂ films were pure rutile structure. Scanning electron microscopy(SEM) images indicate that the CrO₂ films consisted of submicron grains with a grain size of 250―750 nm. The magnetic researches reveal that the magnetic easy axis is parallel to the films, and at room temperature, the CrO₂ films show linear magnetoresistance.     

丁二酸在Ti/TiO2膜电极上的电化学合成

在包含原料马来酸的硫酸溶液中, 通过原位阳极氧化法制备了Ti/TiO2膜电极, 然后采用极性转换技术在原溶液中电化学合成丁二酸. 采用XPS, XRD和SEM分析了膜电极上的元素组成、价态分布和氧化膜的晶相结构及表面形貌. 结果表明, 阳极氧化膜层内只含有Ti和O两种元素, 且Ti均为Ti4+; TiO2氧化膜是金红石相, 表观呈现带孔的条纹形貌. 通过循环伏安、恒电位阶跃和恒电流电解技术研究了Ti/TiO2原位氧化膜电极的电化学性质, 结果表明, 该膜电极对马来酸电还原合成丁二酸具有较好的电催化活性. 以钛基氧化钌电极(DSA)为阳极, Ti/TiO2原位氧化膜电极为阴极进行恒电流电解了实验. 结果表明, 丁二酸的还原产率为95.94%, 电流效率为95.57%, 产物纯度为99.28%, 熔点为185~187 ℃.     

TiO2半导体薄膜的制备与特性

ＴｉＯ_２半导体薄膜的制备与特性徐明霞，徐廷献，刘宁（天津大学材料系天津３０００７２）关键词ＴｉＯ_２，半导体薄膜，制备ＴｉＯ２薄膜或涂层，作为优良的色材、氧敏传感器材料和湿式太阳电池的光电阳极材料具有广阔的应用前景［１～３］．传统制膜技术主要采用物理...     

Preparation and surface properties of the polysiloxane material modified with fluorocarbon side chains

The novel polysiloxane material modified with fluorocarbon side chains was synthesized. FTIR, FNMR were used to characterize the copolymer structure. The emulsion of the modified polysiloxane was prepared. The reflectance spectrum of the dyed polyester fabric treated with the polymer was also discussed. The effect of the modified polysiloxane on the color fastness of the dyed polyester fabric was investigated. The results show that the novel polysiloxane material modified with fluorocarbon side chains had excellent surface activity. It did not affect the shade of color and the fastnesses of the dyed fabrics and could improve the handle of fabrics. The treated fabric with the modified polysiloxane showed excellent repellency to water.     

表面修饰DBS基团对TiO2气相光催化性能的影响

采用溶胶-水热法直接获得表面修饰十二烷基苯磺酸钠(DBS)分子基团的TiO2纳米粒子, 并考察了DBS表面修饰对纳米TiO2光催化氧化降解气相n-C5H12反应的活性和寿命的影响, 并利用表面光电压(SPS)谱和光致发光(PL)光谱等方法研究了DBS表面修饰的影响机制. 结果表明, 表面修饰DBS分子基团能够抑制TiO2纳米微晶生长, 促进纳米TiO2分散, 增强吸附性和提高光生电荷分离, 使光催化活性显著提高. 但寿命并未下降, 这与TiO2和DBS基团的光稳定性有关. 动力学研究结果表明, TiO2光催化氧化n-C5H12反应遵循Langmuir-Hinshelwood动力学模型, 为准一级反应.     

纳米尺度TiO2微粒多孔膜电极光电化学

用光电流作用谱、光电流-电势图和瞬态光电流谱等光电化学方法研究了TiO2多孔膜电极在含不同氧化还原体系的电解质溶液中的光电转换过程.结果说明TiO2多孔股为n-型半导体，其禁带宽度为3.26eV.当在电解质溶液中加入醌二苯酸（BQ／HQ），TiO2多孔膜电极的光电流作用谱形基本与没加氧化还原对时类似。在可见光区的光电流拖尾是由于醌被光激发，然后给出电子到TiO2多孔膜导带而产生阳极光电流.而在电解质溶液中加入Fe（CN）3-6-／4-时，TiO2多孔膜电极的光电流作用谱有明显的改变.除了在小于380nm短波区有光电流峰外，还在400-600nm的可见光区观察到宽的光电流峰，大大增加了光电流转换效率.同时在小于-0.2V下为阳极光电流，在-0.2V～0.3V电势区间为明显阴极光电流，在大于0.3V下可观察到较弱的阳极光电流.当电极电势大于-0.2V时，光电流瞬态谱在开始光照时有一阴极瞬态光电流尖峰，然后转变为阳极稳态光电流.这是因为当电极电势较负时，Fe（CN）4-6与TiO2的电子传递络合物可以吸收光子，光生电子迅速注入TiO2导带，然后还原溶液中的而产生阴极光电流.     

TiO2修饰的镍基光电极的制备及光电化学性能

通过溶胶 凝胶法，直接在导电的金属镍基上制备多孔TiO2纳米薄膜，利用STM观察电极的表面形貌，所制TiO2粒径约为20～80 nm，随着烧结温度的升高，TiO2纳米薄膜表面孔的数量增多、孔径增大.用循环伏安法分析了电极的光电化学性能，结果表明，电极的光电响应随烧结温度的升高和薄膜厚度的增加而增大.     

Simple and Effective Method to Prepare Microfiber Reinforced Nanofiber Film with Significant Improvement of Mechanical Properties

Microfiber reinforced nanofiber films were prepared with the help of two nozzles technology.We designed a new device via placing two nozzles on the opposite sides of a rolling cylinder,with a piece of thin insulation board with a certain size of hole in the middle part installed to accommodate the cylinder so as to form two entirely independent electric fields.Playing the role of support,microfiber may be favorable for enhancing the mechanic performance of the nanofiber.Compared with that of single nanofiber,the tensile strength of the composite micro/nanofiber prepared by this method has been increased by a factor of 4.5.After the further improvement of the fiber orientation,the tensile strength is 7.96 times that of non-oriented composite micro/nanofibers film,30 times that of the single nanofiber film.     

嵌段共聚物组成对薄膜形貌影响的多体耗散粒子动力学研究

利用多体耗散粒子动力学(Multibody Dissipative Particle Dynamics, Multibody DPD)方法研究了在溶剂蒸发条件下, 嵌段共聚物在表面自组装形成薄膜的过程, 分别考虑了两嵌段共聚物和三嵌段共聚物及不同组成对薄膜形貌的影响. 模拟得到了无序状薄膜和层状薄膜, 并计算了这些薄膜的序参量和薄膜厚度随时间的演化. 结果表明, 嵌段共聚物的组成对薄膜厚度几乎没有影响, 当某种组分的链段很短时, 只能形成序参量较小的无序薄膜, 相反, 则可以得到序参量较大的层状薄膜.     

纳米尺度TiO2／聚吡咯多孔膜电极光电化学研究

用光电流作用谱，光电流－电势图和ＵＶ－Ｖｉｓ光说研究了ＴｉＯ２／聚吡咯多孔膜电极在不含氧化还原对和含不同氧化还原体系电解质溶液中的光电转换过程。ＴｉＯ２／聚吡咯多孔膜电极双层ｎ型半导体结构，内层ＴｉＯ２多孔膜的禁带宽度为３．２６ｅＶ，外层聚吡咯膜的禁带宽度为２．２ｅＶ。     

Preparation and Photocatalytic Property of Porous TiO_2 Film with Net-like Framework

By the UV-curing method, a porous TiO2 film with net-like framework has been prepared. The characte-rization results of the porous TiO2 film by means of SEM, TEM, XRD, and N2 adsorption-desorption analysis show that the net-like framework of the porous TiO2 film is composed of TiO2 nanoparticles, forming three dimensional porous structure. The porous TiO2 film exhibits higher photocatalytic activity for the degradation of methylene blue(MB) dye compared with the conventional dense TiO2 film.     

海绵状纳米结构TiO2膜的制备及其光催化活性

采用电化学阳极氧化法在钛表面构筑了海绵状纳米结构TiO2膜. 应用扫描电子显微镜(SEM)和X射线衍射(XRD)对膜层的形貌和晶型进行了分析和表征, 考察了阳极氧化时间对膜层厚度的影响, 并通过海绵状纳米结构TiO2膜对甲基橙的光催化降解研究了膜层厚度与光催化活性的关系. 结果表明, 海绵状纳米结构TiO2膜对甲基橙具有光催化降解作用, 而且随着膜层厚度的增加, 光催化降解速率显著增大, 厚度为2.2 μm的海绵状纳米结构TiO2膜对甲基橙的光催化降解速率是厚度为480 nm的6.4倍.     

TiO2纳米晶多孔膜的电荷传输特性

用光电流作用谱、瞬态光电流、循环伏安及线性电位扫描法研究了TiO2纳米晶／纳米多孔膜电荷传输特性．结果表明TiO2纳米多孔膜的电荷传输与块体半导体不同．TiO2纳米晶电极的能带不弯曲，电子在导带中可向两个方向流动，电子既可以流向电极内部经由外电路输出．也可以流向电解质溶液被溶液中的受主捕获．在TiO2纳米多孔膜电极中，不仅在负电位区能带边随电位变化，而且在正电位区能带边随电位变化而移动，即带边不钉扎。加入合适的施主可提高光电转换效率．加入受主则在电极溶液界面引起电子的严重损失，降低光电转换效率．     

Thermal and Mechanical Properties of Isotactic Polypropylene/TiO_2 Particulate Composites

It has been recently demonstrated that titanium dioxide possesses photocatalyticaction in the decomposition of ethylene to carbon dioxide and water in the presence ofatmospheric oxygen[1～ 3] . Ti O2 ,a largely produced substance exploited in manyindustrial sectors,is used as an additive in cosmetics and even in some food,because ofits very low toxicity level. Furthermore,Ti O2 shows absorption properties that canavoid water condensation on the interior surface of packages in the presence of …     

非溶剂诱导聚苯乙烯超薄膜去润湿过程中不同有序表面形貌的形成

利用原子力显微镜研究了带有自然氧化层硅基底上聚苯乙烯薄膜在不同非溶剂诱导下的去润湿过程.研究发现,非溶剂是通过渗透取代机理诱导高分子薄膜发生去润湿.薄膜的形貌取决于成孔过程与孔增长过程的相对速度.当聚苯乙烯(PS)薄膜厚度为15 nm时,随着溶剂烷基链的增长,成孔数显著降低;然而孔开始合并时孔径明显地增加.当PS薄膜厚度增加到25 nm时,随着溶剂烷基链的增长,成孔数略有降低,薄膜形貌形成长程有序的双连续的结构.当PS膜厚为35 nm时,与其它2个膜厚相比,成孔数大幅下降.此外,温度和分子量能进一步降低去润湿过程中的成孔数,从而形成分形结构形貌.     

黑膜厚度与膜表面张力关系的研究

用微干涉测量技术直接测定楔压等温线,研究了电解质浓度对阳离子表面活性剂TTAB在浓度大于cmc时形成黑膜厚度的影响及膜表面张力与溶液表面张力之间的差别.结果显示,黑膜厚度取决于楔压和电解质浓度,随着楔压的增加,液膜厚度减少至一定程度后几乎保持不变,表明黑膜类型的转化是阶跃式的,而电解质屏蔽了液膜两个表面电荷层间的排斥作用,故电解质浓度增加,液膜厚度变小.由楔压等温线得出的膜表面张力的结果说明一般黑膜的表面张力与溶液的表面张力并无明显差别.     

氮掺杂二氧化钛-氧化镍双层薄膜的光电致色特性

以金属钛为靶材、O2/N2/Ar混合气氛为溅射气体,在导电玻璃(ITO)表面磁控溅射一层薄膜,再经300-500℃退火处理制备了氮掺杂TiO2薄膜.采用X射线衍射(XRD)、X光电子能谱(XPS)、扫描电子显微镜(SEM)和紫外-可见吸收光谱等对薄膜的微观结构、光学特性和光电化学性能等进行了研究.进而采用化学沉积的方法在TiO2-xNx薄膜表面沉积上一层多孔NiO薄膜,研究表明,制备的ITO/TiO2-xNx/NiO双层薄膜具有明显的光电致色特性,400℃退火处理的氮掺杂TiO2薄膜具有最高的光电流响应,经氙灯照射1h后,薄膜从无色变成棕色,500nm波长处光透过率从79.0%下降至12.6%.     

水解钛醇盐制备TiO2膜及其光敏染料的相互作用

A method of preparation of stable, homogeneous and controlled thickness TiO2 film through hydrolysis of Ti(OC4H9)4 is introduced in detail. The structure and property of the film have been investigated by means of SEM and FT-IR techniques. The strong quenching effect between sensitizing dyes and TiO2 film is observed in their fluorescence spectra.