计算机自动结构解析专家系统研究——ESESOC-Ⅱ结构产生器

ESESOC-Ⅱ是一个用于含O,N,P,S及卤素等多种杂原子的有机化合物结构自动解析专家系统.它由3个部分组成:数据分析,结构产生器,结构验证。结构产生器是系统的核心部分,它从分子出发,穷举生成结构基元集和结构片断集,最后对接成穷举的、非冗余候选结构。文中详细介绍了结构产生器的结构生成算法。     

化学家怎样创制新药

本文概述从化学的角度出发,以什么为根据,逐步探索新药创制的过程。     

闭孔泡沫塑料结构与性能研究进展

综述了近年来对闭孔泡沫塑料,主要是发泡聚烯烃的结构与性能关系研究的进展。总结了有关泡沫塑料的常见结构模型以及性能结构关系的解析式表达,并介绍了常见表征泡沫塑料结构、性能的方法以及近年来出现的新的表征手段。文章讨论了近年来研究塑料泡沫结构与性能尤其是力学性能之间关系的新结果、新进展,并对研究进行了展望。     

药物递送中的高分子原理

药物递送正在逐渐成熟为一门工程科学,主要根据药理学的要求,利用材料科学的基本原理来进行递送体系设计和研究.高分子是药用材料的主要类别,本文以药物一高分子固体分散体和高分子药物为例,讨论了高分子科学中的基本原理,尤其是结构与性能关系,是如何在药物递送研究和设计中得以体现的.另一方面,药物递送领域的发展也对高分子科学提出了...     

系列新型大孔径分子筛骨架结构设计

本文提出三种包含有五员环的新型(准)笼结构单元 ,并基于这些新型的二级结构单元 ,应用“二级结构 空间群组合法”辅以Σ变换设计了MIR系列属于正交晶系Ibam空间群含有16、20、24、28员环主孔道的大孔径新型沸石骨架拓扑结构。估设了这些新型分子筛结构的晶胞常数以及骨架T位原子及氧原子的坐标参数。然后通过能量最小化 ,确定它们稳定构象的全部晶体结构设计细节以及相应的生成热 ;进而讨论了这些结构的稳定性。通过对比、分析不同结构的生成热 ,得到分子筛骨架结构中插入六棱柱笼会使其生成热降低而使结构更趋稳定的推断。     

阵列凹坑结构分布与水滴黏附性质的关系

以新鲜玫瑰花花瓣正面为模板, 采用模板印刷法制备具有微米级阵列凹坑和纳米级沟壑结构的聚二甲基硅氧烷(PDMS)薄膜, 通过对该薄膜逐级拉伸改变其微观结构的分布; 采用场发射扫描电子显微镜(SEM)和原子力显微镜(AFM)观察了不同拉伸程度下薄膜表面微观结构的变化, 采用高敏感性微电力学天平测试了样品表面微观结构变化过程中水滴的黏附力, 分析了其微观结构分布与水滴黏附性质的关系; 采用接触角测量仪表征不同拉伸条件下薄膜的浸润性. 结果表明, 随着PDMS薄膜被逐次拉伸, 单位面积内的凹坑结构数目减少, 且凹坑逐渐分离, 凹坑的深度逐渐降低, 水滴更容易浸入到凹坑结构中, 因此水滴与薄膜的黏附力急剧增大; 随着薄膜进一步拉伸, 纳米级沟壑结构会随着凹坑的拉伸而不断伸展, 纳米级沟壑结构的面积增加, 纳米沟壑结构诱捕的空气量逐渐上升, 导致水滴与薄膜表面的接触面积降低, 使得水滴与薄膜的黏附力下降; 继续拉伸PDMS薄膜, 纳米级沟壑结构进一步伸展, 水滴逐渐浸入纳米级沟壑结构中, 水滴与薄膜的黏附力缓慢增大, 当水滴完全进入到纳米级沟壑中时, 水滴与薄膜的黏附力达到极大值, 此时继续拉伸PDMS薄膜, 纳米级沟壑结构随着拉伸程度的增加继续伸展, 水滴与薄膜的接触面积稍有减少, 黏附力将有所下降, 直至薄膜被完全破坏. 由此可见, 微米级凹坑结构和纳米级褶皱结构的分布是影响PDMS薄膜对水滴黏附性质的主要因素.     

计算机辅助有机化合物结构解析ESESOC-Ⅱ

简要介绍了有机化合物结构自动解析专家系统ＥＳＥＳＯＣ－Ⅱ及其结构产生器由分子式穷举生成有机化合物结构异构体的基本算法。主要讨论了结构产生器的穷举性、非冗性和有效性问题。     

增加广博知识提高科学素养--开设选修课"色彩与物质结构"

讲述选修课“色彩与物质结构”开设的目的、内容与措施、主要特色以及取得的效果.本课程不仅对提高结构化学的教学效果十分有效,而且对师范生拓宽知识面,提高科学素养,起到了非常好的促进作用.     

Cu_2O@HKUST-1前驱物法合成CuO中空管状超级结构及其CO催化氧化性能

以Cu_2O@HKUST-1(HKUST-1=Cu_3(BTC)2,BTC~(3-)=均苯三甲酸离子)线状核@壳结构为前驱体,通过在碱性条件下原位水解HKUST-1壳、氧化刻蚀Cu_2O核的方法得到了一种新型的、由相互交错的CuO纳米片构筑的、中空管状的超级结构,并研究了其对CO氧化的催化活性。结果表明,这种中空的CuO管状超级结构具有较大的比表面积(56.3 m~2/g)和可观的催化活性,催化剂对CO的完全转化温度为200℃,190℃时转化效率为17.3 mmolCO/(gCuO·h)。     

Cu2+改性g-C3N4光催化剂的光催化性能

Photocatalytic technology can effectively solve the problem of increasingly serious water pollution, the core of which is the design and synthesis of highly efficient photocatalytic materials. Semiconductor photocatalysts are currently the most widely used photocatalysts. Among these is graphitic carbon nitride (g-C₃N₄), which has great potential in environment management and the development of new energy owing to its low cost, easy availability, unique band structure, and good thermal stability. However, the photocatalytic activity of g-C₃N₄ remains low because of problems such as wide bandgap, weakly absorb visible light, and the high recombination rate of photogenerated carriers. Among various modification strategies, doping modification is an effective and simple method used to improve the photocatalytic performance of materials. In this work, Cu/g-C₃N₄ photocatalysts were successfully prepared by incorporating Cu²⁺ into g-C₃N₄ to further optimize photocatalytic performance. At the same time, the structure, morphology, and optical and photoelectric properties of Cu/g-C₃N₄ photocatalysts were analyzed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy, UV-Vis diffuse reflectance spectroscopy (DRS), and photoelectric tests. XRD and XPS were used to ensure that the prepared photocatalysts were Cu/g-C₃N₄ and the valence state of Cu was in the form of Cu²⁺. Under visible light irradiation, the photocatalytic activity of Cu/g-C₃N₄ and pure g-C₃N₄ photocatalysts were investigated in terms of the degradation of RhB and CIP by comparing the amount of introduced copper ions. The experimental results showed that the degradation ability of Cu/g-C₃N₄ photocatalysts was stronger than that of pure g-C₃N₄. The N₂ adsorption-desorption isotherms of g-C₃N₄ and Cu/g-C₃N₄ demonstrated that the introduction of copper had little effect on the microstructure of g-C₃N₄. The small difference in specific surface area indicates that the enhanced photocatalytic activity may be attributed to the effective separation of photogenerated carriers. Therefore, the enhanced photocatalytic degradation of RhB and CIP over Cu/g-C₃N₄ may be due to the reduction of carrier recombination rate by copper. The photoelectric test showed that the incorporation of Cu²⁺ into g-C₃N₄ could reduce the electron-hole recombination rate of g-C₃N₄ and accelerate the separation of electron-hole pairs, thus enhancing the photocatalytic activity of Cu/g-C₃N₄. Free radical trapping experiments and electron spin resonance indicated that the synergistic effect of superoxide radicals (O₂^•−), hydroxyl radicals (•OH) and holes could increase the photocatalytic activity of Cu/g-C₃N₄ materials.     

g-C_3N_4/BiOBr异质结光催化剂的制备与可见光催化活性

以三聚氰胺作为合成g-C_3N_4纳米片的前躯体,以Bi(NO3)3·5H2O和KBr作为合成BiOBr的原料,采用水热法构建g-C_3N_4/Bi OBr二维异质结可见光催化剂,有效的晶面复合和合适的能带组合有助于增强g-C_3N_4和BiOBr的可见光催化活性。利用X射线衍射(XRD)、透射电镜(TEM)、X射线光电子能谱(XPS)、光致发光光谱(PL)和紫外-可见漫反射光谱(UVvis DRS)等方法表征其结构、光学性质以及组成结构。在可见光(λ420 nm)下以光催化降解RhB来评价合成催化剂的光催化活性,结果表明,g-C_3N_4/BiOBr光催化降解罗丹明B(Rh B)的效率高于单体g-C_3N_4和BiOBr,并对g-C_3N_4/BiOBr增强可见光催化RhB机理进行解释。     

原位聚合碳掺杂改性石墨态氮化碳光催化活性研究

本文通过在双氰胺前驱体中添加聚乙二醇,在缩聚过程实现碳掺杂形成含氮空位的g-C₃N₄光催化剂。通过X射线衍射(XRD)、红外光谱(FTIR)、光电子能谱(XPS)、紫外-可见吸收光谱(UV-Vis)和荧光谱(FL)等表征手段,考察了原位聚合碳掺杂形成氮空位对g-C₃N₄物相结构、组分与化学态、光吸收性能及光催化活性的影响。研究结果表明,采用该方法可实现原位聚合碳掺杂,有效拓展g-C₃N₄的可见光吸收至850 nm,在紫外-可见光与可见光照射下光降解RhB及光催化产氢性能均显著提高,尤其可见光条件下的性能提升更为显著。     

具有高效界面电荷转移的0D/2D Bi4V2O11/g-C3N4梯形异质结的设计合成及抗生素降解性能研究

随着工业技术的飞速发展,大量有机污染物被应用于生活的各个领域,由此带来了严重的环境问题。众所周知,半导体光催化技术是一种有效且环境友好的降解去除典型污染物的方法,而光催化剂在该技术的应用中起着关键作用。因此,在光催化污染物降解领域,人们已经尝试研究了各种半导体材料。其中石墨相氮化碳(g-C₃N₄)是近年来公认的“明星”材料之一。因其独特的二维层状结构和良好的可见光响应而引起了人们的极大兴趣。由于带隙较窄(~2.7 eV)、能带结构可调以及良好的物理化学稳定性,g-C₃N₄对太阳光谱的吸收可达450 nm,具有一定的可见光光催化性能。然而,g-C₃N₄在去除抗生素和染料方面的降解效率仍然存在不足,例如光生电荷的快速复合以及空穴的氧化能力弱等。为了优化这种有前景的光催化材料,人们尝试了多种方法来改善g-C₃N₄的电子能带结构,例如金属/非金属元素掺杂、形貌调控和官能团修饰等。最近,人们提出了由两种N型半导体光催化剂组成的梯形异质结理念,它可以利用半导体材料更正的价带和更负的导带。相关结果表明,构筑梯形异质结是提高g-C₃N₄光催化活性的最有效方法之一。因此,本文通过简单的原位溶剂热生长法制备了新型0D/2D Bi₄V₂O₁₁/g-C₃N₄梯形异质结光催化剂。Bi₄V₂O₁₁/g-C₃N₄复合材料对去除土霉素(OTC)和活性红染料展示出了优异的光催化活性。尤其是BVCN-50复合材料对OTC和活性红的降解效率高达74.1%和84.2%,该过程的主要活性物种为·O₂^-。大幅增强的光催化性能归因于Bi₄V₂O₁₁和g-C₃N₄之间形成的梯形异质结保持了光催化体系的强氧化还原能力(Bi₄V₂O₁₁的强氧化能力和g-C₃N₄的强还原能力),并促进了光生电荷的空间分离。此外,金属Bi⁰的表面等离子共振效应可以拓宽异质结系统的光吸收范围。此外,基于高效液相色谱-质谱联用(LC-MS)分析,我们研究了OTC降解过程中可能的中间体和降解路径。这项工作为设计和制备g-C₃N₄基梯形异质结用于抗生素和活性染料降解提供了一种新的策略。     

金属相1T´ MoS2增强类石墨相C3N4的可见光催化性能

通过煅烧和静电自组装的方法制备了1T′ MoS₂超薄纳米片和类石墨烯相氮化碳(g-C₃N₄)纳米片的复合材料. 该材料在光催化实验中展现出6.24 μmol?g^?1?h^?1的产氢速率, 优于贵金属铂修饰的g-C₃N₄纳米片的性能(4.64 μmol?g^?1?h^?1). 此外, 该复合材料在光催化降解有机染料甲基橙的实验中表现出0.19 min^?1的催化速率, 而纯g-C₃N₄纳米片只有0.053 min^?1的催化速率. 材料光催化性能的提升可归结于1T′MoS₂ 和g-C₃N₄之间的协同效应, 包括光吸收的增强以及因1T′MoS₂优异电子导电性而得到的高效电荷分离.     

Enhanced Visible-light Photocatalytic Activity of g-C3N4/Nitrogen-doped Graphene Quantum Dots/TiO2 Ternary Heterojunctions for Ciprofloxacin Degradation with Narrow Band Gap and High Charge Carrier Mobility

Limited visible-light absorption and high recombination rate of photogenerated charges are two main drawbacks in g-C₃N₄-based photocatalysts. To solve these problems, g-C₃N₄/nitrogen-doped graphene quantum dots (NGQDs)/TiO₂ ternary heterojunctions were facilely prepared via a one-step calcining method. The morphology, structure, optical and electrochemical properties of g-C₃N₄/NGQDs/TiO₂ were characterized and explored. The optimal g-C₃N₄/NGQDs/TiO₂ composite exhibits enhanced photocatalytic degradation performance of ciprofloxacin (CIP) compared with the as-prepared g-C₃N₄, TiO₂(P25) and g-C₃N₄/TiO₂ heterojunction under visible light irradiation. The apparent rate constant of the composite is around 6.43, 4.03 and 2.30 times higher than those of g-C₃N₄, TiO₂ and g-C₃N₄/TiO₂, respectively. The enhanced photocatalytic efficiency should be mainly attributed to the improvement of light absorption and charge separation and transfer efficiency, originating from the narrow band gap and high charge carrier mobility. The active species trapping experiments results showed that the h⁺ and ^·O₂^- were the main active species in the degradation process. A possible photocatalytic reaction mechanism of the g-C₃N₄/NGQDs/TiO₂ composite for the enhanced degradation of CIP under visible light irradiation was also proposed.     

缺陷工程调控石墨相氮化碳及其光催化空气净化应用进展

Since the pioneering work on polychlorinated biphenyl photodegradation by Carey in 1976, photocatalytic technology has emerged as a promising and sustainable strategy to overcome the significant challenges posed by energy crisis and environmental pollution. In photocatalysis, sunlight, which is an inexhaustible source of energy, is utilized to generate strongly active species on the surface of the photocatalyst for triggering photo-redox reactions toward the successful removal of environmental pollutants, or for water splitting. The photocatalytic performance is related to the photoabsorption, photoinduced carrier separation, and redox ability of the semiconductor employed as the photocatalyst. Apart from traditional and noble metal oxide semiconductors such as P25, bismuth-based compounds, and Pt-based compounds, 2D g-C₃N₄ is now identified to have enormous potential in photocatalysis owing to the special π-π conjugated bond in its structure. However, some inherent drawbacks of the conventional g-C₃N₄, including the insufficient visible-light absorption ability, fast recombination of photogenerated electron-hole pairs, and low quantum efficiency, decrease its photocatalytic activity and limit its application. To date, various strategies such as heterojunction fabrication, special morphology design, and element doping have been adopted to tune the physicochemical properties of g-C₃N₄. Recent studies have highlighted the potential of defect engineering for boosting the light harvesting, charge separation, and adsorption efficiency of g-C₃N₄ by tailoring the local surface microstructure, electronic structure, and carrier concentration. In this review, we summarize cutting-edge achievements related to g-C₃N₄ modified with classified non-external-caused defects (carbon vacancies, nitrogen vacancies, etc.) and external-caused defects (doping and functionalization) for optimizing the photocatalytic performance in water splitting, removal of contaminants in the gas phase and wastewater, nitrogen fixation, etc. The distinctive roles of various defects in the g-C₃N₄ skeleton in the photocatalytic process are also summarized. Moreover, the practical application of 2D g-C₃N₄ in air pollution control is highlighted. Finally, the ongoing challenges and perspectives of defective g-C₃N₄ are presented. The overarching aim of this article is to provide a useful scaffold for future research and application studies on defect-modulated g-C₃N₄.      

Synthesis of Z-scheme g-C3N4 nanosheets/Ag3PO4 photocatalysts with enhanced visible-light photocatalytic performance for the degradation of tetracycline and dye

Graphene-like C3N4/Ag3PO4 photocatalysts are synthesized by calcination and solutions precipitating method.The obtained g-C3N4/Ag3PO4 composites display excellent photocatalytic activity for the degradation of methylene orange(MO),rhodamine B(RhB)and tetracycline(TC)under visible light irradiation.The solutions containing RhB(10 mg/L)and MO(10 mg/L)can be efficiently degraded within15 min and 30 min.Especially,nearly 80%of TC(50 mg/L)is degraded within 20 min.which are much better than those of pure g-C3N4 nanosheets and Ag3PO4,implying that strong interaction and reasonable energy band alignment in the contact interface can effectively transfer the carries.Furthermore,the g-C3N4/Ag3PO4 composites exhibit the improved stability,and only a slight decrease is observed after three recycling runs.Moreover,the impact of inorganic ions and PH values on the degradation performance is rather small.The Z-scheme photocatalytic mechanism of the g-C3N4/Ag3PO4 composites based on the active species trapping experimental is proposed.This work demonstrates the promising applications of the g-C3N4/Ag3PO4 composites in environmental issues.     

反蛋白石结构的g-C3N4可控合成及其优异的光催化产氢性能

The growing frustration from facing energy shortages and unbalanced environmental issues has obstructed the long-term development of human society. Semiconductor-based photocatalysis, such as water splitting, transfers solar energy to storable chemical energy and is widely considered an economic and clean solution. Although regarded as a promising photocatalyst, the low specific surface area of g-C₃N₄ crucially restrains its photocatalytic performance. The macro-mesoporous architecture provides effective channels for mass transfer and full-light utilization and improved the efficiency of the photocatalytic reaction. Herein, g-C₃N₄ with an inverse opal (IO) structure was rationally fabricated using a well-packed SiO₂ template, which displayed an ultrahigh surface area (450.2 m²·g^-1) and exhibited a higher photocatalytic H₂ evolution rate (21.22 μmol·h^-1), almost six times higher than that of bulk g-C₃N₄ (3.65 μmol·h^-1). The IO g-C₃N₄ demonstrates better light absorption capacity than bulk g-C₃N₄, primarily in the visible spectra range, owing to the multiple light scattering effect of the three-dimensional (3D) porous structure. Meanwhile, a lower PL intensity, longer emission lifetime, smaller Nyquist semicircle, and stronger photocurrent response (which synergistically give rise to the suppressed recombination of charge carriers) decrease the interfacial charge transfer resistance and boost the formation of photogenerated electron-hole pairs. Moreover, the existing N vacancies intensify the local electron density, helping increase the number of photoexcitons. The N₂ adsorption-desorption test revealed the existence of ample mesopores and macropores and high specific surface area in IO g-C₃N₄, which exposes more active edges and catalytic sites. Optical behavior, electron paramagnetic resonance, and electrochemical characterization results revealed positive factors, including enhanced light utilization, improved photogenerated charge separation, prolonged lifetime, and fortified IO g-C₃N₄ with excellent photocatalytic performance. This work provides an important contribution to the structural design and property modulation of photocatalysts.      

g-C3N4表面改性及其光催化制H2与CO2还原研究进展

Solar energy is the largest renewable energy source in the world and the primary energy source of wind energy, tidal energy, biomass energy, and fossil fuel. Photocatalysis technology is a sunlight-driven chemical reaction process on the surface of photocatalysts that can generate H₂ from water, decompose organic contaminants, and reduce CO₂ into organic fuels. As a metal-free polymeric material, graphite-like carbon nitride (g-C₃N₄) has attracted significant attention because of its special band structure, easy fabrication, and low costs. However, some bottlenecks still limit its photocatalytic performance. To date, numerous strategies have been employed to optimize the photoelectric properties of g-C₃N₄, such as element doping, functional group modification, and construction of heterojunctions. Remarkably, these modification strategies are strongly associated with the surface behavior of g-C₃N₄, which plays a key role in efficient photocatalytic performance. In this review, we endeavor to provide a comprehensive summary of g-C₃N₄-based photocatalysts prepared through typical surface modification strategies (surface functionalization and construction of heterojunctions) and elaborate their special light-excitation and response mechanism, photo-generated carrier transfer route, and surface catalytic reaction in detail under visible-light irradiation. Moreover, the potential applications of the surface-modified g-C₃N₄-based photocatalysts for photocatalytic H₂ generation and reduction of CO₂ into fuels are summarized. Finally, based on the current research, the key challenges that should be further studied and overcome are highlighted. The following are the objectives that future studies need to focus on: (1) Although considerable effort has been made to develop a surface modification strategy for g-C₃N₄, its photocatalytic efficiency is still too low to meet industrial application standards. The currently obtained solar-to‑hydrogen (STH) conversion efficiency of g-C₃N₄ for H₂ generation is approximately 2%, which is considerably lower than the commercial standards of 10%. Thus, the regulation of the surface/textural properties and electronic band structure of g-C₃N₄ should be further elucidated to improve its photocatalytic performance. (2) Significant challenges remain in the design and construction of g-C₃N₄-based S-scheme heterojunction photocatalysts by facile, low-cost, and reliable methods. To overcome the limitations of conventional heterojunctions thoroughly, a promising S-scheme heterojunction photocatalytic system was recently reported. The study further clarifies the charge transfer route and mechanism during the catalytic process. Thus, the rational design and synthesis of g-C₃N₄-based S-scheme heterojunctions will attract extensive scientific interest in the next few years in this field. (3) First-principle calculation is an effective strategy to study the optical, electrical, magnetic, and other physicochemical properties of surface strategy modified g-C₃N₄, providing important information to reveal the charge transfer path and intrinsic catalytic mechanism. As a result, density functional theory (DFT) computation will be paid increasing attention and widely applied in surface-modified g-C₃N₄-based photocatalysts.