银纳米粒子表面油酸盐吸附的分子模拟

采用分子力学方法模拟了油酸盐分子在银纳米粒子(111)表面的两种主要吸附形态: 双键吸附和羧基吸附, 计算了不同溶剂环境中油酸盐分子的吸附能和振动频率. 结果表明: 作为银纳米粒子保护剂的油酸盐能够稳定地存在于极性和非极性溶剂环境中, 与银表面的作用方式随溶剂极性的改变而改变, 水相中以双键吸附为主, 而在有机相中主要是羧基吸附. 这与红外光谱实验的推论基本吻合. 从而在分子水平上为实验结果提供了有价值的理论支持和微观信息.     

柔性金属-有机骨架材料中甲醇吸附和扩散的分子模拟

采用分子力学和分子动力学相结合的方法, 对甲醇在Ni₂(4,4'-bipyridine)₃(NO₃)₄中的吸附能和扩散势垒进行了研究. 结果表明, 每个Ni₂(4,4'-bipyridine)₃(NO₃)₄结构单元的饱和吸附量是4个甲醇分子, 稳定吸附分子个数是2个, 吸附多于2个甲醇分子时材料结构变形明显, 是甲醇实验吸附等温线出现梯级现象的原因, 计算的扩散势垒是35.94 kJ•mol^－1, 与实验值符合较好. 得出, 结构变形对吸附分子在柔性金属-有机骨架中的吸附和扩散性质有重要影响.     

甲醇在FeS2(100)完整表面的吸附和分解

采用基于第一性原理的密度泛函理论结合周期平板模型方法, 研究了甲醇分子在FeS₂(100)完整表面的吸附与解离. 通过比较不同吸附位置的吸附能和构型参数发现: 表面Fe位为有利吸附位, 甲醇分子通过氧原子吸附在表面Fe位, 吸附后甲醇分子中的C―O键和O―H键都有伸长, 振动频率发生红移; 甲醇分子易于解离成甲氧基CH3O和H, 表面Fe位仍然是二者有利吸附位. 通过计算得出甲醇在FeS₂(100)表面解离吸附的可能机理: 甲醇分子首先发生O―H键的断裂, 生成甲氧基中间体, 继而甲氧基C―H键断裂, 得到最后产物HCHO和H₂.     

甲醇-正己烷和甲醇-环己烷溶液构型的分子模拟

用Ｍｏｎｔｅ Ｃａｒｌｏ分子模拟方法研究了不同温度条件下甲醇－正已烷、甲醇－环已烷溶液体系微观结构的变化情况。模拟表明，无论是甲醇－正已烷体系，还是甲醇－环已体系，在其溶液的近临界区，甲醇周围溶剂介质的密度最小，而甲醇分子之间的积聚最为明显。通过对氢健分析的结果表明，在溶液临界区，氢键作用与非氢键作用的距离不可区分。     

H2分子在碱金属掺杂碳纳米管上的吸附特性

采用密度泛函理论研究了H₂在碱金属(M=Li, K)掺杂的扶手椅型单壁碳纳米管上的吸附. 对于碱金属管内掺杂, 模拟了4种氢吸附构型; 对于管外掺杂, 考虑了两种吸附结构, 同时还考虑了两种不同的掺杂浓度. 所有吸附模型都进行了全优化. 计算结果表明, 碱金属掺杂后, 碱金属与碳纳米管之间发生电子授受作用使得碱金属带正电荷, 对于金属Li, 管内掺杂更有利于电子向碳纳米管转移; 与管内掺杂相比, Li原子的管外掺杂更有利于H2分子吸附. 碱金属管外掺杂的碳纳米管吸附H₂的最稳定结构, 存在碱金属原子与H₂分子的配位作用.     

Sr,Ca掺杂对铝酸盐蓝色荧光粉性能的影响

采用高温固相反应法制备了掺杂Sr,Ca的碱土金属铝酸盐蓝色荧光粉。通过测试发现粉样的发光强度与热稳定性均有了较大提高。这与Sr,Ca取代BaMgAl10O17:Eu^2 中的部分Ba后晶体结构变化有关。掺杂少量的Sr,Ca后,所得荧光粉的晶格参数c变小,晶胞体积也随之变小。因此减小了对发光有害的缺陷浓度,并增加了粉样的热稳定性能。     

甲醇在SnO2(110)表面的吸附与解离的理论研究

研究气体分子在固体表面吸附过程的化学和物理性质在气体传感器研究方面有着重要的意义,尤其是一些小分子与氧化物的作用受到人们广泛的关注.SnO2具有特殊的表面性质,是适合用于催化有机物的光催化剂,同时由于SnO2在易燃易爆危险气体和有机物的检测等方面有着特殊而广阔的应用前景,成为化学工作者研究的热点[1-3].     

甲醇在Au(111)表面吸附的密度泛函研究

 采用基于第一性原理的密度泛函理论和周期平板模型相结合的方法,对CH3OH分子在Au(111)表面top, fcc, hcp和bridge位的吸附模型进行了构型优化、能量计算以及Mulliken布居分析,结果表明top位是较有利的吸附位. 吸附的CH3OH解离产生甲氧基CH3O和H, 对它们在Au(111)面的吸附进行的计算表明, bridge和fcc位分别是二者的最佳吸附位. 对过渡态的计算给出了CH3OH在Au表面解离吸附的可能机理: 首先发生 O-H 键的断裂,继而生成甲氧基中间体.     

分子模拟研究微孔材料对光气吸附扩散性能的影响及材料筛选

利用分子模拟的方法研究了微量光气(COCl₂)在微孔材料中的吸附和扩散性能, 并分析了材料结构的影响. 结果表明, 光气在金属有机框架材料(MOF)和共价有机框架材料(COF)中的吸附等温线主要表现为第Ⅰ类型和第Ⅴ类型吸附. 当光气压力较低时, COF材料和含有开放金属位点的材料对其吸附性能较好. 通过对不同压力下吸附量的比较发现, 吸附达到饱和前, 随着压力和孔隙率(VF)的升高, 材料对光气的吸附量增大. 通过分子动力学模拟研究光气在微孔材料中的扩散性能发现, 较强吸附位点的存在不利于光气在孔道中的扩散. 通过气体分子在材料中的径向函数分布图及模拟轨迹分析发现, 分子协同效应和空间位阻效应相互竞争决定了扩散速率的快慢. 综合评价材料的吸附和扩散性能发现, COF-102, COF-300, ZnMOF-74, Zn-DOBDC和PCN-60是理想的吸附材料, 这些材料可以应用于环境中光气泄漏的防治.     

Calorimetric and IR-spectroscopic study of adsorption of methanol on zeolite-like aluminophosphates

Electrostatic properties of zeolite-like aluminophosphates are intermediate between those of zeolites and zeolite-like silica modifications. The adsorption measurements and IR spectroscopic investigations of the framework vibrations demonstrate that the number of the adsorption complexes of CH₃OH with Al atoms increases in the following order: AlPO₄-5 < AlPO₄-17 AlPO₄-18.The OH vibrations of methanol molecules in the first coordination sphere of the Al atoms are reflected in the IR spectra as an absorption band at 3200 cm^–1, which is not observed for the adsorption of CH₃OH on zeolites.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1937–1942, October, 1995.     

Molecular simulation study on adsorption of methanol/water mixtures in mesoporous silicas modified pore surface silylation

Two types of molecular simulation techniques have been utilized to investigate adsorption of methanol/water mixtures in a mesoporous silica with a hydrophobic pore surface: the NVT-ensemble Molecular Dynamics method with the melt-quench algorithm for modeling a fully-silylated mesoporous silica and the μVT-ensemble Orientaional-Biased Monte Carlo method for calculating adsorption isotherms. Adsorption isotherms of methanol and water at 333 K are calculated for an equi-relative-pressure mixture (each component has the same relative pressure which is defined as the ratio of the partial pressure to the saturation pressure of the pure gas) together with pure gases. In the case of the pure gas, water hardly adsorb even at elevated pressures, while the adsorption isotherm for methanol shows the condensable adsorption. On the other hand, in the case of the mixture, water molecules are substantially adsorbed along with methanol molecules, showing an isotherm representing the condensation mechanism. In addition, it is found that the separation factor of methanol to water is the highest in the case of monolayer adsorption from a liquid mixture.     

Molecular simulation of alkyl monolayers on the Si(111)surface

The structure of twelve-carbon monolayers on the H-terminated Si(111) surface is investigated by molecular simulation method. The best substitution percent on Si(111) surface obtained via molecular mechanics calculation is equal to 50%, and the (8×8) simulated cell can be used to depict the structure of alkyl monolayer on Si surface. After two-dimensional cell containing alkyl chains and four-layer Si(111) crystal at the substitution 50% is constructed, the densely packed and well-ordered monolayer on Si(111) surface can be shown through energy minimization in the suitable-size simulation cell. These simulation results are in good agreement with the experiments. These conclusions show that molecular simulation can provide otherwise inaccessible mesoscopic information at the molecular level, and can be considered as an adjunct to experiments.     

Molecular simulation of alkyl monolayers on the Si(lll) surface

The structure of twelve-carbon monolayers on the H-terminated Si(111) surface is investigated by molecular simulation method. The best substitution percent on Si(111) surface obtained via molecular mechanics calculation is equal to 50%, and the (8 ε 8) simulated cell can be used to depict the structure of alkyl monolayer on Si surface. After two-dimensional cell containing alkyl chains and four-layer Si(111) crystal at the substitution 50% is constructed, the densely packed and well-ordered monolayer on Si(111) surface can be shown through energy minimization in the suitable-size simulation cell. These simulation results are in good agreement with the experiments. These conclusions show that molecular simulation can provide otherwise inaccessible mesoscopic information at the molecular level, and can be considered as an adjunct to experiments.     

聚乙烯在石墨表面结晶的分子动力学模拟

采用分子动力学方法模拟了聚乙烯在石墨(001)表面的吸附和结晶过程;直观的给出了聚乙烯链被石墨(001)面吸附并诱导形成有序的片层晶体的过程;发现结晶温度对得到的有序结构中的聚乙烯链相对石墨表面的特定取向有影响(300 K和600 K时的取向方向不同);表面覆盖率影响聚乙烯吸附层的厚度,对取向的方向无影响.     

碘和氧修饰银(110)表面对甲醇吸附的影响: 密度 泛函理论的计算研究

用密度泛函理论(DFT)的B3-LYP方法和原子簇模型研究了碘和修饰银(110)表面对甲醇吸附的影响。结果表明,甲醇分子在干净的银表面吸附很弱甚至不吸附,但在氧或碘修饰过的银表面上,由于预吸附导致吸附能的增加而变得容易吸附。并进一步采用目前较新的映像电荷模型计算验证了在甲醇部分氧化制甲醛反应中氧或碘对银催化剂表面修饰的本质是电荷修饰这一推论,为实验中如何筛选修饰提供了良好的判据。     

Molecular simulation of alkyl monolayers on the Si(111) surface YUAN

The preparation of monolayers on silicon surface is of growing interest for potential applica-tions in biosensor or semiconductor technology[1—5]. The alkyl modified Si(111) surfaces[6—10] can be obtained using the thermal, catalyzed, or photochemical reaction of hydrogen-terminated sili-con with alkenes, Grignard reagents, and so on. At the same time, the monolayer properties on Si(111) surface have been studied by a variety of experimental methods[8—10] such as X-ray photo-electron spect…     

Comparison of molecular simulation of adsorption with experiment

Experimental measurements of adsorption yield the surface excess. The Gibbs surface excess is the actual or absolute amount of gas contained in the pores less the amount of gas that would be present in the pores in the absence of gas-solid intermolecular forces. Molecular simulation of adsorption yields the absolute amount adsorbed. Comparison of simulated adsorption isotherms and heats of adsorption with experiment requires a conversion from absolute to excess variables. Molecular simulations of adsorption of methane in slit pores at room temperature show large differences between absolute and excess adsorption. The difference between absolute and excess adsorption may be ignored when the pore volume of the adsorbent is negligible compared to the adsorption second virial coefficient (VB _1s ).     

Theoretical study of NO adsorption/dissociation on Pd (100) and (111) surfaces

Both adsorption and dissociation of the diatomic molecular NO on Pd (100) and (111) surfaces are studied using the extended London‐Eyring‐Polyani‐Sato (LEPS) method constructed by means of 5‐MP (the 5‐parameter Morse potential). All critical characteristics of the system that we obtain, such as adsorption geometry, binding energy, eigenvalues for vibration, are in good agreement with the experimental results. On Pd (100) surface, NO prefers to adsorb in fourfold hollow site (H) uprightly at low coverage. With increase in the coverage NO gradually tilts in fourfold hollow and bridge sites. For NO? Pd (111) system, two adsorption states are found at low coverage, of which one adsorption state is the B(tilt) state that the centroid of NO projects at bridge site, another (H? B? H state) that NO almost parallels to the (111) surface with the vibration frequency of 610 cm^?1, but the frequency is near to that of the atoms, which is easy to be ignored in experiments. At high coverage, two transitional states (BH and HT) are found. NO is difficult to dissociate on Pd (100) and (111) surfaces. Especially for NO? Pd (111) system, the three‐well‐potential dissociation mode is initially put forward to show the remarkable dissociation process with two dissociation transitional states of NO on Pd (111). Copyright © 2008 John Wiley & Sons, Ltd.     

Density functional theory for adsorption of HCHO on the FeO（100） surface

The density functional theory (DFT) and periodic slab model were used to get information concerning the adsorption of HCHO on the FeO(100) surface. A preferred η2-(C,O)-di-σ four-membered ring adsorption conformation on the Fe-top site was found to be the most favorable structure with the predicted adsorption energy of 210.7 kJ/mol. The analysis of density of states, Mulliken population, and vibrational frequencies before and after adsorption showed clear weakening of the carbonyl bond, and high sp3 charact...