N掺杂Mo/HZSM-5催化剂制备及对甲烷无氧芳构化催化性能影响

采用三聚氰胺作为N源,N掺杂改性HZSM-5沸石分子筛后负载Mo活性金属组分,制备了一种用于甲烷无氧芳构化反应(MDA)的催化剂.采用XPS、N2吸附-脱附、XRD、H2-TPR、TEM和NH3-TPD对催化剂性质和Mo金属组分状态进行了分析表征,并考察了催化剂的甲烷无氧芳构化反应催化性能.结果表明,HZSM-5经过N...     

分子筛的酸处理对Mo/HZSM-5催化甲烷无氧芳构化反应性能的影响

 采用HNO3溶液对HZSM-5分子筛进行预处理,并以处理后的分子筛为载体制备了Mo/HZSM-5 催化剂. 结果表明,改性的Mo/HZSM-5催化剂在甲烷无氧脱氢芳构化反应中表现出很好的稳定性,显著地抑制了积炭物种在催化剂表面的形成. SEM,XRD和1H MAS NMR等表征结果表明,酸处理在一定程度上降低了HZSM-5分子筛的结晶度,使部分Al物种脱离骨架结构,迁移到骨架外形成新的表面Al羟基,从而使HZSM-5分子筛上B酸中心的数目明显减少. 未经改性的Mo/HZSM-5催化剂表面,平均每个晶胞中有1.12个B酸位,而改性的Mo/HZSM-5催化剂表面,平均每个晶胞中仅有0.88个B酸位. 这表明过多的酸性位存留在催化剂上会引起积炭的生成,降低催化剂的稳定性.     

甲烷无氧芳构化反应催化剂Mo/HZSM-5的H2-TPR研究

 采用H2-TPR技术研究了不同方法制备的Mo/HZSM-5催化剂,并借助 1H MAS NMR等表征手段对Mo/HZSM-5催化剂还原过程中可能出现的6个TPR谱峰进行了详细归属,首次指认了分布于分子筛孔道内并与B酸性位相互作用的Mo物种的还原峰. 此外,还考察了各种Mo基催化剂在甲烷无氧芳构化反应中的催化性能. 结果表明,与B酸中心相互作用的Mo物种比其他形式的Mo物种具有更好的活性和稳定性.     

HZSM-5结晶度和晶粒度对甲烷无氧芳构化催化剂性能的影响

使用高能球磨机通过研磨法制备了Ｍｏ／ＨＺＳＭ－５催化剂，对不同球磨时间下的催化剂结构进行了表征，并考察了其催化甲烷芳构化性能。结果表明，球磨使ＨＺＳＭ－５分子筛的粒度变小，且使Ｍｏ与骨架发生了同晶置换，导致ＺＳＭ－５骨架破坏；球磨时间越长，结晶度越低，其催化甲烷芳构化活性和苯选择性越差。因此，较高的结晶度和较大的晶粒度对甲烷的无氧芳构化反应更有利。     

Mo/HZSM-5催化剂载体对甲烷无氧芳构化反应的影响

着重研究了挤条成型的纳米Mo/HZSM-5催化剂在甲烷无氧芳构化反应中的催化性能.结果表明,Al2O3载体的加入减少了催化剂的B酸量,对甲烷无氧芳构化反应不利,导致甲烷转化率降低,并且催化剂积碳严重.通过适量添加SiO2载体,减少Al2O3载体的量,可以使催化剂的B酸量提高,从而可提高甲烷转化率,并且可降低催化剂的积碳量.     

甲烷在过渡金属离子交换分子筛催化剂上的无氧芳构化

考察了以第四周期过渡金属离子交换改性的ＨＺＳＭ－５为载体的催化剂上甲烷的无氧芳构化性能，并与反应后催化剂上的积炭量进行了关联。过渡金属离子引入ＨＺＳＭ－５的交换位后，起到了助剂作用，抵制了积炭的生成，从而使得催化剂的甲烷芳构化活性和稳定性均得到不同程度的提高，其中以Ｃｕ＾２＋、Ｆｅ＾３＾＋，ＶＯ＾２＋和Ｍｎ＾２＋离子交换改性的ＭｏＯ３／Ｍ－ＨＺＳＭ－５催化剂的活性和稳定性较高。     

金属改性P/HZSM-5分子筛催化乙醇芳构化

以P/HZSM-5分子筛为基础, 通过浸渍法制备了Cr、Co、Cu、Zn等金属改性的M-P/HZSM-5分子筛. 采用X射线衍射(XRD), 比表面积(BET)和氨气程序升温(NH₃-TPD)等方法对其进行了表征, 并考察了其催化乙醇芳构化的活性. 结果表明, 改性后的ZSM-5分子筛保持原有的骨架结构, 但比表面积降低, 酸性分布发生变化; Cu-P/HZSM-5分子筛有较高催化活性. P和Cu的负载量分别为3%和5%, 先浸渍P再浸渍Cu, 反应温度400 °C, 质量空速(WHSV)为1.0 h^-1时轻质芳烃(BTX)收率可达到57.6%.     

Mo-Zn/HZSM-5催化剂上甲烷与丙烷混合物的无氧芳构化

研究了甲烷和丙烷的混合气体在x%Mo+6%Zn/HZSM-5催化剂上(x=0.3,0.5,0.7,0.9)的无氧芳构化反应性能.结果表明,在873K,GHSV=3L/(g·h)和n(C₁)/n(C₃)=1.0条件下,甲烷的转化率在29%～35%之间,芳烃选择性大于80%.其中0.7%Mo+6%Zn/HZSM-5对甲烷表现出最优的活性,甲烷转化率达到34.8%,丙烷转化率为69.6%.探讨了反应时间和n(C₁)/n(C₃)比对甲烷和丙烷转化率及其产物分布的影响.结果显示,丙烷的存在促使甲烷活化并参与芳构化反应.同位素13^CH₄示踪实验发现,13^C进入了C₆H₆⁺,C₇H₈⁺和C₈H₁₀⁺碎片中,进一步证实了甲烷进入芳烃形成过程.此种用丙烷活化甲烷的过程可能为天然气和炼厂气的直接利用提供了一个新的反应途径.     

烯烃在HZSM-5分子筛上原位芳构化反应的研究

烯烃在ZSM-5分子筛上转化成芳烃的反应是一个非常复杂的反应,既包括聚合裂解反应,又包括氢转移、脱氢环化反应,同时也包括烷基转移和脱烷基等反应,对于这一复杂反应的机理研究较少.Vedrine等人[1]认为烯烃首先在酸性位上通过氢转移生成戊二烯正碳离子,接着环化以及扩环反应生成     

Activation of Mo/HZSM-5 for methane aromatization

The effect of Mo/HZSM-5 pretreatment at 973 K in inert (He), oxidizing (artificial air), and carbu-rizing (CH4/He mixture) atmospheres on its performance in non-oxidative methane dehydroaroma-tization (MDA) was investigated. The effect of post-synthesis silylation on deactivation of external acid sites was also studied. Precarburization resulted in increased aromatic selectivity and im-proved catalyst stability. The benzene selectivity was the highest for the silylated Mo/HZSM-5 cata-lyst (benzene+naphthalene selectivity after 1 h on stream was close to 100%). The deactivation of precarburized zeolites was less pronounced than that of zeolites heated in air or He. During heating in air or He, larger fractions of the molybdenum oxide species diffused into the micropores than during heating in methane. Carburization of the molybdenum oxide species in the micropores dur-ing MDA resulted in the formation of molybdenum carbide particles, and these contributed to pore blocking, making the Br?nsted acid sites inaccessible. The formation of molybdenum carbides dur-ing heating in methane resulted in a less mobile Mo phase. It is argued that the presence of molyb-denum carbide particles in the micropores contributes to rapid catalyst deactivation, in addition to the formation of hard coke on the external surface.     

多级孔IM-5分子筛的简易制备及其在甲烷芳构化中的催化性能

采用一步水热晶化法、不添加第二模板剂、仅通过控制合成条件,制备了具有多级孔道结构的IM-5-H分子筛。多级孔IM-5-H材料展现了与常规IM-5-C分子筛不同的形貌、结构和酸性质。由于IM-5-H分子筛载体介孔结构的促进作用,钼基Mo-IM-5-H催化剂在甲烷无氧芳构化反应中表现出较高的甲烷转化率（13.1%）、芳烃产率（7.5%）和稳定性。该研究为合成多级孔IM-5材料提供了一种简便的方法,同时扩展了微孔-介孔复合材料在甲烷芳构化反应中的应用。     

Influence of Pretreatment Conditions on Methane Aromatization Performance of Mo／HZSM—5 and Mo—Cu／HZSM—5 Catalysts

Mo/HZSM-5 is a good catalyst for methane aromatization, and the reaction performance of Mo/HZSM-5 and Cu modified Mo/HZSM-5 catalysts under various pretreatment conditions has been studied. The results indicate that the catalyst presented a distinguished catalytic activity, benzene selectivity and a high stability when the bed temperature was raised in N2 atmosphere.     

Synthesis of HZSM-5 zeolites with excellent DME aromatization properties by orthogonal test

Abstract

The synthesis conditions of HZSM-5 zeolite, including crystallization temperature, crystallization time and raw material ratio, were investigated by L₃₂ (4⁸) orthogonal test to specifically optimize its performance in dimethyl ether (DME) aromatization for the first time. Based on the total yield of aromatic products, the synthesis conditions of HZSM-5 zeolite with the best DME aromatization properties were obtained by comprehensive analysis and validation experiments. The relationship between the aromatization performance, crystalline structure, pore structure, and acidity of HZSM-5 zeolite were analyzed. The results showed that the HZSM-5 zeolite accompanied by hierarchical structure, an appropriate Brønsted and Lewis acid content and uniform crystal morphology, was successfully synthesized under optimized conditions. Over this unmodified and un-doped catalyst, the conversion of DME approached to 99.3% and the total yield of aromatics reached was 53.5%.     

CH_4在Mo/HZSM-5及其改性催化剂上的无氧芳构化(英文)

运用微型固定床反应器装置,研究了Mo/HZSM-5催化剂的Mo载量、金属助剂改性、载体模数对甲烷无氧芳构化反应性能的影响。结果表明,Ni/Mo摩尔比为0.1的Mo-Ni/HZSM-5(SiO2/Al2O3=25)催化性能最好,其稳定性较好,芳烃收率最高可达15.74%;此时甲烷转化率60.24%,芳烃选择性26.13%。     

Effect of Preparation Techniques of Y-Mo／HZSM-5 on Its Activity in Methane Aromatization

The production of benzene directly from methane aromatization under oxygen-free conditionis currently a new focus in natural gas utilization. The influence of preparation techniques of the catalystson their catalytic activities is studied in this paper. The influencing factors include the impregnatingmethod, the calcination temperature, the promoter content and the acidity of the zeolite support. Optimumpreparation techniques for the catalysts are obtained through this work.     

四丙基氢氧化铵改性纳米HZSM-5分子筛及其在甲醇制汽油中的催化性能

采用四丙基氢氧化铵(TPAOH)溶液对纳米ZSM-5分子筛进行改性, 运用X射线衍射、扫描电镜、²⁷Al和²⁹Si固体核磁、X射线光电子能谱、N₂物理吸附脱附法和NH₃程序升温脱附等手段对所制样品进行了表征, 并评价了其催化甲醇制汽油反应性能. 结果表明, 改性后的HZSM-5相对结晶度增加, 晶体形貌更加规整, 表面硅铝比增加, 比表面积和微孔表面积增大, 强酸位酸量增多. 同时, TPAOH改性不仅可以使分子筛脱硅脱铝, 而且伴有二次晶化补硅补铝, 改变了分子筛的硅铝分布. 改性的HZSM-5在甲醇制汽油反应中的稳定性大幅度提高, 其寿命由70h增至170h以上, 随着TPAOH处理时间的增加, 催化剂寿命增加, 氢转移反应加快, 导致油相产品中异构烷烃增多, 烯烃减少.     

Effect of Fe-Mo promoters on HZSM-5 zeolite catalyst for 1-hexene aromatization

The promotional effect of Fe-Mo species introduced into HZSM-5 (Zeolyst Int., SiO₂/Al₂O₃ ≈ 30) zeolite catalyst by the wetness impregnation method for the 1-hexene aromatization was investigated. The structure and catalytic performance for the aromatization of 1-hexene over xFeyMo-ZSM-5 catalysts in comparison with unmodified HZSM-5 catalysts were studied. The xFeyMo-ZSM-5 catalysts contain fixed loading (5 wt%) and variable Fe/Mo ratio. The catalysts were characterized by BET, ICP-AES, HRSEM-EDS, HRTEM, XRD, FTIR, H₂-TPR, NH₃-TPD, and pyridine DRIFT spectroscopy. The characterization data confirmed the existence of Fe and Mo species in the zeolite matrix. With Fe and Mo species implementation to HZSM-5 zeolite, the amount of the acid sites decreased, but the selectivities to C₉₊ aromatics increased. The catalyst evaluation was performed at 350 °C for 6 h on-stream at atmospheric pressure using a fixed-bed quartz tube reactor. The selectivity to products of different carbon number was affected by the Fe/Mo ratio within the zeolite. It was found the product distribution of grouped fractions of C₁–C₁₇₊ from the liquid product. The results indicate that the optimum ratio of Fe/Mo is 1–1.5. The highest selectivity for gasoline and distillate ranges was obtained for the 2.5wt%Fe2.5wt%Mo- and 3wt%Fe2wt%Mo-ZSM-5 samples, which was higher than that for parent HZSM-5 catalyst.     

Ga、Zn改性方法对HZSM-5催化剂丙烯芳构化性能的影响

以浸渍法和水热合成法对ZSM-5分子筛进行Ga、Zn改性,制得不同酸性的分子筛催化剂。采用XRD、SEM、NH3-TPD和XPS等表征手段,研究考察了Ga、Zn和不同引入方法对催化剂的孔结构、骨架结构特性和表面酸性的影响,并以丙烯芳构化为模型反应,考察了Ga、Zn改性对ZSM-5催化剂烯烃芳构化催化性能的影响。研究结果表明,Ga、Zn改性对催化剂形貌影响较小,但能明显改变催化剂的表面酸性和烯烃芳构化性能。Zn改性能降低催化剂的酸性,而Ga改性与其引入的方式有关,浸渍法引入催化剂的中强酸位略有下降,而水热合成法引入则显著增加了催化剂的总酸量。Ga、Zn改性均提高了芳构化反应的活性和芳烃选择性,并抑制催化剂表面积炭。