等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

基于碳纳米材料的神经电极技术

As a powerful tool for monitoring and modulating neural activities, implantable neural electrodes constitute the basis for a wide range of applications, including fundamental studies of brain circuits and functions, treatment of various neurological diseases, and realization of brain-machine interfaces. However, conventional neural electrodes have the issue of mechanical mismatch with soft neural tissues, which can result in tissue inflammation and gliosis, thus causing degradation of function over chronic implantation. Furthermore, implantable neural electrodes, especially depth electrodes, can only carry out limited data sampling within predefined anatomical regions, making it challenging to perform large-area brain mapping. With excellent electrical, mechanical, and chemical properties, carbon-based nanomaterials, including graphene and carbon nanotubes (CNTs), have been used as materials of implantable neural electrodes in recent years. Electrodes made from graphene and CNT fibers exhibit low electrochemical impedance, benefiting from the porous microstructure of the fibers. This enables a much smaller size of neural electrode. Together with the low Young's modulus of the fibers, this small size results in very soft electrodes. Soft neural electrodes made from graphene and CNT fibers show a much-reduced inflammatory response and enable stable chronic in vivo action potential recording for 4-5 months. Combining different modalities of neural interfacing, including electrophysiological measurement, optical imaging/stimulation, and magnetic resonance imaging (MRI), could leverage the spatial and temporal resolution advantages of different techniques, thus providing new insights into how neural circuits process information. Transparent neural electrode arrays made from graphene or CNTs enable simultaneous calcium imaging through the transparent electrodes, from which concurrent electrical recording is taken, thus providing complementary cellular information in addition to high-temporal-resolution electrical recording. Transparent neural electrodes from carbon-based nanomaterials can record well-defined neuronal response signals with negligible light-induced artifacts from cortical surfaces under optogenetic stimulation. Graphene and CNT-based materials were used to fabricate MRI-compatible neural electrodes with negligible artifacts under high field MRI. Simultaneous deep brain stimulation (DBS) and functional magnetic resonance imaging (fMRI) with graphene fiber electrodes in the subthalamic nucleus (STN) in Parkinsonian rats revealed robust blood oxygenation level dependent responses along the basal ganglia-thalamocortical network in a frequency-dependent manner, with responses from some regions not previously detectable. This review introduces the recent development and application of neural electrode technologies based on graphene and CNTs. We also discuss biological safety issues and challenges faced by neural electrodes made from carbon nanomaterials. The use of carbon-based nanomaterials for the fabrication of various soft and multi-modality compatible neural electrodes will provide a powerful platform for both fundamental and translational neuroscience research.     

改进的人工神经网络在传感器阵列信号处理中的应用

本文提出传感器阵列信号处理的人工神经网络模型，以Cu^ 2/Ca^ 2系统为研究对象．尝试了神经网络方法的效果。其最大相对误差不超过5．％，最大相对预测误差不超过2．4％，结果表明，该方法性能良好，在各种传感器阵列的信号处理方面有广泛的应用前景。     

植入式光电极器件发展

Optogenetics transforms specific types of neurons through genetic engineering to achieve the cell membrane expression of photosensitive channel protein. When a specific wavelength of light irradiates the photosensitive channel protein, the cell is either excited or inhibited. Optogenetics provides a precise and fast method to control the activity of individual neurons for neuroscience research, which has gained increasing attention as a means of neural regulation. To realize the photogenetic regulation of neurons, light should be introduced into the brain safely and efficiently. Thus, specialized photoelectric devices are needed. Optrode plays a significant role in the application of optogenetics tools, which is the technical basis for the application of optogenetics. Optrode is a kind of implantable neural interface device. It can introduce light into the brain to regulate neural activity and record the changes of neural electrical signals under the control of lights. As the research of optogenetic technology continues, More and more optrodes are being developed and applied in the study of neuroscience and diseases, such as neural circuit, cognition and memory, epilepsy, and sensory function damage. The combination of optrode with optogenetic technologies provides various developmental modes in terms of material selection, device structure, light supply method, and integrated ways. The difficulty in fabricating optrodes lies in performing light stimulation and electrical signal recording without causing the immune rejection of the test animal and affecting its normal physiological activities simultaneously. In this study, based on structural characteristics and manufacturing process, optrodes are classified into two categories: waveguide-based and micro-light emitting diode-based. Subsequently, based on manufacturing process and light supply method, waveguide-based optrodes are further divided into optical fiber-optrode, optical waveguide-optrode based on MENS technology, and LD/LED waveguide-optrode. Similarly, micro-light emitting diode-based optrodes are divided into hard μLED optrode and soft μLED optrode. The advantages and disadvantages of different types of optrodes, as well as the evolution direction, are reviewed and summarized. Additionally, problems with existing optrodes, such as signal quality, biocompatibility, and device reliability, are discussed. Further, the ideal form of the device is presented as possessing the following characteristics: μLED and recording electrode integrated on flexible substrate, small size, high spatial resolution, high biocompatibility, wireless energy supply, wireless data transmission, etc. As optrode technologies are continuously updated, in the application of optogenetic technologies, research on brain neural circuit and functional structure will be better studied, and various nerve diseases will be gradually tamed.     

微纳电极阵列检测丘脑底核电刺激引起的纹状体神经元活动变化

丘脑底核(STN)深部脑刺激(DBS)已成为帕金森病的重要外科治疗手段,然而其确切的作用机理尚不明确.本研究采用微机电系统(MEMS)技术制备了一种16通道植入式微电极阵列(MEA),在MEA表面修饰了铂黑-还原氧化石墨烯-Nafion膜(Pt/RGO/Nafion)纳米材料,用于同步检测麻醉大鼠脑内纹状体神经元在STN电刺激前后多巴胺(DA)含量和动作电位(Spike)发放变化.STN-DBS结果表明,电刺激20 s后,DA含量开始升高,最高达1.72 μmol/L,较高浓度状态保持约50 s后回落至正常水平.与此同时, 检测到在DA上升阶段中间神经元Spike发放活动增强,在保持高于DA正常浓度水平阶段,中等多棘神经元(MSNs)放电频率增加.本研究制备的微电极阵列传感器能够实现脑内多巴胺和电生理的原位实时检测,有望成为神经信息检测的有力工具.     

Screen-printed multienzyme arrays for use in amperometric batch and flow systems

Screen-printing technology for electrode fabrication enables construction of amperometric devices suitable for combination of several enzyme electrodes. To develop a biosensor array for characterisation of wastewaters, tyrosinase and horseradish peroxidase (HRP) or cholinesterase-modified electrodes were combined on the same array. The behaviour of the tyrosinase-modified electrode in the presence of hydrogen peroxide (required co-substrate for the HRP-modified electrode) and acetylthiocholine chloride (required co-substrate for cholinesterase) was studied. Performance of bi-enzyme biosensor arrays in the batch mode and in the flow-injection system are discussed.     

导电高分子在神经界面电极中的应用

神经界面电极作为人体和外部器件间信息融合的媒介, 为人们进一步探究神经系统高级功能的机制提供了有效工具. 传统的神经电极多以金属和半导体材料为主, 这两类材料因具有惰性材料的特性及优越的 导电性能而成为早期神经电极的主要制备材料, 但由于其刚性过大和光滑表面导致的机械失配及与生物组织间过高的电化学阻抗限制了神经电极的进一步发展. 导电高分子作为一种有机导电材料, 同时具备柔软性 (杨氏模量约在0.01~10 GPa)和导电性(高掺杂度的导电高分子的电导率在金属范围, 10⁰~10⁵ S/cm)的特征, 是制备神经电极的有效材料. 近年来, 人们利用导电高分子材料对传统电极材料进行改性甚至替代, 以提高电极比表面积、 减小界面阻抗, 并提高电极检测的灵敏性; 同时减小电极与组织间的应变失配, 减少炎症反应, 并进一步在导电高分子中引入功能性生物大分子, 减少生物组织对电极的排异反应, 增加电极在体内长期植入的稳定性. 本文讨论和总结了导电高分子材料在神经电极中的应用, 分别对导电高分子作为涂层修饰神经电极、 全导电高分子材料神经电极及导电高分子复合材料神经电极等展开讨论, 分析了导电高分子在神经界面电极中的应用前景及存在的问题, 以期对神经界面电极在脑科学和生物电子医疗等前沿领域的进一步发展提供参考.     

传感器阵列信号处理的人工神经网络方法

本文提出传感器阵列信号处理的人工神经网络方法,并以K~+/Ca~(2+)/NO_3~-/Cl~-阵列系统为对象,尝试了该方法的效果。结果表明,其拟合最大相对误差不超过7.4％,预测最大相对误差不超过6.9％。可见,其性能良好,可望成为各种传感器阵列信号处理的有用工具。     

Ultra Compact Nanoporous Platinum Coating Improves Neural Recording

Neural electrodes are key tools for achieving a successful brain-computer interface and the electrodes should be small to minimize damage to neural tissue and obtain good spatial selectivity such as single unit recording. Here we show conventional platinum/tungsten neural probes can be coated with nanoporous Pt. Thanks to nanoporous Pt with the extremely small and uniform pores, L₂-ePt, the electrode impedance could be reduced by more than 2 orders of magnitude while the apparent area was almost the same. L₂-ePt coating enhanced neuronal recording of local field potential in monkeys, leading to facilitating implanted electrical devices in the nervous system.     

Electroanalysis in flowing systems – the propagation of depletion effects downstream of a channel micro-band electrode

Analytical and numerical methods are used to establish concentration distributions around channel microband electrodes both in isolation and as part of multi-electrode arrays. The importance of axial diffusion in addition to convection and diffusion normal to the electrode surface is stressed. In particular, downstream depletion effects are shown to occur over many electrode lengths, so that the diffusion fields of electrodes within arrays overlap and interfere. A simple analytical expression is derived to describe this depletion and permits the design of practical arrays in which electrodes operate essentially independently of each other.     

3D‐printed Metal Electrodes for Heavy Metals Detection by Anodic Stripping Voltammetry

Heavy metals, being one of the most toxic and hazardous pollutants in natural water, are of great public health concern. Much effort is still being devoted to the optimization of the electroanalytical methods and devices, particularly for the development of novel electrode materials in order to enhance selectivity and sensitivity for the analysis of heavy metals. The ability of 3D‐printing to fabricate objects with unique structures and functions enables infinite possibilities for the creation of custom‐made electrochemical devices. Here, stainless steel 3D‐printed electrodes (3D‐steel) have been tested for individual and simultaneous square wave anodic stripping analysis of Pb and Cd in aqueous solution. Electrodeposition methods have also been employed to modify the steel electrode surface by coating with a thin gold film (3D−Au) or a bismuth film (3D−Bi) to enhance the analytical performance. All 3D‐printed electrodes (3D‐steel, 3D−Au and 3D−Bi) have been tested against a conventionally employed glassy carbon electrode (GC) for comparison. The surface modified electrodes (3D−Au and 3D−Bi) outperformed the GC electrode demonstrating higher sensitivity over the studied concentration ranges of 50–300 and 50–500 ppb for Pb and Cd, respectively. Owing to the bismuth property of binary alloys formation with heavy metals, 3D−Bi electrode displayed well‐defined, reproducible signals with relatively low detection limits of 3.53 and 9.35 ppb for Pb and Cd, respectively. The voltammetric behaviour of 3D−Bi electrode in simultaneous detection of Pb and Cd, as well as in individual detection of Pb in tap water was also monitored. Overall, 3D‐printed electrodes exhibited promising qualities for further investigation on a more customizable electrode design.